| /* | 
 |  * rtc class driver for the Maxim MAX6900 chip | 
 |  * | 
 |  * Author: Dale Farnsworth <dale@farnsworth.org> | 
 |  * | 
 |  * based on previously existing rtc class drivers | 
 |  * | 
 |  * 2007 (c) MontaVista, Software, Inc.  This file is licensed under | 
 |  * the terms of the GNU General Public License version 2.  This program | 
 |  * is licensed "as is" without any warranty of any kind, whether express | 
 |  * or implied. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/bcd.h> | 
 | #include <linux/rtc.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #define DRV_NAME "max6900" | 
 | #define DRV_VERSION "0.1" | 
 |  | 
 | /* | 
 |  * register indices | 
 |  */ | 
 | #define MAX6900_REG_SC			0	/* seconds	00-59 */ | 
 | #define MAX6900_REG_MN			1	/* minutes	00-59 */ | 
 | #define MAX6900_REG_HR			2	/* hours	00-23 */ | 
 | #define MAX6900_REG_DT			3	/* day of month	00-31 */ | 
 | #define MAX6900_REG_MO			4	/* month	01-12 */ | 
 | #define MAX6900_REG_DW			5	/* day of week	 1-7  */ | 
 | #define MAX6900_REG_YR			6	/* year		00-99 */ | 
 | #define MAX6900_REG_CT			7	/* control */ | 
 | 						/* register 8 is undocumented */ | 
 | #define MAX6900_REG_CENTURY		9	/* century */ | 
 | #define MAX6900_REG_LEN			10 | 
 |  | 
 | #define MAX6900_BURST_LEN		8	/* can burst r/w first 8 regs */ | 
 |  | 
 | #define MAX6900_REG_CT_WP		(1 << 7)	/* Write Protect */ | 
 |  | 
 |  | 
 | /* | 
 |  * register read/write commands | 
 |  */ | 
 | #define MAX6900_REG_CONTROL_WRITE	0x8e | 
 | #define MAX6900_REG_CENTURY_WRITE	0x92 | 
 | #define MAX6900_REG_CENTURY_READ	0x93 | 
 | #define MAX6900_REG_RESERVED_READ	0x96 | 
 | #define MAX6900_REG_BURST_WRITE		0xbe | 
 | #define MAX6900_REG_BURST_READ		0xbf | 
 |  | 
 | #define MAX6900_IDLE_TIME_AFTER_WRITE	3	/* specification says 2.5 mS */ | 
 |  | 
 | #define MAX6900_I2C_ADDR		0xa0 | 
 |  | 
 | static const unsigned short normal_i2c[] = { | 
 | 	MAX6900_I2C_ADDR >> 1, | 
 | 	I2C_CLIENT_END | 
 | }; | 
 |  | 
 | I2C_CLIENT_INSMOD;			/* defines addr_data */ | 
 |  | 
 | static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind); | 
 |  | 
 | static int max6900_i2c_read_regs(struct i2c_client *client, u8 *buf) | 
 | { | 
 | 	u8 reg_burst_read[1] = { MAX6900_REG_BURST_READ }; | 
 | 	u8 reg_century_read[1] = { MAX6900_REG_CENTURY_READ }; | 
 | 	struct i2c_msg msgs[4] = { | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= 0, /* write */ | 
 | 			.len	= sizeof(reg_burst_read), | 
 | 			.buf	= reg_burst_read | 
 | 		}, | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= I2C_M_RD, | 
 | 			.len	= MAX6900_BURST_LEN, | 
 | 			.buf	= buf | 
 | 		}, | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= 0, /* write */ | 
 | 			.len	= sizeof(reg_century_read), | 
 | 			.buf	= reg_century_read | 
 | 		}, | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= I2C_M_RD, | 
 | 			.len	= sizeof(buf[MAX6900_REG_CENTURY]), | 
 | 			.buf	= &buf[MAX6900_REG_CENTURY] | 
 | 		} | 
 | 	}; | 
 | 	int rc; | 
 |  | 
 | 	rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); | 
 | 	if (rc != ARRAY_SIZE(msgs)) { | 
 | 		dev_err(&client->dev, "%s: register read failed\n", | 
 | 			__FUNCTION__); | 
 | 		return -EIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max6900_i2c_write_regs(struct i2c_client *client, u8 const *buf) | 
 | { | 
 | 	u8 i2c_century_buf[1 + 1] = { MAX6900_REG_CENTURY_WRITE }; | 
 | 	struct i2c_msg century_msgs[1] = { | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= 0, /* write */ | 
 | 			.len	= sizeof(i2c_century_buf), | 
 | 			.buf	= i2c_century_buf | 
 | 		} | 
 | 	}; | 
 | 	u8 i2c_burst_buf[MAX6900_BURST_LEN + 1] = { MAX6900_REG_BURST_WRITE }; | 
 | 	struct i2c_msg burst_msgs[1] = { | 
 | 		{ | 
 | 			.addr	= client->addr, | 
 | 			.flags	= 0, /* write */ | 
 | 			.len	= sizeof(i2c_burst_buf), | 
 | 			.buf	= i2c_burst_buf | 
 | 		} | 
 | 	}; | 
 | 	int rc; | 
 |  | 
 | 	/* | 
 | 	 * We have to make separate calls to i2c_transfer because of | 
 | 	 * the need to delay after each write to the chip.  Also, | 
 | 	 * we write the century byte first, since we set the write-protect | 
 | 	 * bit as part of the burst write. | 
 | 	 */ | 
 | 	i2c_century_buf[1] = buf[MAX6900_REG_CENTURY]; | 
 | 	rc = i2c_transfer(client->adapter, century_msgs, | 
 | 			  ARRAY_SIZE(century_msgs)); | 
 | 	if (rc != ARRAY_SIZE(century_msgs)) | 
 | 		goto write_failed; | 
 | 	msleep(MAX6900_IDLE_TIME_AFTER_WRITE); | 
 |  | 
 | 	memcpy(&i2c_burst_buf[1], buf, MAX6900_BURST_LEN); | 
 |  | 
 | 	rc = i2c_transfer(client->adapter, burst_msgs, ARRAY_SIZE(burst_msgs)); | 
 | 	if (rc != ARRAY_SIZE(burst_msgs)) | 
 | 		goto write_failed; | 
 | 	msleep(MAX6900_IDLE_TIME_AFTER_WRITE); | 
 |  | 
 | 	return 0; | 
 |  | 
 | write_failed: | 
 | 	dev_err(&client->dev, "%s: register write failed\n", | 
 | 		__FUNCTION__); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static int max6900_i2c_validate_client(struct i2c_client *client) | 
 | { | 
 | 	u8 regs[MAX6900_REG_LEN]; | 
 | 	u8 zero_mask[] = { | 
 | 		0x80,	/* seconds */ | 
 | 		0x80,	/* minutes */ | 
 | 		0x40,	/* hours */ | 
 | 		0xc0,	/* day of month */ | 
 | 		0xe0,	/* month */ | 
 | 		0xf8,	/* day of week */ | 
 | 		0x00,	/* year */ | 
 | 		0x7f,	/* control */ | 
 | 	}; | 
 | 	int i; | 
 | 	int rc; | 
 | 	int reserved; | 
 |  | 
 | 	reserved = i2c_smbus_read_byte_data(client, MAX6900_REG_RESERVED_READ); | 
 | 	if (reserved != 0x07) | 
 | 		return -ENODEV; | 
 |  | 
 | 	rc = max6900_i2c_read_regs(client, regs); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(zero_mask); ++i) { | 
 | 		if (regs[i] & zero_mask[i]) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max6900_i2c_read_time(struct i2c_client *client, struct rtc_time *tm) | 
 | { | 
 | 	int rc; | 
 | 	u8 regs[MAX6900_REG_LEN]; | 
 |  | 
 | 	rc = max6900_i2c_read_regs(client, regs); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	tm->tm_sec = BCD2BIN(regs[MAX6900_REG_SC]); | 
 | 	tm->tm_min = BCD2BIN(regs[MAX6900_REG_MN]); | 
 | 	tm->tm_hour = BCD2BIN(regs[MAX6900_REG_HR] & 0x3f); | 
 | 	tm->tm_mday = BCD2BIN(regs[MAX6900_REG_DT]); | 
 | 	tm->tm_mon = BCD2BIN(regs[MAX6900_REG_MO]) - 1; | 
 | 	tm->tm_year = BCD2BIN(regs[MAX6900_REG_YR]) + | 
 | 		      BCD2BIN(regs[MAX6900_REG_CENTURY]) * 100 - 1900; | 
 | 	tm->tm_wday = BCD2BIN(regs[MAX6900_REG_DW]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max6900_i2c_clear_write_protect(struct i2c_client *client) | 
 | { | 
 | 	int rc; | 
 | 	rc = i2c_smbus_write_byte_data (client, MAX6900_REG_CONTROL_WRITE, 0); | 
 | 	if (rc < 0) { | 
 | 		dev_err(&client->dev, "%s: control register write failed\n", | 
 | 			__FUNCTION__); | 
 | 		return -EIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max6900_i2c_set_time(struct i2c_client *client, | 
 | 				struct rtc_time const *tm) | 
 | { | 
 | 	u8 regs[MAX6900_REG_LEN]; | 
 | 	int rc; | 
 |  | 
 | 	rc = max6900_i2c_clear_write_protect(client); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	regs[MAX6900_REG_SC] = BIN2BCD(tm->tm_sec); | 
 | 	regs[MAX6900_REG_MN] = BIN2BCD(tm->tm_min); | 
 | 	regs[MAX6900_REG_HR] = BIN2BCD(tm->tm_hour); | 
 | 	regs[MAX6900_REG_DT] = BIN2BCD(tm->tm_mday); | 
 | 	regs[MAX6900_REG_MO] = BIN2BCD(tm->tm_mon + 1); | 
 | 	regs[MAX6900_REG_DW] = BIN2BCD(tm->tm_wday); | 
 | 	regs[MAX6900_REG_YR] = BIN2BCD(tm->tm_year % 100); | 
 | 	regs[MAX6900_REG_CENTURY] = BIN2BCD((tm->tm_year + 1900) / 100); | 
 | 	/* set write protect */ | 
 | 	regs[MAX6900_REG_CT] = MAX6900_REG_CT_WP; | 
 |  | 
 | 	rc = max6900_i2c_write_regs(client, regs); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max6900_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
 | { | 
 | 	return max6900_i2c_read_time(to_i2c_client(dev), tm); | 
 | } | 
 |  | 
 | static int max6900_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
 | { | 
 | 	return max6900_i2c_set_time(to_i2c_client(dev), tm); | 
 | } | 
 |  | 
 | static int max6900_attach_adapter(struct i2c_adapter *adapter) | 
 | { | 
 | 	return i2c_probe(adapter, &addr_data, max6900_probe); | 
 | } | 
 |  | 
 | static int max6900_detach_client(struct i2c_client *client) | 
 | { | 
 | 	struct rtc_device *const rtc = i2c_get_clientdata(client); | 
 |  | 
 | 	if (rtc) | 
 | 		rtc_device_unregister(rtc); | 
 |  | 
 | 	return i2c_detach_client(client); | 
 | } | 
 |  | 
 | static struct i2c_driver max6900_driver = { | 
 | 	.driver		= { | 
 | 		.name	= DRV_NAME, | 
 | 	}, | 
 | 	.id		= I2C_DRIVERID_MAX6900, | 
 | 	.attach_adapter = max6900_attach_adapter, | 
 | 	.detach_client	= max6900_detach_client, | 
 | }; | 
 |  | 
 | static const struct rtc_class_ops max6900_rtc_ops = { | 
 | 	.read_time	= max6900_rtc_read_time, | 
 | 	.set_time	= max6900_rtc_set_time, | 
 | }; | 
 |  | 
 | static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind) | 
 | { | 
 | 	int rc = 0; | 
 | 	struct i2c_client *client = NULL; | 
 | 	struct rtc_device *rtc = NULL; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { | 
 | 		rc = -ENODEV; | 
 | 		goto failout; | 
 | 	} | 
 |  | 
 | 	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); | 
 | 	if (client == NULL) { | 
 | 		rc = -ENOMEM; | 
 | 		goto failout; | 
 | 	} | 
 |  | 
 | 	client->addr = addr; | 
 | 	client->adapter = adapter; | 
 | 	client->driver = &max6900_driver; | 
 | 	strlcpy(client->name, DRV_NAME, I2C_NAME_SIZE); | 
 |  | 
 | 	if (kind < 0) { | 
 | 		rc = max6900_i2c_validate_client(client); | 
 | 		if (rc < 0) | 
 | 			goto failout; | 
 | 	} | 
 |  | 
 | 	rc = i2c_attach_client(client); | 
 | 	if (rc < 0) | 
 | 		goto failout; | 
 |  | 
 | 	dev_info(&client->dev, | 
 | 		 "chip found, driver version " DRV_VERSION "\n"); | 
 |  | 
 | 	rtc = rtc_device_register(max6900_driver.driver.name, | 
 | 				  &client->dev, | 
 | 				  &max6900_rtc_ops, THIS_MODULE); | 
 | 	if (IS_ERR(rtc)) { | 
 | 		rc = PTR_ERR(rtc); | 
 | 		goto failout_detach; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, rtc); | 
 |  | 
 | 	return 0; | 
 |  | 
 | failout_detach: | 
 | 	i2c_detach_client(client); | 
 | failout: | 
 | 	kfree(client); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int __init max6900_init(void) | 
 | { | 
 | 	return i2c_add_driver(&max6900_driver); | 
 | } | 
 |  | 
 | static void __exit max6900_exit(void) | 
 | { | 
 | 	i2c_del_driver(&max6900_driver); | 
 | } | 
 |  | 
 | MODULE_DESCRIPTION("Maxim MAX6900 RTC driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_VERSION(DRV_VERSION); | 
 |  | 
 | module_init(max6900_init); | 
 | module_exit(max6900_exit); |