m68knommu: add basic mmu-less m548x support
Add a very basic mmu-less support for coldfire m548x family. This is perhaps
also valid for m547x family. The port comprises the serial, tick timer and
reboot support. The gpio part compiles but is empty. This gives a functional
albeit limited linux for the m548x coldfire family. This has been tested
on a Freescale M548xEVB Lite board with a M5484 processor and the default
dbug monitor.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 89f1956..7085bd5 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -29,7 +29,7 @@
static inline void __flush_cache_all(void)
{
-#ifdef CONFIG_M5407
+#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
/*
* Use cpushl to push and invalidate all cache lines.
* Gas doesn't seem to know how to generate the ColdFire
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 83a9fa4..3b0a34d 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -32,7 +32,9 @@
*/
#define MCF_MBAR 0x10000000
#define MCF_MBAR2 0x80000000
-#if defined(CONFIG_M520x)
+#if defined(CONFIG_M548x)
+#define MCF_IPSBAR MCF_MBAR
+#elif defined(CONFIG_M520x)
#define MCF_IPSBAR 0xFC000000
#else
#define MCF_IPSBAR 0x40000000
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 283214d..1b57adb 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -36,7 +36,8 @@
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M548x)
/* These parts have GPIO organized by 8 bit ports */
@@ -136,6 +137,8 @@
#endif
else
return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
#endif
}
@@ -173,6 +176,8 @@
#endif
else
return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
#endif
}
diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m548xgpt.h
new file mode 100644
index 0000000..c8ef158
--- /dev/null
+++ b/arch/m68k/include/asm/m548xgpt.h
@@ -0,0 +1,88 @@
+/*
+ * File: m548xgpt.h
+ * Purpose: Register and bit definitions for the MCF548X
+ *
+ * Notes:
+ *
+ */
+
+#ifndef m548xgpt_h
+#define m548xgpt_h
+
+/*********************************************************************
+*
+* General Purpose Timers (GPT)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPT_GMS0 0x000800
+#define MCF_GPT_GCIR0 0x000804
+#define MCF_GPT_GPWM0 0x000808
+#define MCF_GPT_GSR0 0x00080C
+#define MCF_GPT_GMS1 0x000810
+#define MCF_GPT_GCIR1 0x000814
+#define MCF_GPT_GPWM1 0x000818
+#define MCF_GPT_GSR1 0x00081C
+#define MCF_GPT_GMS2 0x000820
+#define MCF_GPT_GCIR2 0x000824
+#define MCF_GPT_GPWM2 0x000828
+#define MCF_GPT_GSR2 0x00082C
+#define MCF_GPT_GMS3 0x000830
+#define MCF_GPT_GCIR3 0x000834
+#define MCF_GPT_GPWM3 0x000838
+#define MCF_GPT_GSR3 0x00083C
+#define MCF_GPT_GMS(x) (0x000800+((x)*0x010))
+#define MCF_GPT_GCIR(x) (0x000804+((x)*0x010))
+#define MCF_GPT_GPWM(x) (0x000808+((x)*0x010))
+#define MCF_GPT_GSR(x) (0x00080C+((x)*0x010))
+
+/* Bit definitions and macros for MCF_GPT_GMS */
+#define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0)
+#define MCF_GPT_GMS_GPIO(x) (((x)&0x00000003)<<4)
+#define MCF_GPT_GMS_IEN (0x00000100)
+#define MCF_GPT_GMS_OD (0x00000200)
+#define MCF_GPT_GMS_SC (0x00000400)
+#define MCF_GPT_GMS_CE (0x00001000)
+#define MCF_GPT_GMS_WDEN (0x00008000)
+#define MCF_GPT_GMS_ICT(x) (((x)&0x00000003)<<16)
+#define MCF_GPT_GMS_OCT(x) (((x)&0x00000003)<<20)
+#define MCF_GPT_GMS_OCPW(x) (((x)&0x000000FF)<<24)
+#define MCF_GPT_GMS_OCT_FRCLOW (0x00000000)
+#define MCF_GPT_GMS_OCT_PULSEHI (0x00100000)
+#define MCF_GPT_GMS_OCT_PULSELO (0x00200000)
+#define MCF_GPT_GMS_OCT_TOGGLE (0x00300000)
+#define MCF_GPT_GMS_ICT_ANY (0x00000000)
+#define MCF_GPT_GMS_ICT_RISE (0x00010000)
+#define MCF_GPT_GMS_ICT_FALL (0x00020000)
+#define MCF_GPT_GMS_ICT_PULSE (0x00030000)
+#define MCF_GPT_GMS_GPIO_INPUT (0x00000000)
+#define MCF_GPT_GMS_GPIO_OUTLO (0x00000020)
+#define MCF_GPT_GMS_GPIO_OUTHI (0x00000030)
+#define MCF_GPT_GMS_TMS_DISABLE (0x00000000)
+#define MCF_GPT_GMS_TMS_INCAPT (0x00000001)
+#define MCF_GPT_GMS_TMS_OUTCAPT (0x00000002)
+#define MCF_GPT_GMS_TMS_PWM (0x00000003)
+#define MCF_GPT_GMS_TMS_GPIO (0x00000004)
+
+/* Bit definitions and macros for MCF_GPT_GCIR */
+#define MCF_GPT_GCIR_CNT(x) (((x)&0x0000FFFF)<<0)
+#define MCF_GPT_GCIR_PRE(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for MCF_GPT_GPWM */
+#define MCF_GPT_GPWM_LOAD (0x00000001)
+#define MCF_GPT_GPWM_PWMOP (0x00000100)
+#define MCF_GPT_GPWM_WIDTH(x) (((x)&0x0000FFFF)<<16)
+
+/* Bit definitions and macros for MCF_GPT_GSR */
+#define MCF_GPT_GSR_CAPT (0x00000001)
+#define MCF_GPT_GSR_COMP (0x00000002)
+#define MCF_GPT_GSR_PWMP (0x00000004)
+#define MCF_GPT_GSR_TEXP (0x00000008)
+#define MCF_GPT_GSR_PIN (0x00000100)
+#define MCF_GPT_GSR_OVF(x) (((x)&0x00000007)<<12)
+#define MCF_GPT_GSR_CAPTURE(x) (((x)&0x0000FFFF)<<16)
+
+/********************************************************************/
+
+#endif /* m548xgpt_h */
diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m548xsim.h
new file mode 100644
index 0000000..149135e
--- /dev/null
+++ b/arch/m68k/include/asm/m548xsim.h
@@ -0,0 +1,55 @@
+/*
+ * m548xsim.h -- ColdFire 547x/548x System Integration Unit support.
+ */
+
+#ifndef m548xsim_h
+#define m548xsim_h
+
+#define MCFINT_VECBASE 64
+
+/*
+ * Interrupt Controller Registers
+ */
+#define MCFICM_INTC0 0x0700 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */
+#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
+
+/*
+ * Some PSC related definitions
+ */
+#define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3))
+#define MCF_PAR_SDA (0x0008)
+#define MCF_PAR_SCL (0x0004)
+#define MCF_PAR_PSC_TXD (0x04)
+#define MCF_PAR_PSC_RXD (0x08)
+#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4)
+#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6)
+#define MCF_PAR_PSC_CTS_GPIO (0x00)
+#define MCF_PAR_PSC_CTS_BCLK (0x80)
+#define MCF_PAR_PSC_CTS_CTS (0xC0)
+#define MCF_PAR_PSC_RTS_GPIO (0x00)
+#define MCF_PAR_PSC_RTS_FSYNC (0x20)
+#define MCF_PAR_PSC_RTS_RTS (0x30)
+#define MCF_PAR_PSC_CANRX (0x40)
+
+#endif /* m548xsim_h */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
index c042634..f49dfc0 100644
--- a/arch/m68k/include/asm/mcfcache.h
+++ b/arch/m68k/include/asm/mcfcache.h
@@ -107,7 +107,7 @@
.endm
#endif /* CONFIG_M532x */
-#if defined(CONFIG_M5407)
+#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
/*
* Version 4 cores have a true harvard style separate instruction
* and data cache. Invalidate and enable cache, also enable write
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 9c70a67..6901fd6 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -41,6 +41,8 @@
#elif defined(CONFIG_M5407)
#include <asm/m5407sim.h>
#include <asm/mcfintc.h>
+#elif defined(CONFIG_M548x)
+#include <asm/m548xsim.h>
#endif
/****************************************************************************/
diff --git a/arch/m68k/include/asm/mcfslt.h b/arch/m68k/include/asm/mcfslt.h
new file mode 100644
index 0000000..d0d0ecb
--- /dev/null
+++ b/arch/m68k/include/asm/mcfslt.h
@@ -0,0 +1,44 @@
+/****************************************************************************/
+
+/*
+ * mcfslt.h -- ColdFire internal Slice (SLT) timer support defines.
+ *
+ * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2009, Philippe De Muyter (phdm@macqel.be)
+ */
+
+/****************************************************************************/
+#ifndef mcfslt_h
+#define mcfslt_h
+/****************************************************************************/
+
+/*
+ * Get address specific defines for the 547x.
+ */
+#define MCFSLT_TIMER0 0x900 /* Base address of TIMER0 */
+#define MCFSLT_TIMER1 0x910 /* Base address of TIMER1 */
+
+
+/*
+ * Define the SLT timer register set addresses.
+ */
+#define MCFSLT_STCNT 0x00 /* Terminal count */
+#define MCFSLT_SCR 0x04 /* Control */
+#define MCFSLT_SCNT 0x08 /* Current count */
+#define MCFSLT_SSR 0x0C /* Status */
+
+/*
+ * Bit definitions for the SCR control register.
+ */
+#define MCFSLT_SCR_RUN 0x04000000 /* Run mode (continuous) */
+#define MCFSLT_SCR_IEN 0x02000000 /* Interrupt enable */
+#define MCFSLT_SCR_TEN 0x01000000 /* Timer enable */
+
+/*
+ * Bit definitions for the SSR status register.
+ */
+#define MCFSLT_SSR_BE 0x02000000 /* Bus error condition */
+#define MCFSLT_SSR_TE 0x01000000 /* Timeout condition */
+
+/****************************************************************************/
+#endif /* mcfslt_h */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index 01a8716..af16f3b 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -47,6 +47,11 @@
#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
+#elif defined(CONFIG_M548x)
+#define MCFUART_BASE1 0x8600 /* on M548x */
+#define MCFUART_BASE2 0x8700 /* on M548x */
+#define MCFUART_BASE3 0x8800 /* on M548x */
+#define MCFUART_BASE4 0x8900 /* on M548x */
#endif