omap3 nand: fix issue in board file to detect nand
Board file modified for not to provide gpmc phys_base address to nand driver.
The gpmc_nand_init funciton is now used to detect the nand and required to
adopt _prob function as in nand/omap2.c
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index f8303f7..96e16f7 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -59,9 +59,6 @@
#include "mux.h"
#include "hsmmc.h"
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
-
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP_DM9000_GPIO_IRQ 25
@@ -105,20 +102,6 @@
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
-static struct resource devkit8000_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &devkit8000_nand_data,
- },
- .num_resources = 1,
- .resource = &devkit8000_nand_resource,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -591,8 +574,6 @@
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -614,13 +595,9 @@
if (nandcs < GPMC_CS_NUM) {
devkit8000_nand_data.cs = nandcs;
- devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- devkit8000_nand_data.gpmc_baseaddr = (void *)
- (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&devkit8000_nand_device) < 0)
+ if (gpmc_nand_init(&devkit8000_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}