Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/translation-table.c
	net/ipv6/route.c

qmi_wwan.c resolution provided by Bjørn Mork.

batman-adv conflict is dealing merely with the changes
of global function names to have a proper subsystem
prefix.

ipv6's route.c conflict is merely two side-by-side additions
of network namespace methods.

Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index f1e7791..68ca676 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -269,29 +269,6 @@
 	return rv;
 }
 
-/* Gobi devices uses identical class/protocol codes for all interfaces regardless
- * of function. Some of these are CDC ACM like and have the exact same endpoints
- * we are looking for. This leaves two possible strategies for identifying the
- * correct interface:
- *   a) hardcoding interface number, or
- *   b) use the fact that the wwan interface is the only one lacking additional
- *      (CDC functional) descriptors
- *
- * Let's see if we can get away with the generic b) solution.
- */
-static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf)
-{
-	int rv = -EINVAL;
-
-	/* ignore any interface with additional descriptors */
-	if (intf->cur_altsetting->extralen)
-		goto err;
-
-	rv = qmi_wwan_bind_shared(dev, intf);
-err:
-	return rv;
-}
-
 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct qmi_wwan_state *info = (void *)&dev->data;
@@ -375,15 +352,15 @@
 	.manage_power	= qmi_wwan_manage_power,
 };
 
-static const struct driver_info	qmi_wwan_gobi = {
-	.description	= "Qualcomm Gobi wwan/QMI device",
+static const struct driver_info	qmi_wwan_force_int0 = {
+	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
-	.bind		= qmi_wwan_bind_gobi,
+	.bind		= qmi_wwan_bind_shared,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
+	.data		= BIT(0), /* interface whitelist bitmap */
 };
 
-/* ZTE suck at making USB descriptors */
 static const struct driver_info	qmi_wwan_force_int1 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
@@ -393,6 +370,15 @@
 	.data		= BIT(1), /* interface whitelist bitmap */
 };
 
+static const struct driver_info	qmi_wwan_force_int3 = {
+	.description	= "Qualcomm WWAN/QMI device",
+	.flags		= FLAG_WWAN,
+	.bind		= qmi_wwan_bind_shared,
+	.unbind		= qmi_wwan_unbind,
+	.manage_power	= qmi_wwan_manage_power,
+	.data		= BIT(3), /* interface whitelist bitmap */
+};
+
 static const struct driver_info	qmi_wwan_force_int4 = {
 	.description	= "Qualcomm WWAN/QMI device",
 	.flags		= FLAG_WWAN,
@@ -418,16 +404,23 @@
 static const struct driver_info	qmi_wwan_sierra = {
 	.description	= "Sierra Wireless wwan/QMI device",
 	.flags		= FLAG_WWAN,
-	.bind		= qmi_wwan_bind_gobi,
+	.bind		= qmi_wwan_bind_shared,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
 	.data		= BIT(8) | BIT(19), /* interface whitelist bitmap */
 };
 
 #define HUAWEI_VENDOR_ID	0x12D1
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+	USB_DEVICE(vend, prod), \
+	.driver_info = (unsigned long)&qmi_wwan_force_int3
+
+/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
 #define QMI_GOBI_DEVICE(vend, prod) \
 	USB_DEVICE(vend, prod), \
-	.driver_info = (unsigned long)&qmi_wwan_gobi
+	.driver_info = (unsigned long)&qmi_wwan_force_int0
 
 static const struct usb_device_id products[] = {
 	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */
@@ -538,20 +531,24 @@
 		.bInterfaceProtocol = 0xff,
 		.driver_info        = (unsigned long)&qmi_wwan_sierra,
 	},
-	{QMI_GOBI_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{QMI_GOBI_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{QMI_GOBI_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{QMI_GOBI_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+
+	/* Gobi 1000 devices */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
+	{QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+
+	/* Gobi 2000 and 3000 devices */
 	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
 	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */