OMAP: board-files: remove custom PD GPIO handling for DVI output
Now that the panel-dvi driver handles the PD (power-down) GPIO, we can
remove the custom PD handling from the board files.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba..ddf8253 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -420,22 +420,10 @@
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
-
/* Using generic display panel */
static struct panel_dvi_platform_data omap4_dvi_panel = {
- .platform_enable = omap4_panda_enable_dvi,
- .platform_disable = omap4_panda_disable_dvi,
- .i2c_bus_num = 3,
+ .i2c_bus_num = 3,
+ .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
struct omap_dss_device omap4_panda_dvi_device = {
@@ -448,18 +436,6 @@
.channel = OMAP_DSS_CHANNEL_LCD2,
};
-int __init omap4_panda_dvi_init(void)
-{
- int r;
-
- /* Requesting TFP410 DVI GPIO and disabling it, at bootup */
- r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "DVI PD");
- if (r)
- pr_err("Failed to get DVI powerdown GPIO\n");
-
- return r;
-}
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
@@ -511,11 +487,6 @@
void __init omap4_panda_display_init(void)
{
- int r;
-
- r = omap4_panda_dvi_init();
- if (r)
- pr_err("error initializing panda DVI\n");
omap_display_init(&omap4_panda_dss_data);