latency.c: use QoS infrastructure
Replace latency.c use with pm_qos_params use.
Signed-off-by: mark gross <mgross@linux.intel.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/kernel/Makefile b/kernel/Makefile
index 8331243..135a1b9 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -8,7 +8,7 @@
signal.o sys.o kmod.o workqueue.o pid.o \
rcupdate.o extable.o params.o posix-timers.o \
kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
- hrtimer.o rwsem.o latency.o nsproxy.o srcu.o \
+ hrtimer.o rwsem.o nsproxy.o srcu.o \
utsname.o notifier.o ksysfs.o pm_qos_params.o
obj-$(CONFIG_SYSCTL) += sysctl_check.o
diff --git a/kernel/latency.c b/kernel/latency.c
deleted file mode 100644
index e63fcac..0000000
--- a/kernel/latency.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * latency.c: Explicit system-wide latency-expectation infrastructure
- *
- * The purpose of this infrastructure is to allow device drivers to set
- * latency constraint they have and to collect and summarize these
- * expectations globally. The cummulated result can then be used by
- * power management and similar users to make decisions that have
- * tradoffs with a latency component.
- *
- * An example user of this are the x86 C-states; each higher C state saves
- * more power, but has a higher exit latency. For the idle loop power
- * code to make a good decision which C-state to use, information about
- * acceptable latencies is required.
- *
- * An example announcer of latency is an audio driver that knowns it
- * will get an interrupt when the hardware has 200 usec of samples
- * left in the DMA buffer; in that case the driver can set a latency
- * constraint of, say, 150 usec.
- *
- * Multiple drivers can each announce their maximum accepted latency,
- * to keep these appart, a string based identifier is used.
- *
- *
- * (C) Copyright 2006 Intel Corporation
- * Author: Arjan van de Ven <arjan@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/latency.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/jiffies.h>
-#include <asm/atomic.h>
-
-struct latency_info {
- struct list_head list;
- int usecs;
- char *identifier;
-};
-
-/*
- * locking rule: all modifications to current_max_latency and
- * latency_list need to be done while holding the latency_lock.
- * latency_lock needs to be taken _irqsave.
- */
-static atomic_t current_max_latency;
-static DEFINE_SPINLOCK(latency_lock);
-
-static LIST_HEAD(latency_list);
-static BLOCKING_NOTIFIER_HEAD(latency_notifier);
-
-/*
- * This function returns the maximum latency allowed, which
- * happens to be the minimum of all maximum latencies on the
- * list.
- */
-static int __find_max_latency(void)
-{
- int min = INFINITE_LATENCY;
- struct latency_info *info;
-
- list_for_each_entry(info, &latency_list, list) {
- if (info->usecs < min)
- min = info->usecs;
- }
- return min;
-}
-
-/**
- * set_acceptable_latency - sets the maximum latency acceptable
- * @identifier: string that identifies this driver
- * @usecs: maximum acceptable latency for this driver
- *
- * This function informs the kernel that this device(driver)
- * can accept at most usecs latency. This setting is used for
- * power management and similar tradeoffs.
- *
- * This function sleeps and can only be called from process
- * context.
- * Calling this function with an existing identifier is valid
- * and will cause the existing latency setting to be changed.
- */
-void set_acceptable_latency(char *identifier, int usecs)
-{
- struct latency_info *info, *iter;
- unsigned long flags;
- int found_old = 0;
-
- info = kzalloc(sizeof(struct latency_info), GFP_KERNEL);
- if (!info)
- return;
- info->usecs = usecs;
- info->identifier = kstrdup(identifier, GFP_KERNEL);
- if (!info->identifier)
- goto free_info;
-
- spin_lock_irqsave(&latency_lock, flags);
- list_for_each_entry(iter, &latency_list, list) {
- if (strcmp(iter->identifier, identifier)==0) {
- found_old = 1;
- iter->usecs = usecs;
- break;
- }
- }
- if (!found_old)
- list_add(&info->list, &latency_list);
-
- if (usecs < atomic_read(¤t_max_latency))
- atomic_set(¤t_max_latency, usecs);
-
- spin_unlock_irqrestore(&latency_lock, flags);
-
- blocking_notifier_call_chain(&latency_notifier,
- atomic_read(¤t_max_latency), NULL);
-
- /*
- * if we inserted the new one, we're done; otherwise there was
- * an existing one so we need to free the redundant data
- */
- if (!found_old)
- return;
-
- kfree(info->identifier);
-free_info:
- kfree(info);
-}
-EXPORT_SYMBOL_GPL(set_acceptable_latency);
-
-/**
- * modify_acceptable_latency - changes the maximum latency acceptable
- * @identifier: string that identifies this driver
- * @usecs: maximum acceptable latency for this driver
- *
- * This function informs the kernel that this device(driver)
- * can accept at most usecs latency. This setting is used for
- * power management and similar tradeoffs.
- *
- * This function does not sleep and can be called in any context.
- * Trying to use a non-existing identifier silently gets ignored.
- *
- * Due to the atomic nature of this function, the modified latency
- * value will only be used for future decisions; past decisions
- * can still lead to longer latencies in the near future.
- */
-void modify_acceptable_latency(char *identifier, int usecs)
-{
- struct latency_info *iter;
- unsigned long flags;
-
- spin_lock_irqsave(&latency_lock, flags);
- list_for_each_entry(iter, &latency_list, list) {
- if (strcmp(iter->identifier, identifier) == 0) {
- iter->usecs = usecs;
- break;
- }
- }
- if (usecs < atomic_read(¤t_max_latency))
- atomic_set(¤t_max_latency, usecs);
- spin_unlock_irqrestore(&latency_lock, flags);
-}
-EXPORT_SYMBOL_GPL(modify_acceptable_latency);
-
-/**
- * remove_acceptable_latency - removes the maximum latency acceptable
- * @identifier: string that identifies this driver
- *
- * This function removes a previously set maximum latency setting
- * for the driver and frees up any resources associated with the
- * bookkeeping needed for this.
- *
- * This function does not sleep and can be called in any context.
- * Trying to use a non-existing identifier silently gets ignored.
- */
-void remove_acceptable_latency(char *identifier)
-{
- unsigned long flags;
- int newmax = 0;
- struct latency_info *iter, *temp;
-
- spin_lock_irqsave(&latency_lock, flags);
-
- list_for_each_entry_safe(iter, temp, &latency_list, list) {
- if (strcmp(iter->identifier, identifier) == 0) {
- list_del(&iter->list);
- newmax = iter->usecs;
- kfree(iter->identifier);
- kfree(iter);
- break;
- }
- }
-
- /* If we just deleted the system wide value, we need to
- * recalculate with a full search
- */
- if (newmax == atomic_read(¤t_max_latency)) {
- newmax = __find_max_latency();
- atomic_set(¤t_max_latency, newmax);
- }
- spin_unlock_irqrestore(&latency_lock, flags);
-}
-EXPORT_SYMBOL_GPL(remove_acceptable_latency);
-
-/**
- * system_latency_constraint - queries the system wide latency maximum
- *
- * This function returns the system wide maximum latency in
- * microseconds.
- *
- * This function does not sleep and can be called in any context.
- */
-int system_latency_constraint(void)
-{
- return atomic_read(¤t_max_latency);
-}
-EXPORT_SYMBOL_GPL(system_latency_constraint);
-
-/**
- * synchronize_acceptable_latency - recalculates all latency decisions
- *
- * This function will cause a callback to various kernel pieces that
- * will make those pieces rethink their latency decisions. This implies
- * that if there are overlong latencies in hardware state already, those
- * latencies get taken right now. When this call completes no overlong
- * latency decisions should be active anymore.
- *
- * Typical usecase of this is after a modify_acceptable_latency() call,
- * which in itself is non-blocking and non-synchronizing.
- *
- * This function blocks and should not be called with locks held.
- */
-
-void synchronize_acceptable_latency(void)
-{
- blocking_notifier_call_chain(&latency_notifier,
- atomic_read(¤t_max_latency), NULL);
-}
-EXPORT_SYMBOL_GPL(synchronize_acceptable_latency);
-
-/*
- * Latency notifier: this notifier gets called when a non-atomic new
- * latency value gets set. The expectation nof the caller of the
- * non-atomic set is that when the call returns, future latencies
- * are within bounds, so the functions on the notifier list are
- * expected to take the overlong latencies immediately, inside the
- * callback, and not make a overlong latency decision anymore.
- *
- * The callback gets called when the new latency value is made
- * active so system_latency_constraint() returns the new latency.
- */
-int register_latency_notifier(struct notifier_block * nb)
-{
- return blocking_notifier_chain_register(&latency_notifier, nb);
-}
-EXPORT_SYMBOL_GPL(register_latency_notifier);
-
-int unregister_latency_notifier(struct notifier_block * nb)
-{
- return blocking_notifier_chain_unregister(&latency_notifier, nb);
-}
-EXPORT_SYMBOL_GPL(unregister_latency_notifier);
-
-static __init int latency_init(void)
-{
- atomic_set(¤t_max_latency, INFINITE_LATENCY);
- /*
- * we don't want by default to have longer latencies than 2 ticks,
- * since that would cause lost ticks
- */
- set_acceptable_latency("kernel", 2*1000000/HZ);
- return 0;
-}
-
-module_init(latency_init);