|  | /* | 
|  | * linux/drivers/s390/cio/qdio_main.c | 
|  | * | 
|  | * Linux for s390 qdio support, buffer handling, qdio API and module support. | 
|  | * | 
|  | * Copyright 2000,2008 IBM Corp. | 
|  | * Author(s): Utz Bacher <utz.bacher@de.ibm.com> | 
|  | *	      Jan Glauber <jang@linux.vnet.ibm.com> | 
|  | * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com> | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/delay.h> | 
|  | #include <asm/atomic.h> | 
|  | #include <asm/debug.h> | 
|  | #include <asm/qdio.h> | 
|  |  | 
|  | #include "cio.h" | 
|  | #include "css.h" | 
|  | #include "device.h" | 
|  | #include "qdio.h" | 
|  | #include "qdio_debug.h" | 
|  | #include "qdio_perf.h" | 
|  |  | 
|  | MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\ | 
|  | "Jan Glauber <jang@linux.vnet.ibm.com>"); | 
|  | MODULE_DESCRIPTION("QDIO base support"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static inline int do_siga_sync(struct subchannel_id schid, | 
|  | unsigned int out_mask, unsigned int in_mask) | 
|  | { | 
|  | register unsigned long __fc asm ("0") = 2; | 
|  | register struct subchannel_id __schid asm ("1") = schid; | 
|  | register unsigned long out asm ("2") = out_mask; | 
|  | register unsigned long in asm ("3") = in_mask; | 
|  | int cc; | 
|  |  | 
|  | asm volatile( | 
|  | "	siga	0\n" | 
|  | "	ipm	%0\n" | 
|  | "	srl	%0,28\n" | 
|  | : "=d" (cc) | 
|  | : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | static inline int do_siga_input(struct subchannel_id schid, unsigned int mask) | 
|  | { | 
|  | register unsigned long __fc asm ("0") = 1; | 
|  | register struct subchannel_id __schid asm ("1") = schid; | 
|  | register unsigned long __mask asm ("2") = mask; | 
|  | int cc; | 
|  |  | 
|  | asm volatile( | 
|  | "	siga	0\n" | 
|  | "	ipm	%0\n" | 
|  | "	srl	%0,28\n" | 
|  | : "=d" (cc) | 
|  | : "d" (__fc), "d" (__schid), "d" (__mask) : "cc", "memory"); | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * do_siga_output - perform SIGA-w/wt function | 
|  | * @schid: subchannel id or in case of QEBSM the subchannel token | 
|  | * @mask: which output queues to process | 
|  | * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer | 
|  | * @fc: function code to perform | 
|  | * | 
|  | * Returns cc or QDIO_ERROR_SIGA_ACCESS_EXCEPTION. | 
|  | * Note: For IQDC unicast queues only the highest priority queue is processed. | 
|  | */ | 
|  | static inline int do_siga_output(unsigned long schid, unsigned long mask, | 
|  | u32 *bb, unsigned int fc) | 
|  | { | 
|  | register unsigned long __fc asm("0") = fc; | 
|  | register unsigned long __schid asm("1") = schid; | 
|  | register unsigned long __mask asm("2") = mask; | 
|  | int cc = QDIO_ERROR_SIGA_ACCESS_EXCEPTION; | 
|  |  | 
|  | asm volatile( | 
|  | "	siga	0\n" | 
|  | "0:	ipm	%0\n" | 
|  | "	srl	%0,28\n" | 
|  | "1:\n" | 
|  | EX_TABLE(0b, 1b) | 
|  | : "+d" (cc), "+d" (__fc), "+d" (__schid), "+d" (__mask) | 
|  | : : "cc", "memory"); | 
|  | *bb = ((unsigned int) __fc) >> 31; | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq) | 
|  | { | 
|  | char dbf_text[15]; | 
|  |  | 
|  | /* all done or next buffer state different */ | 
|  | if (ccq == 0 || ccq == 32) | 
|  | return 0; | 
|  | /* not all buffers processed */ | 
|  | if (ccq == 96 || ccq == 97) | 
|  | return 1; | 
|  | /* notify devices immediately */ | 
|  | sprintf(dbf_text, "%d", ccq); | 
|  | QDIO_DBF_TEXT2(1, trace, dbf_text); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qdio_do_eqbs - extract buffer states for QEBSM | 
|  | * @q: queue to manipulate | 
|  | * @state: state of the extracted buffers | 
|  | * @start: buffer number to start at | 
|  | * @count: count of buffers to examine | 
|  | * | 
|  | * Returns the number of successfull extracted equal buffer states. | 
|  | * Stops processing if a state is different from the last buffers state. | 
|  | */ | 
|  | static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, | 
|  | int start, int count) | 
|  | { | 
|  | unsigned int ccq = 0; | 
|  | int tmp_count = count, tmp_start = start; | 
|  | int nr = q->nr; | 
|  | int rc; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | BUG_ON(!q->irq_ptr->sch_token); | 
|  |  | 
|  | if (!q->is_input_q) | 
|  | nr += q->irq_ptr->nr_input_qs; | 
|  | again: | 
|  | ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); | 
|  | rc = qdio_check_ccq(q, ccq); | 
|  |  | 
|  | /* At least one buffer was processed, return and extract the remaining | 
|  | * buffers later. | 
|  | */ | 
|  | if ((ccq == 96) && (count != tmp_count)) | 
|  | return (count - tmp_count); | 
|  | if (rc == 1) { | 
|  | QDIO_DBF_TEXT5(1, trace, "eqAGAIN"); | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | if (rc < 0) { | 
|  | QDIO_DBF_TEXT2(1, trace, "eqberr"); | 
|  | sprintf(dbf_text, "%2x,%2x,%d,%d", count, tmp_count, ccq, nr); | 
|  | QDIO_DBF_TEXT2(1, trace, dbf_text); | 
|  | q->handler(q->irq_ptr->cdev, | 
|  | QDIO_ERROR_ACTIVATE_CHECK_CONDITION, | 
|  | 0, -1, -1, q->irq_ptr->int_parm); | 
|  | return 0; | 
|  | } | 
|  | return count - tmp_count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qdio_do_sqbs - set buffer states for QEBSM | 
|  | * @q: queue to manipulate | 
|  | * @state: new state of the buffers | 
|  | * @start: first buffer number to change | 
|  | * @count: how many buffers to change | 
|  | * | 
|  | * Returns the number of successfully changed buffers. | 
|  | * Does retrying until the specified count of buffer states is set or an | 
|  | * error occurs. | 
|  | */ | 
|  | static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, | 
|  | int count) | 
|  | { | 
|  | unsigned int ccq = 0; | 
|  | int tmp_count = count, tmp_start = start; | 
|  | int nr = q->nr; | 
|  | int rc; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | BUG_ON(!q->irq_ptr->sch_token); | 
|  |  | 
|  | if (!q->is_input_q) | 
|  | nr += q->irq_ptr->nr_input_qs; | 
|  | again: | 
|  | ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); | 
|  | rc = qdio_check_ccq(q, ccq); | 
|  | if (rc == 1) { | 
|  | QDIO_DBF_TEXT5(1, trace, "sqAGAIN"); | 
|  | goto again; | 
|  | } | 
|  | if (rc < 0) { | 
|  | QDIO_DBF_TEXT3(1, trace, "sqberr"); | 
|  | sprintf(dbf_text, "%2x,%2x", count, tmp_count); | 
|  | QDIO_DBF_TEXT3(1, trace, dbf_text); | 
|  | sprintf(dbf_text, "%d,%d", ccq, nr); | 
|  | QDIO_DBF_TEXT3(1, trace, dbf_text); | 
|  |  | 
|  | q->handler(q->irq_ptr->cdev, | 
|  | QDIO_ERROR_ACTIVATE_CHECK_CONDITION, | 
|  | 0, -1, -1, q->irq_ptr->int_parm); | 
|  | return 0; | 
|  | } | 
|  | WARN_ON(tmp_count); | 
|  | return count - tmp_count; | 
|  | } | 
|  |  | 
|  | /* returns number of examined buffers and their common state in *state */ | 
|  | static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, | 
|  | unsigned char *state, unsigned int count) | 
|  | { | 
|  | unsigned char __state = 0; | 
|  | int i; | 
|  |  | 
|  | BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); | 
|  | BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); | 
|  |  | 
|  | if (is_qebsm(q)) | 
|  | return qdio_do_eqbs(q, state, bufnr, count); | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | if (!__state) | 
|  | __state = q->slsb.val[bufnr]; | 
|  | else if (q->slsb.val[bufnr] != __state) | 
|  | break; | 
|  | bufnr = next_buf(bufnr); | 
|  | } | 
|  | *state = __state; | 
|  | return i; | 
|  | } | 
|  |  | 
|  | inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, | 
|  | unsigned char *state) | 
|  | { | 
|  | return get_buf_states(q, bufnr, state, 1); | 
|  | } | 
|  |  | 
|  | /* wrap-around safe setting of slsb states, returns number of changed buffers */ | 
|  | static inline int set_buf_states(struct qdio_q *q, int bufnr, | 
|  | unsigned char state, int count) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); | 
|  | BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); | 
|  |  | 
|  | if (is_qebsm(q)) | 
|  | return qdio_do_sqbs(q, state, bufnr, count); | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | xchg(&q->slsb.val[bufnr], state); | 
|  | bufnr = next_buf(bufnr); | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static inline int set_buf_state(struct qdio_q *q, int bufnr, | 
|  | unsigned char state) | 
|  | { | 
|  | return set_buf_states(q, bufnr, state, 1); | 
|  | } | 
|  |  | 
|  | /* set slsb states to initial state */ | 
|  | void qdio_init_buf_states(struct qdio_irq *irq_ptr) | 
|  | { | 
|  | struct qdio_q *q; | 
|  | int i; | 
|  |  | 
|  | for_each_input_queue(irq_ptr, q, i) | 
|  | set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT, | 
|  | QDIO_MAX_BUFFERS_PER_Q); | 
|  | for_each_output_queue(irq_ptr, q, i) | 
|  | set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT, | 
|  | QDIO_MAX_BUFFERS_PER_Q); | 
|  | } | 
|  |  | 
|  | static int qdio_siga_sync(struct qdio_q *q, unsigned int output, | 
|  | unsigned int input) | 
|  | { | 
|  | int cc; | 
|  |  | 
|  | if (!need_siga_sync(q)) | 
|  | return 0; | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.siga_sync); | 
|  |  | 
|  | cc = do_siga_sync(q->irq_ptr->schid, output, input); | 
|  | if (cc) { | 
|  | QDIO_DBF_TEXT4(0, trace, "sigasync"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  | QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); | 
|  | } | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | inline int qdio_siga_sync_q(struct qdio_q *q) | 
|  | { | 
|  | if (q->is_input_q) | 
|  | return qdio_siga_sync(q, 0, q->mask); | 
|  | else | 
|  | return qdio_siga_sync(q, q->mask, 0); | 
|  | } | 
|  |  | 
|  | static inline int qdio_siga_sync_out(struct qdio_q *q) | 
|  | { | 
|  | return qdio_siga_sync(q, ~0U, 0); | 
|  | } | 
|  |  | 
|  | static inline int qdio_siga_sync_all(struct qdio_q *q) | 
|  | { | 
|  | return qdio_siga_sync(q, ~0U, ~0U); | 
|  | } | 
|  |  | 
|  | static inline int qdio_do_siga_output(struct qdio_q *q, unsigned int *busy_bit) | 
|  | { | 
|  | unsigned int fc = 0; | 
|  | unsigned long schid; | 
|  |  | 
|  | if (q->u.out.use_enh_siga) { | 
|  | fc = 3; | 
|  | } | 
|  | if (!is_qebsm(q)) | 
|  | schid = *((u32 *)&q->irq_ptr->schid); | 
|  | else { | 
|  | schid = q->irq_ptr->sch_token; | 
|  | fc |= 0x80; | 
|  | } | 
|  | return do_siga_output(schid, q->mask, busy_bit, fc); | 
|  | } | 
|  |  | 
|  | static int qdio_siga_output(struct qdio_q *q) | 
|  | { | 
|  | int cc; | 
|  | u32 busy_bit; | 
|  | u64 start_time = 0; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | QDIO_DBF_TEXT5(0, trace, "sigaout"); | 
|  | QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.siga_out); | 
|  | again: | 
|  | cc = qdio_do_siga_output(q, &busy_bit); | 
|  | if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) { | 
|  | sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  |  | 
|  | if (!start_time) | 
|  | start_time = get_usecs(); | 
|  | else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE) | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | if (cc == 2 && busy_bit) | 
|  | cc |= QDIO_ERROR_SIGA_BUSY; | 
|  | if (cc) | 
|  | QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | static inline int qdio_siga_input(struct qdio_q *q) | 
|  | { | 
|  | int cc; | 
|  |  | 
|  | QDIO_DBF_TEXT4(0, trace, "sigain"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.siga_in); | 
|  |  | 
|  | cc = do_siga_input(q->irq_ptr->schid, q->mask); | 
|  | if (cc) | 
|  | QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); | 
|  | return cc; | 
|  | } | 
|  |  | 
|  | /* called from thinint inbound handler */ | 
|  | void qdio_sync_after_thinint(struct qdio_q *q) | 
|  | { | 
|  | if (pci_out_supported(q)) { | 
|  | if (need_siga_sync_thinint(q)) | 
|  | qdio_siga_sync_all(q); | 
|  | else if (need_siga_sync_out_thinint(q)) | 
|  | qdio_siga_sync_out(q); | 
|  | } else | 
|  | qdio_siga_sync_q(q); | 
|  | } | 
|  |  | 
|  | inline void qdio_stop_polling(struct qdio_q *q) | 
|  | { | 
|  | spin_lock_bh(&q->u.in.lock); | 
|  | if (!q->u.in.polling) { | 
|  | spin_unlock_bh(&q->u.in.lock); | 
|  | return; | 
|  | } | 
|  | q->u.in.polling = 0; | 
|  | qdio_perf_stat_inc(&perf_stats.debug_stop_polling); | 
|  |  | 
|  | /* show the card that we are not polling anymore */ | 
|  | set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); | 
|  | spin_unlock_bh(&q->u.in.lock); | 
|  | } | 
|  |  | 
|  | static void announce_buffer_error(struct qdio_q *q) | 
|  | { | 
|  | char dbf_text[15]; | 
|  |  | 
|  | if (q->is_input_q) | 
|  | QDIO_DBF_TEXT3(1, trace, "inperr"); | 
|  | else | 
|  | QDIO_DBF_TEXT3(0, trace, "outperr"); | 
|  |  | 
|  | sprintf(dbf_text, "%x-%x-%x", q->first_to_check, | 
|  | q->sbal[q->first_to_check]->element[14].flags, | 
|  | q->sbal[q->first_to_check]->element[15].flags); | 
|  | QDIO_DBF_TEXT3(1, trace, dbf_text); | 
|  | QDIO_DBF_HEX2(1, trace, q->sbal[q->first_to_check], 256); | 
|  |  | 
|  | q->qdio_error = QDIO_ERROR_SLSB_STATE; | 
|  | } | 
|  |  | 
|  | static int get_inbound_buffer_frontier(struct qdio_q *q) | 
|  | { | 
|  | int count, stop; | 
|  | unsigned char state; | 
|  |  | 
|  | /* | 
|  | * If we still poll don't update last_move_ftc, keep the | 
|  | * previously ACK buffer there. | 
|  | */ | 
|  | if (!q->u.in.polling) | 
|  | q->last_move_ftc = q->first_to_check; | 
|  |  | 
|  | /* | 
|  | * Don't check 128 buffers, as otherwise qdio_inbound_q_moved | 
|  | * would return 0. | 
|  | */ | 
|  | count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); | 
|  | stop = add_buf(q->first_to_check, count); | 
|  |  | 
|  | /* | 
|  | * No siga sync here, as a PCI or we after a thin interrupt | 
|  | * will sync the queues. | 
|  | */ | 
|  |  | 
|  | /* need to set count to 1 for non-qebsm */ | 
|  | if (!is_qebsm(q)) | 
|  | count = 1; | 
|  |  | 
|  | check_next: | 
|  | if (q->first_to_check == stop) | 
|  | goto out; | 
|  |  | 
|  | count = get_buf_states(q, q->first_to_check, &state, count); | 
|  | if (!count) | 
|  | goto out; | 
|  |  | 
|  | switch (state) { | 
|  | case SLSB_P_INPUT_PRIMED: | 
|  | QDIO_DBF_TEXT5(0, trace, "inptprim"); | 
|  |  | 
|  | /* | 
|  | * Only ACK the first buffer. The ACK will be removed in | 
|  | * qdio_stop_polling. | 
|  | */ | 
|  | if (q->u.in.polling) | 
|  | state = SLSB_P_INPUT_NOT_INIT; | 
|  | else { | 
|  | q->u.in.polling = 1; | 
|  | state = SLSB_P_INPUT_ACK; | 
|  | } | 
|  | set_buf_state(q, q->first_to_check, state); | 
|  |  | 
|  | /* | 
|  | * Need to change all PRIMED buffers to NOT_INIT, otherwise | 
|  | * we're loosing initiative in the thinint code. | 
|  | */ | 
|  | if (count > 1) | 
|  | set_buf_states(q, next_buf(q->first_to_check), | 
|  | SLSB_P_INPUT_NOT_INIT, count - 1); | 
|  |  | 
|  | /* | 
|  | * No siga-sync needed for non-qebsm here, as the inbound queue | 
|  | * will be synced on the next siga-r, resp. | 
|  | * tiqdio_is_inbound_q_done will do the siga-sync. | 
|  | */ | 
|  | q->first_to_check = add_buf(q->first_to_check, count); | 
|  | atomic_sub(count, &q->nr_buf_used); | 
|  | goto check_next; | 
|  | case SLSB_P_INPUT_ERROR: | 
|  | announce_buffer_error(q); | 
|  | /* process the buffer, the upper layer will take care of it */ | 
|  | q->first_to_check = add_buf(q->first_to_check, count); | 
|  | atomic_sub(count, &q->nr_buf_used); | 
|  | break; | 
|  | case SLSB_CU_INPUT_EMPTY: | 
|  | case SLSB_P_INPUT_NOT_INIT: | 
|  | case SLSB_P_INPUT_ACK: | 
|  | QDIO_DBF_TEXT5(0, trace, "inpnipro"); | 
|  | break; | 
|  | default: | 
|  | BUG(); | 
|  | } | 
|  | out: | 
|  | QDIO_DBF_HEX4(0, trace, &q->first_to_check, sizeof(int)); | 
|  | return q->first_to_check; | 
|  | } | 
|  |  | 
|  | int qdio_inbound_q_moved(struct qdio_q *q) | 
|  | { | 
|  | int bufnr; | 
|  |  | 
|  | bufnr = get_inbound_buffer_frontier(q); | 
|  |  | 
|  | if ((bufnr != q->last_move_ftc) || q->qdio_error) { | 
|  | if (!need_siga_sync(q) && !pci_out_supported(q)) | 
|  | q->u.in.timestamp = get_usecs(); | 
|  |  | 
|  | QDIO_DBF_TEXT4(0, trace, "inhasmvd"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  | return 1; | 
|  | } else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qdio_inbound_q_done(struct qdio_q *q) | 
|  | { | 
|  | unsigned char state; | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[15]; | 
|  | #endif | 
|  |  | 
|  | if (!atomic_read(&q->nr_buf_used)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * We need that one for synchronization with the adapter, as it | 
|  | * does a kind of PCI avoidance. | 
|  | */ | 
|  | qdio_siga_sync_q(q); | 
|  |  | 
|  | get_buf_state(q, q->first_to_check, &state); | 
|  | if (state == SLSB_P_INPUT_PRIMED) | 
|  | /* we got something to do */ | 
|  | return 0; | 
|  |  | 
|  | /* on VM, we don't poll, so the q is always done here */ | 
|  | if (need_siga_sync(q) || pci_out_supported(q)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * At this point we know, that inbound first_to_check | 
|  | * has (probably) not moved (see qdio_inbound_processing). | 
|  | */ | 
|  | if (get_usecs() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) { | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | QDIO_DBF_TEXT4(0, trace, "inqisdon"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  | sprintf(dbf_text, "pf%02x", q->first_to_check); | 
|  | QDIO_DBF_TEXT4(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  | return 1; | 
|  | } else { | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | QDIO_DBF_TEXT4(0, trace, "inqisntd"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  | sprintf(dbf_text, "pf%02x", q->first_to_check); | 
|  | QDIO_DBF_TEXT4(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | void qdio_kick_inbound_handler(struct qdio_q *q) | 
|  | { | 
|  | int count, start, end; | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[15]; | 
|  | #endif | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.inbound_handler); | 
|  |  | 
|  | start = q->first_to_kick; | 
|  | end = q->first_to_check; | 
|  | if (end >= start) | 
|  | count = end - start; | 
|  | else | 
|  | count = end + QDIO_MAX_BUFFERS_PER_Q - start; | 
|  |  | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | sprintf(dbf_text, "s=%2xc=%2x", start, count); | 
|  | QDIO_DBF_TEXT4(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) | 
|  | return; | 
|  |  | 
|  | q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, | 
|  | start, count, q->irq_ptr->int_parm); | 
|  |  | 
|  | /* for the next time */ | 
|  | q->first_to_kick = q->first_to_check; | 
|  | q->qdio_error = 0; | 
|  | } | 
|  |  | 
|  | static void __qdio_inbound_processing(struct qdio_q *q) | 
|  | { | 
|  | qdio_perf_stat_inc(&perf_stats.tasklet_inbound); | 
|  | again: | 
|  | if (!qdio_inbound_q_moved(q)) | 
|  | return; | 
|  |  | 
|  | qdio_kick_inbound_handler(q); | 
|  |  | 
|  | if (!qdio_inbound_q_done(q)) | 
|  | /* means poll time is not yet over */ | 
|  | goto again; | 
|  |  | 
|  | qdio_stop_polling(q); | 
|  | /* | 
|  | * We need to check again to not lose initiative after | 
|  | * resetting the ACK state. | 
|  | */ | 
|  | if (!qdio_inbound_q_done(q)) | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | /* inbound tasklet */ | 
|  | void qdio_inbound_processing(unsigned long data) | 
|  | { | 
|  | struct qdio_q *q = (struct qdio_q *)data; | 
|  | __qdio_inbound_processing(q); | 
|  | } | 
|  |  | 
|  | static int get_outbound_buffer_frontier(struct qdio_q *q) | 
|  | { | 
|  | int count, stop; | 
|  | unsigned char state; | 
|  |  | 
|  | if (((queue_type(q) != QDIO_IQDIO_QFMT) && !pci_out_supported(q)) || | 
|  | (queue_type(q) == QDIO_IQDIO_QFMT && multicast_outbound(q))) | 
|  | qdio_siga_sync_q(q); | 
|  |  | 
|  | /* | 
|  | * Don't check 128 buffers, as otherwise qdio_inbound_q_moved | 
|  | * would return 0. | 
|  | */ | 
|  | count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); | 
|  | stop = add_buf(q->first_to_check, count); | 
|  |  | 
|  | /* need to set count to 1 for non-qebsm */ | 
|  | if (!is_qebsm(q)) | 
|  | count = 1; | 
|  |  | 
|  | check_next: | 
|  | if (q->first_to_check == stop) | 
|  | return q->first_to_check; | 
|  |  | 
|  | count = get_buf_states(q, q->first_to_check, &state, count); | 
|  | if (!count) | 
|  | return q->first_to_check; | 
|  |  | 
|  | switch (state) { | 
|  | case SLSB_P_OUTPUT_EMPTY: | 
|  | /* the adapter got it */ | 
|  | QDIO_DBF_TEXT5(0, trace, "outpempt"); | 
|  |  | 
|  | atomic_sub(count, &q->nr_buf_used); | 
|  | q->first_to_check = add_buf(q->first_to_check, count); | 
|  | /* | 
|  | * We fetch all buffer states at once. get_buf_states may | 
|  | * return count < stop. For QEBSM we do not loop. | 
|  | */ | 
|  | if (is_qebsm(q)) | 
|  | break; | 
|  | goto check_next; | 
|  | case SLSB_P_OUTPUT_ERROR: | 
|  | announce_buffer_error(q); | 
|  | /* process the buffer, the upper layer will take care of it */ | 
|  | q->first_to_check = add_buf(q->first_to_check, count); | 
|  | atomic_sub(count, &q->nr_buf_used); | 
|  | break; | 
|  | case SLSB_CU_OUTPUT_PRIMED: | 
|  | /* the adapter has not fetched the output yet */ | 
|  | QDIO_DBF_TEXT5(0, trace, "outpprim"); | 
|  | break; | 
|  | case SLSB_P_OUTPUT_NOT_INIT: | 
|  | case SLSB_P_OUTPUT_HALTED: | 
|  | break; | 
|  | default: | 
|  | BUG(); | 
|  | } | 
|  | return q->first_to_check; | 
|  | } | 
|  |  | 
|  | /* all buffers processed? */ | 
|  | static inline int qdio_outbound_q_done(struct qdio_q *q) | 
|  | { | 
|  | return atomic_read(&q->nr_buf_used) == 0; | 
|  | } | 
|  |  | 
|  | static inline int qdio_outbound_q_moved(struct qdio_q *q) | 
|  | { | 
|  | int bufnr; | 
|  |  | 
|  | bufnr = get_outbound_buffer_frontier(q); | 
|  |  | 
|  | if ((bufnr != q->last_move_ftc) || q->qdio_error) { | 
|  | q->last_move_ftc = bufnr; | 
|  | QDIO_DBF_TEXT4(0, trace, "oqhasmvd"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  | return 1; | 
|  | } else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * VM could present us cc=2 and busy bit set on SIGA-write | 
|  | * during reconfiguration of their Guest LAN (only in iqdio mode, | 
|  | * otherwise qdio is asynchronous and cc=2 and busy bit there will take | 
|  | * the queues down immediately). | 
|  | * | 
|  | * Therefore qdio_siga_output will try for a short time constantly, | 
|  | * if such a condition occurs. If it doesn't change, it will | 
|  | * increase the busy_siga_counter and save the timestamp, and | 
|  | * schedule the queue for later processing. qdio_outbound_processing | 
|  | * will check out the counter. If non-zero, it will call qdio_kick_outbound_q | 
|  | * as often as the value of the counter. This will attempt further SIGA | 
|  | * instructions. For each successful SIGA, the counter is | 
|  | * decreased, for failing SIGAs the counter remains the same, after | 
|  | * all. After some time of no movement, qdio_kick_outbound_q will | 
|  | * finally fail and reflect corresponding error codes to call | 
|  | * the upper layer module and have it take the queues down. | 
|  | * | 
|  | * Note that this is a change from the original HiperSockets design | 
|  | * (saying cc=2 and busy bit means take the queues down), but in | 
|  | * these days Guest LAN didn't exist... excessive cc=2 with busy bit | 
|  | * conditions will still take the queues down, but the threshold is | 
|  | * higher due to the Guest LAN environment. | 
|  | * | 
|  | * Called from outbound tasklet and do_QDIO handler. | 
|  | */ | 
|  | static void qdio_kick_outbound_q(struct qdio_q *q) | 
|  | { | 
|  | int rc; | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[15]; | 
|  |  | 
|  | QDIO_DBF_TEXT5(0, trace, "kickoutq"); | 
|  | QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | if (!need_siga_out(q)) | 
|  | return; | 
|  |  | 
|  | rc = qdio_siga_output(q); | 
|  | switch (rc) { | 
|  | case 0: | 
|  | /* TODO: improve error handling for CC=0 case */ | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | if (q->u.out.timestamp) { | 
|  | QDIO_DBF_TEXT3(0, trace, "cc2reslv"); | 
|  | sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, | 
|  | q->nr, | 
|  | atomic_read(&q->u.out.busy_siga_counter)); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  | } | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  | /* went smooth this time, reset timestamp */ | 
|  | q->u.out.timestamp = 0; | 
|  | break; | 
|  | /* cc=2 and busy bit */ | 
|  | case (2 | QDIO_ERROR_SIGA_BUSY): | 
|  | atomic_inc(&q->u.out.busy_siga_counter); | 
|  |  | 
|  | /* if the last siga was successful, save timestamp here */ | 
|  | if (!q->u.out.timestamp) | 
|  | q->u.out.timestamp = get_usecs(); | 
|  |  | 
|  | /* if we're in time, don't touch qdio_error */ | 
|  | if (get_usecs() - q->u.out.timestamp < QDIO_BUSY_BIT_GIVE_UP) { | 
|  | tasklet_schedule(&q->tasklet); | 
|  | break; | 
|  | } | 
|  | QDIO_DBF_TEXT2(0, trace, "cc2REPRT"); | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr, | 
|  | atomic_read(&q->u.out.busy_siga_counter)); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  | default: | 
|  | /* for plain cc=1, 2 or 3 */ | 
|  | q->qdio_error = rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qdio_kick_outbound_handler(struct qdio_q *q) | 
|  | { | 
|  | int start, end, count; | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[15]; | 
|  | #endif | 
|  |  | 
|  | start = q->first_to_kick; | 
|  | end = q->last_move_ftc; | 
|  | if (end >= start) | 
|  | count = end - start; | 
|  | else | 
|  | count = end + QDIO_MAX_BUFFERS_PER_Q - start; | 
|  |  | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | QDIO_DBF_TEXT4(0, trace, "kickouth"); | 
|  | QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); | 
|  |  | 
|  | sprintf(dbf_text, "s=%2xc=%2x", start, count); | 
|  | QDIO_DBF_TEXT4(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) | 
|  | return; | 
|  |  | 
|  | q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count, | 
|  | q->irq_ptr->int_parm); | 
|  |  | 
|  | /* for the next time: */ | 
|  | q->first_to_kick = q->last_move_ftc; | 
|  | q->qdio_error = 0; | 
|  | } | 
|  |  | 
|  | static void __qdio_outbound_processing(struct qdio_q *q) | 
|  | { | 
|  | int siga_attempts; | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.tasklet_outbound); | 
|  |  | 
|  | /* see comment in qdio_kick_outbound_q */ | 
|  | siga_attempts = atomic_read(&q->u.out.busy_siga_counter); | 
|  | while (siga_attempts--) { | 
|  | atomic_dec(&q->u.out.busy_siga_counter); | 
|  | qdio_kick_outbound_q(q); | 
|  | } | 
|  |  | 
|  | BUG_ON(atomic_read(&q->nr_buf_used) < 0); | 
|  |  | 
|  | if (qdio_outbound_q_moved(q)) | 
|  | qdio_kick_outbound_handler(q); | 
|  |  | 
|  | if (queue_type(q) == QDIO_ZFCP_QFMT) { | 
|  | if (!pci_out_supported(q) && !qdio_outbound_q_done(q)) | 
|  | tasklet_schedule(&q->tasklet); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* bail out for HiperSockets unicast queues */ | 
|  | if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) | 
|  | return; | 
|  |  | 
|  | if ((queue_type(q) == QDIO_IQDIO_QFMT) && | 
|  | (atomic_read(&q->nr_buf_used)) > QDIO_IQDIO_POLL_LVL) { | 
|  | tasklet_schedule(&q->tasklet); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (q->u.out.pci_out_enabled) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Now we know that queue type is either qeth without pci enabled | 
|  | * or HiperSockets multicast. Make sure buffer switch from PRIMED to | 
|  | * EMPTY is noticed and outbound_handler is called after some time. | 
|  | */ | 
|  | if (qdio_outbound_q_done(q)) | 
|  | del_timer(&q->u.out.timer); | 
|  | else { | 
|  | if (!timer_pending(&q->u.out.timer)) { | 
|  | mod_timer(&q->u.out.timer, jiffies + 10 * HZ); | 
|  | qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* outbound tasklet */ | 
|  | void qdio_outbound_processing(unsigned long data) | 
|  | { | 
|  | struct qdio_q *q = (struct qdio_q *)data; | 
|  | __qdio_outbound_processing(q); | 
|  | } | 
|  |  | 
|  | void qdio_outbound_timer(unsigned long data) | 
|  | { | 
|  | struct qdio_q *q = (struct qdio_q *)data; | 
|  | tasklet_schedule(&q->tasklet); | 
|  | } | 
|  |  | 
|  | /* called from thinint inbound tasklet */ | 
|  | void qdio_check_outbound_after_thinint(struct qdio_q *q) | 
|  | { | 
|  | struct qdio_q *out; | 
|  | int i; | 
|  |  | 
|  | if (!pci_out_supported(q)) | 
|  | return; | 
|  |  | 
|  | for_each_output_queue(q->irq_ptr, out, i) | 
|  | if (!qdio_outbound_q_done(out)) | 
|  | tasklet_schedule(&out->tasklet); | 
|  | } | 
|  |  | 
|  | static inline void qdio_set_state(struct qdio_irq *irq_ptr, | 
|  | enum qdio_irq_states state) | 
|  | { | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[15]; | 
|  |  | 
|  | QDIO_DBF_TEXT5(0, trace, "newstate"); | 
|  | sprintf(dbf_text, "%4x%4x", irq_ptr->schid.sch_no, state); | 
|  | QDIO_DBF_TEXT5(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | irq_ptr->state = state; | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | static void qdio_irq_check_sense(struct subchannel_id schid, struct irb *irb) | 
|  | { | 
|  | char dbf_text[15]; | 
|  |  | 
|  | if (irb->esw.esw0.erw.cons) { | 
|  | sprintf(dbf_text, "sens%4x", schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, trace, dbf_text); | 
|  | QDIO_DBF_HEX0(0, trace, irb, 64); | 
|  | QDIO_DBF_HEX0(0, trace, irb->ecw, 64); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* PCI interrupt handler */ | 
|  | static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) | 
|  | { | 
|  | int i; | 
|  | struct qdio_q *q; | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.pci_int); | 
|  |  | 
|  | for_each_input_queue(irq_ptr, q, i) | 
|  | tasklet_schedule(&q->tasklet); | 
|  |  | 
|  | if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) | 
|  | return; | 
|  |  | 
|  | for_each_output_queue(irq_ptr, q, i) { | 
|  | if (qdio_outbound_q_done(q)) | 
|  | continue; | 
|  |  | 
|  | if (!siga_syncs_out_pci(q)) | 
|  | qdio_siga_sync_q(q); | 
|  |  | 
|  | tasklet_schedule(&q->tasklet); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qdio_handle_activate_check(struct ccw_device *cdev, | 
|  | unsigned long intparm, int cstat, int dstat) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  | struct qdio_q *q; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | QDIO_DBF_TEXT2(1, trace, "ick2"); | 
|  | sprintf(dbf_text, "%s", dev_name(&cdev->dev)); | 
|  | QDIO_DBF_TEXT2(1, trace, dbf_text); | 
|  | QDIO_DBF_HEX2(0, trace, &intparm, sizeof(int)); | 
|  | QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); | 
|  | QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); | 
|  |  | 
|  | if (irq_ptr->nr_input_qs) { | 
|  | q = irq_ptr->input_qs[0]; | 
|  | } else if (irq_ptr->nr_output_qs) { | 
|  | q = irq_ptr->output_qs[0]; | 
|  | } else { | 
|  | dump_stack(); | 
|  | goto no_handler; | 
|  | } | 
|  | q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, | 
|  | 0, -1, -1, irq_ptr->int_parm); | 
|  | no_handler: | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); | 
|  | } | 
|  |  | 
|  | static void qdio_call_shutdown(struct work_struct *work) | 
|  | { | 
|  | struct ccw_device_private *priv; | 
|  | struct ccw_device *cdev; | 
|  |  | 
|  | priv = container_of(work, struct ccw_device_private, kick_work); | 
|  | cdev = priv->cdev; | 
|  | qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); | 
|  | put_device(&cdev->dev); | 
|  | } | 
|  |  | 
|  | static void qdio_int_error(struct ccw_device *cdev) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  |  | 
|  | switch (irq_ptr->state) { | 
|  | case QDIO_IRQ_STATE_INACTIVE: | 
|  | case QDIO_IRQ_STATE_CLEANUP: | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); | 
|  | break; | 
|  | case QDIO_IRQ_STATE_ESTABLISHED: | 
|  | case QDIO_IRQ_STATE_ACTIVE: | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); | 
|  | if (get_device(&cdev->dev)) { | 
|  | /* Can't call shutdown from interrupt context. */ | 
|  | PREPARE_WORK(&cdev->private->kick_work, | 
|  | qdio_call_shutdown); | 
|  | queue_work(ccw_device_work, &cdev->private->kick_work); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | } | 
|  | wake_up(&cdev->private->wait_q); | 
|  | } | 
|  |  | 
|  | static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat, | 
|  | int dstat) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  |  | 
|  | if (cstat || (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) { | 
|  | QDIO_DBF_TEXT2(1, setup, "eq:ckcon"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (!(dstat & DEV_STAT_DEV_END)) { | 
|  | QDIO_DBF_TEXT2(1, setup, "eq:no de"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) { | 
|  | QDIO_DBF_TEXT2(1, setup, "eq:badio"); | 
|  | goto error; | 
|  | } | 
|  | return 0; | 
|  | error: | 
|  | QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); | 
|  | QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat, | 
|  | int dstat) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qehi%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  | QDIO_DBF_TEXT0(0, trace, dbf_text); | 
|  |  | 
|  | if (!qdio_establish_check_errors(cdev, cstat, dstat)) | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); | 
|  | } | 
|  |  | 
|  | /* qdio interrupt handler */ | 
|  | void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, | 
|  | struct irb *irb) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  | int cstat, dstat; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.qdio_int); | 
|  |  | 
|  | if (!intparm || !irq_ptr) { | 
|  | sprintf(dbf_text, "qihd%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(irb)) { | 
|  | switch (PTR_ERR(irb)) { | 
|  | case -EIO: | 
|  | sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | qdio_int_error(cdev); | 
|  | return; | 
|  | case -ETIMEDOUT: | 
|  | sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | qdio_int_error(cdev); | 
|  | return; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return; | 
|  | } | 
|  | } | 
|  | qdio_irq_check_sense(irq_ptr->schid, irb); | 
|  |  | 
|  | cstat = irb->scsw.cmd.cstat; | 
|  | dstat = irb->scsw.cmd.dstat; | 
|  |  | 
|  | switch (irq_ptr->state) { | 
|  | case QDIO_IRQ_STATE_INACTIVE: | 
|  | qdio_establish_handle_irq(cdev, cstat, dstat); | 
|  | break; | 
|  |  | 
|  | case QDIO_IRQ_STATE_CLEANUP: | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); | 
|  | break; | 
|  |  | 
|  | case QDIO_IRQ_STATE_ESTABLISHED: | 
|  | case QDIO_IRQ_STATE_ACTIVE: | 
|  | if (cstat & SCHN_STAT_PCI) { | 
|  | qdio_int_handler_pci(irq_ptr); | 
|  | /* no state change so no need to wake up wait_q */ | 
|  | return; | 
|  | } | 
|  | if ((cstat & ~SCHN_STAT_PCI) || dstat) { | 
|  | qdio_handle_activate_check(cdev, intparm, cstat, | 
|  | dstat); | 
|  | break; | 
|  | } | 
|  | default: | 
|  | WARN_ON(1); | 
|  | } | 
|  | wake_up(&cdev->private->wait_q); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qdio_get_ssqd_desc - get qdio subchannel description | 
|  | * @cdev: ccw device to get description for | 
|  | * | 
|  | * Returns a pointer to the saved qdio subchannel description, | 
|  | * or NULL for not setup qdio devices. | 
|  | */ | 
|  | struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return NULL; | 
|  |  | 
|  | return &irq_ptr->ssqd_desc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); | 
|  |  | 
|  | /** | 
|  | * qdio_cleanup - shutdown queues and free data structures | 
|  | * @cdev: associated ccw device | 
|  | * @how: use halt or clear to shutdown | 
|  | * | 
|  | * This function calls qdio_shutdown() for @cdev with method @how | 
|  | * and on success qdio_free() for @cdev. | 
|  | */ | 
|  | int qdio_cleanup(struct ccw_device *cdev, int how) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | char dbf_text[15]; | 
|  | int rc; | 
|  |  | 
|  | sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | rc = qdio_shutdown(cdev, how); | 
|  | if (rc == 0) | 
|  | rc = qdio_free(cdev); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_cleanup); | 
|  |  | 
|  | static void qdio_shutdown_queues(struct ccw_device *cdev) | 
|  | { | 
|  | struct qdio_irq *irq_ptr = cdev->private->qdio_data; | 
|  | struct qdio_q *q; | 
|  | int i; | 
|  |  | 
|  | for_each_input_queue(irq_ptr, q, i) | 
|  | tasklet_disable(&q->tasklet); | 
|  |  | 
|  | for_each_output_queue(irq_ptr, q, i) { | 
|  | tasklet_disable(&q->tasklet); | 
|  | del_timer(&q->u.out.timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qdio_shutdown - shut down a qdio subchannel | 
|  | * @cdev: associated ccw device | 
|  | * @how: use halt or clear to shutdown | 
|  | */ | 
|  | int qdio_shutdown(struct ccw_device *cdev, int how) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | int rc; | 
|  | unsigned long flags; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&irq_ptr->setup_mutex); | 
|  | /* | 
|  | * Subchannel was already shot down. We cannot prevent being called | 
|  | * twice since cio may trigger a shutdown asynchronously. | 
|  | */ | 
|  | if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | tiqdio_remove_input_queues(irq_ptr); | 
|  | qdio_shutdown_queues(cdev); | 
|  | qdio_shutdown_debug_entries(irq_ptr, cdev); | 
|  |  | 
|  | /* cleanup subchannel */ | 
|  | spin_lock_irqsave(get_ccwdev_lock(cdev), flags); | 
|  |  | 
|  | if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) | 
|  | rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); | 
|  | else | 
|  | /* default behaviour is halt */ | 
|  | rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); | 
|  | if (rc) { | 
|  | sprintf(dbf_text, "sher%4x", irq_ptr->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  | sprintf(dbf_text, "rc=%d", rc); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  | goto no_cleanup; | 
|  | } | 
|  |  | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); | 
|  | spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); | 
|  | wait_event_interruptible_timeout(cdev->private->wait_q, | 
|  | irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || | 
|  | irq_ptr->state == QDIO_IRQ_STATE_ERR, | 
|  | 10 * HZ); | 
|  | spin_lock_irqsave(get_ccwdev_lock(cdev), flags); | 
|  |  | 
|  | no_cleanup: | 
|  | qdio_shutdown_thinint(irq_ptr); | 
|  |  | 
|  | /* restore interrupt handler */ | 
|  | if ((void *)cdev->handler == (void *)qdio_int_handler) | 
|  | cdev->handler = irq_ptr->orig_handler; | 
|  | spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); | 
|  |  | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | if (rc) | 
|  | return rc; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_shutdown); | 
|  |  | 
|  | /** | 
|  | * qdio_free - free data structures for a qdio subchannel | 
|  | * @cdev: associated ccw device | 
|  | */ | 
|  | int qdio_free(struct ccw_device *cdev) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&irq_ptr->setup_mutex); | 
|  | cdev->private->qdio_data = NULL; | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  |  | 
|  | qdio_release_memory(irq_ptr); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_free); | 
|  |  | 
|  | /** | 
|  | * qdio_initialize - allocate and establish queues for a qdio subchannel | 
|  | * @init_data: initialization data | 
|  | * | 
|  | * This function first allocates queues via qdio_allocate() and on success | 
|  | * establishes them via qdio_establish(). | 
|  | */ | 
|  | int qdio_initialize(struct qdio_initialize *init_data) | 
|  | { | 
|  | int rc; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | rc = qdio_allocate(init_data); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = qdio_establish(init_data); | 
|  | if (rc) | 
|  | qdio_free(init_data->cdev); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_initialize); | 
|  |  | 
|  | /** | 
|  | * qdio_allocate - allocate qdio queues and associated data | 
|  | * @init_data: initialization data | 
|  | */ | 
|  | int qdio_allocate(struct qdio_initialize *init_data) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | char dbf_text[15]; | 
|  |  | 
|  | sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | if ((init_data->no_input_qs && !init_data->input_handler) || | 
|  | (init_data->no_output_qs && !init_data->output_handler)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) || | 
|  | (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((!init_data->input_sbal_addr_array) || | 
|  | (!init_data->output_sbal_addr_array)) | 
|  | return -EINVAL; | 
|  |  | 
|  | qdio_allocate_do_dbf(init_data); | 
|  |  | 
|  | /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */ | 
|  | irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!irq_ptr) | 
|  | goto out_err; | 
|  | QDIO_DBF_TEXT0(0, setup, "irq_ptr:"); | 
|  | QDIO_DBF_HEX0(0, setup, &irq_ptr, sizeof(void *)); | 
|  |  | 
|  | mutex_init(&irq_ptr->setup_mutex); | 
|  |  | 
|  | /* | 
|  | * Allocate a page for the chsc calls in qdio_establish. | 
|  | * Must be pre-allocated since a zfcp recovery will call | 
|  | * qdio_establish. In case of low memory and swap on a zfcp disk | 
|  | * we may not be able to allocate memory otherwise. | 
|  | */ | 
|  | irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL); | 
|  | if (!irq_ptr->chsc_page) | 
|  | goto out_rel; | 
|  |  | 
|  | /* qdr is used in ccw1.cda which is u32 */ | 
|  | irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!irq_ptr->qdr) | 
|  | goto out_rel; | 
|  | WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); | 
|  |  | 
|  | QDIO_DBF_TEXT0(0, setup, "qdr:"); | 
|  | QDIO_DBF_HEX0(0, setup, &irq_ptr->qdr, sizeof(void *)); | 
|  |  | 
|  | if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs, | 
|  | init_data->no_output_qs)) | 
|  | goto out_rel; | 
|  |  | 
|  | init_data->cdev->private->qdio_data = irq_ptr; | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); | 
|  | return 0; | 
|  | out_rel: | 
|  | qdio_release_memory(irq_ptr); | 
|  | out_err: | 
|  | return -ENOMEM; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_allocate); | 
|  |  | 
|  | /** | 
|  | * qdio_establish - establish queues on a qdio subchannel | 
|  | * @init_data: initialization data | 
|  | */ | 
|  | int qdio_establish(struct qdio_initialize *init_data) | 
|  | { | 
|  | char dbf_text[20]; | 
|  | struct qdio_irq *irq_ptr; | 
|  | struct ccw_device *cdev = init_data->cdev; | 
|  | unsigned long saveflags; | 
|  | int rc; | 
|  |  | 
|  | sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (cdev->private->state != DEV_STATE_ONLINE) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&irq_ptr->setup_mutex); | 
|  | qdio_setup_irq(init_data); | 
|  |  | 
|  | rc = qdio_establish_thinint(irq_ptr); | 
|  | if (rc) { | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* establish q */ | 
|  | irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd; | 
|  | irq_ptr->ccw.flags = CCW_FLAG_SLI; | 
|  | irq_ptr->ccw.count = irq_ptr->equeue.count; | 
|  | irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); | 
|  |  | 
|  | spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); | 
|  | ccw_device_set_options_mask(cdev, 0); | 
|  |  | 
|  | rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); | 
|  | if (rc) { | 
|  | sprintf(dbf_text, "eq:io%4x", irq_ptr->schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | sprintf(dbf_text, "eq:rc%4x", rc); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | } | 
|  | spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); | 
|  |  | 
|  | if (rc) { | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | wait_event_interruptible_timeout(cdev->private->wait_q, | 
|  | irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || | 
|  | irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ); | 
|  |  | 
|  | if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) { | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | qdio_setup_ssqd_info(irq_ptr); | 
|  | sprintf(dbf_text, "qDmmwc%2x", irq_ptr->ssqd_desc.mmwc); | 
|  | QDIO_DBF_TEXT2(0, setup, dbf_text); | 
|  | sprintf(dbf_text, "qib ac%2x", irq_ptr->qib.ac); | 
|  | QDIO_DBF_TEXT2(0, setup, dbf_text); | 
|  |  | 
|  | /* qebsm is now setup if available, initialize buffer states */ | 
|  | qdio_init_buf_states(irq_ptr); | 
|  |  | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | qdio_print_subchannel_info(irq_ptr, cdev); | 
|  | qdio_setup_debug_entries(irq_ptr, cdev); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_establish); | 
|  |  | 
|  | /** | 
|  | * qdio_activate - activate queues on a qdio subchannel | 
|  | * @cdev: associated cdev | 
|  | */ | 
|  | int qdio_activate(struct ccw_device *cdev) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | int rc; | 
|  | unsigned long saveflags; | 
|  | char dbf_text[20]; | 
|  |  | 
|  | sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT0(0, setup, dbf_text); | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (cdev->private->state != DEV_STATE_ONLINE) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&irq_ptr->setup_mutex); | 
|  | if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { | 
|  | rc = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd; | 
|  | irq_ptr->ccw.flags = CCW_FLAG_SLI; | 
|  | irq_ptr->ccw.count = irq_ptr->aqueue.count; | 
|  | irq_ptr->ccw.cda = 0; | 
|  |  | 
|  | spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); | 
|  | ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); | 
|  |  | 
|  | rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, | 
|  | 0, DOIO_DENY_PREFETCH); | 
|  | if (rc) { | 
|  | sprintf(dbf_text, "aq:io%4x", irq_ptr->schid.sch_no); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | sprintf(dbf_text, "aq:rc%4x", rc); | 
|  | QDIO_DBF_TEXT2(1, setup, dbf_text); | 
|  | } | 
|  | spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); | 
|  |  | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | if (is_thinint_irq(irq_ptr)) | 
|  | tiqdio_add_input_queues(irq_ptr); | 
|  |  | 
|  | /* wait for subchannel to become active */ | 
|  | msleep(5); | 
|  |  | 
|  | switch (irq_ptr->state) { | 
|  | case QDIO_IRQ_STATE_STOPPED: | 
|  | case QDIO_IRQ_STATE_ERR: | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); | 
|  | return -EIO; | 
|  | default: | 
|  | qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); | 
|  | rc = 0; | 
|  | } | 
|  | out: | 
|  | mutex_unlock(&irq_ptr->setup_mutex); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(qdio_activate); | 
|  |  | 
|  | static inline int buf_in_between(int bufnr, int start, int count) | 
|  | { | 
|  | int end = add_buf(start, count); | 
|  |  | 
|  | if (end > start) { | 
|  | if (bufnr >= start && bufnr < end) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* wrap-around case */ | 
|  | if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) || | 
|  | (bufnr < end)) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * handle_inbound - reset processed input buffers | 
|  | * @q: queue containing the buffers | 
|  | * @callflags: flags | 
|  | * @bufnr: first buffer to process | 
|  | * @count: how many buffers are emptied | 
|  | */ | 
|  | static void handle_inbound(struct qdio_q *q, unsigned int callflags, | 
|  | int bufnr, int count) | 
|  | { | 
|  | unsigned long flags; | 
|  | int used, rc; | 
|  |  | 
|  | /* | 
|  | * do_QDIO could run in parallel with the queue tasklet so the | 
|  | * upper-layer programm could empty the ACK'ed buffer here. | 
|  | * If that happens we must clear the polling flag, otherwise | 
|  | * qdio_stop_polling() could set the buffer to NOT_INIT after | 
|  | * it was set to EMPTY which would kill us. | 
|  | */ | 
|  | spin_lock_irqsave(&q->u.in.lock, flags); | 
|  | if (q->u.in.polling) | 
|  | if (buf_in_between(q->last_move_ftc, bufnr, count)) | 
|  | q->u.in.polling = 0; | 
|  |  | 
|  | count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); | 
|  | spin_unlock_irqrestore(&q->u.in.lock, flags); | 
|  |  | 
|  | used = atomic_add_return(count, &q->nr_buf_used) - count; | 
|  | BUG_ON(used + count > QDIO_MAX_BUFFERS_PER_Q); | 
|  |  | 
|  | /* no need to signal as long as the adapter had free buffers */ | 
|  | if (used) | 
|  | return; | 
|  |  | 
|  | if (need_siga_in(q)) { | 
|  | rc = qdio_siga_input(q); | 
|  | if (rc) | 
|  | q->qdio_error = rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * handle_outbound - process filled outbound buffers | 
|  | * @q: queue containing the buffers | 
|  | * @callflags: flags | 
|  | * @bufnr: first buffer to process | 
|  | * @count: how many buffers are filled | 
|  | */ | 
|  | static void handle_outbound(struct qdio_q *q, unsigned int callflags, | 
|  | int bufnr, int count) | 
|  | { | 
|  | unsigned char state; | 
|  | int used; | 
|  |  | 
|  | qdio_perf_stat_inc(&perf_stats.outbound_handler); | 
|  |  | 
|  | count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); | 
|  | used = atomic_add_return(count, &q->nr_buf_used); | 
|  | BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q); | 
|  |  | 
|  | if (callflags & QDIO_FLAG_PCI_OUT) | 
|  | q->u.out.pci_out_enabled = 1; | 
|  | else | 
|  | q->u.out.pci_out_enabled = 0; | 
|  |  | 
|  | if (queue_type(q) == QDIO_IQDIO_QFMT) { | 
|  | if (multicast_outbound(q)) | 
|  | qdio_kick_outbound_q(q); | 
|  | else | 
|  | if ((q->irq_ptr->ssqd_desc.mmwc > 1) && | 
|  | (count > 1) && | 
|  | (count <= q->irq_ptr->ssqd_desc.mmwc)) { | 
|  | /* exploit enhanced SIGA */ | 
|  | q->u.out.use_enh_siga = 1; | 
|  | qdio_kick_outbound_q(q); | 
|  | } else { | 
|  | /* | 
|  | * One siga-w per buffer required for unicast | 
|  | * HiperSockets. | 
|  | */ | 
|  | q->u.out.use_enh_siga = 0; | 
|  | while (count--) | 
|  | qdio_kick_outbound_q(q); | 
|  | } | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (need_siga_sync(q)) { | 
|  | qdio_siga_sync_q(q); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* try to fast requeue buffers */ | 
|  | get_buf_state(q, prev_buf(bufnr), &state); | 
|  | if (state != SLSB_CU_OUTPUT_PRIMED) | 
|  | qdio_kick_outbound_q(q); | 
|  | else { | 
|  | QDIO_DBF_TEXT5(0, trace, "fast-req"); | 
|  | qdio_perf_stat_inc(&perf_stats.fast_requeue); | 
|  | } | 
|  | out: | 
|  | /* Fixme: could wait forever if called from process context */ | 
|  | tasklet_schedule(&q->tasklet); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * do_QDIO - process input or output buffers | 
|  | * @cdev: associated ccw_device for the qdio subchannel | 
|  | * @callflags: input or output and special flags from the program | 
|  | * @q_nr: queue number | 
|  | * @bufnr: buffer number | 
|  | * @count: how many buffers to process | 
|  | */ | 
|  | int do_QDIO(struct ccw_device *cdev, unsigned int callflags, | 
|  | int q_nr, int bufnr, int count) | 
|  | { | 
|  | struct qdio_irq *irq_ptr; | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | char dbf_text[20]; | 
|  |  | 
|  | sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) || | 
|  | (count > QDIO_MAX_BUFFERS_PER_Q) || | 
|  | (q_nr > QDIO_MAX_QUEUES_PER_IRQ)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!count) | 
|  | return 0; | 
|  |  | 
|  | irq_ptr = cdev->private->qdio_data; | 
|  | if (!irq_ptr) | 
|  | return -ENODEV; | 
|  |  | 
|  | #ifdef CONFIG_QDIO_DEBUG | 
|  | if (callflags & QDIO_FLAG_SYNC_INPUT) | 
|  | QDIO_DBF_HEX3(0, trace, &irq_ptr->input_qs[q_nr], | 
|  | sizeof(void *)); | 
|  | else | 
|  | QDIO_DBF_HEX3(0, trace, &irq_ptr->output_qs[q_nr], | 
|  | sizeof(void *)); | 
|  |  | 
|  | sprintf(dbf_text, "flag%04x", callflags); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  | sprintf(dbf_text, "qi%02xct%02x", bufnr, count); | 
|  | QDIO_DBF_TEXT3(0, trace, dbf_text); | 
|  | #endif /* CONFIG_QDIO_DEBUG */ | 
|  |  | 
|  | if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (callflags & QDIO_FLAG_SYNC_INPUT) | 
|  | handle_inbound(irq_ptr->input_qs[q_nr], | 
|  | callflags, bufnr, count); | 
|  | else if (callflags & QDIO_FLAG_SYNC_OUTPUT) | 
|  | handle_outbound(irq_ptr->output_qs[q_nr], | 
|  | callflags, bufnr, count); | 
|  | else { | 
|  | QDIO_DBF_TEXT3(1, trace, "doQD:inv"); | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(do_QDIO); | 
|  |  | 
|  | static int __init init_QDIO(void) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = qdio_setup_init(); | 
|  | if (rc) | 
|  | return rc; | 
|  | rc = tiqdio_allocate_memory(); | 
|  | if (rc) | 
|  | goto out_cache; | 
|  | rc = qdio_debug_init(); | 
|  | if (rc) | 
|  | goto out_ti; | 
|  | rc = qdio_setup_perf_stats(); | 
|  | if (rc) | 
|  | goto out_debug; | 
|  | rc = tiqdio_register_thinints(); | 
|  | if (rc) | 
|  | goto out_perf; | 
|  | return 0; | 
|  |  | 
|  | out_perf: | 
|  | qdio_remove_perf_stats(); | 
|  | out_debug: | 
|  | qdio_debug_exit(); | 
|  | out_ti: | 
|  | tiqdio_free_memory(); | 
|  | out_cache: | 
|  | qdio_setup_exit(); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void __exit exit_QDIO(void) | 
|  | { | 
|  | tiqdio_unregister_thinints(); | 
|  | tiqdio_free_memory(); | 
|  | qdio_remove_perf_stats(); | 
|  | qdio_debug_exit(); | 
|  | qdio_setup_exit(); | 
|  | } | 
|  |  | 
|  | module_init(init_QDIO); | 
|  | module_exit(exit_QDIO); |