OMAP: board-files: remove custom PD GPIO handling for DVI output
Now that the panel-dvi driver handles the PD (power-down) GPIO, we can
remove the custom PD handling from the board files.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a2010f0..92f79de 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -118,19 +118,6 @@
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -155,8 +142,7 @@
};
static struct panel_dvi_platform_data dvi_panel = {
- .platform_enable = devkit8000_panel_enable_dvi,
- .platform_disable = devkit8000_panel_disable_dvi,
+ .power_down_gpio = -1,
};
static struct omap_dss_device devkit8000_dvi_device = {
@@ -244,13 +230,7 @@
}
/* gpio + 7 is "DVI_PD" (out, active low) */
- devkit8000_dvi_device.reset_gpio = gpio + 7;
- ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "DVI PowerDown");
- if (ret < 0) {
- devkit8000_dvi_device.reset_gpio = -EINVAL;
- printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
- }
+ dvi_panel.power_down_gpio = gpio + 7;
return 0;
}