ARM: shmobile: Initial r8a73a4 SoC support V3
V3 of initial support for the r8a73a4 SoC including:
- Single Cortex-A15 CPU Core
- GIC
- Architecture timer
No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
new file mode 100644
index 0000000..15d479d
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -0,0 +1,91 @@
+/*
+ * r8a73a4 clock framework support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x270
+
+#define MPCKCR 0xe6150080
+
+static struct clk_mapping cpg_mapping = {
+ .phys = CPG_BASE,
+ .len = CPG_LEN,
+};
+
+static struct clk extalr_clk = {
+ .rate = 32768,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk extal1_clk = {
+ .rate = 26000000,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk extal2_clk = {
+ .rate = 48000000,
+ .mapping = &cpg_mapping,
+};
+
+static struct clk *main_clks[] = {
+ &extalr_clk,
+ &extal1_clk,
+ &extal2_clk,
+};
+
+enum { MSTP_NR };
+static struct clk mstp_clks[MSTP_NR] = {
+};
+
+static struct clk_lookup lookups[] = {
+};
+
+void __init r8a73a4_clock_init(void)
+{
+ void __iomem *cpg_base, *reg;
+ int k, ret = 0;
+
+ /* fix MPCLK to EXTAL2 for now.
+ * this is needed until more detailed clock topology is supported
+ */
+ cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN);
+ BUG_ON(!cpg_base);
+ reg = cpg_base + (MPCKCR - CPG_BASE);
+ iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */
+ iounmap(cpg_base);
+
+ for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+ ret = clk_register(main_clks[k]);
+
+ if (!ret)
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ if (!ret)
+ shmobile_clk_init();
+ else
+ panic("failed to setup r8a73a4 clocks\n");
+}