| /* display7seg.c - Driver implementation for the 7-segment display | 
 |  *                 present on Sun Microsystems CP1400 and CP1500 | 
 |  * | 
 |  * Copyright (c) 2000 Eric Brower (ebrower@usa.net) | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/major.h> | 
 | #include <linux/init.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/ioport.h>		/* request_region */ | 
 | #include <linux/slab.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/atomic.h> | 
 | #include <asm/uaccess.h>		/* put_/get_user			*/ | 
 | #include <asm/io.h> | 
 |  | 
 | #include <asm/display7seg.h> | 
 |  | 
 | #define D7S_MINOR	193 | 
 | #define DRIVER_NAME	"d7s" | 
 | #define PFX		DRIVER_NAME ": " | 
 |  | 
 | static DEFINE_MUTEX(d7s_mutex); | 
 | static int sol_compat = 0;		/* Solaris compatibility mode	*/ | 
 |  | 
 | /* Solaris compatibility flag - | 
 |  * The Solaris implementation omits support for several | 
 |  * documented driver features (ref Sun doc 806-0180-03).   | 
 |  * By default, this module supports the documented driver  | 
 |  * abilities, rather than the Solaris implementation: | 
 |  * | 
 |  * 	1) Device ALWAYS reverts to OBP-specified FLIPPED mode | 
 |  * 	   upon closure of device or module unload. | 
 |  * 	2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of | 
 |  * 	   FLIP bit | 
 |  * | 
 |  * If you wish the device to operate as under Solaris, | 
 |  * omitting above features, set this parameter to non-zero. | 
 |  */ | 
 | module_param(sol_compat, int, 0); | 
 | MODULE_PARM_DESC(sol_compat,  | 
 | 		 "Disables documented functionality omitted from Solaris driver"); | 
 |  | 
 | MODULE_AUTHOR("Eric Brower <ebrower@usa.net>"); | 
 | MODULE_DESCRIPTION("7-Segment Display driver for Sun Microsystems CP1400/1500"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_SUPPORTED_DEVICE("d7s"); | 
 |  | 
 | struct d7s { | 
 | 	void __iomem	*regs; | 
 | 	bool		flipped; | 
 | }; | 
 | struct d7s *d7s_device; | 
 |  | 
 | /* | 
 |  * Register block address- see header for details | 
 |  * ----------------------------------------- | 
 |  * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 | | 
 |  * ----------------------------------------- | 
 |  * | 
 |  * DP 		- Toggles decimal point on/off  | 
 |  * ALARM	- Toggles "Alarm" LED green/red | 
 |  * FLIP		- Inverts display for upside-down mounted board | 
 |  * bits 0-4	- 7-segment display contents | 
 |  */ | 
 | static atomic_t d7s_users = ATOMIC_INIT(0); | 
 |  | 
 | static int d7s_open(struct inode *inode, struct file *f) | 
 | { | 
 | 	if (D7S_MINOR != iminor(inode)) | 
 | 		return -ENODEV; | 
 | 	atomic_inc(&d7s_users); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int d7s_release(struct inode *inode, struct file *f) | 
 | { | 
 | 	/* Reset flipped state to OBP default only if | 
 | 	 * no other users have the device open and we | 
 | 	 * are not operating in solaris-compat mode | 
 | 	 */ | 
 | 	if (atomic_dec_and_test(&d7s_users) && !sol_compat) { | 
 | 		struct d7s *p = d7s_device; | 
 | 		u8 regval = 0; | 
 |  | 
 | 		regval = readb(p->regs); | 
 | 		if (p->flipped) | 
 | 			regval |= D7S_FLIP; | 
 | 		else | 
 | 			regval &= ~D7S_FLIP; | 
 | 		writeb(regval, p->regs); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct d7s *p = d7s_device; | 
 | 	u8 regs = readb(p->regs); | 
 | 	int error = 0; | 
 | 	u8 ireg = 0; | 
 |  | 
 | 	if (D7S_MINOR != iminor(file->f_path.dentry->d_inode)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	mutex_lock(&d7s_mutex); | 
 | 	switch (cmd) { | 
 | 	case D7SIOCWR: | 
 | 		/* assign device register values we mask-out D7S_FLIP | 
 | 		 * if in sol_compat mode | 
 | 		 */ | 
 | 		if (get_user(ireg, (int __user *) arg)) { | 
 | 			error = -EFAULT; | 
 | 			break; | 
 | 		} | 
 | 		if (sol_compat) { | 
 | 			if (regs & D7S_FLIP) | 
 | 				ireg |= D7S_FLIP; | 
 | 			else | 
 | 				ireg &= ~D7S_FLIP; | 
 | 		} | 
 | 		writeb(ireg, p->regs); | 
 | 		break; | 
 |  | 
 | 	case D7SIOCRD: | 
 | 		/* retrieve device register values | 
 | 		 * NOTE: Solaris implementation returns D7S_FLIP bit | 
 | 		 * as toggled by user, even though it does not honor it. | 
 | 		 * This driver will not misinform you about the state | 
 | 		 * of your hardware while in sol_compat mode | 
 | 		 */ | 
 | 		if (put_user(regs, (int __user *) arg)) { | 
 | 			error = -EFAULT; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case D7SIOCTM: | 
 | 		/* toggle device mode-- flip display orientation */ | 
 | 		if (regs & D7S_FLIP) | 
 | 			regs &= ~D7S_FLIP; | 
 | 		else | 
 | 			regs |= D7S_FLIP; | 
 | 		writeb(regs, p->regs); | 
 | 		break; | 
 | 	}; | 
 | 	mutex_unlock(&d7s_mutex); | 
 |  | 
 | 	return error; | 
 | } | 
 |  | 
 | static const struct file_operations d7s_fops = { | 
 | 	.owner =		THIS_MODULE, | 
 | 	.unlocked_ioctl =	d7s_ioctl, | 
 | 	.compat_ioctl =		d7s_ioctl, | 
 | 	.open =			d7s_open, | 
 | 	.release =		d7s_release, | 
 | 	.llseek = noop_llseek, | 
 | }; | 
 |  | 
 | static struct miscdevice d7s_miscdev = { | 
 | 	.minor		= D7S_MINOR, | 
 | 	.name		= DRIVER_NAME, | 
 | 	.fops		= &d7s_fops | 
 | }; | 
 |  | 
 | static int __devinit d7s_probe(struct platform_device *op) | 
 | { | 
 | 	struct device_node *opts; | 
 | 	int err = -EINVAL; | 
 | 	struct d7s *p; | 
 | 	u8 regs; | 
 |  | 
 | 	if (d7s_device) | 
 | 		goto out; | 
 |  | 
 | 	p = kzalloc(sizeof(*p), GFP_KERNEL); | 
 | 	err = -ENOMEM; | 
 | 	if (!p) | 
 | 		goto out; | 
 |  | 
 | 	p->regs = of_ioremap(&op->resource[0], 0, sizeof(u8), "d7s"); | 
 | 	if (!p->regs) { | 
 | 		printk(KERN_ERR PFX "Cannot map chip registers\n"); | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	err = misc_register(&d7s_miscdev); | 
 | 	if (err) { | 
 | 		printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n", | 
 | 		       D7S_MINOR); | 
 | 		goto out_iounmap; | 
 | 	} | 
 |  | 
 | 	/* OBP option "d7s-flipped?" is honored as default for the | 
 | 	 * device, and reset default when detached | 
 | 	 */ | 
 | 	regs = readb(p->regs); | 
 | 	opts = of_find_node_by_path("/options"); | 
 | 	if (opts && | 
 | 	    of_get_property(opts, "d7s-flipped?", NULL)) | 
 | 		p->flipped = true; | 
 |  | 
 | 	if (p->flipped) | 
 | 		regs |= D7S_FLIP; | 
 | 	else | 
 | 		regs &= ~D7S_FLIP; | 
 |  | 
 | 	writeb(regs,  p->regs); | 
 |  | 
 | 	printk(KERN_INFO PFX "7-Segment Display%s at [%s:0x%llx] %s\n", | 
 | 	       op->dev.of_node->full_name, | 
 | 	       (regs & D7S_FLIP) ? " (FLIPPED)" : "", | 
 | 	       op->resource[0].start, | 
 | 	       sol_compat ? "in sol_compat mode" : ""); | 
 |  | 
 | 	dev_set_drvdata(&op->dev, p); | 
 | 	d7s_device = p; | 
 | 	err = 0; | 
 |  | 
 | out: | 
 | 	return err; | 
 |  | 
 | out_iounmap: | 
 | 	of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | 
 |  | 
 | out_free: | 
 | 	kfree(p); | 
 | 	goto out; | 
 | } | 
 |  | 
 | static int __devexit d7s_remove(struct platform_device *op) | 
 | { | 
 | 	struct d7s *p = dev_get_drvdata(&op->dev); | 
 | 	u8 regs = readb(p->regs); | 
 |  | 
 | 	/* Honor OBP d7s-flipped? unless operating in solaris-compat mode */ | 
 | 	if (sol_compat) { | 
 | 		if (p->flipped) | 
 | 			regs |= D7S_FLIP; | 
 | 		else | 
 | 			regs &= ~D7S_FLIP; | 
 | 		writeb(regs, p->regs); | 
 | 	} | 
 |  | 
 | 	misc_deregister(&d7s_miscdev); | 
 | 	of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | 
 | 	kfree(p); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id d7s_match[] = { | 
 | 	{ | 
 | 		.name = "display7seg", | 
 | 	}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, d7s_match); | 
 |  | 
 | static struct platform_driver d7s_driver = { | 
 | 	.driver = { | 
 | 		.name = DRIVER_NAME, | 
 | 		.owner = THIS_MODULE, | 
 | 		.of_match_table = d7s_match, | 
 | 	}, | 
 | 	.probe		= d7s_probe, | 
 | 	.remove		= __devexit_p(d7s_remove), | 
 | }; | 
 |  | 
 | module_platform_driver(d7s_driver); |