ixgbe: add support for active DA cables
This patch adds support of active DA cables. This is
renaming and adding some PHY type enumerations.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index d6d5b84..22d21af 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -531,6 +531,7 @@
u8 comp_codes_10g = 0;
u8 oui_bytes[3] = {0, 0, 0};
u8 cable_tech = 0;
+ u8 cable_spec = 0;
u16 enforce_sfp = 0;
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
@@ -580,14 +581,30 @@
else
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
} else if (hw->mac.type == ixgbe_mac_82599EB) {
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_da_cu_core0;
else
hw->phy.sfp_type =
ixgbe_sfp_type_da_cu_core1;
- else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+ hw->phy.ops.read_i2c_eeprom(
+ hw, IXGBE_SFF_CABLE_SPEC_COMP,
+ &cable_spec);
+ if (cable_spec &
+ IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_unknown;
+ }
+ } else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_srlr_core0;
@@ -637,10 +654,14 @@
switch (vendor_oui) {
case IXGBE_SFF_VENDOR_OUI_TYCO:
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
- hw->phy.type = ixgbe_phy_tw_tyco;
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_tyco;
break;
case IXGBE_SFF_VENDOR_OUI_FTL:
- hw->phy.type = ixgbe_phy_sfp_ftl;
+ if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type = ixgbe_phy_sfp_ftl_active;
+ else
+ hw->phy.type = ixgbe_phy_sfp_ftl;
break;
case IXGBE_SFF_VENDOR_OUI_AVAGO:
hw->phy.type = ixgbe_phy_sfp_avago;
@@ -650,7 +671,11 @@
break;
default:
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
- hw->phy.type = ixgbe_phy_tw_unknown;
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_unknown;
+ else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_active_unknown;
else
hw->phy.type = ixgbe_phy_sfp_unknown;
break;
@@ -658,7 +683,8 @@
}
/* All passive DA cables are supported */
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+ if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+ IXGBE_SFF_DA_ACTIVE_CABLE)) {
status = 0;
goto out;
}