|  | /* | 
|  | *  linux/sound/oss/dmasound/dmasound_paula.c | 
|  | * | 
|  | *  Amiga `Paula' DMA Sound Driver | 
|  | * | 
|  | *  See linux/sound/oss/dmasound/dmasound_core.c for copyright and credits | 
|  | *  prior to 28/01/2001 | 
|  | * | 
|  | *  28/01/2001 [0.1] Iain Sandoe | 
|  | *		     - added versioning | 
|  | *		     - put in and populated the hardware_afmts field. | 
|  | *             [0.2] - put in SNDCTL_DSP_GETCAPS value. | 
|  | *	       [0.3] - put in constraint on state buffer usage. | 
|  | *	       [0.4] - put in default hard/soft settings | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/soundcard.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/setup.h> | 
|  | #include <asm/amigahw.h> | 
|  | #include <asm/amigaints.h> | 
|  | #include <asm/machdep.h> | 
|  |  | 
|  | #include "dmasound.h" | 
|  |  | 
|  | #define DMASOUND_PAULA_REVISION 0 | 
|  | #define DMASOUND_PAULA_EDITION 4 | 
|  |  | 
|  | #define custom amiga_custom | 
|  | /* | 
|  | *	The minimum period for audio depends on htotal (for OCS/ECS/AGA) | 
|  | *	(Imported from arch/m68k/amiga/amisound.c) | 
|  | */ | 
|  |  | 
|  | extern volatile u_short amiga_audio_min_period; | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	amiga_mksound() should be able to restore the period after beeping | 
|  | *	(Imported from arch/m68k/amiga/amisound.c) | 
|  | */ | 
|  |  | 
|  | extern u_short amiga_audio_period; | 
|  |  | 
|  |  | 
|  | /* | 
|  | *	Audio DMA masks | 
|  | */ | 
|  |  | 
|  | #define AMI_AUDIO_OFF	(DMAF_AUD0 | DMAF_AUD1 | DMAF_AUD2 | DMAF_AUD3) | 
|  | #define AMI_AUDIO_8	(DMAF_SETCLR | DMAF_MASTER | DMAF_AUD0 | DMAF_AUD1) | 
|  | #define AMI_AUDIO_14	(AMI_AUDIO_8 | DMAF_AUD2 | DMAF_AUD3) | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Helper pointers for 16(14)-bit sound | 
|  | */ | 
|  |  | 
|  | static int write_sq_block_size_half, write_sq_block_size_quarter; | 
|  |  | 
|  |  | 
|  | /*** Low level stuff *********************************************************/ | 
|  |  | 
|  |  | 
|  | static void *AmiAlloc(unsigned int size, gfp_t flags); | 
|  | static void AmiFree(void *obj, unsigned int size); | 
|  | static int AmiIrqInit(void); | 
|  | #ifdef MODULE | 
|  | static void AmiIrqCleanUp(void); | 
|  | #endif | 
|  | static void AmiSilence(void); | 
|  | static void AmiInit(void); | 
|  | static int AmiSetFormat(int format); | 
|  | static int AmiSetVolume(int volume); | 
|  | static int AmiSetTreble(int treble); | 
|  | static void AmiPlayNextFrame(int index); | 
|  | static void AmiPlay(void); | 
|  | static irqreturn_t AmiInterrupt(int irq, void *dummy); | 
|  |  | 
|  | #ifdef CONFIG_HEARTBEAT | 
|  |  | 
|  | /* | 
|  | *  Heartbeat interferes with sound since the 7 kHz low-pass filter and the | 
|  | *  power LED are controlled by the same line. | 
|  | */ | 
|  |  | 
|  | static void (*saved_heartbeat)(int) = NULL; | 
|  |  | 
|  | static inline void disable_heartbeat(void) | 
|  | { | 
|  | if (mach_heartbeat) { | 
|  | saved_heartbeat = mach_heartbeat; | 
|  | mach_heartbeat = NULL; | 
|  | } | 
|  | AmiSetTreble(dmasound.treble); | 
|  | } | 
|  |  | 
|  | static inline void enable_heartbeat(void) | 
|  | { | 
|  | if (saved_heartbeat) | 
|  | mach_heartbeat = saved_heartbeat; | 
|  | } | 
|  | #else /* !CONFIG_HEARTBEAT */ | 
|  | #define disable_heartbeat()	do { } while (0) | 
|  | #define enable_heartbeat()	do { } while (0) | 
|  | #endif /* !CONFIG_HEARTBEAT */ | 
|  |  | 
|  |  | 
|  | /*** Mid level stuff *********************************************************/ | 
|  |  | 
|  | static void AmiMixerInit(void); | 
|  | static int AmiMixerIoctl(u_int cmd, u_long arg); | 
|  | static int AmiWriteSqSetup(void); | 
|  | static int AmiStateInfo(char *buffer, size_t space); | 
|  |  | 
|  |  | 
|  | /*** Translations ************************************************************/ | 
|  |  | 
|  | /* ++TeSche: radically changed for new expanding purposes... | 
|  | * | 
|  | * These two routines now deal with copying/expanding/translating the samples | 
|  | * from user space into our buffer at the right frequency. They take care about | 
|  | * how much data there's actually to read, how much buffer space there is and | 
|  | * to convert samples into the right frequency/encoding. They will only work on | 
|  | * complete samples so it may happen they leave some bytes in the input stream | 
|  | * if the user didn't write a multiple of the current sample size. They both | 
|  | * return the number of bytes they've used from both streams so you may detect | 
|  | * such a situation. Luckily all programs should be able to cope with that. | 
|  | * | 
|  | * I think I've optimized anything as far as one can do in plain C, all | 
|  | * variables should fit in registers and the loops are really short. There's | 
|  | * one loop for every possible situation. Writing a more generalized and thus | 
|  | * parameterized loop would only produce slower code. Feel free to optimize | 
|  | * this in assembler if you like. :) | 
|  | * | 
|  | * I think these routines belong here because they're not yet really hardware | 
|  | * independent, especially the fact that the Falcon can play 16bit samples | 
|  | * only in stereo is hardcoded in both of them! | 
|  | * | 
|  | * ++geert: split in even more functions (one per format) | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Native format | 
|  | */ | 
|  |  | 
|  | static ssize_t ami_ct_s8(const u_char __user *userPtr, size_t userCount, | 
|  | u_char frame[], ssize_t *frameUsed, ssize_t frameLeft) | 
|  | { | 
|  | ssize_t count, used; | 
|  |  | 
|  | if (!dmasound.soft.stereo) { | 
|  | void *p = &frame[*frameUsed]; | 
|  | count = min_t(unsigned long, userCount, frameLeft) & ~1; | 
|  | used = count; | 
|  | if (copy_from_user(p, userPtr, count)) | 
|  | return -EFAULT; | 
|  | } else { | 
|  | u_char *left = &frame[*frameUsed>>1]; | 
|  | u_char *right = left+write_sq_block_size_half; | 
|  | count = min_t(unsigned long, userCount, frameLeft)>>1 & ~1; | 
|  | used = count*2; | 
|  | while (count > 0) { | 
|  | if (get_user(*left++, userPtr++) | 
|  | || get_user(*right++, userPtr++)) | 
|  | return -EFAULT; | 
|  | count--; | 
|  | } | 
|  | } | 
|  | *frameUsed += used; | 
|  | return used; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Copy and convert 8 bit data | 
|  | */ | 
|  |  | 
|  | #define GENERATE_AMI_CT8(funcname, convsample)				\ | 
|  | static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\ | 
|  | u_char frame[], ssize_t *frameUsed,		\ | 
|  | ssize_t frameLeft)				\ | 
|  | {									\ | 
|  | ssize_t count, used;						\ | 
|  | \ | 
|  | if (!dmasound.soft.stereo) {					\ | 
|  | u_char *p = &frame[*frameUsed];				\ | 
|  | count = min_t(size_t, userCount, frameLeft) & ~1;	\ | 
|  | used = count;						\ | 
|  | while (count > 0) {					\ | 
|  | u_char data;					\ | 
|  | if (get_user(data, userPtr++))			\ | 
|  | return -EFAULT;				\ | 
|  | *p++ = convsample(data);			\ | 
|  | count--;					\ | 
|  | }							\ | 
|  | } else {							\ | 
|  | u_char *left = &frame[*frameUsed>>1];			\ | 
|  | u_char *right = left+write_sq_block_size_half;		\ | 
|  | count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\ | 
|  | used = count*2;						\ | 
|  | while (count > 0) {					\ | 
|  | u_char data;					\ | 
|  | if (get_user(data, userPtr++))			\ | 
|  | return -EFAULT;				\ | 
|  | *left++ = convsample(data);			\ | 
|  | if (get_user(data, userPtr++))			\ | 
|  | return -EFAULT;				\ | 
|  | *right++ = convsample(data);			\ | 
|  | count--;					\ | 
|  | }							\ | 
|  | }								\ | 
|  | *frameUsed += used;						\ | 
|  | return used;							\ | 
|  | } | 
|  |  | 
|  | #define AMI_CT_ULAW(x)	(dmasound_ulaw2dma8[(x)]) | 
|  | #define AMI_CT_ALAW(x)	(dmasound_alaw2dma8[(x)]) | 
|  | #define AMI_CT_U8(x)	((x) ^ 0x80) | 
|  |  | 
|  | GENERATE_AMI_CT8(ami_ct_ulaw, AMI_CT_ULAW) | 
|  | GENERATE_AMI_CT8(ami_ct_alaw, AMI_CT_ALAW) | 
|  | GENERATE_AMI_CT8(ami_ct_u8, AMI_CT_U8) | 
|  |  | 
|  |  | 
|  | /* | 
|  | *  Copy and convert 16 bit data | 
|  | */ | 
|  |  | 
|  | #define GENERATE_AMI_CT_16(funcname, convsample)			\ | 
|  | static ssize_t funcname(const u_char __user *userPtr, size_t userCount,	\ | 
|  | u_char frame[], ssize_t *frameUsed,		\ | 
|  | ssize_t frameLeft)				\ | 
|  | {									\ | 
|  | const u_short __user *ptr = (const u_short __user *)userPtr;	\ | 
|  | ssize_t count, used;						\ | 
|  | u_short data;							\ | 
|  | \ | 
|  | if (!dmasound.soft.stereo) {					\ | 
|  | u_char *high = &frame[*frameUsed>>1];			\ | 
|  | u_char *low = high+write_sq_block_size_half;		\ | 
|  | count = min_t(size_t, userCount, frameLeft)>>1 & ~1;	\ | 
|  | used = count*2;						\ | 
|  | while (count > 0) {					\ | 
|  | if (get_user(data, ptr++))			\ | 
|  | return -EFAULT;				\ | 
|  | data = convsample(data);			\ | 
|  | *high++ = data>>8;				\ | 
|  | *low++ = (data>>2) & 0x3f;			\ | 
|  | count--;					\ | 
|  | }							\ | 
|  | } else {							\ | 
|  | u_char *lefth = &frame[*frameUsed>>2];			\ | 
|  | u_char *leftl = lefth+write_sq_block_size_quarter;	\ | 
|  | u_char *righth = lefth+write_sq_block_size_half;	\ | 
|  | u_char *rightl = righth+write_sq_block_size_quarter;	\ | 
|  | count = min_t(size_t, userCount, frameLeft)>>2 & ~1;	\ | 
|  | used = count*4;						\ | 
|  | while (count > 0) {					\ | 
|  | if (get_user(data, ptr++))			\ | 
|  | return -EFAULT;				\ | 
|  | data = convsample(data);			\ | 
|  | *lefth++ = data>>8;				\ | 
|  | *leftl++ = (data>>2) & 0x3f;			\ | 
|  | if (get_user(data, ptr++))			\ | 
|  | return -EFAULT;				\ | 
|  | data = convsample(data);			\ | 
|  | *righth++ = data>>8;				\ | 
|  | *rightl++ = (data>>2) & 0x3f;			\ | 
|  | count--;					\ | 
|  | }							\ | 
|  | }								\ | 
|  | *frameUsed += used;						\ | 
|  | return used;							\ | 
|  | } | 
|  |  | 
|  | #define AMI_CT_S16BE(x)	(x) | 
|  | #define AMI_CT_U16BE(x)	((x) ^ 0x8000) | 
|  | #define AMI_CT_S16LE(x)	(le2be16((x))) | 
|  | #define AMI_CT_U16LE(x)	(le2be16((x)) ^ 0x8000) | 
|  |  | 
|  | GENERATE_AMI_CT_16(ami_ct_s16be, AMI_CT_S16BE) | 
|  | GENERATE_AMI_CT_16(ami_ct_u16be, AMI_CT_U16BE) | 
|  | GENERATE_AMI_CT_16(ami_ct_s16le, AMI_CT_S16LE) | 
|  | GENERATE_AMI_CT_16(ami_ct_u16le, AMI_CT_U16LE) | 
|  |  | 
|  |  | 
|  | static TRANS transAmiga = { | 
|  | .ct_ulaw	= ami_ct_ulaw, | 
|  | .ct_alaw	= ami_ct_alaw, | 
|  | .ct_s8		= ami_ct_s8, | 
|  | .ct_u8		= ami_ct_u8, | 
|  | .ct_s16be	= ami_ct_s16be, | 
|  | .ct_u16be	= ami_ct_u16be, | 
|  | .ct_s16le	= ami_ct_s16le, | 
|  | .ct_u16le	= ami_ct_u16le, | 
|  | }; | 
|  |  | 
|  | /*** Low level stuff *********************************************************/ | 
|  |  | 
|  | static inline void StopDMA(void) | 
|  | { | 
|  | custom.aud[0].audvol = custom.aud[1].audvol = 0; | 
|  | custom.aud[2].audvol = custom.aud[3].audvol = 0; | 
|  | custom.dmacon = AMI_AUDIO_OFF; | 
|  | enable_heartbeat(); | 
|  | } | 
|  |  | 
|  | static void *AmiAlloc(unsigned int size, gfp_t flags) | 
|  | { | 
|  | return amiga_chip_alloc((long)size, "dmasound [Paula]"); | 
|  | } | 
|  |  | 
|  | static void AmiFree(void *obj, unsigned int size) | 
|  | { | 
|  | amiga_chip_free (obj); | 
|  | } | 
|  |  | 
|  | static int __init AmiIrqInit(void) | 
|  | { | 
|  | /* turn off DMA for audio channels */ | 
|  | StopDMA(); | 
|  |  | 
|  | /* Register interrupt handler. */ | 
|  | if (request_irq(IRQ_AMIGA_AUD0, AmiInterrupt, 0, "DMA sound", | 
|  | AmiInterrupt)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef MODULE | 
|  | static void AmiIrqCleanUp(void) | 
|  | { | 
|  | /* turn off DMA for audio channels */ | 
|  | StopDMA(); | 
|  | /* release the interrupt */ | 
|  | free_irq(IRQ_AMIGA_AUD0, AmiInterrupt); | 
|  | } | 
|  | #endif /* MODULE */ | 
|  |  | 
|  | static void AmiSilence(void) | 
|  | { | 
|  | /* turn off DMA for audio channels */ | 
|  | StopDMA(); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void AmiInit(void) | 
|  | { | 
|  | int period, i; | 
|  |  | 
|  | AmiSilence(); | 
|  |  | 
|  | if (dmasound.soft.speed) | 
|  | period = amiga_colorclock/dmasound.soft.speed-1; | 
|  | else | 
|  | period = amiga_audio_min_period; | 
|  | dmasound.hard = dmasound.soft; | 
|  | dmasound.trans_write = &transAmiga; | 
|  |  | 
|  | if (period < amiga_audio_min_period) { | 
|  | /* we would need to squeeze the sound, but we won't do that */ | 
|  | period = amiga_audio_min_period; | 
|  | } else if (period > 65535) { | 
|  | period = 65535; | 
|  | } | 
|  | dmasound.hard.speed = amiga_colorclock/(period+1); | 
|  |  | 
|  | for (i = 0; i < 4; i++) | 
|  | custom.aud[i].audper = period; | 
|  | amiga_audio_period = period; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int AmiSetFormat(int format) | 
|  | { | 
|  | int size; | 
|  |  | 
|  | /* Amiga sound DMA supports 8bit and 16bit (pseudo 14 bit) modes */ | 
|  |  | 
|  | switch (format) { | 
|  | case AFMT_QUERY: | 
|  | return dmasound.soft.format; | 
|  | case AFMT_MU_LAW: | 
|  | case AFMT_A_LAW: | 
|  | case AFMT_U8: | 
|  | case AFMT_S8: | 
|  | size = 8; | 
|  | break; | 
|  | case AFMT_S16_BE: | 
|  | case AFMT_U16_BE: | 
|  | case AFMT_S16_LE: | 
|  | case AFMT_U16_LE: | 
|  | size = 16; | 
|  | break; | 
|  | default: /* :-) */ | 
|  | size = 8; | 
|  | format = AFMT_S8; | 
|  | } | 
|  |  | 
|  | dmasound.soft.format = format; | 
|  | dmasound.soft.size = size; | 
|  | if (dmasound.minDev == SND_DEV_DSP) { | 
|  | dmasound.dsp.format = format; | 
|  | dmasound.dsp.size = dmasound.soft.size; | 
|  | } | 
|  | AmiInit(); | 
|  |  | 
|  | return format; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define VOLUME_VOXWARE_TO_AMI(v) \ | 
|  | (((v) < 0) ? 0 : ((v) > 100) ? 64 : ((v) * 64)/100) | 
|  | #define VOLUME_AMI_TO_VOXWARE(v) ((v)*100/64) | 
|  |  | 
|  | static int AmiSetVolume(int volume) | 
|  | { | 
|  | dmasound.volume_left = VOLUME_VOXWARE_TO_AMI(volume & 0xff); | 
|  | custom.aud[0].audvol = dmasound.volume_left; | 
|  | dmasound.volume_right = VOLUME_VOXWARE_TO_AMI((volume & 0xff00) >> 8); | 
|  | custom.aud[1].audvol = dmasound.volume_right; | 
|  | if (dmasound.hard.size == 16) { | 
|  | if (dmasound.volume_left == 64 && dmasound.volume_right == 64) { | 
|  | custom.aud[2].audvol = 1; | 
|  | custom.aud[3].audvol = 1; | 
|  | } else { | 
|  | custom.aud[2].audvol = 0; | 
|  | custom.aud[3].audvol = 0; | 
|  | } | 
|  | } | 
|  | return VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) | | 
|  | (VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8); | 
|  | } | 
|  |  | 
|  | static int AmiSetTreble(int treble) | 
|  | { | 
|  | dmasound.treble = treble; | 
|  | if (treble < 50) | 
|  | ciaa.pra &= ~0x02; | 
|  | else | 
|  | ciaa.pra |= 0x02; | 
|  | return treble; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define AMI_PLAY_LOADED		1 | 
|  | #define AMI_PLAY_PLAYING	2 | 
|  | #define AMI_PLAY_MASK		3 | 
|  |  | 
|  |  | 
|  | static void AmiPlayNextFrame(int index) | 
|  | { | 
|  | u_char *start, *ch0, *ch1, *ch2, *ch3; | 
|  | u_long size; | 
|  |  | 
|  | /* used by AmiPlay() if all doubts whether there really is something | 
|  | * to be played are already wiped out. | 
|  | */ | 
|  | start = write_sq.buffers[write_sq.front]; | 
|  | size = (write_sq.count == index ? write_sq.rear_size | 
|  | : write_sq.block_size)>>1; | 
|  |  | 
|  | if (dmasound.hard.stereo) { | 
|  | ch0 = start; | 
|  | ch1 = start+write_sq_block_size_half; | 
|  | size >>= 1; | 
|  | } else { | 
|  | ch0 = start; | 
|  | ch1 = start; | 
|  | } | 
|  |  | 
|  | disable_heartbeat(); | 
|  | custom.aud[0].audvol = dmasound.volume_left; | 
|  | custom.aud[1].audvol = dmasound.volume_right; | 
|  | if (dmasound.hard.size == 8) { | 
|  | custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0); | 
|  | custom.aud[0].audlen = size; | 
|  | custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1); | 
|  | custom.aud[1].audlen = size; | 
|  | custom.dmacon = AMI_AUDIO_8; | 
|  | } else { | 
|  | size >>= 1; | 
|  | custom.aud[0].audlc = (u_short *)ZTWO_PADDR(ch0); | 
|  | custom.aud[0].audlen = size; | 
|  | custom.aud[1].audlc = (u_short *)ZTWO_PADDR(ch1); | 
|  | custom.aud[1].audlen = size; | 
|  | if (dmasound.volume_left == 64 && dmasound.volume_right == 64) { | 
|  | /* We can play pseudo 14-bit only with the maximum volume */ | 
|  | ch3 = ch0+write_sq_block_size_quarter; | 
|  | ch2 = ch1+write_sq_block_size_quarter; | 
|  | custom.aud[2].audvol = 1;  /* we are being affected by the beeps */ | 
|  | custom.aud[3].audvol = 1;  /* restoring volume here helps a bit */ | 
|  | custom.aud[2].audlc = (u_short *)ZTWO_PADDR(ch2); | 
|  | custom.aud[2].audlen = size; | 
|  | custom.aud[3].audlc = (u_short *)ZTWO_PADDR(ch3); | 
|  | custom.aud[3].audlen = size; | 
|  | custom.dmacon = AMI_AUDIO_14; | 
|  | } else { | 
|  | custom.aud[2].audvol = 0; | 
|  | custom.aud[3].audvol = 0; | 
|  | custom.dmacon = AMI_AUDIO_8; | 
|  | } | 
|  | } | 
|  | write_sq.front = (write_sq.front+1) % write_sq.max_count; | 
|  | write_sq.active |= AMI_PLAY_LOADED; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void AmiPlay(void) | 
|  | { | 
|  | int minframes = 1; | 
|  |  | 
|  | custom.intena = IF_AUD0; | 
|  |  | 
|  | if (write_sq.active & AMI_PLAY_LOADED) { | 
|  | /* There's already a frame loaded */ | 
|  | custom.intena = IF_SETCLR | IF_AUD0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (write_sq.active & AMI_PLAY_PLAYING) | 
|  | /* Increase threshold: frame 1 is already being played */ | 
|  | minframes = 2; | 
|  |  | 
|  | if (write_sq.count < minframes) { | 
|  | /* Nothing to do */ | 
|  | custom.intena = IF_SETCLR | IF_AUD0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (write_sq.count <= minframes && | 
|  | write_sq.rear_size < write_sq.block_size && !write_sq.syncing) { | 
|  | /* hmmm, the only existing frame is not | 
|  | * yet filled and we're not syncing? | 
|  | */ | 
|  | custom.intena = IF_SETCLR | IF_AUD0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | AmiPlayNextFrame(minframes); | 
|  |  | 
|  | custom.intena = IF_SETCLR | IF_AUD0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t AmiInterrupt(int irq, void *dummy) | 
|  | { | 
|  | int minframes = 1; | 
|  |  | 
|  | custom.intena = IF_AUD0; | 
|  |  | 
|  | if (!write_sq.active) { | 
|  | /* Playing was interrupted and sq_reset() has already cleared | 
|  | * the sq variables, so better don't do anything here. | 
|  | */ | 
|  | WAKE_UP(write_sq.sync_queue); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | if (write_sq.active & AMI_PLAY_PLAYING) { | 
|  | /* We've just finished a frame */ | 
|  | write_sq.count--; | 
|  | WAKE_UP(write_sq.action_queue); | 
|  | } | 
|  |  | 
|  | if (write_sq.active & AMI_PLAY_LOADED) | 
|  | /* Increase threshold: frame 1 is already being played */ | 
|  | minframes = 2; | 
|  |  | 
|  | /* Shift the flags */ | 
|  | write_sq.active = (write_sq.active<<1) & AMI_PLAY_MASK; | 
|  |  | 
|  | if (!write_sq.active) | 
|  | /* No frame is playing, disable audio DMA */ | 
|  | StopDMA(); | 
|  |  | 
|  | custom.intena = IF_SETCLR | IF_AUD0; | 
|  |  | 
|  | if (write_sq.count >= minframes) | 
|  | /* Try to play the next frame */ | 
|  | AmiPlay(); | 
|  |  | 
|  | if (!write_sq.active) | 
|  | /* Nothing to play anymore. | 
|  | Wake up a process waiting for audio output to drain. */ | 
|  | WAKE_UP(write_sq.sync_queue); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /*** Mid level stuff *********************************************************/ | 
|  |  | 
|  |  | 
|  | /* | 
|  | * /dev/mixer abstraction | 
|  | */ | 
|  |  | 
|  | static void __init AmiMixerInit(void) | 
|  | { | 
|  | dmasound.volume_left = 64; | 
|  | dmasound.volume_right = 64; | 
|  | custom.aud[0].audvol = dmasound.volume_left; | 
|  | custom.aud[3].audvol = 1;	/* For pseudo 14bit */ | 
|  | custom.aud[1].audvol = dmasound.volume_right; | 
|  | custom.aud[2].audvol = 1;	/* For pseudo 14bit */ | 
|  | dmasound.treble = 50; | 
|  | } | 
|  |  | 
|  | static int AmiMixerIoctl(u_int cmd, u_long arg) | 
|  | { | 
|  | int data; | 
|  | switch (cmd) { | 
|  | case SOUND_MIXER_READ_DEVMASK: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_VOLUME | SOUND_MASK_TREBLE); | 
|  | case SOUND_MIXER_READ_RECMASK: | 
|  | return IOCTL_OUT(arg, 0); | 
|  | case SOUND_MIXER_READ_STEREODEVS: | 
|  | return IOCTL_OUT(arg, SOUND_MASK_VOLUME); | 
|  | case SOUND_MIXER_READ_VOLUME: | 
|  | return IOCTL_OUT(arg, | 
|  | VOLUME_AMI_TO_VOXWARE(dmasound.volume_left) | | 
|  | VOLUME_AMI_TO_VOXWARE(dmasound.volume_right) << 8); | 
|  | case SOUND_MIXER_WRITE_VOLUME: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_volume(data)); | 
|  | case SOUND_MIXER_READ_TREBLE: | 
|  | return IOCTL_OUT(arg, dmasound.treble); | 
|  | case SOUND_MIXER_WRITE_TREBLE: | 
|  | IOCTL_IN(arg, data); | 
|  | return IOCTL_OUT(arg, dmasound_set_treble(data)); | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int AmiWriteSqSetup(void) | 
|  | { | 
|  | write_sq_block_size_half = write_sq.block_size>>1; | 
|  | write_sq_block_size_quarter = write_sq_block_size_half>>1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int AmiStateInfo(char *buffer, size_t space) | 
|  | { | 
|  | int len = 0; | 
|  | len += sprintf(buffer+len, "\tsound.volume_left = %d [0...64]\n", | 
|  | dmasound.volume_left); | 
|  | len += sprintf(buffer+len, "\tsound.volume_right = %d [0...64]\n", | 
|  | dmasound.volume_right); | 
|  | if (len >= space) { | 
|  | printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ; | 
|  | len = space ; | 
|  | } | 
|  | return len; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*** Machine definitions *****************************************************/ | 
|  |  | 
|  | static SETTINGS def_hard = { | 
|  | .format	= AFMT_S8, | 
|  | .stereo	= 0, | 
|  | .size	= 8, | 
|  | .speed	= 8000 | 
|  | } ; | 
|  |  | 
|  | static SETTINGS def_soft = { | 
|  | .format	= AFMT_U8, | 
|  | .stereo	= 0, | 
|  | .size	= 8, | 
|  | .speed	= 8000 | 
|  | } ; | 
|  |  | 
|  | static MACHINE machAmiga = { | 
|  | .name		= "Amiga", | 
|  | .name2		= "AMIGA", | 
|  | .owner		= THIS_MODULE, | 
|  | .dma_alloc	= AmiAlloc, | 
|  | .dma_free	= AmiFree, | 
|  | .irqinit	= AmiIrqInit, | 
|  | #ifdef MODULE | 
|  | .irqcleanup	= AmiIrqCleanUp, | 
|  | #endif /* MODULE */ | 
|  | .init		= AmiInit, | 
|  | .silence	= AmiSilence, | 
|  | .setFormat	= AmiSetFormat, | 
|  | .setVolume	= AmiSetVolume, | 
|  | .setTreble	= AmiSetTreble, | 
|  | .play		= AmiPlay, | 
|  | .mixer_init	= AmiMixerInit, | 
|  | .mixer_ioctl	= AmiMixerIoctl, | 
|  | .write_sq_setup	= AmiWriteSqSetup, | 
|  | .state_info	= AmiStateInfo, | 
|  | .min_dsp_speed	= 8000, | 
|  | .version	= ((DMASOUND_PAULA_REVISION<<8) | DMASOUND_PAULA_EDITION), | 
|  | .hardware_afmts	= (AFMT_S8 | AFMT_S16_BE), /* h'ware-supported formats *only* here */ | 
|  | .capabilities	= DSP_CAP_BATCH          /* As per SNDCTL_DSP_GETCAPS */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | /*** Config & Setup **********************************************************/ | 
|  |  | 
|  |  | 
|  | static int __init amiga_audio_probe(struct platform_device *pdev) | 
|  | { | 
|  | dmasound.mach = machAmiga; | 
|  | dmasound.mach.default_hard = def_hard ; | 
|  | dmasound.mach.default_soft = def_soft ; | 
|  | return dmasound_init(); | 
|  | } | 
|  |  | 
|  | static int __exit amiga_audio_remove(struct platform_device *pdev) | 
|  | { | 
|  | dmasound_deinit(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver amiga_audio_driver = { | 
|  | .remove = __exit_p(amiga_audio_remove), | 
|  | .driver   = { | 
|  | .name	= "amiga-audio", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init amiga_audio_init(void) | 
|  | { | 
|  | return platform_driver_probe(&amiga_audio_driver, amiga_audio_probe); | 
|  | } | 
|  |  | 
|  | module_init(amiga_audio_init); | 
|  |  | 
|  | static void __exit amiga_audio_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&amiga_audio_driver); | 
|  | } | 
|  |  | 
|  | module_exit(amiga_audio_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:amiga-audio"); |