Gitiles
Code Review Sign In
review.evervolv.com / android_kernel_oneplus_msm8996 / e90ab840fb826621c8c01cc9e70ca3f0889fa416 / . / drivers / scsi / mpt2sas / mpt2sas_ctl.c
blob: aabcb911706e11155bb886ec420051b9edb04e36 [file] [log] [blame]
/*
* Management Module Support for MPT (Message Passing Technology) based
* controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
* Copyright (C) 2007-2010 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/compat.h>
#include <linux/poll.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include "mpt2sas_base.h"
#include "mpt2sas_ctl.h"
static DEFINE_MUTEX(_ctl_mutex);
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
u8 *issue_reset);
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
* @BLOCKING: blocking
*
* These states are for ioctls that need to wait for a response
* from firmware, so they probably require sleep.
*/
enum block_state {
NON_BLOCKING,
BLOCKING,
};
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _ctl_sas_device_find_by_handle - sas device search
* @ioc: per adapter object
* @handle: sas device handle (assigned by firmware)
* Context: Calling function should acquire ioc->sas_device_lock
*
* This searches for sas_device based on sas_address, then return sas_device
* object.
*/
static struct _sas_device *
_ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
{
struct _sas_device *sas_device, *r;
r = NULL;
list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
if (sas_device->handle != handle)
continue;
r = sas_device;
goto out;
}
out:
return r;
}
/**
* _ctl_display_some_debug - debug routine
* @ioc: per adapter object
* @smid: system request message index
* @calling_function_name: string pass from calling function
* @mpi_reply: reply message frame
* Context: none.
*
* Function for displaying debug info helpful when debugging issues
* in this module.
*/
static void
_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
{
Mpi2ConfigRequest_t *mpi_request;
char *desc = NULL;
if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
return;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
switch (mpi_request->Function) {
case MPI2_FUNCTION_SCSI_IO_REQUEST:
{
Mpi2SCSIIORequest_t *scsi_request =
(Mpi2SCSIIORequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"scsi_io, cmd(0x%02x), cdb_len(%d)",
scsi_request->CDB.CDB32[0],
le16_to_cpu(scsi_request->IoFlags) & 0xF);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_SCSI_TASK_MGMT:
desc = "task_mgmt";
break;
case MPI2_FUNCTION_IOC_INIT:
desc = "ioc_init";
break;
case MPI2_FUNCTION_IOC_FACTS:
desc = "ioc_facts";
break;
case MPI2_FUNCTION_CONFIG:
{
Mpi2ConfigRequest_t *config_request =
(Mpi2ConfigRequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"config, type(0x%02x), ext_type(0x%02x), number(%d)",
(config_request->Header.PageType &
MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
config_request->Header.PageNumber);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_PORT_FACTS:
desc = "port_facts";
break;
case MPI2_FUNCTION_PORT_ENABLE:
desc = "port_enable";
break;
case MPI2_FUNCTION_EVENT_NOTIFICATION:
desc = "event_notification";
break;
case MPI2_FUNCTION_FW_DOWNLOAD:
desc = "fw_download";
break;
case MPI2_FUNCTION_FW_UPLOAD:
desc = "fw_upload";
break;
case MPI2_FUNCTION_RAID_ACTION:
desc = "raid_action";
break;
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
Mpi2SCSIIORequest_t *scsi_request =
(Mpi2SCSIIORequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"raid_pass, cmd(0x%02x), cdb_len(%d)",
scsi_request->CDB.CDB32[0],
le16_to_cpu(scsi_request->IoFlags) & 0xF);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
desc = "sas_iounit_cntl";
break;
case MPI2_FUNCTION_SATA_PASSTHROUGH:
desc = "sata_pass";
break;
case MPI2_FUNCTION_DIAG_BUFFER_POST:
desc = "diag_buffer_post";
break;
case MPI2_FUNCTION_DIAG_RELEASE:
desc = "diag_release";
break;
case MPI2_FUNCTION_SMP_PASSTHROUGH:
desc = "smp_passthrough";
break;
}
if (!desc)
return;
printk(MPT2SAS_INFO_FMT "%s: %s, smid(%d)\n",
ioc->name, calling_function_name, desc, smid);
if (!mpi_reply)
return;
if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
printk(MPT2SAS_INFO_FMT
"\tiocstatus(0x%04x), loginfo(0x%08x)\n",
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
Mpi2SCSIIOReply_t *scsi_reply =
(Mpi2SCSIIOReply_t *)mpi_reply;
struct _sas_device *sas_device = NULL;
unsigned long flags;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _ctl_sas_device_find_by_handle(ioc,
le16_to_cpu(scsi_reply->DevHandle));
if (sas_device) {
printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
"phy(%d)\n", ioc->name, (unsigned long long)
sas_device->sas_address, sas_device->phy);
printk(MPT2SAS_WARN_FMT
"\tenclosure_logical_id(0x%016llx), slot(%d)\n",
ioc->name, sas_device->enclosure_logical_id,
sas_device->slot);
}
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
printk(MPT2SAS_INFO_FMT
"\tscsi_state(0x%02x), scsi_status"
"(0x%02x)\n", ioc->name,
scsi_reply->SCSIState,
scsi_reply->SCSIStatus);
}
}
#endif
/**
* mpt2sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using ioc->ctl_cb_idx.
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
Mpi2SCSIIOReply_t *scsiio_reply;
const void *sense_data;
u32 sz;
if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
return 1;
if (ioc->ctl_cmds.smid != smid)
return 1;
ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID;
/* get sense data */
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_reply->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
if (scsiio_reply->SCSIState &
MPI2_SCSI_STATE_AUTOSENSE_VALID) {
sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(scsiio_reply->SenseCount));
sense_data = mpt2sas_base_get_sense_buffer(ioc,
smid);
memcpy(ioc->ctl_cmds.sense, sense_data, sz);
}
}
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
#endif
ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
return 1;
}
/**
* _ctl_check_event_type - determines when an event needs logging
* @ioc: per adapter object
* @event: firmware event
*
* The bitmask in ioc->event_type[] indicates which events should be
* be saved in the driver event_log. This bitmask is set by application.
*
* Returns 1 when event should be captured, or zero means no match.
*/
static int
_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event)
{
u16 i;
u32 desired_event;
if (event >= 128 || !event || !ioc->event_log)
return 0;
desired_event = (1 << (event % 32));
if (!desired_event)
desired_event = 1;
i = event / 32;
return desired_event & ioc->event_type[i];
}
/**
* mpt2sas_ctl_add_to_event_log - add event
* @ioc: per adapter object
* @mpi_reply: reply message frame
*
* Return nothing.
*/
void
mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply)
{
struct MPT2_IOCTL_EVENTS *event_log;
u16 event;
int i;
u32 sz, event_data_sz;
u8 send_aen = 0;
if (!ioc->event_log)
return;
event = le16_to_cpu(mpi_reply->Event);
if (_ctl_check_event_type(ioc, event)) {
/* insert entry into circular event_log */
i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE;
event_log = ioc->event_log;
event_log[i].event = event;
event_log[i].context = ioc->event_context++;
event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE);
memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE);
memcpy(event_log[i].data, mpi_reply->EventData, sz);
send_aen = 1;
}
/* This aen_event_read_flag flag is set until the
* application has read the event log.
* For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
*/
if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
(send_aen && !ioc->aen_event_read_flag)) {
ioc->aen_event_read_flag = 1;
wake_up_interruptible(&ctl_poll_wait);
if (async_queue)
kill_fasync(&async_queue, SIGIO, POLL_IN);
}
}
/**
* mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
* @ioc: per adapter object
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: interrupt.
*
* This function merely adds a new work task into ioc->firmware_event_thread.
* The tasks are worked from _firmware_event_work in user context.
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
return 1;
}
/**
* _ctl_verify_adapter - validates ioc_number passed from application
* @ioc: per adapter object
* @iocpp: The ioc pointer is returned in this.
*
* Return (-1) means error, else ioc_number.
*/
static int
_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
{
struct MPT2SAS_ADAPTER *ioc;
list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
if (ioc->id != ioc_number)
continue;
*iocpp = ioc;
return ioc_number;
}
*iocpp = NULL;
return -1;
}
/**
* mpt2sas_ctl_reset_handler - reset callback handler (for ctl)
* @ioc: per adapter object
* @reset_phase: phase
*
* The handler for doing any required cleanup or initialization.
*
* The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
* MPT2_IOC_DONE_RESET
*/
void
mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
int i;
u8 issue_reset;
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!(ioc->diag_buffer_status[i] &
MPT2_DIAG_BUFFER_IS_REGISTERED))
continue;
if ((ioc->diag_buffer_status[i] &
MPT2_DIAG_BUFFER_IS_RELEASED))
continue;
_ctl_send_release(ioc, i, &issue_reset);
}
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
ioc->ctl_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
complete(&ioc->ctl_cmds.done);
}
break;
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!(ioc->diag_buffer_status[i] &
MPT2_DIAG_BUFFER_IS_REGISTERED))
continue;
if ((ioc->diag_buffer_status[i] &
MPT2_DIAG_BUFFER_IS_RELEASED))
continue;
ioc->diag_buffer_status[i] |=
MPT2_DIAG_BUFFER_IS_DIAG_RESET;
}
break;
}
}
/**
* _ctl_fasync -
* @fd -
* @filep -
* @mode -
*
* Called when application request fasyn callback handler.
*/
static int
_ctl_fasync(int fd, struct file *filep, int mode)
{
return fasync_helper(fd, filep, mode, &async_queue);
}
/**
* _ctl_release -
* @inode -
* @filep -
*
* Called when application releases the fasyn callback handler.
*/
static int
_ctl_release(struct inode *inode, struct file *filep)
{
return fasync_helper(-1, filep, 0, &async_queue);
}
/**
* _ctl_poll -
* @file -
* @wait -
*
*/
static unsigned int
_ctl_poll(struct file *filep, poll_table *wait)
{
struct MPT2SAS_ADAPTER *ioc;
poll_wait(filep, &ctl_poll_wait, wait);
list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
if (ioc->aen_event_read_flag)
return POLLIN | POLLRDNORM;
}
return 0;
}
/**
* _ctl_set_task_mid - assign an active smid to tm request
* @ioc: per adapter object
* @karg - (struct mpt2_ioctl_command)
* @tm_request - pointer to mf from user space
*
* Returns 0 when an smid if found, else fail.
* during failure, the reply frame is filled.
*/
static int
_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
Mpi2SCSITaskManagementRequest_t *tm_request)
{
u8 found = 0;
u16 i;
u16 handle;
struct scsi_cmnd *scmd;
struct MPT2SAS_DEVICE *priv_data;
unsigned long flags;
Mpi2SCSITaskManagementReply_t *tm_reply;
u32 sz;
u32 lun;
char *desc = NULL;
if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
desc = "abort_task";
else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
desc = "query_task";
else
return 0;
lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
handle = le16_to_cpu(tm_request->DevHandle);
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
for (i = ioc->scsiio_depth; i && !found; i--) {
scmd = ioc->scsi_lookup[i - 1].scmd;
if (scmd == NULL || scmd->device == NULL ||
scmd->device->hostdata == NULL)
continue;
if (lun != scmd->device->lun)
continue;
priv_data = scmd->device->hostdata;
if (priv_data->sas_target == NULL)
continue;
if (priv_data->sas_target->handle != handle)
continue;
tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
found = 1;
}
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
if (!found) {
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
desc, le16_to_cpu(tm_request->DevHandle), lun));
tm_reply = ioc->ctl_cmds.reply;
tm_reply->DevHandle = tm_request->DevHandle;
tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
tm_reply->TaskType = tm_request->TaskType;
tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
tm_reply->VP_ID = tm_request->VP_ID;
tm_reply->VF_ID = tm_request->VF_ID;
sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
sz))
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
return 1;
}
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
desc, le16_to_cpu(tm_request->DevHandle), lun,
le16_to_cpu(tm_request->TaskMID)));
return 0;
}
/**
* _ctl_do_mpt_command - main handler for MPT2COMMAND opcode
* @ioc: per adapter object
* @karg - (struct mpt2_ioctl_command)
* @mf - pointer to mf in user space
* @state - NON_BLOCKING or BLOCKING
*/
static long
_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
struct mpt2_ioctl_command karg, void __user *mf, enum block_state state)
{
MPI2RequestHeader_t *mpi_request = NULL, *request;
MPI2DefaultReply_t *mpi_reply;
u32 ioc_state;
u16 ioc_status;
u16 smid;
unsigned long timeout, timeleft;
u8 issue_reset;
u32 sz;
void *psge;
void *data_out = NULL;
dma_addr_t data_out_dma;
size_t data_out_sz = 0;
void *data_in = NULL;
dma_addr_t data_in_dma;
size_t data_in_sz = 0;
u32 sgl_flags;
long ret;
u16 wait_state_count;
issue_reset = 0;
if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
return -EAGAIN;
else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
return -ERESTARTSYS;
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
ret = -EAGAIN;
goto out;
}
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == 10) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
ret = -EFAULT;
goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
printk(MPT2SAS_INFO_FMT "%s: waiting for "
"operational state(count=%d)\n", ioc->name,
__func__, wait_state_count);
}
if (wait_state_count)
printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
ioc->name, __func__);
mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
if (!mpi_request) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a memory for "
"mpi_request\n", ioc->name, __func__);
ret = -ENOMEM;
goto out;
}
/* Check for overflow and wraparound */
if (karg.data_sge_offset * 4 > ioc->request_sz ||
karg.data_sge_offset > (UINT_MAX / 4)) {
ret = -EINVAL;
goto out;
}
/* copy in request message frame from user */
if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
__func__);
ret = -EFAULT;
goto out;
}
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
smid = mpt2sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
ret = -EAGAIN;
goto out;
}
} else {
smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
ret = -EAGAIN;
goto out;
}
}
ret = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
request = mpt2sas_base_get_msg_frame(ioc, smid);
memcpy(request, mpi_request, karg.data_sge_offset*4);
ioc->ctl_cmds.smid = smid;
data_out_sz = karg.data_out_size;
data_in_sz = karg.data_in_size;
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
if (!le16_to_cpu(mpi_request->FunctionDependent1) ||
le16_to_cpu(mpi_request->FunctionDependent1) >
ioc->facts.MaxDevHandle) {
ret = -EINVAL;
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
}
/* obtain dma-able memory for data transfer */
if (data_out_sz) /* WRITE */ {
data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
&data_out_dma);
if (!data_out) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENOMEM;
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
if (copy_from_user(data_out, karg.data_out_buf_ptr,
data_out_sz)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -EFAULT;
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
}
if (data_in_sz) /* READ */ {
data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
&data_in_dma);
if (!data_in) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENOMEM;
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
}
/* add scatter gather elements */
psge = (void *)request + (karg.data_sge_offset*4);
if (!data_out_sz && !data_in_sz) {
mpt2sas_base_build_zero_len_sge(ioc, psge);
} else if (data_out_sz && data_in_sz) {
/* WRITE sgel first */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
data_out_sz, data_out_dma);
/* incr sgel */
psge += ioc->sge_size;
/* READ sgel last */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
data_in_sz, data_in_dma);
} else if (data_out_sz) /* WRITE */ {
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
data_out_sz, data_out_dma);
} else if (data_in_sz) /* READ */ {
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
data_in_sz, data_in_dma);
}
/* send command to firmware */
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
#endif
switch (mpi_request->Function) {
case MPI2_FUNCTION_SCSI_IO_REQUEST:
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
Mpi2SCSIIORequest_t *scsiio_request =
(Mpi2SCSIIORequest_t *)request;
scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
scsiio_request->SenseBufferLowAddress =
mpt2sas_base_get_sense_buffer_dma(ioc, smid);
memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
mpt2sas_base_put_smid_scsi_io(ioc, smid,
le16_to_cpu(mpi_request->FunctionDependent1));
else
mpt2sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SCSI_TASK_MGMT:
{
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)request;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
"handle(0x%04x), task_type(0x%02x)\n", ioc->name,
le16_to_cpu(tm_request->DevHandle), tm_request->TaskType));
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
}
mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
tm_request->DevHandle));
mpt2sas_base_put_smid_hi_priority(ioc, smid);
break;
}
case MPI2_FUNCTION_SMP_PASSTHROUGH:
{
Mpi2SmpPassthroughRequest_t *smp_request =
(Mpi2SmpPassthroughRequest_t *)mpi_request;
u8 *data;
/* ioc determines which port to use */
smp_request->PhysicalPort = 0xFF;
if (smp_request->PassthroughFlags &
MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
data = (u8 *)&smp_request->SGL;
else
data = data_out;
if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
mpt2sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
{
Mpi2SasIoUnitControlRequest_t *sasiounit_request =
(Mpi2SasIoUnitControlRequest_t *)mpi_request;
if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
|| sasiounit_request->Operation ==
MPI2_SAS_OP_PHY_LINK_RESET) {
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
mpt2sas_base_put_smid_default(ioc, smid);
break;
}
default:
mpt2sas_base_put_smid_default(ioc, smid);
break;
}
if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT)
timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
else
timeout = karg.timeout;
init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
timeout*HZ);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)mpi_request;
mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
tm_request->DevHandle));
} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
ioc->ioc_link_reset_in_progress) {
ioc->ioc_link_reset_in_progress = 0;
ioc->ignore_loginfos = 0;
}
if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
__func__);
_debug_dump_mf(mpi_request, karg.data_sge_offset);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
Mpi2SCSITaskManagementReply_t *tm_reply =
(Mpi2SCSITaskManagementReply_t *)mpi_reply;
printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
"IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
"TerminationCount(0x%08x)\n", ioc->name,
le16_to_cpu(tm_reply->IOCStatus),
le32_to_cpu(tm_reply->IOCLogInfo),
le32_to_cpu(tm_reply->TerminationCount));
}
#endif
/* copy out xdata to user */
if (data_in_sz) {
if (copy_to_user(karg.data_in_buf_ptr, data_in,
data_in_sz)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
/* copy out reply message frame to user */
if (karg.max_reply_bytes) {
sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
sz)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
/* copy out sense to user */
if (karg.max_sense_bytes && (mpi_request->Function ==
MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
if (copy_to_user(karg.sense_data_ptr,
ioc->ctl_cmds.sense, sz)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
issue_host_reset:
if (issue_reset) {
ret = -ENODATA;
if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
printk(MPT2SAS_INFO_FMT "issue target reset: handle "
"= (0x%04x)\n", ioc->name,
le16_to_cpu(mpi_request->FunctionDependent1));
mpt2sas_halt_firmware(ioc);
mpt2sas_scsih_issue_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1), 0, 0,
0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10,
0, TM_MUTEX_ON);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
} else
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
}
out:
/* free memory associated with sg buffers */
if (data_in)
pci_free_consistent(ioc->pdev, data_in_sz, data_in,
data_in_dma);
if (data_out)
pci_free_consistent(ioc->pdev, data_out_sz, data_out,
data_out_dma);
kfree(mpi_request);
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return ret;
}
/**
* _ctl_getiocinfo - main handler for MPT2IOCINFO opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_getiocinfo(void __user *arg)
{
struct mpt2_ioctl_iocinfo karg;
struct MPT2SAS_ADAPTER *ioc;
u8 revision;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
memset(&karg, 0 , sizeof(karg));
if (ioc->is_warpdrive)
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
else
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
if (ioc->pfacts)
karg.port_number = ioc->pfacts[0].PortNumber;
pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
karg.hw_rev = revision;
karg.pci_id = ioc->pdev->device;
karg.subsystem_device = ioc->pdev->subsystem_device;
karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
strcat(karg.driver_version, "-");
strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_eventquery - main handler for MPT2EVENTQUERY opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_eventquery(void __user *arg)
{
struct mpt2_ioctl_eventquery karg;
struct MPT2SAS_ADAPTER *ioc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
memcpy(karg.event_types, ioc->event_type,
MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
if (copy_to_user(arg, &karg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_eventenable - main handler for MPT2EVENTENABLE opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_eventenable(void __user *arg)
{
struct mpt2_ioctl_eventenable karg;
struct MPT2SAS_ADAPTER *ioc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
if (ioc->event_log)
return 0;
memcpy(ioc->event_type, karg.event_types,
MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
mpt2sas_base_validate_event_type(ioc, ioc->event_type);
/* initialize event_log */
ioc->event_context = 0;
ioc->aen_event_read_flag = 0;
ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE,
sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL);
if (!ioc->event_log) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -ENOMEM;
}
return 0;
}
/**
* _ctl_eventreport - main handler for MPT2EVENTREPORT opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_eventreport(void __user *arg)
{
struct mpt2_ioctl_eventreport karg;
struct MPT2SAS_ADAPTER *ioc;
u32 number_bytes, max_events, max;
struct mpt2_ioctl_eventreport __user *uarg = arg;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
number_bytes = karg.hdr.max_data_size -
sizeof(struct mpt2_ioctl_header);
max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS);
max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events);
/* If fewer than 1 event is requested, there must have
* been some type of error.
*/
if (!max || !ioc->event_log)
return -ENODATA;
number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS);
if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
/* reset flag so SIGIO can restart */
ioc->aen_event_read_flag = 0;
return 0;
}
/**
* _ctl_do_reset - main handler for MPT2HARDRESET opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_do_reset(void __user *arg)
{
struct mpt2_ioctl_diag_reset karg;
struct MPT2SAS_ADAPTER *ioc;
int retval;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
if (ioc->shost_recovery || ioc->pci_error_recovery ||
ioc->is_driver_loading)
return -EAGAIN;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
printk(MPT2SAS_INFO_FMT "host reset: %s\n",
ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
return 0;
}
/**
* _ctl_btdh_search_sas_device - searching for sas device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
*/
static int
_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc,
struct mpt2_ioctl_btdh_mapping *btdh)
{
struct _sas_device *sas_device;
unsigned long flags;
int rc = 0;
if (list_empty(&ioc->sas_device_list))
return rc;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
btdh->handle == sas_device->handle) {
btdh->bus = sas_device->channel;
btdh->id = sas_device->id;
rc = 1;
goto out;
} else if (btdh->bus == sas_device->channel && btdh->id ==
sas_device->id && btdh->handle == 0xFFFF) {
btdh->handle = sas_device->handle;
rc = 1;
goto out;
}
}
out:
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
return rc;
}
/**
* _ctl_btdh_search_raid_device - searching for raid device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
*/
static int
_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc,
struct mpt2_ioctl_btdh_mapping *btdh)
{
struct _raid_device *raid_device;
unsigned long flags;
int rc = 0;
if (list_empty(&ioc->raid_device_list))
return rc;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
btdh->handle == raid_device->handle) {
btdh->bus = raid_device->channel;
btdh->id = raid_device->id;
rc = 1;
goto out;
} else if (btdh->bus == raid_device->channel && btdh->id ==
raid_device->id && btdh->handle == 0xFFFF) {
btdh->handle = raid_device->handle;
rc = 1;
goto out;
}
}
out:
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
return rc;
}
/**
* _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode
* @arg - user space buffer containing ioctl content
*/
static long
_ctl_btdh_mapping(void __user *arg)
{
struct mpt2_ioctl_btdh_mapping karg;
struct MPT2SAS_ADAPTER *ioc;
int rc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
rc = _ctl_btdh_search_sas_device(ioc, &karg);
if (!rc)
_ctl_btdh_search_raid_device(ioc, &karg);
if (copy_to_user(arg, &karg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_diag_capability - return diag buffer capability
* @ioc: per adapter object
* @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
*
* returns 1 when diag buffer support is enabled in firmware
*/
static u8
_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type)
{
u8 rc = 0;
switch (buffer_type) {
case MPI2_DIAG_BUF_TYPE_TRACE:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
rc = 1;
break;
case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
rc = 1;
break;
case MPI2_DIAG_BUF_TYPE_EXTENDED:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
rc = 1;
}
return rc;
}
/**
* _ctl_diag_register_2 - wrapper for registering diag buffer support
* @ioc: per adapter object
* @diag_register: the diag_register struct passed in from user space
*
*/
static long
_ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc,
struct mpt2_diag_register *diag_register)
{
int rc, i;
void *request_data = NULL;
dma_addr_t request_data_dma;
u32 request_data_sz = 0;
Mpi2DiagBufferPostRequest_t *mpi_request;
Mpi2DiagBufferPostReply_t *mpi_reply;
u8 buffer_type;
unsigned long timeleft;
u16 smid;
u16 ioc_status;
u8 issue_reset = 0;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
buffer_type = diag_register->buffer_type;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -EPERM;
}
if (ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_REGISTERED) {
printk(MPT2SAS_ERR_FMT "%s: already has a registered "
"buffer for buffer_type(0x%02x)\n", ioc->name, __func__,
buffer_type);
return -EINVAL;
}
if (diag_register->requested_buffer_size % 4) {
printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
"is not 4 byte aligned\n", ioc->name, __func__);
return -EINVAL;
}
smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
request_data = ioc->diag_buffer[buffer_type];
request_data_sz = diag_register->requested_buffer_size;
ioc->unique_id[buffer_type] = diag_register->unique_id;
ioc->diag_buffer_status[buffer_type] = 0;
memcpy(ioc->product_specific[buffer_type],
diag_register->product_specific, MPT2_PRODUCT_SPECIFIC_DWORDS);
ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
if (request_data) {
request_data_dma = ioc->diag_buffer_dma[buffer_type];
if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
pci_free_consistent(ioc->pdev,
ioc->diag_buffer_sz[buffer_type],
request_data, request_data_dma);
request_data = NULL;
}
}
if (request_data == NULL) {
ioc->diag_buffer_sz[buffer_type] = 0;
ioc->diag_buffer_dma[buffer_type] = 0;
request_data = pci_alloc_consistent(
ioc->pdev, request_data_sz, &request_data_dma);
if (request_data == NULL) {
printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"
" for diag buffers, requested size(%d)\n",
ioc->name, __func__, request_data_sz);
mpt2sas_base_free_smid(ioc, smid);
return -ENOMEM;
}
ioc->diag_buffer[buffer_type] = request_data;
ioc->diag_buffer_sz[buffer_type] = request_data_sz;
ioc->diag_buffer_dma[buffer_type] = request_data_dma;
}
mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
mpi_request->BufferType = diag_register->buffer_type;
mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
mpi_request->BufferLength = cpu_to_le32(request_data_sz);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(0x%p), "
"dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
(unsigned long long)request_data_dma,
le32_to_cpu(mpi_request->BufferLength)));
for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
__func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagBufferPostRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_REGISTERED;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
issue_host_reset:
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
out:
if (rc && request_data)
pci_free_consistent(ioc->pdev, request_data_sz,
request_data, request_data_dma);
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
return rc;
}
/**
* mpt2sas_enable_diag_buffer - enabling diag_buffers support driver load time
* @ioc: per adapter object
* @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
*
* This is called when command line option diag_buffer_enable is enabled
* at driver load time.
*/
void
mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, u8 bits_to_register)
{
struct mpt2_diag_register diag_register;
memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
if (bits_to_register & 1) {
printk(MPT2SAS_INFO_FMT "registering trace buffer support\n",
ioc->name);
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
/* register for 1MB buffers */
diag_register.requested_buffer_size = (1024 * 1024);
diag_register.unique_id = 0x7075900;
_ctl_diag_register_2(ioc, &diag_register);
}
if (bits_to_register & 2) {
printk(MPT2SAS_INFO_FMT "registering snapshot buffer support\n",
ioc->name);
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
/* register for 2MB buffers */
diag_register.requested_buffer_size = 2 * (1024 * 1024);
diag_register.unique_id = 0x7075901;
_ctl_diag_register_2(ioc, &diag_register);
}
if (bits_to_register & 4) {
printk(MPT2SAS_INFO_FMT "registering extended buffer support\n",
ioc->name);
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
/* register for 2MB buffers */
diag_register.requested_buffer_size = 2 * (1024 * 1024);
diag_register.unique_id = 0x7075901;
_ctl_diag_register_2(ioc, &diag_register);
}
}
/**
* _ctl_diag_register - application register with driver
* @arg - user space buffer containing ioctl content
* @state - NON_BLOCKING or BLOCKING
*
* This will allow the driver to setup any required buffers that will be
* needed by firmware to communicate with the driver.
*/
static long
_ctl_diag_register(void __user *arg, enum block_state state)
{
struct mpt2_diag_register karg;
struct MPT2SAS_ADAPTER *ioc;
long rc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
return -EAGAIN;
else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
return -ERESTARTSYS;
rc = _ctl_diag_register_2(ioc, &karg);
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
/**
* _ctl_diag_unregister - application unregister with driver
* @arg - user space buffer containing ioctl content
*
* This will allow the driver to cleanup any memory allocated for diag
* messages and to free up any resources.
*/
static long
_ctl_diag_unregister(void __user *arg)
{
struct mpt2_diag_unregister karg;
struct MPT2SAS_ADAPTER *ioc;
void *request_data;
dma_addr_t request_data_dma;
u32 request_data_sz;
u8 buffer_type;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
"registered\n", ioc->name, __func__, buffer_type);
return -EINVAL;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been "
"released\n", ioc->name, __func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
"registered\n", ioc->name, __func__, karg.unique_id);
return -EINVAL;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -ENOMEM;
}
request_data_sz = ioc->diag_buffer_sz[buffer_type];
request_data_dma = ioc->diag_buffer_dma[buffer_type];
pci_free_consistent(ioc->pdev, request_data_sz,
request_data, request_data_dma);
ioc->diag_buffer[buffer_type] = NULL;
ioc->diag_buffer_status[buffer_type] = 0;
return 0;
}
/**
* _ctl_diag_query - query relevant info associated with diag buffers
* @arg - user space buffer containing ioctl content
*
* The application will send only buffer_type and unique_id. Driver will
* inspect unique_id first, if valid, fill in all the info. If unique_id is
* 0x00, the driver will return info specified by Buffer Type.
*/
static long
_ctl_diag_query(void __user *arg)
{
struct mpt2_diag_query karg;
struct MPT2SAS_ADAPTER *ioc;
void *request_data;
int i;
u8 buffer_type;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
karg.application_flags = 0;
buffer_type = karg.buffer_type;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
"registered\n", ioc->name, __func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id & 0xffffff00) {
if (karg.unique_id != ioc->unique_id[buffer_type]) {
printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
"registered\n", ioc->name, __func__,
karg.unique_id);
return -EINVAL;
}
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -ENOMEM;
}
if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED)
karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
MPT2_APP_FLAGS_BUFFER_VALID);
else
karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
MPT2_APP_FLAGS_BUFFER_VALID |
MPT2_APP_FLAGS_FW_BUFFER_ACCESS);
for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
karg.product_specific[i] =
ioc->product_specific[buffer_type][i];
karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
karg.driver_added_buffer_size = 0;
karg.unique_id = ioc->unique_id[buffer_type];
karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) {
printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query "
"data @ %p\n", ioc->name, __func__, arg);
return -EFAULT;
}
return 0;
}
/**
* _ctl_send_release - Diag Release Message
* @ioc: per adapter object
* @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
* @issue_reset - specifies whether host reset is required.
*
*/
static int
_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
{
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
u16 smid;
u16 ioc_status;
u32 ioc_state;
int rc;
unsigned long timeleft;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
rc = 0;
*issue_reset = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"skipping due to FAULT state\n", ioc->name,
__func__));
rc = -EAGAIN;
goto out;
}
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
mpi_request->BufferType = buffer_type;
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
__func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
*issue_reset = 1;
rc = -EFAULT;
goto out;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_RELEASED;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
out:
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
return rc;
}
/**
* _ctl_diag_release - request to send Diag Release Message to firmware
* @arg - user space buffer containing ioctl content
* @state - NON_BLOCKING or BLOCKING
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
* overwritting information in the buffer.
*/
static long
_ctl_diag_release(void __user *arg, enum block_state state)
{
struct mpt2_diag_release karg;
struct MPT2SAS_ADAPTER *ioc;
void *request_data;
int rc;
u8 buffer_type;
u8 issue_reset = 0;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
"registered\n", ioc->name, __func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
"registered\n", ioc->name, __func__, karg.unique_id);
return -EINVAL;
}
if (ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_RELEASED) {
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
"is already released\n", ioc->name, __func__,
buffer_type);
return 0;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -ENOMEM;
}
/* buffers were released by due to host reset */
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_RELEASED;
ioc->diag_buffer_status[buffer_type] &=
~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
"was released due to host reset\n", ioc->name, __func__,
buffer_type);
return 0;
}
if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
return -EAGAIN;
else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
return -ERESTARTSYS;
rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
/**
* _ctl_diag_read_buffer - request for copy of the diag buffer
* @arg - user space buffer containing ioctl content
* @state - NON_BLOCKING or BLOCKING
*/
static long
_ctl_diag_read_buffer(void __user *arg, enum block_state state)
{
struct mpt2_diag_read_buffer karg;
struct mpt2_diag_read_buffer __user *uarg = arg;
struct MPT2SAS_ADAPTER *ioc;
void *request_data, *diag_data;
Mpi2DiagBufferPostRequest_t *mpi_request;
Mpi2DiagBufferPostReply_t *mpi_reply;
int rc, i;
u8 buffer_type;
unsigned long timeleft, request_size, copy_size;
u16 smid;
u16 ioc_status;
u8 issue_reset = 0;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -EPERM;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
"registered\n", ioc->name, __func__, karg.unique_id);
return -EINVAL;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
return -ENOMEM;
}
request_size = ioc->diag_buffer_sz[buffer_type];
if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
"or bytes_to_read are not 4 byte aligned\n", ioc->name,
__func__);
return -EINVAL;
}
if (karg.starting_offset > request_size)
return -EINVAL;
diag_data = (void *)(request_data + karg.starting_offset);
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), "
"offset(%d), sz(%d)\n", ioc->name, __func__,
diag_data, karg.starting_offset, karg.bytes_to_read));
/* Truncate data on requests that are too large */
if ((diag_data + karg.bytes_to_read < diag_data) ||
(diag_data + karg.bytes_to_read > request_data + request_size))
copy_size = request_size - karg.starting_offset;
else
copy_size = karg.bytes_to_read;
if (copy_to_user((void __user *)uarg->diagnostic_data,
diag_data, copy_size)) {
printk(MPT2SAS_ERR_FMT "%s: Unable to write "
"mpt_diag_read_buffer_t data @ %p\n", ioc->name,
__func__, diag_data);
return -EFAULT;
}
if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
return 0;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: Reregister "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"buffer_type(0x%02x) is still registered\n", ioc->name,
__func__, buffer_type));
return 0;
}
/* Get a free request frame and save the message context.
*/
if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
return -EAGAIN;
else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
return -ERESTARTSYS;
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
mpi_request->BufferType = buffer_type;
mpi_request->BufferLength =
cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
mpi_request->BufferAddress =
cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
__func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagBufferPostRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_REGISTERED;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
issue_host_reset:
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
out:
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
/**
* _ctl_ioctl_main - main ioctl entry point
* @file - (struct file)
* @cmd - ioctl opcode
* @arg -
*/
static long
_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg)
{
enum block_state state;
long ret = -EINVAL;
state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING :
BLOCKING;
switch (cmd) {
case MPT2IOCINFO:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo))
ret = _ctl_getiocinfo(arg);
break;
case MPT2COMMAND:
{
struct mpt2_ioctl_command karg;
struct mpt2_ioctl_command __user *uarg;
struct MPT2SAS_ADAPTER *ioc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
!ioc)
return -ENODEV;
if (ioc->shost_recovery || ioc->pci_error_recovery ||
ioc->is_driver_loading)
return -EAGAIN;
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
uarg = arg;
ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
}
break;
}
case MPT2EVENTQUERY:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery))
ret = _ctl_eventquery(arg);
break;
case MPT2EVENTENABLE:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable))
ret = _ctl_eventenable(arg);
break;
case MPT2EVENTREPORT:
ret = _ctl_eventreport(arg);
break;
case MPT2HARDRESET:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset))
ret = _ctl_do_reset(arg);
break;
case MPT2BTDHMAPPING:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping))
ret = _ctl_btdh_mapping(arg);
break;
case MPT2DIAGREGISTER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register))
ret = _ctl_diag_register(arg, state);
break;
case MPT2DIAGUNREGISTER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister))
ret = _ctl_diag_unregister(arg);
break;
case MPT2DIAGQUERY:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query))
ret = _ctl_diag_query(arg);
break;
case MPT2DIAGRELEASE:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release))
ret = _ctl_diag_release(arg, state);
break;
case MPT2DIAGREADBUFFER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer))
ret = _ctl_diag_read_buffer(arg, state);
break;
default:
{
struct mpt2_ioctl_command karg;
struct MPT2SAS_ADAPTER *ioc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
!ioc)
return -ENODEV;
dctlprintk(ioc, printk(MPT2SAS_INFO_FMT
"unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
break;
}
}
return ret;
}
/**
* _ctl_ioctl - main ioctl entry point (unlocked)
* @file - (struct file)
* @cmd - ioctl opcode
* @arg -
*/
static long
_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
mutex_lock(&_ctl_mutex);
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
mutex_unlock(&_ctl_mutex);
return ret;
}
#ifdef CONFIG_COMPAT
/**
* _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
* @file - (struct file)
* @cmd - ioctl opcode
* @arg - (struct mpt2_ioctl_command32)
*
* MPT2COMMAND32 - Handle 32bit applications running on 64bit os.
*/
static long
_ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
{
struct mpt2_ioctl_command32 karg32;
struct mpt2_ioctl_command32 __user *uarg;
struct mpt2_ioctl_command karg;
struct MPT2SAS_ADAPTER *ioc;
enum block_state state;
if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32))
return -EINVAL;
uarg = (struct mpt2_ioctl_command32 __user *) arg;
if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
printk(KERN_ERR "failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
if (ioc->shost_recovery || ioc->pci_error_recovery ||
ioc->is_driver_loading)
return -EAGAIN;
memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
karg.hdr.ioc_number = karg32.hdr.ioc_number;
karg.hdr.port_number = karg32.hdr.port_number;
karg.hdr.max_data_size = karg32.hdr.max_data_size;
karg.timeout = karg32.timeout;
karg.max_reply_bytes = karg32.max_reply_bytes;
karg.data_in_size = karg32.data_in_size;
karg.data_out_size = karg32.data_out_size;
karg.max_sense_bytes = karg32.max_sense_bytes;
karg.data_sge_offset = karg32.data_sge_offset;
karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
}
/**
* _ctl_ioctl_compat - main ioctl entry point (compat)
* @file -
* @cmd -
* @arg -
*
* This routine handles 32 bit applications in 64bit os.
*/
static long
_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
mutex_lock(&_ctl_mutex);
if (cmd == MPT2COMMAND32)
ret = _ctl_compat_mpt_command(file, cmd, arg);
else
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
mutex_unlock(&_ctl_mutex);
return ret;
}
#endif
/* scsi host attributes */
/**
* _ctl_version_fw_show - firmware version
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
(ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
ioc->facts.FWVersion.Word & 0x000000FF);
}
static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
/**
* _ctl_version_bios_show - bios version
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
(version & 0xFF000000) >> 24,
(version & 0x00FF0000) >> 16,
(version & 0x0000FF00) >> 8,
version & 0x000000FF);
}
static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
/**
* _ctl_version_mpi_show - MPI (message passing interface) version
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
}
static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
/**
* _ctl_version_product_show - product name
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
}
static DEVICE_ATTR(version_product, S_IRUGO,
_ctl_version_product_show, NULL);
/**
* _ctl_version_nvdata_persistent_show - ndvata persistent version
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_nvdata_persistent_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n",
le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
}
static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
_ctl_version_nvdata_persistent_show, NULL);
/**
* _ctl_version_nvdata_default_show - nvdata default version
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_version_nvdata_default_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n",
le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
}
static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
_ctl_version_nvdata_default_show, NULL);
/**
* _ctl_board_name_show - board name
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
}
static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
/**
* _ctl_board_assembly_show - board assembly name
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
}
static DEVICE_ATTR(board_assembly, S_IRUGO,
_ctl_board_assembly_show, NULL);
/**
* _ctl_board_tracer_show - board tracer number
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
}
static DEVICE_ATTR(board_tracer, S_IRUGO,
_ctl_board_tracer_show, NULL);
/**
* _ctl_io_delay_show - io missing delay
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is for firmware implemention for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
}
static DEVICE_ATTR(io_delay, S_IRUGO,
_ctl_io_delay_show, NULL);
/**
* _ctl_device_delay_show - device missing delay
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is for firmware implemention for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
}
static DEVICE_ATTR(device_delay, S_IRUGO,
_ctl_device_delay_show, NULL);
/**
* _ctl_fw_queue_depth_show - global credits
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is firmware queue depth limit
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
}
static DEVICE_ATTR(fw_queue_depth, S_IRUGO,
_ctl_fw_queue_depth_show, NULL);
/**
* _ctl_sas_address_show - sas address
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is the controller sas address
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
(unsigned long long)ioc->sas_hba.sas_address);
}
static DEVICE_ATTR(host_sas_address, S_IRUGO,
_ctl_host_sas_address_show, NULL);
/**
* _ctl_logging_level_show - logging level
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
}
static ssize_t
_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%x", &val) != 1)
return -EINVAL;
ioc->logging_level = val;
printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name,
ioc->logging_level);
return strlen(buf);
}
static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
_ctl_logging_level_show, _ctl_logging_level_store);
/* device attributes */
/*
* _ctl_fwfault_debug_show - show/store fwfault_debug
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* mpt2sas_fwfault_debug is command line option
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
_ctl_fwfault_debug_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
}
static ssize_t
_ctl_fwfault_debug_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
ioc->fwfault_debug = val;
printk(MPT2SAS_INFO_FMT "fwfault_debug=%d\n", ioc->name,
ioc->fwfault_debug);
return strlen(buf);
}
static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR,
_ctl_fwfault_debug_show, _ctl_fwfault_debug_store);
/**
* _ctl_ioc_reset_count_show - ioc reset count
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is firmware queue depth limit
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08d\n", ioc->ioc_reset_count);
}
static DEVICE_ATTR(ioc_reset_count, S_IRUGO,
_ctl_ioc_reset_count_show, NULL);
/**
* _ctl_ioc_reply_queue_count_show - number of reply queues
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is number of reply queues
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_ioc_reply_queue_count_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
u8 reply_queue_count;
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
if ((ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
reply_queue_count = ioc->reply_queue_count;
else
reply_queue_count = 1;
return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
}
static DEVICE_ATTR(reply_queue_count, S_IRUGO,
_ctl_ioc_reply_queue_count_show, NULL);
struct DIAG_BUFFER_START {
__le32 Size;
__le32 DiagVersion;
u8 BufferType;
u8 Reserved[3];
__le32 Reserved1;
__le32 Reserved2;
__le32 Reserved3;
};
/**
* _ctl_host_trace_buffer_size_show - host buffer size (trace only)
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_host_trace_buffer_size_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
u32 size = 0;
struct DIAG_BUFFER_START *request_data;
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
"registered\n", ioc->name, __func__);
return 0;
}
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
"registered\n", ioc->name, __func__);
return 0;
}
request_data = (struct DIAG_BUFFER_START *)
ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
le32_to_cpu(request_data->DiagVersion) == 0x01000000) &&
le32_to_cpu(request_data->Reserved3) == 0x4742444c)
size = le32_to_cpu(request_data->Size);
ioc->ring_buffer_sz = size;
return snprintf(buf, PAGE_SIZE, "%d\n", size);
}
static DEVICE_ATTR(host_trace_buffer_size, S_IRUGO,
_ctl_host_trace_buffer_size_show, NULL);
/**
* _ctl_host_trace_buffer_show - firmware ring buffer (trace only)
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read/write' shost attribute.
*
* You will only be able to read 4k bytes of ring buffer at a time.
* In order to read beyond 4k bytes, you will have to write out the
* offset to the same attribute, it will move the pointer.
*/
static ssize_t
_ctl_host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
void *request_data;
u32 size;
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
"registered\n", ioc->name, __func__);
return 0;
}
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
printk(MPT2SAS_ERR_FMT "%s: host_trace_buffer is not "
"registered\n", ioc->name, __func__);
return 0;
}
if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
return 0;
size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
size = (size > PAGE_SIZE) ? PAGE_SIZE : size;
request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
memcpy(buf, request_data, size);
return size;
}
static ssize_t
_ctl_host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
ioc->ring_buffer_offset = val;
return strlen(buf);
}
static DEVICE_ATTR(host_trace_buffer, S_IRUGO | S_IWUSR,
_ctl_host_trace_buffer_show, _ctl_host_trace_buffer_store);
/*****************************************/
/**
* _ctl_host_trace_buffer_enable_show - firmware ring buffer (trace only)
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read/write' shost attribute.
*
* This is a mechnism to post/release host_trace_buffers
*/
static ssize_t
_ctl_host_trace_buffer_enable_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0))
return snprintf(buf, PAGE_SIZE, "off\n");
else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_RELEASED))
return snprintf(buf, PAGE_SIZE, "release\n");
else
return snprintf(buf, PAGE_SIZE, "post\n");
}
static ssize_t
_ctl_host_trace_buffer_enable_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
char str[10] = "";
struct mpt2_diag_register diag_register;
u8 issue_reset = 0;
if (sscanf(buf, "%s", str) != 1)
return -EINVAL;
if (!strcmp(str, "post")) {
/* exit out if host buffers are already posted */
if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_REGISTERED) &&
((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_RELEASED) == 0))
goto out;
memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
printk(MPT2SAS_INFO_FMT "posting host trace buffers\n",
ioc->name);
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
diag_register.requested_buffer_size = (1024 * 1024);
diag_register.unique_id = 0x7075900;
ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
_ctl_diag_register_2(ioc, &diag_register);
} else if (!strcmp(str, "release")) {
/* exit out if host buffers are already released */
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
goto out;
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_REGISTERED) == 0)
goto out;
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT2_DIAG_BUFFER_IS_RELEASED))
goto out;
printk(MPT2SAS_INFO_FMT "releasing host trace buffer\n",
ioc->name);
_ctl_send_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, &issue_reset);
}
out:
return strlen(buf);
}
static DEVICE_ATTR(host_trace_buffer_enable, S_IRUGO | S_IWUSR,
_ctl_host_trace_buffer_enable_show, _ctl_host_trace_buffer_enable_store);
struct device_attribute *mpt2sas_host_attrs[] = {
&dev_attr_version_fw,
&dev_attr_version_bios,
&dev_attr_version_mpi,
&dev_attr_version_product,
&dev_attr_version_nvdata_persistent,
&dev_attr_version_nvdata_default,
&dev_attr_board_name,
&dev_attr_board_assembly,
&dev_attr_board_tracer,
&dev_attr_io_delay,
&dev_attr_device_delay,
&dev_attr_logging_level,
&dev_attr_fwfault_debug,
&dev_attr_fw_queue_depth,
&dev_attr_host_sas_address,
&dev_attr_ioc_reset_count,
&dev_attr_host_trace_buffer_size,
&dev_attr_host_trace_buffer,
&dev_attr_host_trace_buffer_enable,
&dev_attr_reply_queue_count,
NULL,
};
/**
* _ctl_device_sas_address_show - sas address
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is the sas address for the target
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
(unsigned long long)sas_device_priv_data->sas_target->sas_address);
}
static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
/**
* _ctl_device_handle_show - device handle
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* This is the firmware assigned device handle
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
_ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
return snprintf(buf, PAGE_SIZE, "0x%04x\n",
sas_device_priv_data->sas_target->handle);
}
static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
struct device_attribute *mpt2sas_dev_attrs[] = {
&dev_attr_sas_address,
&dev_attr_sas_device_handle,
NULL,
};
static const struct file_operations ctl_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = _ctl_ioctl,
.release = _ctl_release,
.poll = _ctl_poll,
.fasync = _ctl_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = _ctl_ioctl_compat,
#endif
.llseek = noop_llseek,
};
static struct miscdevice ctl_dev = {
.minor = MPT2SAS_MINOR,
.name = MPT2SAS_DEV_NAME,
.fops = &ctl_fops,
};
/**
* mpt2sas_ctl_init - main entry point for ctl.
*
*/
void
mpt2sas_ctl_init(void)
{
async_queue = NULL;
if (misc_register(&ctl_dev) < 0)
printk(KERN_ERR "%s can't register misc device [minor=%d]\n",
MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
init_waitqueue_head(&ctl_poll_wait);
}
/**
* mpt2sas_ctl_exit - exit point for ctl
*
*/
void
mpt2sas_ctl_exit(void)
{
struct MPT2SAS_ADAPTER *ioc;
int i;
list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
/* free memory associated to diag buffers */
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!ioc->diag_buffer[i])
continue;
pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
ioc->diag_buffer[i] = NULL;
ioc->diag_buffer_status[i] = 0;
}
kfree(ioc->event_log);
}
misc_deregister(&ctl_dev);
}