| /* | 
 |  *  linux/arch/arm/mach-mmp/aspenite.c | 
 |  * | 
 |  *  Support for the Marvell PXA168-based Aspenite and Zylonite2 | 
 |  *  Development Platform. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as | 
 |  *  publishhed by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/smc91x.h> | 
 |  | 
 | #include <asm/mach-types.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <mach/addr-map.h> | 
 | #include <mach/mfp-pxa168.h> | 
 | #include <mach/pxa168.h> | 
 | #include <mach/gpio.h> | 
 |  | 
 | #include "common.h" | 
 |  | 
 | static unsigned long common_pin_config[] __initdata = { | 
 | 	/* Data Flash Interface */ | 
 | 	GPIO0_DFI_D15, | 
 | 	GPIO1_DFI_D14, | 
 | 	GPIO2_DFI_D13, | 
 | 	GPIO3_DFI_D12, | 
 | 	GPIO4_DFI_D11, | 
 | 	GPIO5_DFI_D10, | 
 | 	GPIO6_DFI_D9, | 
 | 	GPIO7_DFI_D8, | 
 | 	GPIO8_DFI_D7, | 
 | 	GPIO9_DFI_D6, | 
 | 	GPIO10_DFI_D5, | 
 | 	GPIO11_DFI_D4, | 
 | 	GPIO12_DFI_D3, | 
 | 	GPIO13_DFI_D2, | 
 | 	GPIO14_DFI_D1, | 
 | 	GPIO15_DFI_D0, | 
 |  | 
 | 	/* Static Memory Controller */ | 
 | 	GPIO18_SMC_nCS0, | 
 | 	GPIO34_SMC_nCS1, | 
 | 	GPIO23_SMC_nLUA, | 
 | 	GPIO25_SMC_nLLA, | 
 | 	GPIO28_SMC_RDY, | 
 | 	GPIO29_SMC_SCLK, | 
 | 	GPIO35_SMC_BE1, | 
 | 	GPIO36_SMC_BE2, | 
 | 	GPIO27_GPIO,	/* Ethernet IRQ */ | 
 |  | 
 | 	/* UART1 */ | 
 | 	GPIO107_UART1_RXD, | 
 | 	GPIO108_UART1_TXD, | 
 | }; | 
 |  | 
 | static struct smc91x_platdata smc91x_info = { | 
 | 	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT, | 
 | }; | 
 |  | 
 | static struct resource smc91x_resources[] = { | 
 | 	[0] = { | 
 | 		.start	= SMC_CS1_PHYS_BASE + 0x300, | 
 | 		.end	= SMC_CS1_PHYS_BASE + 0xfffff, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.start	= gpio_to_irq(27), | 
 | 		.end	= gpio_to_irq(27), | 
 | 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct platform_device smc91x_device = { | 
 | 	.name		= "smc91x", | 
 | 	.id		= 0, | 
 | 	.dev		= { | 
 | 		.platform_data = &smc91x_info, | 
 | 	}, | 
 | 	.num_resources	= ARRAY_SIZE(smc91x_resources), | 
 | 	.resource	= smc91x_resources, | 
 | }; | 
 |  | 
 | static void __init common_init(void) | 
 | { | 
 | 	mfp_config(ARRAY_AND_SIZE(common_pin_config)); | 
 |  | 
 | 	/* on-chip devices */ | 
 | 	pxa168_add_uart(1); | 
 |  | 
 | 	/* off-chip devices */ | 
 | 	platform_device_register(&smc91x_device); | 
 | } | 
 |  | 
 | MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") | 
 | 	.phys_io        = APB_PHYS_BASE, | 
 | 	.boot_params    = 0x00000100, | 
 | 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc, | 
 | 	.map_io		= pxa_map_io, | 
 | 	.init_irq       = pxa168_init_irq, | 
 | 	.timer          = &pxa168_timer, | 
 | 	.init_machine   = common_init, | 
 | MACHINE_END | 
 |  | 
 | MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") | 
 | 	.phys_io        = APB_PHYS_BASE, | 
 | 	.boot_params    = 0x00000100, | 
 | 	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc, | 
 | 	.map_io		= pxa_map_io, | 
 | 	.init_irq       = pxa168_init_irq, | 
 | 	.timer          = &pxa168_timer, | 
 | 	.init_machine   = common_init, | 
 | MACHINE_END |