iwlwifi: calibration command namespace renaming
Since calibration framework is not HW specific remove 5000 and 4965 prefix
This patch doesn't provide any functional changes only code renaming
and movement
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index f3316d4..b4b7e8b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -337,10 +337,10 @@
data->delta_gain_code[1], data->delta_gain_code[2]);
if (!data->radio_write) {
- struct iwl5000_calibration_chain_noise_gain_cmd cmd;
+ struct iwl_calib_chain_noise_gain_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
- cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD;
+ cmd.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD;
cmd.delta_gain_1 = data->delta_gain_code[1];
cmd.delta_gain_2 = data->delta_gain_code[2];
iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD,
@@ -364,10 +364,10 @@
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
- struct iwl5000_calibration_chain_noise_reset_cmd cmd;
+ struct iwl_calib_chain_noise_reset_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
- cmd.op_code = IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD;
+ cmd.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD;
if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
sizeof(cmd), &cmd))
IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
@@ -420,25 +420,25 @@
*/
static int iwl5000_set_Xtal_calib(struct iwl_priv *priv)
{
- u8 data[sizeof(struct iwl5000_calib_hdr) +
+ u8 data[sizeof(struct iwl_calib_hdr) +
sizeof(struct iwl_cal_xtal_freq)];
- struct iwl5000_calib_cmd *cmd = (struct iwl5000_calib_cmd *)data;
+ struct iwl_calib_cmd *cmd = (struct iwl_calib_cmd *)data;
struct iwl_cal_xtal_freq *xtal = (struct iwl_cal_xtal_freq *)cmd->data;
u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
- cmd->hdr.op_code = IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
+ cmd->hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
xtal->cap_pin1 = (u8)xtal_calib[0];
xtal->cap_pin2 = (u8)xtal_calib[1];
- return iwl_calib_set(&priv->calib_results[IWL5000_CALIB_XTAL],
+ return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL],
data, sizeof(data));
}
static int iwl5000_send_calib_cfg(struct iwl_priv *priv)
{
- struct iwl5000_calib_cfg_cmd calib_cfg_cmd;
+ struct iwl_calib_cfg_cmd calib_cfg_cmd;
struct iwl_host_cmd cmd = {
.id = CALIBRATION_CFG_CMD,
- .len = sizeof(struct iwl5000_calib_cfg_cmd),
+ .len = sizeof(struct iwl_calib_cfg_cmd),
.data = &calib_cfg_cmd,
};
@@ -455,7 +455,7 @@
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
- struct iwl5000_calib_hdr *hdr = (struct iwl5000_calib_hdr *)pkt->u.raw;
+ struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw;
int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK;
int index;
@@ -466,14 +466,14 @@
* uCode. iwl_send_calib_results sends them in a row according to their
* index. We sort them here */
switch (hdr->op_code) {
- case IWL5000_PHY_CALIBRATE_LO_CMD:
- index = IWL5000_CALIB_LO;
+ case IWL_PHY_CALIBRATE_LO_CMD:
+ index = IWL_CALIB_LO;
break;
- case IWL5000_PHY_CALIBRATE_TX_IQ_CMD:
- index = IWL5000_CALIB_TX_IQ;
+ case IWL_PHY_CALIBRATE_TX_IQ_CMD:
+ index = IWL_CALIB_TX_IQ;
break;
- case IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD:
- index = IWL5000_CALIB_TX_IQ_PERD;
+ case IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD:
+ index = IWL_CALIB_TX_IQ_PERD;
break;
default:
IWL_ERROR("Unknown calibration notification %d\n",
@@ -839,10 +839,10 @@
case CSR_HW_REV_TYPE_5300:
case CSR_HW_REV_TYPE_5350:
priv->hw_params.calib_init_cfg =
- BIT(IWL5000_CALIB_XTAL) |
- BIT(IWL5000_CALIB_LO) |
- BIT(IWL5000_CALIB_TX_IQ) |
- BIT(IWL5000_CALIB_TX_IQ_PERD);
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_TX_IQ_PERD);
break;
case CSR_HW_REV_TYPE_5150:
priv->hw_params.calib_init_cfg = 0;