| /* | 
 |  * Connection Management Procedures (IEC 61883-1) helper functions | 
 |  * | 
 |  * Copyright (c) Clemens Ladisch <clemens@ladisch.de> | 
 |  * Licensed under the terms of the GNU General Public License, version 2. | 
 |  */ | 
 |  | 
 | #include <linux/device.h> | 
 | #include <linux/firewire.h> | 
 | #include <linux/firewire-constants.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include "lib.h" | 
 | #include "iso-resources.h" | 
 | #include "cmp.h" | 
 |  | 
 | #define IMPR_SPEED_MASK		0xc0000000 | 
 | #define IMPR_SPEED_SHIFT	30 | 
 | #define IMPR_XSPEED_MASK	0x00000060 | 
 | #define IMPR_XSPEED_SHIFT	5 | 
 | #define IMPR_PLUGS_MASK		0x0000001f | 
 |  | 
 | #define IPCR_ONLINE		0x80000000 | 
 | #define IPCR_BCAST_CONN		0x40000000 | 
 | #define IPCR_P2P_CONN_MASK	0x3f000000 | 
 | #define IPCR_P2P_CONN_SHIFT	24 | 
 | #define IPCR_CHANNEL_MASK	0x003f0000 | 
 | #define IPCR_CHANNEL_SHIFT	16 | 
 |  | 
 | enum bus_reset_handling { | 
 | 	ABORT_ON_BUS_RESET, | 
 | 	SUCCEED_ON_BUS_RESET, | 
 | }; | 
 |  | 
 | static __printf(2, 3) | 
 | void cmp_error(struct cmp_connection *c, const char *fmt, ...) | 
 | { | 
 | 	va_list va; | 
 |  | 
 | 	va_start(va, fmt); | 
 | 	dev_err(&c->resources.unit->device, "%cPCR%u: %pV", | 
 | 		'i', c->pcr_index, &(struct va_format){ fmt, &va }); | 
 | 	va_end(va); | 
 | } | 
 |  | 
 | static int pcr_modify(struct cmp_connection *c, | 
 | 		      __be32 (*modify)(struct cmp_connection *c, __be32 old), | 
 | 		      int (*check)(struct cmp_connection *c, __be32 pcr), | 
 | 		      enum bus_reset_handling bus_reset_handling) | 
 | { | 
 | 	struct fw_device *device = fw_parent_device(c->resources.unit); | 
 | 	int generation = c->resources.generation; | 
 | 	int rcode, errors = 0; | 
 | 	__be32 old_arg, buffer[2]; | 
 | 	int err; | 
 |  | 
 | 	buffer[0] = c->last_pcr_value; | 
 | 	for (;;) { | 
 | 		old_arg = buffer[0]; | 
 | 		buffer[1] = modify(c, buffer[0]); | 
 |  | 
 | 		rcode = fw_run_transaction( | 
 | 				device->card, TCODE_LOCK_COMPARE_SWAP, | 
 | 				device->node_id, generation, device->max_speed, | 
 | 				CSR_REGISTER_BASE + CSR_IPCR(c->pcr_index), | 
 | 				buffer, 8); | 
 |  | 
 | 		if (rcode == RCODE_COMPLETE) { | 
 | 			if (buffer[0] == old_arg) /* success? */ | 
 | 				break; | 
 |  | 
 | 			if (check) { | 
 | 				err = check(c, buffer[0]); | 
 | 				if (err < 0) | 
 | 					return err; | 
 | 			} | 
 | 		} else if (rcode == RCODE_GENERATION) | 
 | 			goto bus_reset; | 
 | 		else if (rcode_is_permanent_error(rcode) || ++errors >= 3) | 
 | 			goto io_error; | 
 | 	} | 
 | 	c->last_pcr_value = buffer[1]; | 
 |  | 
 | 	return 0; | 
 |  | 
 | io_error: | 
 | 	cmp_error(c, "transaction failed: %s\n", rcode_string(rcode)); | 
 | 	return -EIO; | 
 |  | 
 | bus_reset: | 
 | 	return bus_reset_handling == ABORT_ON_BUS_RESET ? -EAGAIN : 0; | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * cmp_connection_init - initializes a connection manager | 
 |  * @c: the connection manager to initialize | 
 |  * @unit: a unit of the target device | 
 |  * @ipcr_index: the index of the iPCR on the target device | 
 |  */ | 
 | int cmp_connection_init(struct cmp_connection *c, | 
 | 			struct fw_unit *unit, | 
 | 			unsigned int ipcr_index) | 
 | { | 
 | 	__be32 impr_be; | 
 | 	u32 impr; | 
 | 	int err; | 
 |  | 
 | 	err = snd_fw_transaction(unit, TCODE_READ_QUADLET_REQUEST, | 
 | 				 CSR_REGISTER_BASE + CSR_IMPR, | 
 | 				 &impr_be, 4); | 
 | 	if (err < 0) | 
 | 		return err; | 
 | 	impr = be32_to_cpu(impr_be); | 
 |  | 
 | 	if (ipcr_index >= (impr & IMPR_PLUGS_MASK)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	err = fw_iso_resources_init(&c->resources, unit); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	c->connected = false; | 
 | 	mutex_init(&c->mutex); | 
 | 	c->last_pcr_value = cpu_to_be32(0x80000000); | 
 | 	c->pcr_index = ipcr_index; | 
 | 	c->max_speed = (impr & IMPR_SPEED_MASK) >> IMPR_SPEED_SHIFT; | 
 | 	if (c->max_speed == SCODE_BETA) | 
 | 		c->max_speed += (impr & IMPR_XSPEED_MASK) >> IMPR_XSPEED_SHIFT; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(cmp_connection_init); | 
 |  | 
 | /** | 
 |  * cmp_connection_destroy - free connection manager resources | 
 |  * @c: the connection manager | 
 |  */ | 
 | void cmp_connection_destroy(struct cmp_connection *c) | 
 | { | 
 | 	WARN_ON(c->connected); | 
 | 	mutex_destroy(&c->mutex); | 
 | 	fw_iso_resources_destroy(&c->resources); | 
 | } | 
 | EXPORT_SYMBOL(cmp_connection_destroy); | 
 |  | 
 |  | 
 | static __be32 ipcr_set_modify(struct cmp_connection *c, __be32 ipcr) | 
 | { | 
 | 	ipcr &= ~cpu_to_be32(IPCR_BCAST_CONN | | 
 | 			     IPCR_P2P_CONN_MASK | | 
 | 			     IPCR_CHANNEL_MASK); | 
 | 	ipcr |= cpu_to_be32(1 << IPCR_P2P_CONN_SHIFT); | 
 | 	ipcr |= cpu_to_be32(c->resources.channel << IPCR_CHANNEL_SHIFT); | 
 |  | 
 | 	return ipcr; | 
 | } | 
 |  | 
 | static int ipcr_set_check(struct cmp_connection *c, __be32 ipcr) | 
 | { | 
 | 	if (ipcr & cpu_to_be32(IPCR_BCAST_CONN | | 
 | 			       IPCR_P2P_CONN_MASK)) { | 
 | 		cmp_error(c, "plug is already in use\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 | 	if (!(ipcr & cpu_to_be32(IPCR_ONLINE))) { | 
 | 		cmp_error(c, "plug is not on-line\n"); | 
 | 		return -ECONNREFUSED; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * cmp_connection_establish - establish a connection to the target | 
 |  * @c: the connection manager | 
 |  * @max_payload_bytes: the amount of data (including CIP headers) per packet | 
 |  * | 
 |  * This function establishes a point-to-point connection from the local | 
 |  * computer to the target by allocating isochronous resources (channel and | 
 |  * bandwidth) and setting the target's input plug control register.  When this | 
 |  * function succeeds, the caller is responsible for starting transmitting | 
 |  * packets. | 
 |  */ | 
 | int cmp_connection_establish(struct cmp_connection *c, | 
 | 			     unsigned int max_payload_bytes) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (WARN_ON(c->connected)) | 
 | 		return -EISCONN; | 
 |  | 
 | 	c->speed = min(c->max_speed, | 
 | 		       fw_parent_device(c->resources.unit)->max_speed); | 
 |  | 
 | 	mutex_lock(&c->mutex); | 
 |  | 
 | retry_after_bus_reset: | 
 | 	err = fw_iso_resources_allocate(&c->resources, | 
 | 					max_payload_bytes, c->speed); | 
 | 	if (err < 0) | 
 | 		goto err_mutex; | 
 |  | 
 | 	err = pcr_modify(c, ipcr_set_modify, ipcr_set_check, | 
 | 			 ABORT_ON_BUS_RESET); | 
 | 	if (err == -EAGAIN) { | 
 | 		fw_iso_resources_free(&c->resources); | 
 | 		goto retry_after_bus_reset; | 
 | 	} | 
 | 	if (err < 0) | 
 | 		goto err_resources; | 
 |  | 
 | 	c->connected = true; | 
 |  | 
 | 	mutex_unlock(&c->mutex); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_resources: | 
 | 	fw_iso_resources_free(&c->resources); | 
 | err_mutex: | 
 | 	mutex_unlock(&c->mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 | EXPORT_SYMBOL(cmp_connection_establish); | 
 |  | 
 | /** | 
 |  * cmp_connection_update - update the connection after a bus reset | 
 |  * @c: the connection manager | 
 |  * | 
 |  * This function must be called from the driver's .update handler to reestablish | 
 |  * any connection that might have been active. | 
 |  * | 
 |  * Returns zero on success, or a negative error code.  On an error, the | 
 |  * connection is broken and the caller must stop transmitting iso packets. | 
 |  */ | 
 | int cmp_connection_update(struct cmp_connection *c) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&c->mutex); | 
 |  | 
 | 	if (!c->connected) { | 
 | 		mutex_unlock(&c->mutex); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	err = fw_iso_resources_update(&c->resources); | 
 | 	if (err < 0) | 
 | 		goto err_unconnect; | 
 |  | 
 | 	err = pcr_modify(c, ipcr_set_modify, ipcr_set_check, | 
 | 			 SUCCEED_ON_BUS_RESET); | 
 | 	if (err < 0) | 
 | 		goto err_resources; | 
 |  | 
 | 	mutex_unlock(&c->mutex); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_resources: | 
 | 	fw_iso_resources_free(&c->resources); | 
 | err_unconnect: | 
 | 	c->connected = false; | 
 | 	mutex_unlock(&c->mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 | EXPORT_SYMBOL(cmp_connection_update); | 
 |  | 
 |  | 
 | static __be32 ipcr_break_modify(struct cmp_connection *c, __be32 ipcr) | 
 | { | 
 | 	return ipcr & ~cpu_to_be32(IPCR_BCAST_CONN | IPCR_P2P_CONN_MASK); | 
 | } | 
 |  | 
 | /** | 
 |  * cmp_connection_break - break the connection to the target | 
 |  * @c: the connection manager | 
 |  * | 
 |  * This function deactives the connection in the target's input plug control | 
 |  * register, and frees the isochronous resources of the connection.  Before | 
 |  * calling this function, the caller should cease transmitting packets. | 
 |  */ | 
 | void cmp_connection_break(struct cmp_connection *c) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&c->mutex); | 
 |  | 
 | 	if (!c->connected) { | 
 | 		mutex_unlock(&c->mutex); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	err = pcr_modify(c, ipcr_break_modify, NULL, SUCCEED_ON_BUS_RESET); | 
 | 	if (err < 0) | 
 | 		cmp_error(c, "plug is still connected\n"); | 
 |  | 
 | 	fw_iso_resources_free(&c->resources); | 
 |  | 
 | 	c->connected = false; | 
 |  | 
 | 	mutex_unlock(&c->mutex); | 
 | } | 
 | EXPORT_SYMBOL(cmp_connection_break); |