[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 120b159..ba3697e 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -1,5 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+/*
+ * .iobase isn't a constant (in the sense of C) so we fill it in at runtime.
+ */
+#define MACE_PORT(int) \
+{ \
+ .irq = int, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_SKIP_TEST, \
+ .regshift = 8, \
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+ MACE_PORT(MACEISA_SERIAL1_IRQ),
+ MACE_PORT(MACEISA_SERIAL2_IRQ),
+ { },
+};
+
+static struct platform_device uart8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = uart8250_data,
+ },
+};
+
+static int __init uart8250_init(void)
+{
+ uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1;
+ uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1;
+
+ return platform_device_register(&uart8250_device);
+}
+
+device_initcall(uart8250_init);
static __init int meth_devinit(void)
{
@@ -18,3 +66,7 @@
}
device_initcall(meth_devinit);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 57708fe..bbba066 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -62,12 +62,6 @@
}
#endif
-#ifdef CONFIG_SERIAL_8250
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#endif /* CONFIG_SERIAL_8250 */
-
/* An arbitrary time; this can be decreased if reliability looks good */
#define WAIT_MS 10
@@ -96,36 +90,6 @@
board_time_init = ip32_time_init;
-#ifdef CONFIG_SERIAL_8250
- {
- static struct uart_port o2_serial[2];
-
- memset(o2_serial, 0, sizeof(o2_serial));
- o2_serial[0].type = PORT_16550A;
- o2_serial[0].line = 0;
- o2_serial[0].irq = MACEISA_SERIAL1_IRQ;
- o2_serial[0].flags = UPF_SKIP_TEST;
- o2_serial[0].uartclk = 1843200;
- o2_serial[0].iotype = UPIO_MEM;
- o2_serial[0].membase = (char *)&mace->isa.serial1;
- o2_serial[0].fifosize = 14;
- /* How much to shift register offset by. Each UART register
- * is replicated over 256 byte space */
- o2_serial[0].regshift = 8;
- o2_serial[1].type = PORT_16550A;
- o2_serial[1].line = 1;
- o2_serial[1].irq = MACEISA_SERIAL2_IRQ;
- o2_serial[1].flags = UPF_SKIP_TEST;
- o2_serial[1].uartclk = 1843200;
- o2_serial[1].iotype = UPIO_MEM;
- o2_serial[1].membase = (char *)&mace->isa.serial2;
- o2_serial[1].fifosize = 14;
- o2_serial[1].regshift = 8;
-
- early_serial_setup(&o2_serial[0]);
- early_serial_setup(&o2_serial[1]);
- }
-#endif
#ifdef CONFIG_SGI_O2MACE_ETH
{
char *mac = ArcGetEnvironmentVariable("eaddr");