| /* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike) | 
 |    Ethernet cards on Linux */ | 
 | /* Based on the former daynaport.c driver, by Alan Cox.  Some code | 
 |    taken from or inspired by skeleton.c by Donald Becker, acenic.c by | 
 |    Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker. | 
 |  | 
 |    This software may be used and distributed according to the terms of | 
 |    the GNU Public License, incorporated herein by reference.  */ | 
 |  | 
 | /* 2000-02-28: support added for Dayna and Kinetics cards by | 
 |    A.G.deWijn@phys.uu.nl */ | 
 | /* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */ | 
 | /* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */ | 
 | /* 2001-05-15: support for Cabletron ported from old daynaport driver | 
 |  * and fixed access to Sonic Sys card which masquerades as a Farallon | 
 |  * by rayk@knightsmanor.org */ | 
 | /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */ | 
 | /* 2003-12-26: Make sure Asante cards always work. */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/types.h> | 
 | #include <linux/fcntl.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/nubus.h> | 
 | #include <linux/in.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/string.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/init.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include <asm/system.h> | 
 | #include <asm/io.h> | 
 | #include <asm/dma.h> | 
 | #include <asm/hwtest.h> | 
 | #include <asm/macints.h> | 
 |  | 
 | static char version[] = | 
 | 	"mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; | 
 |  | 
 | #define EI_SHIFT(x)	(ei_local->reg_offset[x]) | 
 | #define ei_inb(port)   in_8(port) | 
 | #define ei_outb(val,port)  out_8(port,val) | 
 | #define ei_inb_p(port)   in_8(port) | 
 | #define ei_outb_p(val,port)  out_8(port,val) | 
 |  | 
 | #include "lib8390.c" | 
 |  | 
 | #define WD_START_PG			0x00	/* First page of TX buffer */ | 
 | #define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */ | 
 | #define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */ | 
 | #define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG  /* First page of TX buffer */ | 
 |  | 
 | /* Unfortunately it seems we have to hardcode these for the moment */ | 
 | /* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */ | 
 |  | 
 | #define DAYNA_8390_BASE		0x80000 | 
 | #define DAYNA_8390_MEM		0x00000 | 
 |  | 
 | #define CABLETRON_8390_BASE	0x90000 | 
 | #define CABLETRON_8390_MEM	0x00000 | 
 |  | 
 | #define INTERLAN_8390_BASE	0xE0000 | 
 | #define INTERLAN_8390_MEM	0xD0000 | 
 |  | 
 | enum mac8390_type { | 
 | 	MAC8390_NONE = -1, | 
 | 	MAC8390_APPLE, | 
 | 	MAC8390_ASANTE, | 
 | 	MAC8390_FARALLON, | 
 | 	MAC8390_CABLETRON, | 
 | 	MAC8390_DAYNA, | 
 | 	MAC8390_INTERLAN, | 
 | 	MAC8390_KINETICS, | 
 | }; | 
 |  | 
 | static const char * cardname[] = { | 
 | 	"apple", | 
 | 	"asante", | 
 | 	"farallon", | 
 | 	"cabletron", | 
 | 	"dayna", | 
 | 	"interlan", | 
 | 	"kinetics", | 
 | }; | 
 |  | 
 | static int word16[] = { | 
 | 	1, /* apple */ | 
 | 	1, /* asante */ | 
 | 	1, /* farallon */ | 
 | 	1, /* cabletron */ | 
 | 	0, /* dayna */ | 
 | 	1, /* interlan */ | 
 | 	0, /* kinetics */ | 
 | }; | 
 |  | 
 | /* on which cards do we use NuBus resources? */ | 
 | static int useresources[] = { | 
 | 	1, /* apple */ | 
 | 	1, /* asante */ | 
 | 	1, /* farallon */ | 
 | 	0, /* cabletron */ | 
 | 	0, /* dayna */ | 
 | 	0, /* interlan */ | 
 | 	0, /* kinetics */ | 
 | }; | 
 |  | 
 | enum mac8390_access { | 
 | 	ACCESS_UNKNOWN = 0, | 
 | 	ACCESS_32, | 
 | 	ACCESS_16, | 
 | }; | 
 |  | 
 | extern int mac8390_memtest(struct net_device * dev); | 
 | static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, | 
 | 			   enum mac8390_type type); | 
 |  | 
 | static int mac8390_open(struct net_device * dev); | 
 | static int mac8390_close(struct net_device * dev); | 
 | static void mac8390_no_reset(struct net_device *dev); | 
 | static void interlan_reset(struct net_device *dev); | 
 |  | 
 | /* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/ | 
 | static void sane_get_8390_hdr(struct net_device *dev, | 
 | 			      struct e8390_pkt_hdr *hdr, int ring_page); | 
 | static void sane_block_input(struct net_device * dev, int count, | 
 | 			     struct sk_buff * skb, int ring_offset); | 
 | static void sane_block_output(struct net_device * dev, int count, | 
 | 			      const unsigned char * buf, const int start_page); | 
 |  | 
 | /* dayna_memcpy to and from card */ | 
 | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, | 
 | 				int from, int count); | 
 | static void dayna_memcpy_tocard(struct net_device *dev, int to, | 
 | 			      const void *from, int count); | 
 |  | 
 | /* Dayna - Dayna/Kinetics use this */ | 
 | static void dayna_get_8390_hdr(struct net_device *dev, | 
 | 			       struct e8390_pkt_hdr *hdr, int ring_page); | 
 | static void dayna_block_input(struct net_device *dev, int count, | 
 | 			      struct sk_buff *skb, int ring_offset); | 
 | static void dayna_block_output(struct net_device *dev, int count, | 
 | 			       const unsigned char *buf, int start_page); | 
 |  | 
 | #define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c)) | 
 | #define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c)) | 
 |  | 
 | /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */ | 
 | static void slow_sane_get_8390_hdr(struct net_device *dev, | 
 | 				   struct e8390_pkt_hdr *hdr, int ring_page); | 
 | static void slow_sane_block_input(struct net_device *dev, int count, | 
 | 				  struct sk_buff *skb, int ring_offset); | 
 | static void slow_sane_block_output(struct net_device *dev, int count, | 
 | 				   const unsigned char *buf, int start_page); | 
 | static void word_memcpy_tocard(void *tp, const void *fp, int count); | 
 | static void word_memcpy_fromcard(void *tp, const void *fp, int count); | 
 |  | 
 | static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) | 
 | { | 
 | 	switch (dev->dr_sw) { | 
 | 		case NUBUS_DRSW_3COM: | 
 | 			switch (dev->dr_hw) { | 
 | 				case NUBUS_DRHW_APPLE_SONIC_NB: | 
 | 				case NUBUS_DRHW_APPLE_SONIC_LC: | 
 | 				case NUBUS_DRHW_SONNET: | 
 | 					return MAC8390_NONE; | 
 | 					break; | 
 | 				default: | 
 | 					return MAC8390_APPLE; | 
 | 					break; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_APPLE: | 
 | 			switch (dev->dr_hw) { | 
 | 				case NUBUS_DRHW_ASANTE_LC: | 
 | 					return MAC8390_NONE; | 
 | 					break; | 
 | 				case NUBUS_DRHW_CABLETRON: | 
 | 					return MAC8390_CABLETRON; | 
 | 					break; | 
 | 				default: | 
 | 					return MAC8390_APPLE; | 
 | 					break; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_ASANTE: | 
 | 			return MAC8390_ASANTE; | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_TECHWORKS: | 
 | 		case NUBUS_DRSW_DAYNA2: | 
 | 		case NUBUS_DRSW_DAYNA_LC: | 
 | 			if (dev->dr_hw == NUBUS_DRHW_CABLETRON) | 
 | 				return MAC8390_CABLETRON; | 
 | 			else | 
 | 				return MAC8390_APPLE; | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_FARALLON: | 
 | 			return MAC8390_FARALLON; | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_KINETICS: | 
 | 			switch (dev->dr_hw) { | 
 | 				case NUBUS_DRHW_INTERLAN: | 
 | 					return MAC8390_INTERLAN; | 
 | 					break; | 
 | 				default: | 
 | 					return MAC8390_KINETICS; | 
 | 					break; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case NUBUS_DRSW_DAYNA: | 
 | 			// These correspond to Dayna Sonic cards | 
 | 			// which use the macsonic driver | 
 | 			if (dev->dr_hw == NUBUS_DRHW_SMC9194 || | 
 | 				dev->dr_hw == NUBUS_DRHW_INTERLAN ) | 
 | 				return MAC8390_NONE; | 
 | 			else | 
 | 				return MAC8390_DAYNA; | 
 | 			break; | 
 | 	} | 
 | 	return MAC8390_NONE; | 
 | } | 
 |  | 
 | static enum mac8390_access __init mac8390_testio(volatile unsigned long membase) | 
 | { | 
 | 	unsigned long outdata = 0xA5A0B5B0; | 
 | 	unsigned long indata =  0x00000000; | 
 | 	/* Try writing 32 bits */ | 
 | 	memcpy((char *)membase, (char *)&outdata, 4); | 
 | 	/* Now compare them */ | 
 | 	if (memcmp((char *)&outdata, (char *)membase, 4) == 0) | 
 | 		return ACCESS_32; | 
 | 	/* Write 16 bit output */ | 
 | 	word_memcpy_tocard((char *)membase, (char *)&outdata, 4); | 
 | 	/* Now read it back */ | 
 | 	word_memcpy_fromcard((char *)&indata, (char *)membase, 4); | 
 | 	if (outdata == indata) | 
 | 		return ACCESS_16; | 
 | 	return ACCESS_UNKNOWN; | 
 | } | 
 |  | 
 | static int __init mac8390_memsize(unsigned long membase) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int i, j; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	/* Check up to 32K in 4K increments */ | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000)); | 
 |  | 
 | 		/* Unwriteable - we have a fully decoded card and the | 
 | 		   RAM end located */ | 
 | 		if (hwreg_present(m) == 0) | 
 | 			break; | 
 |  | 
 | 		/* write a distinctive byte */ | 
 | 		*m = 0xA5A0 | i; | 
 | 		/* check that we read back what we wrote */ | 
 | 		if (*m != (0xA5A0 | i)) | 
 | 			break; | 
 |  | 
 | 		/* check for partial decode and wrap */ | 
 | 		for (j = 0; j < i; j++) { | 
 | 			volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000)); | 
 | 			if (*p != (0xA5A0 | j)) | 
 | 				break; | 
 |  		} | 
 |  	} | 
 | 	local_irq_restore(flags); | 
 | 	/* in any case, we stopped once we tried one block too many, | 
 |            or once we reached 32K */ | 
 |  	return i * 0x1000; | 
 | } | 
 |  | 
 | struct net_device * __init mac8390_probe(int unit) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	volatile unsigned short *i; | 
 | 	int version_disp = 0; | 
 | 	struct nubus_dev * ndev = NULL; | 
 | 	int err = -ENODEV; | 
 |  | 
 | 	struct nubus_dir dir; | 
 | 	struct nubus_dirent ent; | 
 | 	int offset; | 
 | 	static unsigned int slots; | 
 |  | 
 | 	enum mac8390_type cardtype; | 
 |  | 
 | 	/* probably should check for Nubus instead */ | 
 |  | 
 | 	if (!MACH_IS_MAC) | 
 | 		return ERR_PTR(-ENODEV); | 
 |  | 
 | 	dev = ____alloc_ei_netdev(0); | 
 | 	if (!dev) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	if (unit >= 0) | 
 | 		sprintf(dev->name, "eth%d", unit); | 
 |  | 
 | 	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) { | 
 | 		/* Have we seen it already? */ | 
 | 		if (slots & (1<<ndev->board->slot)) | 
 | 			continue; | 
 | 		slots |= 1<<ndev->board->slot; | 
 |  | 
 | 		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE) | 
 | 			continue; | 
 |  | 
 | 		if (version_disp == 0) { | 
 | 			version_disp = 1; | 
 | 			printk(version); | 
 | 		} | 
 |  | 
 | 		dev->irq = SLOT2IRQ(ndev->board->slot); | 
 | 		/* This is getting to be a habit */ | 
 | 		dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20); | 
 |  | 
 | 		/* Get some Nubus info - we will trust the card's idea | 
 | 		   of where its memory and registers are. */ | 
 |  | 
 | 		if (nubus_get_func_dir(ndev, &dir) == -1) { | 
 | 			printk(KERN_ERR "%s: Unable to get Nubus functional" | 
 | 					" directory for slot %X!\n", | 
 | 			       dev->name, ndev->board->slot); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Get the MAC address */ | 
 | 		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) { | 
 | 			printk(KERN_INFO "%s: Couldn't get MAC address!\n", | 
 | 					dev->name); | 
 | 			continue; | 
 | 		} else { | 
 | 			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6); | 
 | 		} | 
 |  | 
 | 		if (useresources[cardtype] == 1) { | 
 | 			nubus_rewinddir(&dir); | 
 | 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) { | 
 | 				printk(KERN_ERR "%s: Memory offset resource" | 
 | 						" for slot %X not found!\n", | 
 | 				       dev->name, ndev->board->slot); | 
 | 				continue; | 
 | 			} | 
 | 			nubus_get_rsrc_mem(&offset, &ent, 4); | 
 | 			dev->mem_start = dev->base_addr + offset; | 
 | 			/* yes, this is how the Apple driver does it */ | 
 | 			dev->base_addr = dev->mem_start + 0x10000; | 
 | 			nubus_rewinddir(&dir); | 
 | 			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) { | 
 | 				printk(KERN_INFO "%s: Memory length resource" | 
 | 						 " for slot %X not found" | 
 | 						 ", probing\n", | 
 | 				       dev->name, ndev->board->slot); | 
 | 				offset = mac8390_memsize(dev->mem_start); | 
 | 				} else { | 
 | 					nubus_get_rsrc_mem(&offset, &ent, 4); | 
 | 				} | 
 | 			dev->mem_end = dev->mem_start + offset; | 
 | 		} else { | 
 | 			switch (cardtype) { | 
 | 				case MAC8390_KINETICS: | 
 | 				case MAC8390_DAYNA: /* it's the same */ | 
 | 					dev->base_addr = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						DAYNA_8390_BASE); | 
 | 					dev->mem_start = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						DAYNA_8390_MEM); | 
 | 					dev->mem_end = | 
 | 						dev->mem_start + | 
 | 						mac8390_memsize(dev->mem_start); | 
 | 					break; | 
 | 				case MAC8390_INTERLAN: | 
 | 					dev->base_addr = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						INTERLAN_8390_BASE); | 
 | 					dev->mem_start = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						INTERLAN_8390_MEM); | 
 | 					dev->mem_end = | 
 | 						dev->mem_start + | 
 | 						mac8390_memsize(dev->mem_start); | 
 | 					break; | 
 | 				case MAC8390_CABLETRON: | 
 | 					dev->base_addr = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						CABLETRON_8390_BASE); | 
 | 					dev->mem_start = | 
 | 						(int)(ndev->board->slot_addr + | 
 | 						CABLETRON_8390_MEM); | 
 | 					/* The base address is unreadable if 0x00 | 
 | 					 * has been written to the command register | 
 | 					 * Reset the chip by writing E8390_NODMA + | 
 | 					 *   E8390_PAGE0 + E8390_STOP just to be | 
 | 					 *   sure | 
 | 					 */ | 
 | 					i = (void *)dev->base_addr; | 
 | 					*i = 0x21; | 
 | 					dev->mem_end = | 
 | 						dev->mem_start + | 
 | 						mac8390_memsize(dev->mem_start); | 
 | 					break; | 
 |  | 
 | 				default: | 
 | 					printk(KERN_ERR "Card type %s is" | 
 | 					       " unsupported, sorry\n", | 
 | 					       ndev->board->name); | 
 | 					continue; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Do the nasty 8390 stuff */ | 
 | 		if (!mac8390_initdev(dev, ndev, cardtype)) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (!ndev) | 
 | 		goto out; | 
 | 	err = register_netdev(dev); | 
 | 	if (err) | 
 | 		goto out; | 
 | 	return dev; | 
 |  | 
 | out: | 
 | 	free_netdev(dev); | 
 | 	return ERR_PTR(err); | 
 | } | 
 |  | 
 | #ifdef MODULE | 
 | MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others"); | 
 | MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* overkill, of course */ | 
 | static struct net_device *dev_mac8390[15]; | 
 | int init_module(void) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < 15; i++) { | 
 | 		struct net_device *dev = mac8390_probe(-1); | 
 | 		if (IS_ERR(dev)) | 
 | 			break; | 
 | 		dev_mac890[i] = dev; | 
 | 	} | 
 | 	if (!i) { | 
 | 		printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void cleanup_module(void) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < 15; i++) { | 
 | 		struct net_device *dev = dev_mac890[i]; | 
 | 		if (dev) { | 
 | 			unregister_netdev(dev); | 
 | 			free_netdev(dev); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | #endif /* MODULE */ | 
 |  | 
 | static const struct net_device_ops mac8390_netdev_ops = { | 
 | 	.ndo_open 		= mac8390_open, | 
 | 	.ndo_stop		= mac8390_close, | 
 | 	.ndo_start_xmit		= __ei_start_xmit, | 
 | 	.ndo_tx_timeout		= __ei_tx_timeout, | 
 | 	.ndo_get_stats		= __ei_get_stats, | 
 | 	.ndo_set_multicast_list = __ei_set_multicast_list, | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | 	.ndo_set_mac_address 	= eth_mac_addr, | 
 | 	.ndo_change_mtu		= eth_change_mtu, | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	.ndo_poll_controller	= __ei_poll, | 
 | #endif | 
 | }; | 
 |  | 
 | static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, | 
 | 			    enum mac8390_type type) | 
 | { | 
 | 	static u32 fwrd4_offsets[16]={ | 
 | 		0,      4,      8,      12, | 
 | 		16,     20,     24,     28, | 
 | 		32,     36,     40,     44, | 
 | 		48,     52,     56,     60 | 
 | 	}; | 
 | 	static u32 back4_offsets[16]={ | 
 | 		60,     56,     52,     48, | 
 | 		44,     40,     36,     32, | 
 | 		28,     24,     20,     16, | 
 | 		12,     8,      4,      0 | 
 | 	}; | 
 | 	static u32 fwrd2_offsets[16]={ | 
 | 		0,      2,      4,      6, | 
 | 		8,     10,     12,     14, | 
 | 		16,    18,     20,     22, | 
 | 		24,    26,     28,     30 | 
 | 	}; | 
 |  | 
 | 	int access_bitmode = 0; | 
 |  | 
 | 	/* Now fill in our stuff */ | 
 | 	dev->netdev_ops = &mac8390_netdev_ops; | 
 |  | 
 | 	/* GAR, ei_status is actually a macro even though it looks global */ | 
 | 	ei_status.name = cardname[type]; | 
 | 	ei_status.word16 = word16[type]; | 
 |  | 
 | 	/* Cabletron's TX/RX buffers are backwards */ | 
 | 	if (type == MAC8390_CABLETRON) { | 
 |                ei_status.tx_start_page = CABLETRON_TX_START_PG; | 
 |                ei_status.rx_start_page = CABLETRON_RX_START_PG; | 
 |                ei_status.stop_page = CABLETRON_RX_STOP_PG; | 
 |                ei_status.rmem_start = dev->mem_start; | 
 |                ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256; | 
 | 	} else { | 
 |                ei_status.tx_start_page = WD_START_PG; | 
 |                ei_status.rx_start_page = WD_START_PG + TX_PAGES; | 
 |                ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; | 
 |                ei_status.rmem_start = dev->mem_start + TX_PAGES*256; | 
 |                ei_status.rmem_end = dev->mem_end; | 
 | 	} | 
 |  | 
 | 	/* Fill in model-specific information and functions */ | 
 | 	switch(type) { | 
 | 	case MAC8390_FARALLON: | 
 | 	case MAC8390_APPLE: | 
 | 		switch(mac8390_testio(dev->mem_start)) { | 
 | 			case ACCESS_UNKNOWN: | 
 | 				printk("Don't know how to access card memory!\n"); | 
 | 				return -ENODEV; | 
 | 				break; | 
 |  | 
 | 			case ACCESS_16: | 
 | 				/* 16 bit card, register map is reversed */ | 
 | 				ei_status.reset_8390 = &mac8390_no_reset; | 
 | 				ei_status.block_input = &slow_sane_block_input; | 
 | 				ei_status.block_output = &slow_sane_block_output; | 
 | 				ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
 | 				ei_status.reg_offset = back4_offsets; | 
 | 				break; | 
 |  | 
 | 			case ACCESS_32: | 
 | 				/* 32 bit card, register map is reversed */ | 
 | 				ei_status.reset_8390 = &mac8390_no_reset; | 
 | 				ei_status.block_input = &sane_block_input; | 
 | 				ei_status.block_output = &sane_block_output; | 
 | 				ei_status.get_8390_hdr = &sane_get_8390_hdr; | 
 | 				ei_status.reg_offset = back4_offsets; | 
 | 				access_bitmode = 1; | 
 | 				break; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case MAC8390_ASANTE: | 
 | 		/* Some Asante cards pass the 32 bit test | 
 | 		 * but overwrite system memory when run at 32 bit. | 
 | 		 * so we run them all at 16 bit. | 
 | 		 */ | 
 | 		ei_status.reset_8390 = &mac8390_no_reset; | 
 | 		ei_status.block_input = &slow_sane_block_input; | 
 | 		ei_status.block_output = &slow_sane_block_output; | 
 | 		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
 | 		ei_status.reg_offset = back4_offsets; | 
 | 		break; | 
 |  | 
 | 	case MAC8390_CABLETRON: | 
 | 		/* 16 bit card, register map is short forward */ | 
 | 		ei_status.reset_8390 = &mac8390_no_reset; | 
 | 		ei_status.block_input = &slow_sane_block_input; | 
 | 		ei_status.block_output = &slow_sane_block_output; | 
 | 		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
 | 		ei_status.reg_offset = fwrd2_offsets; | 
 | 		break; | 
 |  | 
 | 	case MAC8390_DAYNA: | 
 | 	case MAC8390_KINETICS: | 
 | 		/* 16 bit memory, register map is forward */ | 
 | 		/* dayna and similar */ | 
 | 		ei_status.reset_8390 = &mac8390_no_reset; | 
 | 		ei_status.block_input = &dayna_block_input; | 
 | 		ei_status.block_output = &dayna_block_output; | 
 | 		ei_status.get_8390_hdr = &dayna_get_8390_hdr; | 
 | 		ei_status.reg_offset = fwrd4_offsets; | 
 | 		break; | 
 |  | 
 | 	case MAC8390_INTERLAN: | 
 | 		/* 16 bit memory, register map is forward */ | 
 | 		ei_status.reset_8390 = &interlan_reset; | 
 | 		ei_status.block_input = &slow_sane_block_input; | 
 | 		ei_status.block_output = &slow_sane_block_output; | 
 | 		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; | 
 | 	        ei_status.reg_offset = fwrd4_offsets; | 
 | 	        break; | 
 |  | 
 | 	default: | 
 | 		printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	__NS8390_init(dev, 0); | 
 |  | 
 | 	/* Good, done, now spit out some messages */ | 
 | 	printk(KERN_INFO "%s: %s in slot %X (type %s)\n", | 
 | 	       dev->name, ndev->board->name, ndev->board->slot, cardname[type]); | 
 | 	printk(KERN_INFO | 
 | 	       "MAC %pM IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n", | 
 | 	       dev->dev_addr, dev->irq, | 
 | 	       (unsigned int)(dev->mem_end - dev->mem_start) >> 10, | 
 | 	       dev->mem_start, access_bitmode ? 32 : 16); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mac8390_open(struct net_device *dev) | 
 | { | 
 | 	__ei_open(dev); | 
 | 	if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) { | 
 | 		printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); | 
 | 		return -EAGAIN; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mac8390_close(struct net_device *dev) | 
 | { | 
 | 	free_irq(dev->irq, dev); | 
 | 	__ei_close(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mac8390_no_reset(struct net_device *dev) | 
 | { | 
 | 	ei_status.txing = 0; | 
 | 	if (ei_debug > 1) | 
 | 		printk("reset not supported\n"); | 
 | 	return; | 
 | } | 
 |  | 
 | static void interlan_reset(struct net_device *dev) | 
 | { | 
 | 	unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq)); | 
 | 	if (ei_debug > 1) | 
 | 		printk("Need to reset the NS8390 t=%lu...", jiffies); | 
 | 	ei_status.txing = 0; | 
 | 	target[0xC0000] = 0; | 
 | 	if (ei_debug > 1) | 
 | 		printk("reset complete\n"); | 
 | 	return; | 
 | } | 
 |  | 
 | /* dayna_memcpy_fromio/dayna_memcpy_toio */ | 
 | /* directly from daynaport.c by Alan Cox */ | 
 | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count) | 
 | { | 
 | 	volatile unsigned char *ptr; | 
 | 	unsigned char *target=to; | 
 | 	from<<=1;	/* word, skip overhead */ | 
 | 	ptr=(unsigned char *)(dev->mem_start+from); | 
 | 	/* Leading byte? */ | 
 | 	if (from&2) { | 
 | 		*target++ = ptr[-1]; | 
 | 		ptr += 2; | 
 | 		count--; | 
 | 	} | 
 | 	while(count>=2) | 
 | 	{ | 
 | 		*(unsigned short *)target = *(unsigned short volatile *)ptr; | 
 | 		ptr += 4;			/* skip cruft */ | 
 | 		target += 2; | 
 | 		count-=2; | 
 | 	} | 
 | 	/* Trailing byte? */ | 
 | 	if(count) | 
 | 		*target = *ptr; | 
 | } | 
 |  | 
 | static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count) | 
 | { | 
 | 	volatile unsigned short *ptr; | 
 | 	const unsigned char *src=from; | 
 | 	to<<=1;	/* word, skip overhead */ | 
 | 	ptr=(unsigned short *)(dev->mem_start+to); | 
 | 	/* Leading byte? */ | 
 | 	if (to&2) { /* avoid a byte write (stomps on other data) */ | 
 | 		ptr[-1] = (ptr[-1]&0xFF00)|*src++; | 
 | 		ptr++; | 
 | 		count--; | 
 | 	} | 
 | 	while(count>=2) | 
 | 	{ | 
 | 		*ptr++=*(unsigned short *)src;		/* Copy and */ | 
 | 		ptr++;			/* skip cruft */ | 
 | 		src += 2; | 
 | 		count-=2; | 
 | 	} | 
 | 	/* Trailing byte? */ | 
 | 	if(count) | 
 | 	{ | 
 | 		/* card doesn't like byte writes */ | 
 | 		*ptr=(*ptr&0x00FF)|(*src << 8); | 
 | 	} | 
 | } | 
 |  | 
 | /* sane block input/output */ | 
 | static void sane_get_8390_hdr(struct net_device *dev, | 
 | 			      struct e8390_pkt_hdr *hdr, int ring_page) | 
 | { | 
 | 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
 | 	memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4); | 
 | 	/* Fix endianness */ | 
 | 	hdr->count = swab16(hdr->count); | 
 | } | 
 |  | 
 | static void sane_block_input(struct net_device *dev, int count, | 
 | 			     struct sk_buff *skb, int ring_offset) | 
 | { | 
 | 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
 | 	unsigned long xfer_start = xfer_base + dev->mem_start; | 
 |  | 
 | 	if (xfer_start + count > ei_status.rmem_end) { | 
 | 		/* We must wrap the input move. */ | 
 | 		int semi_count = ei_status.rmem_end - xfer_start; | 
 | 		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count); | 
 | 		count -= semi_count; | 
 | 		memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count); | 
 | 	} else { | 
 | 		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count); | 
 | 	} | 
 | } | 
 |  | 
 | static void sane_block_output(struct net_device *dev, int count, | 
 | 			      const unsigned char *buf, int start_page) | 
 | { | 
 | 	long shmem = (start_page - WD_START_PG)<<8; | 
 |  | 
 | 	memcpy_toio((char *)dev->mem_start + shmem, buf, count); | 
 | } | 
 |  | 
 | /* dayna block input/output */ | 
 | static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) | 
 | { | 
 | 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
 |  | 
 | 	dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4); | 
 | 	/* Fix endianness */ | 
 | 	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8); | 
 | } | 
 |  | 
 | static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) | 
 | { | 
 | 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
 | 	unsigned long xfer_start = xfer_base+dev->mem_start; | 
 |  | 
 | 	/* Note the offset math is done in card memory space which is word | 
 | 	   per long onto our space. */ | 
 |  | 
 | 	if (xfer_start + count > ei_status.rmem_end) | 
 | 	{ | 
 | 		/* We must wrap the input move. */ | 
 | 		int semi_count = ei_status.rmem_end - xfer_start; | 
 | 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count); | 
 | 		count -= semi_count; | 
 | 		dayna_memcpy_fromcard(dev, skb->data + semi_count, | 
 | 				      ei_status.rmem_start - dev->mem_start, | 
 | 				      count); | 
 | 	} | 
 | 	else | 
 | 	{ | 
 | 		dayna_memcpy_fromcard(dev, skb->data, xfer_base, count); | 
 | 	} | 
 | } | 
 |  | 
 | static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf, | 
 | 				int start_page) | 
 | { | 
 | 	long shmem = (start_page - WD_START_PG)<<8; | 
 |  | 
 | 	dayna_memcpy_tocard(dev, shmem, buf, count); | 
 | } | 
 |  | 
 | /* Cabletron block I/O */ | 
 | static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, | 
 | 	int ring_page) | 
 | { | 
 | 	unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
 | 	word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4); | 
 | 	/* Register endianism - fix here rather than 8390.c */ | 
 | 	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8); | 
 | } | 
 |  | 
 | static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb, | 
 | 	int ring_offset) | 
 | { | 
 | 	unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
 | 	unsigned long xfer_start = xfer_base+dev->mem_start; | 
 |  | 
 | 	if (xfer_start + count > ei_status.rmem_end) | 
 | 	{ | 
 | 		/* We must wrap the input move. */ | 
 | 		int semi_count = ei_status.rmem_end - xfer_start; | 
 | 		word_memcpy_fromcard(skb->data, (char *)dev->mem_start + | 
 | 			xfer_base, semi_count); | 
 | 		count -= semi_count; | 
 | 		word_memcpy_fromcard(skb->data + semi_count, | 
 | 				     (char *)ei_status.rmem_start, count); | 
 | 	} | 
 | 	else | 
 | 	{ | 
 | 		word_memcpy_fromcard(skb->data, (char *)dev->mem_start + | 
 | 			xfer_base, count); | 
 | 	} | 
 | } | 
 |  | 
 | static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, | 
 | 	int start_page) | 
 | { | 
 | 	long shmem = (start_page - WD_START_PG)<<8; | 
 |  | 
 | 	word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count); | 
 | } | 
 |  | 
 | static void word_memcpy_tocard(void *tp, const void *fp, int count) | 
 | { | 
 | 	volatile unsigned short *to = tp; | 
 | 	const unsigned short *from = fp; | 
 |  | 
 | 	count++; | 
 | 	count/=2; | 
 |  | 
 | 	while(count--) | 
 | 		*to++=*from++; | 
 | } | 
 |  | 
 | static void word_memcpy_fromcard(void *tp, const void *fp, int count) | 
 | { | 
 | 	unsigned short *to = tp; | 
 | 	const volatile unsigned short *from = fp; | 
 |  | 
 | 	count++; | 
 | 	count/=2; | 
 |  | 
 | 	while(count--) | 
 | 		*to++=*from++; | 
 | } | 
 |  | 
 |  |