[media] Add support for Prof Revolution DVB-S2 8000 PCI-E card
The device is based on STV0903 demodulator, STB6100 tuner
and CX23885 chipset; subsystem id: 8000:3034
This is a modified version of the official Prof Tuners Group patch:
http://www.proftuners.com/sites/default/files/prof8000_0.patch
[mchehab@redhat.com: trivial merge conflict fixup]
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index 9c6afe9..4b99a26 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -18,6 +18,8 @@
select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index d889bd2..39a4a4b 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -565,6 +565,10 @@
[CX23885_BOARD_TEVII_S471] = {
.name = "TeVii S471",
.portb = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_PROF_8000] = {
+ .name = "Prof Revolution DVB-S2 8000",
+ .portb = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -777,6 +781,10 @@
.subvendor = 0xd471,
.subdevice = 0x9022,
.card = CX23885_BOARD_TEVII_S471,
+ }, {
+ .subvendor = 0x8000,
+ .subdevice = 0x3034,
+ .card = CX23885_BOARD_PROF_8000,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1156,6 +1164,7 @@
cx_set(GP0_IO, 0x00040004);
break;
case CX23885_BOARD_TBS_6920:
+ case CX23885_BOARD_PROF_8000:
cx_write(MC417_CTL, 0x00000036);
cx_write(MC417_OEN, 0x00001000);
cx_set(MC417_RWD, 0x00000002);
@@ -1540,6 +1549,7 @@
case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_TEVII_S471:
case CX23885_BOARD_DVBWORLD_2005:
+ case CX23885_BOARD_PROF_8000:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index f3202a5..4379d8a 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -63,6 +63,9 @@
#include "stv0367.h"
#include "drxk.h"
#include "mt2063.h"
+#include "stv090x.h"
+#include "stb6100.h"
+#include "stb6100_cfg.h"
static unsigned int debug;
@@ -489,6 +492,42 @@
.if_khz = 5380,
};
+static struct stv090x_config prof_8000_stv090x_config = {
+ .device = STV0903,
+ .demod_mode = STV090x_SINGLE,
+ .clk_mode = STV090x_CLK_EXT,
+ .xtal = 27000000,
+ .address = 0x6A,
+ .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED,
+ .repeater_level = STV090x_RPTLEVEL_64,
+ .adc1_range = STV090x_ADC_2Vpp,
+ .diseqc_envelope_mode = false,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+};
+
+static struct stb6100_config prof_8000_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ if (voltage == SEC_VOLTAGE_18)
+ cx_write(MC417_RWD, 0x00001e00);
+ else if (voltage == SEC_VOLTAGE_13)
+ cx_write(MC417_RWD, 0x00001a00);
+ else
+ cx_write(MC417_RWD, 0x00001800);
+ return 0;
+}
+
static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
@@ -1186,6 +1225,23 @@
&tevii_ds3000_config,
&i2c_bus->i2c_adap);
break;
+ case CX23885_BOARD_PROF_8000:
+ i2c_bus = &dev->i2c_bus[0];
+
+ fe0->dvb.frontend = dvb_attach(stv090x_attach,
+ &prof_8000_stv090x_config,
+ &i2c_bus->i2c_adap,
+ STV090x_DEMODULATOR_0);
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(stb6100_attach,
+ fe0->dvb.frontend,
+ &prof_8000_stb6100_config,
+ &i2c_bus->i2c_adap))
+ goto frontend_detach;
+
+ fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 5d560c7..67f40d3 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -90,6 +90,7 @@
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define CX23885_BOARD_TEVII_S471 35
#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
+#define CX23885_BOARD_PROF_8000 37
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002