ARM i.MX51: Full iomux support
This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 125a196..f8652ef 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -121,15 +121,15 @@
MX51_PAD_UART1_CTS__UART1_CTS,
/* I2C2 */
- MX51_PAD_GPIO_1_2__I2C2_SCL,
- MX51_PAD_GPIO_1_3__I2C2_SDA,
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_GPIO1_2__I2C2_SCL,
+ MX51_PAD_GPIO1_3__I2C2_SDA,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* QUART IRQ */
- MX51_PAD_NANDF_D15__GPIO_3_25,
- MX51_PAD_NANDF_D14__GPIO_3_26,
- MX51_PAD_NANDF_D13__GPIO_3_27,
- MX51_PAD_NANDF_D12__GPIO_3_28,
+ MX51_PAD_NANDF_D15__GPIO3_25,
+ MX51_PAD_NANDF_D14__GPIO3_26,
+ MX51_PAD_NANDF_D13__GPIO3_27,
+ MX51_PAD_NANDF_D12__GPIO3_28,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 7e8fb82..ad93189 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -65,9 +65,6 @@
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
-#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
- MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -88,30 +85,33 @@
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */
+ MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
/* FEC */
- MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */
+ MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
/* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO_4_16,
- MX51_PAD_I2C1_DAT__GPIO_4_17,
+ MX51_PAD_I2C1_CLK__GPIO4_16,
+ MX51_PAD_I2C1_DAT__GPIO4_17,
/* CAN */
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */
- MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */
- MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */
- MX51_PAD_GPIO_1_6__GPIO_1_6,
- MX51_PAD_GPIO_1_7__GPIO_1_7,
- MX51_PAD_GPIO_1_8__GPIO_1_8,
- MX51_PAD_GPIO_1_9__GPIO_1_9,
+ MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
+ MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
+ MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
+ MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
+ MX51_PAD_GPIO1_6__GPIO1_6,
+ MX51_PAD_GPIO1_7__GPIO1_7,
+ MX51_PAD_GPIO1_8__GPIO1_8,
+ MX51_PAD_GPIO1_9__GPIO1_9,
/* Touchscreen */
- CPUIMX51SD_GPIO_3_12, /* IRQ */
+ /* IRQ */
+ _MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
static const struct imxuart_platform_data uart_pdata __initconst = {
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 6cc2805..e42bd2e 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -50,7 +50,7 @@
MX51_PAD_EIM_D27__UART3_RTS,
/* CPLD PARENT IRQ PIN */
- MX51_PAD_GPIO_1_6__GPIO_1_6,
+ MX51_PAD_GPIO1_6__GPIO1_6,
/* KPP */
MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -68,7 +68,7 @@
MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
MX51_PAD_NANDF_RB3__ECSPI2_MISO,
MX51_PAD_NANDF_D15__ECSPI2_MOSI,
- MX51_PAD_NANDF_D12__GPIO_3_28,
+ MX51_PAD_NANDF_D12__GPIO3_28,
};
/* Serial ports */
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 24e335c..1d231e8 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -95,8 +95,8 @@
MX51_PAD_KEY_COL5__I2C2_SDA,
/* HSI2C */
- MX51_PAD_I2C1_CLK__HSI2C_CLK,
- MX51_PAD_I2C1_DAT__HSI2C_DAT,
+ MX51_PAD_I2C1_CLK__I2C1_CLK,
+ MX51_PAD_I2C1_DAT__I2C1_DAT,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -112,29 +112,29 @@
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
/* USB HUB reset line*/
- MX51_PAD_GPIO_1_7__GPIO_1_7,
+ MX51_PAD_GPIO1_7__GPIO1_7,
/* FEC */
MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDAT1,
- MX51_PAD_EIM_CS2__FEC_RDAT2,
- MX51_PAD_EIM_CS3__FEC_RDAT3,
+ MX51_PAD_EIM_EB3__FEC_RDATA1,
+ MX51_PAD_EIM_CS2__FEC_RDATA2,
+ MX51_PAD_EIM_CS3__FEC_RDATA3,
MX51_PAD_EIM_CS4__FEC_RX_ER,
MX51_PAD_EIM_CS5__FEC_CRS,
MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RXCLK,
- MX51_PAD_NANDF_RB6__FEC_RDAT0,
- MX51_PAD_NANDF_RB7__FEC_TDAT0,
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+ MX51_PAD_NANDF_D9__FEC_RDATA0,
+ MX51_PAD_NANDF_D8__FEC_TDATA0,
MX51_PAD_NANDF_CS2__FEC_TX_ER,
MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDAT1,
- MX51_PAD_NANDF_CS5__FEC_TDAT2,
- MX51_PAD_NANDF_CS6__FEC_TDAT3,
+ MX51_PAD_NANDF_CS4__FEC_TDATA1,
+ MX51_PAD_NANDF_CS5__FEC_TDATA2,
+ MX51_PAD_NANDF_CS6__FEC_TDATA3,
MX51_PAD_NANDF_CS7__FEC_TX_EN,
MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
/* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO_2_14,
+ MX51_PAD_EIM_A20__GPIO2_14,
/* SD 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
@@ -156,8 +156,8 @@
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO_4_24,
- MX51_PAD_CSPI1_SS1__GPIO_4_25,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
};
/* Serial ports */
@@ -188,8 +188,8 @@
static int gpio_usbh1_active(void)
{
- iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
- iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+ iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+ iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
@@ -352,8 +352,8 @@
static void __init mxc_board_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = (MX51_PAD_EIM_A27__GPIO_2_21 &
- ~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2;
+ iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+ MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 94e7818..b7946f8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -94,15 +94,15 @@
MX51_PAD_SD2_DATA3__SD2_DATA3,
/* SD/MMC WP/CD */
- MX51_PAD_GPIO_1_0__ESDHC1_CD,
- MX51_PAD_GPIO_1_1__ESDHC1_WP,
- MX51_PAD_GPIO_1_7__ESDHC2_WP,
- MX51_PAD_GPIO_1_8__ESDHC2_CD,
+ MX51_PAD_GPIO1_0__SD1_CD,
+ MX51_PAD_GPIO1_1__SD1_WP,
+ MX51_PAD_GPIO1_7__SD2_WP,
+ MX51_PAD_GPIO1_8__SD2_CD,
/* leds */
- MX51_PAD_CSI1_D9__GPIO_3_13,
- MX51_PAD_CSI1_VSYNC__GPIO_3_14,
- MX51_PAD_CSI1_HSYNC__GPIO_3_15,
+ MX51_PAD_CSI1_D9__GPIO3_13,
+ MX51_PAD_CSI1_VSYNC__GPIO3_14,
+ MX51_PAD_CSI1_HSYNC__GPIO3_15,
/* power key */
MX51_PAD_PWRKEY,
@@ -110,14 +110,14 @@
/* spi */
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SS0__GPIO_4_24,
- MX51_PAD_CSPI1_SS1__GPIO_4_25,
+ MX51_PAD_CSPI1_SS0__GPIO4_24,
+ MX51_PAD_CSPI1_SS1__GPIO4_25,
MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
/* reset */
- MX51_PAD_DI1_PIN13__GPIO_3_2,
- MX51_PAD_GPIO_1_4__GPIO_1_4,
+ MX51_PAD_DI1_PIN13__GPIO3_2,
+ MX51_PAD_GPIO1_4__GPIO1_4,
};
/* Serial ports */
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 94c293f..c96d018 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -96,13 +96,13 @@
MX51_PAD_KEY_COL5__UART3_CTS,
/* TSC2007 IRQ */
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* LEDS */
- MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
- MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
- MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
- MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+ MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+ MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+ MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+ MX51_PAD_DISPB2_SER_RS__GPIO3_8,
/* KPP */
MX51_PAD_KEY_ROW0__KEY_ROW0,
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c6c2320..c372a43 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -45,14 +45,13 @@
#include "devices-imx51.h"
#include "devices.h"
-#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
- MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LED */
- MX51_PAD_NANDF_D10__GPIO_3_30,
+ MX51_PAD_NANDF_D10__GPIO3_30,
/* SWITCH */
- MBIMXSD_GPIO_3_31,
+ _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
MX51_PAD_UART2_TXD__UART2_TXD,