OMAP: board-files: remove custom PD GPIO handling for DVI output
Now that the panel-dvi driver handles the PD (power-down) GPIO, we can
remove the custom PD handling from the board files.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 930c0d3..c702822 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -444,22 +444,9 @@
.setup = igep_twl_gpio_setup,
};
-static int igep2_enable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
-
- return 0;
-}
-
-static void igep2_disable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
-}
-
static struct panel_dvi_platform_data dvi_panel = {
- .platform_enable = igep2_enable_dvi,
- .platform_disable = igep2_disable_dvi,
- .i2c_bus_num = 3,
+ .i2c_bus_num = 3,
+ .power_down_gpio = IGEP2_GPIO_DVI_PUP,
};
static struct omap_dss_device igep2_dvi_device = {
@@ -480,14 +467,6 @@
.default_device = &igep2_dvi_device,
};
-static void __init igep2_display_init(void)
-{
- int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
- "GPIO_DVI_PUP");
- if (err)
- pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
-}
-
static struct platform_device *igep_devices[] __initdata = {
&igep_vwlan_device,
};
@@ -668,7 +647,6 @@
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
- igep2_display_init();
igep2_init_smsc911x();
usbhs_init(&igep2_usbhs_bdata);
} else {