|  | /* -*- linux-c -*- ------------------------------------------------------- * | 
|  | * | 
|  | *   Copyright (C) 1991, 1992 Linus Torvalds | 
|  | *   Copyright 2007 rPath, Inc. - All Rights Reserved | 
|  | *   Copyright 2009 Intel Corporation; author H. Peter Anvin | 
|  | * | 
|  | *   This file is part of the Linux kernel, and is made available under | 
|  | *   the terms of the GNU General Public License version 2. | 
|  | * | 
|  | * ----------------------------------------------------------------------- */ | 
|  |  | 
|  | /* | 
|  | * Common all-VGA modes | 
|  | */ | 
|  |  | 
|  | #include "boot.h" | 
|  | #include "video.h" | 
|  |  | 
|  | static struct mode_info vga_modes[] = { | 
|  | { VIDEO_80x25,  80, 25, 0 }, | 
|  | { VIDEO_8POINT, 80, 50, 0 }, | 
|  | { VIDEO_80x43,  80, 43, 0 }, | 
|  | { VIDEO_80x28,  80, 28, 0 }, | 
|  | { VIDEO_80x30,  80, 30, 0 }, | 
|  | { VIDEO_80x34,  80, 34, 0 }, | 
|  | { VIDEO_80x60,  80, 60, 0 }, | 
|  | }; | 
|  |  | 
|  | static struct mode_info ega_modes[] = { | 
|  | { VIDEO_80x25,  80, 25, 0 }, | 
|  | { VIDEO_8POINT, 80, 43, 0 }, | 
|  | }; | 
|  |  | 
|  | static struct mode_info cga_modes[] = { | 
|  | { VIDEO_80x25,  80, 25, 0 }, | 
|  | }; | 
|  |  | 
|  | static __videocard video_vga; | 
|  |  | 
|  | /* Set basic 80x25 mode */ | 
|  | static u8 vga_set_basic_mode(void) | 
|  | { | 
|  | struct biosregs ireg, oreg; | 
|  | u16 ax; | 
|  | u8 rows; | 
|  | u8 mode; | 
|  |  | 
|  | initregs(&ireg); | 
|  |  | 
|  | #ifdef CONFIG_VIDEO_400_HACK | 
|  | if (adapter >= ADAPTER_VGA) { | 
|  | ireg.ax = 0x1202; | 
|  | ireg.bx = 0x0030; | 
|  | intcall(0x10, &ireg, NULL); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | ax = 0x0f00; | 
|  | intcall(0x10, &ireg, &oreg); | 
|  | mode = oreg.al; | 
|  |  | 
|  | set_fs(0); | 
|  | rows = rdfs8(0x484);	/* rows minus one */ | 
|  |  | 
|  | #ifndef CONFIG_VIDEO_400_HACK | 
|  | if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) && | 
|  | (rows == 0 || rows == 24)) | 
|  | return mode; | 
|  | #endif | 
|  |  | 
|  | if (mode != 3 && mode != 7) | 
|  | mode = 3; | 
|  |  | 
|  | /* Set the mode */ | 
|  | ireg.ax = mode;		/* AH=0: set mode */ | 
|  | intcall(0x10, &ireg, NULL); | 
|  | do_restore = 1; | 
|  | return mode; | 
|  | } | 
|  |  | 
|  | static void vga_set_8font(void) | 
|  | { | 
|  | /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */ | 
|  | struct biosregs ireg; | 
|  |  | 
|  | initregs(&ireg); | 
|  |  | 
|  | /* Set 8x8 font */ | 
|  | ireg.ax = 0x1112; | 
|  | /* ireg.bl = 0; */ | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Use alternate print screen */ | 
|  | ireg.ax = 0x1200; | 
|  | ireg.bl = 0x20; | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Turn off cursor emulation */ | 
|  | ireg.ax = 0x1201; | 
|  | ireg.bl = 0x34; | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Cursor is scan lines 6-7 */ | 
|  | ireg.ax = 0x0100; | 
|  | ireg.cx = 0x0607; | 
|  | intcall(0x10, &ireg, NULL); | 
|  | } | 
|  |  | 
|  | static void vga_set_14font(void) | 
|  | { | 
|  | /* Set 9x14 font - 80x28 on VGA */ | 
|  | struct biosregs ireg; | 
|  |  | 
|  | initregs(&ireg); | 
|  |  | 
|  | /* Set 9x14 font */ | 
|  | ireg.ax = 0x1111; | 
|  | /* ireg.bl = 0; */ | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Turn off cursor emulation */ | 
|  | ireg.ax = 0x1201; | 
|  | ireg.bl = 0x34; | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Cursor is scan lines 11-12 */ | 
|  | ireg.ax = 0x0100; | 
|  | ireg.cx = 0x0b0c; | 
|  | intcall(0x10, &ireg, NULL); | 
|  | } | 
|  |  | 
|  | static void vga_set_80x43(void) | 
|  | { | 
|  | /* Set 80x43 mode on VGA (not EGA) */ | 
|  | struct biosregs ireg; | 
|  |  | 
|  | initregs(&ireg); | 
|  |  | 
|  | /* Set 350 scans */ | 
|  | ireg.ax = 0x1201; | 
|  | ireg.bl = 0x30; | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | /* Reset video mode */ | 
|  | ireg.ax = 0x0003; | 
|  | intcall(0x10, &ireg, NULL); | 
|  |  | 
|  | vga_set_8font(); | 
|  | } | 
|  |  | 
|  | /* I/O address of the VGA CRTC */ | 
|  | u16 vga_crtc(void) | 
|  | { | 
|  | return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; | 
|  | } | 
|  |  | 
|  | static void vga_set_480_scanlines(void) | 
|  | { | 
|  | u16 crtc;		/* CRTC base address */ | 
|  | u8  csel;		/* CRTC miscellaneous output register */ | 
|  |  | 
|  | crtc = vga_crtc(); | 
|  |  | 
|  | out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ | 
|  | out_idx(0x0b, crtc, 0x06); /* Vertical total */ | 
|  | out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ | 
|  | out_idx(0xea, crtc, 0x10); /* Vertical sync start */ | 
|  | out_idx(0xdf, crtc, 0x12); /* Vertical display end */ | 
|  | out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ | 
|  | out_idx(0x04, crtc, 0x16); /* Vertical blank end */ | 
|  | csel = inb(0x3cc); | 
|  | csel &= 0x0d; | 
|  | csel |= 0xe2; | 
|  | outb(csel, 0x3c2); | 
|  | } | 
|  |  | 
|  | static void vga_set_vertical_end(int lines) | 
|  | { | 
|  | u16 crtc;		/* CRTC base address */ | 
|  | u8  ovfw;		/* CRTC overflow register */ | 
|  | int end = lines-1; | 
|  |  | 
|  | crtc = vga_crtc(); | 
|  |  | 
|  | ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); | 
|  |  | 
|  | out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ | 
|  | out_idx(end,  crtc, 0x12); /* Vertical display end */ | 
|  | } | 
|  |  | 
|  | static void vga_set_80x30(void) | 
|  | { | 
|  | vga_set_480_scanlines(); | 
|  | vga_set_vertical_end(30*16); | 
|  | } | 
|  |  | 
|  | static void vga_set_80x34(void) | 
|  | { | 
|  | vga_set_480_scanlines(); | 
|  | vga_set_14font(); | 
|  | vga_set_vertical_end(34*14); | 
|  | } | 
|  |  | 
|  | static void vga_set_80x60(void) | 
|  | { | 
|  | vga_set_480_scanlines(); | 
|  | vga_set_8font(); | 
|  | vga_set_vertical_end(60*8); | 
|  | } | 
|  |  | 
|  | static int vga_set_mode(struct mode_info *mode) | 
|  | { | 
|  | /* Set the basic mode */ | 
|  | vga_set_basic_mode(); | 
|  |  | 
|  | /* Override a possibly broken BIOS */ | 
|  | force_x = mode->x; | 
|  | force_y = mode->y; | 
|  |  | 
|  | switch (mode->mode) { | 
|  | case VIDEO_80x25: | 
|  | break; | 
|  | case VIDEO_8POINT: | 
|  | vga_set_8font(); | 
|  | break; | 
|  | case VIDEO_80x43: | 
|  | vga_set_80x43(); | 
|  | break; | 
|  | case VIDEO_80x28: | 
|  | vga_set_14font(); | 
|  | break; | 
|  | case VIDEO_80x30: | 
|  | vga_set_80x30(); | 
|  | break; | 
|  | case VIDEO_80x34: | 
|  | vga_set_80x34(); | 
|  | break; | 
|  | case VIDEO_80x60: | 
|  | vga_set_80x60(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: this probe includes basic information required by all | 
|  | * systems.  It should be executed first, by making sure | 
|  | * video-vga.c is listed first in the Makefile. | 
|  | */ | 
|  | static int vga_probe(void) | 
|  | { | 
|  | static const char *card_name[] = { | 
|  | "CGA/MDA/HGC", "EGA", "VGA" | 
|  | }; | 
|  | static struct mode_info *mode_lists[] = { | 
|  | cga_modes, | 
|  | ega_modes, | 
|  | vga_modes, | 
|  | }; | 
|  | static int mode_count[] = { | 
|  | sizeof(cga_modes)/sizeof(struct mode_info), | 
|  | sizeof(ega_modes)/sizeof(struct mode_info), | 
|  | sizeof(vga_modes)/sizeof(struct mode_info), | 
|  | }; | 
|  |  | 
|  | struct biosregs ireg, oreg; | 
|  |  | 
|  | initregs(&ireg); | 
|  |  | 
|  | ireg.ax = 0x1200; | 
|  | ireg.bl = 0x10;		/* Check EGA/VGA */ | 
|  | intcall(0x10, &ireg, &oreg); | 
|  |  | 
|  | #ifndef _WAKEUP | 
|  | boot_params.screen_info.orig_video_ega_bx = oreg.bx; | 
|  | #endif | 
|  |  | 
|  | /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ | 
|  | if (oreg.bl != 0x10) { | 
|  | /* EGA/VGA */ | 
|  | ireg.ax = 0x1a00; | 
|  | intcall(0x10, &ireg, &oreg); | 
|  |  | 
|  | if (oreg.al == 0x1a) { | 
|  | adapter = ADAPTER_VGA; | 
|  | #ifndef _WAKEUP | 
|  | boot_params.screen_info.orig_video_isVGA = 1; | 
|  | #endif | 
|  | } else { | 
|  | adapter = ADAPTER_EGA; | 
|  | } | 
|  | } else { | 
|  | adapter = ADAPTER_CGA; | 
|  | } | 
|  |  | 
|  | video_vga.modes = mode_lists[adapter]; | 
|  | video_vga.card_name = card_name[adapter]; | 
|  | return mode_count[adapter]; | 
|  | } | 
|  |  | 
|  | static __videocard video_vga = { | 
|  | .card_name	= "VGA", | 
|  | .probe		= vga_probe, | 
|  | .set_mode	= vga_set_mode, | 
|  | }; |