[PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver
We cannot assume that the BIOS will be correctly setting up the hardware, so
set some bits in various display registers to enable video output. Allow an
advanced user to specify a frambuffer size, rather then probing the BIOS. All
of these fixes were prompted by the OLPC effort.
[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 2b2a788..616ce33 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -178,7 +178,21 @@
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, fp_pm, misc;
+
+ /* Set up the MISC register */
+
+ misc = readl(par->vid_regs + GX_MISC);
+
+ /* Power up the DAC */
+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+ /* Disable gamma correction */
+ misc |= GX_MISC_GAM_EN;
+
+ writel(misc, par->vid_regs + GX_MISC);
+
+ /* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
@@ -199,9 +213,17 @@
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ /* Enable the display logic */
+ /* Set up the DACS to blank normally */
+
+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+ /* Enable the external DAC VREF? */
+
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on flat panel. */
+
fp_pm = readl(par->vid_regs + GX_FP_PM);
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);