Merge tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO changes from Linus Walleij:
- New driver for AMD-8111 southbridge GPIOs
- New driver for Wolfson Micro Arizona devices
- Propagate device tree parse errors
- Probe deferral finalizations - all expected calls to GPIO will now
hopefully request deferral where apropriate
- Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP
and PCA953X drivers.
Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c
* tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available
gpiolib: Defer failed gpio requests by default
MAINTAINERS: add entry OMAP GPIO driver
gpio/pca953x: increase variables size to support 24 bit of data
GPIO: PCA953X: Increase size of invert variable to support 24 bit
gpio/omap: move bank->dbck initialization to omap_gpio_mod_init()
gpio/mxc: use the edge_sel feature if available
gpio: propagate of_parse_phandle_with_args errors
gpio: samsung: add flags specifier to device-tree binding
gpiolib: Add support for Wolfson Microelectronics Arizona class devices
gpio: gpio-lpc32xx: Add gpio_to_irq mapping
gpio: pcf857x: share 8/16 bit access functions
gpio: LPC32xx: Driver cleanup
MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry
gpiolib: wm8994: Convert to devm_kzalloc()
gpiolib: wm8994: Use irq_domain mappings for gpios
gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips
gpio/tca6424: merge I2C transactions, remove cast
gpio/of: fix a typo of comment message
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 04691d3..4db460b 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -37,7 +37,8 @@
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
- IMX31_GPIO, /* runs on all other i.mx */
+ IMX31_GPIO, /* runs on i.mx31 */
+ IMX35_GPIO, /* runs on all other i.mx */
};
/* device type dependent stuff */
@@ -49,6 +50,7 @@
unsigned icr2_reg;
unsigned imr_reg;
unsigned isr_reg;
+ int edge_sel_reg;
unsigned low_level;
unsigned high_level;
unsigned rise_edge;
@@ -73,6 +75,7 @@
.icr2_reg = 0x2c,
.imr_reg = 0x30,
.isr_reg = 0x34,
+ .edge_sel_reg = -EINVAL,
.low_level = 0x03,
.high_level = 0x02,
.rise_edge = 0x00,
@@ -87,6 +90,22 @@
.icr2_reg = 0x10,
.imr_reg = 0x14,
.isr_reg = 0x18,
+ .edge_sel_reg = -EINVAL,
+ .low_level = 0x00,
+ .high_level = 0x01,
+ .rise_edge = 0x02,
+ .fall_edge = 0x03,
+};
+
+static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
+ .dr_reg = 0x00,
+ .gdir_reg = 0x04,
+ .psr_reg = 0x08,
+ .icr1_reg = 0x0c,
+ .icr2_reg = 0x10,
+ .imr_reg = 0x14,
+ .isr_reg = 0x18,
+ .edge_sel_reg = 0x1c,
.low_level = 0x00,
.high_level = 0x01,
.rise_edge = 0x02,
@@ -103,12 +122,13 @@
#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
#define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
#define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
+#define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg)
#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
-#define GPIO_INT_NONE 0x4
+#define GPIO_INT_BOTH_EDGES 0x4
static struct platform_device_id mxc_gpio_devtype[] = {
{
@@ -121,6 +141,9 @@
.name = "imx31-gpio",
.driver_data = IMX31_GPIO,
}, {
+ .name = "imx35-gpio",
+ .driver_data = IMX35_GPIO,
+ }, {
/* sentinel */
}
};
@@ -129,6 +152,7 @@
{ .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
{ .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
{ .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
+ { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
{ /* sentinel */ }
};
@@ -160,15 +184,19 @@
edge = GPIO_INT_FALL_EDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
- val = gpio_get_value(gpio);
- if (val) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ if (GPIO_EDGE_SEL >= 0) {
+ edge = GPIO_INT_BOTH_EDGES;
} else {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ val = gpio_get_value(gpio);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << gpio_idx;
}
- port->both_edges |= 1 << gpio_idx;
break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
@@ -180,10 +208,23 @@
return -EINVAL;
}
- reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */
- bit = gpio_idx & 0xf;
- val = readl(reg) & ~(0x3 << (bit << 1));
- writel(val | (edge << (bit << 1)), reg);
+ if (GPIO_EDGE_SEL >= 0) {
+ val = readl(port->base + GPIO_EDGE_SEL);
+ if (edge == GPIO_INT_BOTH_EDGES)
+ writel(val | (1 << gpio_idx),
+ port->base + GPIO_EDGE_SEL);
+ else
+ writel(val & ~(1 << gpio_idx),
+ port->base + GPIO_EDGE_SEL);
+ }
+
+ if (edge != GPIO_INT_BOTH_EDGES) {
+ reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
+ bit = gpio_idx & 0xf;
+ val = readl(reg) & ~(0x3 << (bit << 1));
+ writel(val | (edge << (bit << 1)), reg);
+ }
+
writel(1 << gpio_idx, port->base + GPIO_ISR);
return 0;
@@ -335,7 +376,9 @@
return;
}
- if (hwtype == IMX31_GPIO)
+ if (hwtype == IMX35_GPIO)
+ mxc_gpio_hwdata = &imx35_gpio_hwdata;
+ else if (hwtype == IMX31_GPIO)
mxc_gpio_hwdata = &imx31_gpio_hwdata;
else
mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;