|  | /* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027) | 
|  | * receiver. | 
|  | * | 
|  | * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn> | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or modify it | 
|  | *	under the terms of the GNU General Public License as published by the Free | 
|  | *	Software Foundation, version 2. | 
|  | * | 
|  | * see Documentation/dvb/README.dvb-usb for more information | 
|  | */ | 
|  | #include "az6027.h" | 
|  |  | 
|  | #include "stb0899_drv.h" | 
|  | #include "stb0899_reg.h" | 
|  | #include "stb0899_cfg.h" | 
|  |  | 
|  | #include "stb6100.h" | 
|  | #include "stb6100_cfg.h" | 
|  | #include "dvb_ca_en50221.h" | 
|  |  | 
|  | int dvb_usb_az6027_debug; | 
|  | module_param_named(debug, dvb_usb_az6027_debug, int, 0644); | 
|  | MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); | 
|  |  | 
|  | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | 
|  |  | 
|  | struct az6027_device_state { | 
|  | struct dvb_ca_en50221 ca; | 
|  | struct mutex ca_mutex; | 
|  | u8 power_state; | 
|  | }; | 
|  |  | 
|  | static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = { | 
|  |  | 
|  | /* 0x0000000b, SYSREG */ | 
|  | { STB0899_DEV_ID		, 0x30 }, | 
|  | { STB0899_DISCNTRL1		, 0x32 }, | 
|  | { STB0899_DISCNTRL2     	, 0x80 }, | 
|  | { STB0899_DISRX_ST0     	, 0x04 }, | 
|  | { STB0899_DISRX_ST1     	, 0x00 }, | 
|  | { STB0899_DISPARITY     	, 0x00 }, | 
|  | { STB0899_DISSTATUS		, 0x20 }, | 
|  | { STB0899_DISF22        	, 0x99 }, | 
|  | { STB0899_DISF22RX      	, 0xa8 }, | 
|  | /* SYSREG ? */ | 
|  | { STB0899_ACRPRESC      	, 0x11 }, | 
|  | { STB0899_ACRDIV1       	, 0x0a }, | 
|  | { STB0899_ACRDIV2       	, 0x05 }, | 
|  | { STB0899_DACR1         	, 0x00 }, | 
|  | { STB0899_DACR2         	, 0x00 }, | 
|  | { STB0899_OUTCFG        	, 0x00 }, | 
|  | { STB0899_MODECFG       	, 0x00 }, | 
|  | { STB0899_IRQSTATUS_3		, 0xfe }, | 
|  | { STB0899_IRQSTATUS_2		, 0x03 }, | 
|  | { STB0899_IRQSTATUS_1		, 0x7c }, | 
|  | { STB0899_IRQSTATUS_0		, 0xf4 }, | 
|  | { STB0899_IRQMSK_3      	, 0xf3 }, | 
|  | { STB0899_IRQMSK_2      	, 0xfc }, | 
|  | { STB0899_IRQMSK_1      	, 0xff }, | 
|  | { STB0899_IRQMSK_0		, 0xff }, | 
|  | { STB0899_IRQCFG		, 0x00 }, | 
|  | { STB0899_I2CCFG        	, 0x88 }, | 
|  | { STB0899_I2CRPT        	, 0x58 }, | 
|  | { STB0899_IOPVALUE5		, 0x00 }, | 
|  | { STB0899_IOPVALUE4		, 0x33 }, | 
|  | { STB0899_IOPVALUE3		, 0x6d }, | 
|  | { STB0899_IOPVALUE2		, 0x90 }, | 
|  | { STB0899_IOPVALUE1		, 0x60 }, | 
|  | { STB0899_IOPVALUE0		, 0x00 }, | 
|  | { STB0899_GPIO00CFG     	, 0x82 }, | 
|  | { STB0899_GPIO01CFG     	, 0x82 }, | 
|  | { STB0899_GPIO02CFG     	, 0x82 }, | 
|  | { STB0899_GPIO03CFG     	, 0x82 }, | 
|  | { STB0899_GPIO04CFG     	, 0x82 }, | 
|  | { STB0899_GPIO05CFG     	, 0x82 }, | 
|  | { STB0899_GPIO06CFG     	, 0x82 }, | 
|  | { STB0899_GPIO07CFG     	, 0x82 }, | 
|  | { STB0899_GPIO08CFG     	, 0x82 }, | 
|  | { STB0899_GPIO09CFG     	, 0x82 }, | 
|  | { STB0899_GPIO10CFG     	, 0x82 }, | 
|  | { STB0899_GPIO11CFG     	, 0x82 }, | 
|  | { STB0899_GPIO12CFG     	, 0x82 }, | 
|  | { STB0899_GPIO13CFG     	, 0x82 }, | 
|  | { STB0899_GPIO14CFG     	, 0x82 }, | 
|  | { STB0899_GPIO15CFG     	, 0x82 }, | 
|  | { STB0899_GPIO16CFG     	, 0x82 }, | 
|  | { STB0899_GPIO17CFG     	, 0x82 }, | 
|  | { STB0899_GPIO18CFG     	, 0x82 }, | 
|  | { STB0899_GPIO19CFG     	, 0x82 }, | 
|  | { STB0899_GPIO20CFG     	, 0x82 }, | 
|  | { STB0899_SDATCFG       	, 0xb8 }, | 
|  | { STB0899_SCLTCFG       	, 0xba }, | 
|  | { STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */ | 
|  | { STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */ | 
|  | { STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */ | 
|  | { STB0899_DIRCLKCFG     	, 0x82 }, | 
|  | { STB0899_CLKOUT27CFG   	, 0x7e }, | 
|  | { STB0899_STDBYCFG      	, 0x82 }, | 
|  | { STB0899_CS0CFG        	, 0x82 }, | 
|  | { STB0899_CS1CFG        	, 0x82 }, | 
|  | { STB0899_DISEQCOCFG    	, 0x20 }, | 
|  | { STB0899_GPIO32CFG		, 0x82 }, | 
|  | { STB0899_GPIO33CFG		, 0x82 }, | 
|  | { STB0899_GPIO34CFG		, 0x82 }, | 
|  | { STB0899_GPIO35CFG		, 0x82 }, | 
|  | { STB0899_GPIO36CFG		, 0x82 }, | 
|  | { STB0899_GPIO37CFG		, 0x82 }, | 
|  | { STB0899_GPIO38CFG		, 0x82 }, | 
|  | { STB0899_GPIO39CFG		, 0x82 }, | 
|  | { STB0899_NCOARSE       	, 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ | 
|  | { STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ | 
|  | { STB0899_FILTCTRL      	, 0x00 }, | 
|  | { STB0899_SYSCTRL       	, 0x01 }, | 
|  | { STB0899_STOPCLK1      	, 0x20 }, | 
|  | { STB0899_STOPCLK2      	, 0x00 }, | 
|  | { STB0899_INTBUFSTATUS		, 0x00 }, | 
|  | { STB0899_INTBUFCTRL    	, 0x0a }, | 
|  | { 0xffff			, 0xff }, | 
|  | }; | 
|  |  | 
|  | static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = { | 
|  | { STB0899_DEMOD         	, 0x00 }, | 
|  | { STB0899_RCOMPC        	, 0xc9 }, | 
|  | { STB0899_AGC1CN        	, 0x01 }, | 
|  | { STB0899_AGC1REF       	, 0x10 }, | 
|  | { STB0899_RTC			, 0x23 }, | 
|  | { STB0899_TMGCFG        	, 0x4e }, | 
|  | { STB0899_AGC2REF       	, 0x34 }, | 
|  | { STB0899_TLSR          	, 0x84 }, | 
|  | { STB0899_CFD           	, 0xf7 }, | 
|  | { STB0899_ACLC			, 0x87 }, | 
|  | { STB0899_BCLC          	, 0x94 }, | 
|  | { STB0899_EQON          	, 0x41 }, | 
|  | { STB0899_LDT           	, 0xf1 }, | 
|  | { STB0899_LDT2          	, 0xe3 }, | 
|  | { STB0899_EQUALREF      	, 0xb4 }, | 
|  | { STB0899_TMGRAMP       	, 0x10 }, | 
|  | { STB0899_TMGTHD        	, 0x30 }, | 
|  | { STB0899_IDCCOMP		, 0xfd }, | 
|  | { STB0899_QDCCOMP		, 0xff }, | 
|  | { STB0899_POWERI		, 0x0c }, | 
|  | { STB0899_POWERQ		, 0x0f }, | 
|  | { STB0899_RCOMP			, 0x6c }, | 
|  | { STB0899_AGCIQIN		, 0x80 }, | 
|  | { STB0899_AGC2I1		, 0x06 }, | 
|  | { STB0899_AGC2I2		, 0x00 }, | 
|  | { STB0899_TLIR			, 0x30 }, | 
|  | { STB0899_RTF			, 0x7f }, | 
|  | { STB0899_DSTATUS		, 0x00 }, | 
|  | { STB0899_LDI			, 0xbc }, | 
|  | { STB0899_CFRM			, 0xea }, | 
|  | { STB0899_CFRL			, 0x31 }, | 
|  | { STB0899_NIRM			, 0x2b }, | 
|  | { STB0899_NIRL			, 0x80 }, | 
|  | { STB0899_ISYMB			, 0x1d }, | 
|  | { STB0899_QSYMB			, 0xa6 }, | 
|  | { STB0899_SFRH          	, 0x2f }, | 
|  | { STB0899_SFRM          	, 0x68 }, | 
|  | { STB0899_SFRL          	, 0x40 }, | 
|  | { STB0899_SFRUPH        	, 0x2f }, | 
|  | { STB0899_SFRUPM        	, 0x68 }, | 
|  | { STB0899_SFRUPL        	, 0x40 }, | 
|  | { STB0899_EQUAI1		, 0x02 }, | 
|  | { STB0899_EQUAQ1		, 0xff }, | 
|  | { STB0899_EQUAI2		, 0x04 }, | 
|  | { STB0899_EQUAQ2		, 0x05 }, | 
|  | { STB0899_EQUAI3		, 0x02 }, | 
|  | { STB0899_EQUAQ3		, 0xfd }, | 
|  | { STB0899_EQUAI4		, 0x03 }, | 
|  | { STB0899_EQUAQ4		, 0x07 }, | 
|  | { STB0899_EQUAI5		, 0x08 }, | 
|  | { STB0899_EQUAQ5		, 0xf5 }, | 
|  | { STB0899_DSTATUS2		, 0x00 }, | 
|  | { STB0899_VSTATUS       	, 0x00 }, | 
|  | { STB0899_VERROR		, 0x86 }, | 
|  | { STB0899_IQSWAP		, 0x2a }, | 
|  | { STB0899_ECNT1M		, 0x00 }, | 
|  | { STB0899_ECNT1L		, 0x00 }, | 
|  | { STB0899_ECNT2M		, 0x00 }, | 
|  | { STB0899_ECNT2L		, 0x00 }, | 
|  | { STB0899_ECNT3M		, 0x0a }, | 
|  | { STB0899_ECNT3L		, 0xad }, | 
|  | { STB0899_FECAUTO1      	, 0x06 }, | 
|  | { STB0899_FECM			, 0x01 }, | 
|  | { STB0899_VTH12         	, 0xb0 }, | 
|  | { STB0899_VTH23         	, 0x7a }, | 
|  | { STB0899_VTH34			, 0x58 }, | 
|  | { STB0899_VTH56         	, 0x38 }, | 
|  | { STB0899_VTH67         	, 0x34 }, | 
|  | { STB0899_VTH78         	, 0x24 }, | 
|  | { STB0899_PRVIT         	, 0xff }, | 
|  | { STB0899_VITSYNC       	, 0x19 }, | 
|  | { STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ | 
|  | { STB0899_TSULC         	, 0x42 }, | 
|  | { STB0899_RSLLC         	, 0x41 }, | 
|  | { STB0899_TSLPL			, 0x12 }, | 
|  | { STB0899_TSCFGH        	, 0x0c }, | 
|  | { STB0899_TSCFGM        	, 0x00 }, | 
|  | { STB0899_TSCFGL        	, 0x00 }, | 
|  | { STB0899_TSOUT			, 0x69 }, /* 0x0d for CAM */ | 
|  | { STB0899_RSSYNCDEL     	, 0x00 }, | 
|  | { STB0899_TSINHDELH     	, 0x02 }, | 
|  | { STB0899_TSINHDELM		, 0x00 }, | 
|  | { STB0899_TSINHDELL		, 0x00 }, | 
|  | { STB0899_TSLLSTKM		, 0x1b }, | 
|  | { STB0899_TSLLSTKL		, 0xb3 }, | 
|  | { STB0899_TSULSTKM		, 0x00 }, | 
|  | { STB0899_TSULSTKL		, 0x00 }, | 
|  | { STB0899_PCKLENUL		, 0xbc }, | 
|  | { STB0899_PCKLENLL		, 0xcc }, | 
|  | { STB0899_RSPCKLEN		, 0xbd }, | 
|  | { STB0899_TSSTATUS		, 0x90 }, | 
|  | { STB0899_ERRCTRL1      	, 0xb6 }, | 
|  | { STB0899_ERRCTRL2      	, 0x95 }, | 
|  | { STB0899_ERRCTRL3      	, 0x8d }, | 
|  | { STB0899_DMONMSK1		, 0x27 }, | 
|  | { STB0899_DMONMSK0		, 0x03 }, | 
|  | { STB0899_DEMAPVIT      	, 0x5c }, | 
|  | { STB0899_PLPARM		, 0x19 }, | 
|  | { STB0899_PDELCTRL      	, 0x48 }, | 
|  | { STB0899_PDELCTRL2     	, 0x00 }, | 
|  | { STB0899_BBHCTRL1      	, 0x00 }, | 
|  | { STB0899_BBHCTRL2      	, 0x00 }, | 
|  | { STB0899_HYSTTHRESH    	, 0x77 }, | 
|  | { STB0899_MATCSTM		, 0x00 }, | 
|  | { STB0899_MATCSTL		, 0x00 }, | 
|  | { STB0899_UPLCSTM		, 0x00 }, | 
|  | { STB0899_UPLCSTL		, 0x00 }, | 
|  | { STB0899_DFLCSTM		, 0x00 }, | 
|  | { STB0899_DFLCSTL		, 0x00 }, | 
|  | { STB0899_SYNCCST		, 0x00 }, | 
|  | { STB0899_SYNCDCSTM		, 0x00 }, | 
|  | { STB0899_SYNCDCSTL		, 0x00 }, | 
|  | { STB0899_ISI_ENTRY		, 0x00 }, | 
|  | { STB0899_ISI_BIT_EN		, 0x00 }, | 
|  | { STB0899_MATSTRM		, 0xf0 }, | 
|  | { STB0899_MATSTRL		, 0x02 }, | 
|  | { STB0899_UPLSTRM		, 0x45 }, | 
|  | { STB0899_UPLSTRL		, 0x60 }, | 
|  | { STB0899_DFLSTRM		, 0xe3 }, | 
|  | { STB0899_DFLSTRL		, 0x00 }, | 
|  | { STB0899_SYNCSTR		, 0x47 }, | 
|  | { STB0899_SYNCDSTRM		, 0x05 }, | 
|  | { STB0899_SYNCDSTRL		, 0x18 }, | 
|  | { STB0899_CFGPDELSTATUS1	, 0x19 }, | 
|  | { STB0899_CFGPDELSTATUS2	, 0x2b }, | 
|  | { STB0899_BBFERRORM		, 0x00 }, | 
|  | { STB0899_BBFERRORL		, 0x01 }, | 
|  | { STB0899_UPKTERRORM		, 0x00 }, | 
|  | { STB0899_UPKTERRORL		, 0x00 }, | 
|  | { 0xffff			, 0xff }, | 
|  | }; | 
|  |  | 
|  |  | 
|  |  | 
|  | struct stb0899_config az6027_stb0899_config = { | 
|  | .init_dev		= az6027_stb0899_s1_init_1, | 
|  | .init_s2_demod		= stb0899_s2_init_2, | 
|  | .init_s1_demod		= az6027_stb0899_s1_init_3, | 
|  | .init_s2_fec		= stb0899_s2_init_4, | 
|  | .init_tst		= stb0899_s1_init_5, | 
|  |  | 
|  | .demod_address 		= 0xd0, /* 0x68, 0xd0 >> 1 */ | 
|  |  | 
|  | .xtal_freq		= 27000000, | 
|  | .inversion		= IQ_SWAP_ON, /* 1 */ | 
|  |  | 
|  | .lo_clk			= 76500000, | 
|  | .hi_clk			= 99000000, | 
|  |  | 
|  | .esno_ave		= STB0899_DVBS2_ESNO_AVE, | 
|  | .esno_quant		= STB0899_DVBS2_ESNO_QUANT, | 
|  | .avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE, | 
|  | .avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE, | 
|  | .miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD, | 
|  | .uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ, | 
|  | .uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK, | 
|  | .uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF, | 
|  | .sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT, | 
|  |  | 
|  | .btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS, | 
|  | .btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, | 
|  | .crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS, | 
|  | .ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER, | 
|  |  | 
|  | .tuner_get_frequency	= stb6100_get_frequency, | 
|  | .tuner_set_frequency	= stb6100_set_frequency, | 
|  | .tuner_set_bandwidth	= stb6100_set_bandwidth, | 
|  | .tuner_get_bandwidth	= stb6100_get_bandwidth, | 
|  | .tuner_set_rfsiggain	= NULL, | 
|  | }; | 
|  |  | 
|  | struct stb6100_config az6027_stb6100_config = { | 
|  | .tuner_address	= 0xc0, | 
|  | .refclock	= 27000000, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* check for mutex FIXME */ | 
|  | static int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, | 
|  | u16 value, u16 index, u8 *b, int blen) | 
|  | { | 
|  | int ret = -1; | 
|  | if (mutex_lock_interruptible(&d->usb_mutex)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | ret = usb_control_msg(d->udev, | 
|  | usb_rcvctrlpipe(d->udev, 0), | 
|  | req, | 
|  | USB_TYPE_VENDOR | USB_DIR_IN, | 
|  | value, | 
|  | index, | 
|  | b, | 
|  | blen, | 
|  | 2000); | 
|  |  | 
|  | if (ret < 0) { | 
|  | warn("usb in operation failed. (%d)", ret); | 
|  | ret = -EIO; | 
|  | } else | 
|  | ret = 0; | 
|  |  | 
|  | deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); | 
|  | debug_dump(b, blen, deb_xfer); | 
|  |  | 
|  | mutex_unlock(&d->usb_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_usb_out_op(struct dvb_usb_device *d, | 
|  | u8 req, | 
|  | u16 value, | 
|  | u16 index, | 
|  | u8 *b, | 
|  | int blen) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); | 
|  | debug_dump(b, blen, deb_xfer); | 
|  |  | 
|  | if (mutex_lock_interruptible(&d->usb_mutex)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | ret = usb_control_msg(d->udev, | 
|  | usb_sndctrlpipe(d->udev, 0), | 
|  | req, | 
|  | USB_TYPE_VENDOR | USB_DIR_OUT, | 
|  | value, | 
|  | index, | 
|  | b, | 
|  | blen, | 
|  | 2000); | 
|  |  | 
|  | if (ret != blen) { | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  | mutex_unlock(&d->usb_mutex); | 
|  | return -EIO; | 
|  | } else{ | 
|  | mutex_unlock(&d->usb_mutex); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) | 
|  | { | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | deb_info("%s %d", __func__, onoff); | 
|  |  | 
|  | req = 0xBC; | 
|  | value = onoff; | 
|  | index = 0; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* keys for the enclosed remote control */ | 
|  | static struct rc_map_table rc_map_az6027_table[] = { | 
|  | { 0x01, KEY_1 }, | 
|  | { 0x02, KEY_2 }, | 
|  | }; | 
|  |  | 
|  | /* remote control stuff (does not work with my box) */ | 
|  | static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | int az6027_power_ctrl(struct dvb_usb_device *d, int onoff) | 
|  | { | 
|  | u8 v = onoff; | 
|  | return az6027_usb_out_op(d,0xBC,v,3,NULL,1); | 
|  | } | 
|  | */ | 
|  |  | 
|  | static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, | 
|  | int slot, | 
|  | int address) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  | u8 *b; | 
|  |  | 
|  | if (slot != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | b = kmalloc(12, GFP_KERNEL); | 
|  | if (!b) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&state->ca_mutex); | 
|  |  | 
|  | req = 0xC1; | 
|  | value = address; | 
|  | index = 0; | 
|  | blen = 1; | 
|  |  | 
|  | ret = az6027_usb_in_op(d, req, value, index, b, blen); | 
|  | if (ret < 0) { | 
|  | warn("usb in operation failed. (%d)", ret); | 
|  | ret = -EINVAL; | 
|  | } else { | 
|  | ret = b[0]; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | kfree(b); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, | 
|  | int slot, | 
|  | int address, | 
|  | u8 value) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value1; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | deb_info("%s %d", __func__, slot); | 
|  | if (slot != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&state->ca_mutex); | 
|  | req = 0xC2; | 
|  | value1 = address; | 
|  | index = value; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  |  | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca, | 
|  | int slot, | 
|  | u8 address) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  | u8 *b; | 
|  |  | 
|  | if (slot != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | b = kmalloc(12, GFP_KERNEL); | 
|  | if (!b) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&state->ca_mutex); | 
|  |  | 
|  | req = 0xC3; | 
|  | value = address; | 
|  | index = 0; | 
|  | blen = 2; | 
|  |  | 
|  | ret = az6027_usb_in_op(d, req, value, index, b, blen); | 
|  | if (ret < 0) { | 
|  | warn("usb in operation failed. (%d)", ret); | 
|  | ret = -EINVAL; | 
|  | } else { | 
|  | if (b[0] == 0) | 
|  | warn("Read CI IO error"); | 
|  |  | 
|  | ret = b[1]; | 
|  | deb_info("read cam data = %x from 0x%x", b[1], value); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | kfree(b); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca, | 
|  | int slot, | 
|  | u8 address, | 
|  | u8 value) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value1; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | if (slot != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&state->ca_mutex); | 
|  | req = 0xC4; | 
|  | value1 = address; | 
|  | index = value; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); | 
|  | if (ret != 0) { | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | failed: | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  | u8 *b; | 
|  |  | 
|  | b = kmalloc(12, GFP_KERNEL); | 
|  | if (!b) | 
|  | return -ENOMEM; | 
|  |  | 
|  | req = 0xC8; | 
|  | value = 0; | 
|  | index = 0; | 
|  | blen = 1; | 
|  |  | 
|  | ret = az6027_usb_in_op(d, req, value, index, b, blen); | 
|  | if (ret < 0) { | 
|  | warn("usb in operation failed. (%d)", ret); | 
|  | ret = -EIO; | 
|  | } else{ | 
|  | ret = b[0]; | 
|  | } | 
|  | kfree(b); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret, i; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | mutex_lock(&state->ca_mutex); | 
|  |  | 
|  | req = 0xC6; | 
|  | value = 1; | 
|  | index = 0; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(d, req, value, index, NULL, blen); | 
|  | if (ret != 0) { | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | msleep(500); | 
|  | req = 0xC6; | 
|  | value = 0; | 
|  | index = 0; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(d, req, value, index, NULL, blen); | 
|  | if (ret != 0) { | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 15; i++) { | 
|  | msleep(100); | 
|  |  | 
|  | if (CI_CamReady(ca, slot)) { | 
|  | deb_info("CAM Ready"); | 
|  | break; | 
|  | } | 
|  | } | 
|  | msleep(5000); | 
|  |  | 
|  | failed: | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  |  | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | deb_info("%s", __func__); | 
|  | mutex_lock(&state->ca_mutex); | 
|  | req = 0xC7; | 
|  | value = 1; | 
|  | index = 0; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(d, req, value, index, NULL, blen); | 
|  | if (ret != 0) { | 
|  | warn("usb out operation failed. (%d)", ret); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | failed: | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) | 
|  | { | 
|  | struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  | u8 *b; | 
|  |  | 
|  | b = kmalloc(12, GFP_KERNEL); | 
|  | if (!b) | 
|  | return -ENOMEM; | 
|  | mutex_lock(&state->ca_mutex); | 
|  |  | 
|  | req = 0xC5; | 
|  | value = 0; | 
|  | index = 0; | 
|  | blen = 1; | 
|  |  | 
|  | ret = az6027_usb_in_op(d, req, value, index, b, blen); | 
|  | if (ret < 0) { | 
|  | warn("usb in operation failed. (%d)", ret); | 
|  | ret = -EIO; | 
|  | } else | 
|  | ret = 0; | 
|  |  | 
|  | if (!ret && b[0] == 1) { | 
|  | ret = DVB_CA_EN50221_POLL_CAM_PRESENT | | 
|  | DVB_CA_EN50221_POLL_CAM_READY; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&state->ca_mutex); | 
|  | kfree(b); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void az6027_ci_uninit(struct dvb_usb_device *d) | 
|  | { | 
|  | struct az6027_device_state *state; | 
|  |  | 
|  | deb_info("%s", __func__); | 
|  |  | 
|  | if (NULL == d) | 
|  | return; | 
|  |  | 
|  | state = (struct az6027_device_state *)d->priv; | 
|  | if (NULL == state) | 
|  | return; | 
|  |  | 
|  | if (NULL == state->ca.data) | 
|  | return; | 
|  |  | 
|  | dvb_ca_en50221_release(&state->ca); | 
|  |  | 
|  | memset(&state->ca, 0, sizeof(state->ca)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int az6027_ci_init(struct dvb_usb_adapter *a) | 
|  | { | 
|  | struct dvb_usb_device *d = a->dev; | 
|  | struct az6027_device_state *state = (struct az6027_device_state *)d->priv; | 
|  | int ret; | 
|  |  | 
|  | deb_info("%s", __func__); | 
|  |  | 
|  | mutex_init(&state->ca_mutex); | 
|  |  | 
|  | state->ca.owner			= THIS_MODULE; | 
|  | state->ca.read_attribute_mem	= az6027_ci_read_attribute_mem; | 
|  | state->ca.write_attribute_mem	= az6027_ci_write_attribute_mem; | 
|  | state->ca.read_cam_control	= az6027_ci_read_cam_control; | 
|  | state->ca.write_cam_control	= az6027_ci_write_cam_control; | 
|  | state->ca.slot_reset		= az6027_ci_slot_reset; | 
|  | state->ca.slot_shutdown		= az6027_ci_slot_shutdown; | 
|  | state->ca.slot_ts_enable	= az6027_ci_slot_ts_enable; | 
|  | state->ca.poll_slot_status	= az6027_ci_poll_slot_status; | 
|  | state->ca.data			= d; | 
|  |  | 
|  | ret = dvb_ca_en50221_init(&a->dvb_adap, | 
|  | &state->ca, | 
|  | 0, /* flags */ | 
|  | 1);/* n_slots */ | 
|  | if (ret != 0) { | 
|  | err("Cannot initialize CI: Error %d.", ret); | 
|  | memset(&state->ca, 0, sizeof(state->ca)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | deb_info("CI initialized."); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) | 
|  | { | 
|  | az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6); | 
|  | return 0; | 
|  | } | 
|  | */ | 
|  |  | 
|  | static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) | 
|  | { | 
|  |  | 
|  | u8 buf; | 
|  | struct dvb_usb_adapter *adap = fe->dvb->priv; | 
|  |  | 
|  | struct i2c_msg i2c_msg = { | 
|  | .addr	= 0x99, | 
|  | .flags	= 0, | 
|  | .buf	= &buf, | 
|  | .len	= 1 | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * 2   --18v | 
|  | * 1   --13v | 
|  | * 0   --off | 
|  | */ | 
|  | switch (voltage) { | 
|  | case SEC_VOLTAGE_13: | 
|  | buf = 1; | 
|  | i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); | 
|  | break; | 
|  |  | 
|  | case SEC_VOLTAGE_18: | 
|  | buf = 2; | 
|  | i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); | 
|  | break; | 
|  |  | 
|  | case SEC_VOLTAGE_OFF: | 
|  | buf = 0; | 
|  | i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int az6027_frontend_poweron(struct dvb_usb_adapter *adap) | 
|  | { | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | req = 0xBC; | 
|  | value = 1; /* power on */ | 
|  | index = 3; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | static int az6027_frontend_reset(struct dvb_usb_adapter *adap) | 
|  | { | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | /* reset demodulator */ | 
|  | req = 0xC0; | 
|  | value = 1; /* high */ | 
|  | index = 3; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | return -EIO; | 
|  |  | 
|  | req = 0xC0; | 
|  | value = 0; /* low */ | 
|  | index = 3; | 
|  | blen = 0; | 
|  | msleep_interruptible(200); | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | return -EIO; | 
|  |  | 
|  | msleep_interruptible(200); | 
|  |  | 
|  | req = 0xC0; | 
|  | value = 1; /*high */ | 
|  | index = 3; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | return -EIO; | 
|  |  | 
|  | msleep_interruptible(200); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff) | 
|  | { | 
|  | int ret; | 
|  | u8 req; | 
|  | u16 value; | 
|  | u16 index; | 
|  | int blen; | 
|  |  | 
|  | /* TS passthrough */ | 
|  | req = 0xC7; | 
|  | value = onoff; | 
|  | index = 0; | 
|  | blen = 0; | 
|  |  | 
|  | ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); | 
|  | if (ret != 0) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int az6027_frontend_attach(struct dvb_usb_adapter *adap) | 
|  | { | 
|  |  | 
|  | az6027_frontend_poweron(adap); | 
|  | az6027_frontend_reset(adap); | 
|  |  | 
|  | deb_info("adap = %p, dev = %p\n", adap, adap->dev); | 
|  | adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); | 
|  |  | 
|  | if (adap->fe_adap[0].fe) { | 
|  | deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address); | 
|  | if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { | 
|  | deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address); | 
|  | adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage; | 
|  | az6027_ci_init(adap); | 
|  | } else { | 
|  | adap->fe_adap[0].fe = NULL; | 
|  | } | 
|  | } else | 
|  | warn("no front-end attached\n"); | 
|  |  | 
|  | az6027_frontend_tsbypass(adap, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct dvb_usb_device_properties az6027_properties; | 
|  |  | 
|  | static void az6027_usb_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct dvb_usb_device *d = usb_get_intfdata(intf); | 
|  | az6027_ci_uninit(d); | 
|  | dvb_usb_device_exit(intf); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int az6027_usb_probe(struct usb_interface *intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | return dvb_usb_device_init(intf, | 
|  | &az6027_properties, | 
|  | THIS_MODULE, | 
|  | NULL, | 
|  | adapter_nr); | 
|  | } | 
|  |  | 
|  | /* I2C */ | 
|  | static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) | 
|  | { | 
|  | struct dvb_usb_device *d = i2c_get_adapdata(adap); | 
|  | int i = 0, j = 0, len = 0; | 
|  | u16 index; | 
|  | u16 value; | 
|  | int length; | 
|  | u8 req; | 
|  | u8 *data; | 
|  |  | 
|  | data = kmalloc(256, GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (mutex_lock_interruptible(&d->i2c_mutex) < 0) { | 
|  | kfree(data); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (num > 2) | 
|  | warn("more than 2 i2c messages at a time is not handled yet. TODO."); | 
|  |  | 
|  | for (i = 0; i < num; i++) { | 
|  |  | 
|  | if (msg[i].addr == 0x99) { | 
|  | req = 0xBE; | 
|  | index = 0; | 
|  | value = msg[i].buf[0] & 0x00ff; | 
|  | length = 1; | 
|  | az6027_usb_out_op(d, req, value, index, data, length); | 
|  | } | 
|  |  | 
|  | if (msg[i].addr == 0xd0) { | 
|  | /* write/read request */ | 
|  | if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { | 
|  | req = 0xB9; | 
|  | index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); | 
|  | value = msg[i].addr + (msg[i].len << 8); | 
|  | length = msg[i + 1].len + 6; | 
|  | az6027_usb_in_op(d, req, value, index, data, length); | 
|  | len = msg[i + 1].len; | 
|  | for (j = 0; j < len; j++) | 
|  | msg[i + 1].buf[j] = data[j + 5]; | 
|  |  | 
|  | i++; | 
|  | } else { | 
|  |  | 
|  | /* demod 16bit addr */ | 
|  | req = 0xBD; | 
|  | index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); | 
|  | value = msg[i].addr + (2 << 8); | 
|  | length = msg[i].len - 2; | 
|  | len = msg[i].len - 2; | 
|  | for (j = 0; j < len; j++) | 
|  | data[j] = msg[i].buf[j + 2]; | 
|  | az6027_usb_out_op(d, req, value, index, data, length); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (msg[i].addr == 0xc0) { | 
|  | if (msg[i].flags & I2C_M_RD) { | 
|  |  | 
|  | req = 0xB9; | 
|  | index = 0x0; | 
|  | value = msg[i].addr; | 
|  | length = msg[i].len + 6; | 
|  | az6027_usb_in_op(d, req, value, index, data, length); | 
|  | len = msg[i].len; | 
|  | for (j = 0; j < len; j++) | 
|  | msg[i].buf[j] = data[j + 5]; | 
|  |  | 
|  | } else { | 
|  |  | 
|  | req = 0xBD; | 
|  | index = msg[i].buf[0] & 0x00FF; | 
|  | value = msg[i].addr + (1 << 8); | 
|  | length = msg[i].len - 1; | 
|  | len = msg[i].len - 1; | 
|  |  | 
|  | for (j = 0; j < len; j++) | 
|  | data[j] = msg[i].buf[j + 1]; | 
|  |  | 
|  | az6027_usb_out_op(d, req, value, index, data, length); | 
|  | } | 
|  | } | 
|  | } | 
|  | mutex_unlock(&d->i2c_mutex); | 
|  | kfree(data); | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  |  | 
|  | static u32 az6027_i2c_func(struct i2c_adapter *adapter) | 
|  | { | 
|  | return I2C_FUNC_I2C; | 
|  | } | 
|  |  | 
|  | static struct i2c_algorithm az6027_i2c_algo = { | 
|  | .master_xfer   = az6027_i2c_xfer, | 
|  | .functionality = az6027_i2c_func, | 
|  | }; | 
|  |  | 
|  | static int az6027_identify_state(struct usb_device *udev, | 
|  | struct dvb_usb_device_properties *props, | 
|  | struct dvb_usb_device_description **desc, | 
|  | int *cold) | 
|  | { | 
|  | u8 *b; | 
|  | s16 ret; | 
|  |  | 
|  | b = kmalloc(16, GFP_KERNEL); | 
|  | if (!b) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = usb_control_msg(udev, | 
|  | usb_rcvctrlpipe(udev, 0), | 
|  | 0xb7, | 
|  | USB_TYPE_VENDOR | USB_DIR_IN, | 
|  | 6, | 
|  | 0, | 
|  | b, | 
|  | 6, | 
|  | USB_CTRL_GET_TIMEOUT); | 
|  |  | 
|  | *cold = ret <= 0; | 
|  | kfree(b); | 
|  | deb_info("cold: %d\n", *cold); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct usb_device_id az6027_usb_table[] = { | 
|  | { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) }, | 
|  | { USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V1) }, | 
|  | { USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V2) }, | 
|  | { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) }, | 
|  | { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) }, | 
|  | { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(usb, az6027_usb_table); | 
|  |  | 
|  | static struct dvb_usb_device_properties az6027_properties = { | 
|  | .caps = DVB_USB_IS_AN_I2C_ADAPTER, | 
|  | .usb_ctrl = CYPRESS_FX2, | 
|  | .firmware            = "dvb-usb-az6027-03.fw", | 
|  | .no_reconnect        = 1, | 
|  |  | 
|  | .size_of_priv     = sizeof(struct az6027_device_state), | 
|  | .identify_state		= az6027_identify_state, | 
|  | .num_adapters = 1, | 
|  | .adapter = { | 
|  | { | 
|  | .num_frontends = 1, | 
|  | .fe = {{ | 
|  | .streaming_ctrl   = az6027_streaming_ctrl, | 
|  | .frontend_attach  = az6027_frontend_attach, | 
|  |  | 
|  | /* parameter for the MPEG2-data transfer */ | 
|  | .stream = { | 
|  | .type = USB_BULK, | 
|  | .count = 10, | 
|  | .endpoint = 0x02, | 
|  | .u = { | 
|  | .bulk = { | 
|  | .buffersize = 4096, | 
|  | } | 
|  | } | 
|  | }, | 
|  | }}, | 
|  | } | 
|  | }, | 
|  | /* | 
|  | .power_ctrl       = az6027_power_ctrl, | 
|  | .read_mac_address = az6027_read_mac_addr, | 
|  | */ | 
|  | .rc.legacy = { | 
|  | .rc_map_table     = rc_map_az6027_table, | 
|  | .rc_map_size      = ARRAY_SIZE(rc_map_az6027_table), | 
|  | .rc_interval      = 400, | 
|  | .rc_query         = az6027_rc_query, | 
|  | }, | 
|  |  | 
|  | .i2c_algo         = &az6027_i2c_algo, | 
|  |  | 
|  | .num_device_descs = 6, | 
|  | .devices = { | 
|  | { | 
|  | .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)", | 
|  | .cold_ids = { &az6027_usb_table[0], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, { | 
|  | .name = "TERRATEC S7", | 
|  | .cold_ids = { &az6027_usb_table[1], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, { | 
|  | .name = "TERRATEC S7 MKII", | 
|  | .cold_ids = { &az6027_usb_table[2], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, { | 
|  | .name = "Technisat SkyStar USB 2 HD CI", | 
|  | .cold_ids = { &az6027_usb_table[3], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, { | 
|  | .name = "Technisat SkyStar USB 2 HD CI", | 
|  | .cold_ids = { &az6027_usb_table[4], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, { | 
|  | .name = "Elgato EyeTV Sat", | 
|  | .cold_ids = { &az6027_usb_table[5], NULL }, | 
|  | .warm_ids = { NULL }, | 
|  | }, | 
|  | { NULL }, | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* usb specific object needed to register this driver with the usb subsystem */ | 
|  | static struct usb_driver az6027_usb_driver = { | 
|  | .name		= "dvb_usb_az6027", | 
|  | .probe 		= az6027_usb_probe, | 
|  | .disconnect 	= az6027_usb_disconnect, | 
|  | .id_table 	= az6027_usb_table, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(az6027_usb_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>"); | 
|  | MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)"); | 
|  | MODULE_VERSION("1.0"); | 
|  | MODULE_LICENSE("GPL"); |