powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset. i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now. This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a3451d5..9f279e0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -275,11 +275,13 @@
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool " IBM pSeries & new (POWER5-based) iSeries"
+ select PPC_I8259
default y
config PPC_CHRP
bool " Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_I8259
select PPC_INDIRECT_PCI
default y
@@ -298,6 +300,7 @@
config PPC_PREP
bool " PowerPC Reference Platform (PReP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_I8259
select PPC_INDIRECT_PCI
default y
@@ -628,6 +631,7 @@
config ISA
bool "Support for ISA-bus hardware"
depends on PPC_PREP || PPC_CHRP
+ select PPC_I8259
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -640,6 +644,11 @@
depends on PPC64 || POWER4 || 6xx && !CPM2
default y
+config PPC_I8259
+ bool
+ default y if 85xx
+ default n
+
config PPC_INDIRECT_PCI
bool
depends on PCI
@@ -679,6 +688,7 @@
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
+ select PPC_I8259
help
Say Y here if you have a system based on a Motorola 8xx-series
embedded processor with a QSPAN PCI interface, otherwise say N.
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 784b41e..81250090 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -48,6 +48,7 @@
config LOPEC
bool "Motorola-LoPEC"
+ select PPC_I8259
config MVME5100
bool "Motorola-MVME5100"
@@ -55,6 +56,7 @@
config PPLUS
bool "Motorola-PowerPlus"
+ select PPC_I8259
select PPC_INDIRECT_PCI
config PRPMC750
@@ -67,12 +69,14 @@
config SANDPOINT
bool "Motorola-Sandpoint"
+ select PPC_I8259
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
+ select PPC_I8259
config PAL4
bool "SBS-Palomar4"
@@ -307,6 +311,7 @@
config MVME5100_IPMC761_PRESENT
bool "MVME5100 configured with an IPMC761"
depends on MVME5100
+ select PPC_I8259
config SPRUCE_BAUD_33M
bool "Spruce baud clock support"
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 92d1800..0fa5bea 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -87,7 +87,6 @@
static void pseries_shared_idle(void);
static void pseries_dedicated_idle(void);
-static volatile void __iomem * chrp_int_ack_special;
struct mpic *pSeries_mpic;
void pSeries_show_cpuinfo(struct seq_file *m)
@@ -119,19 +118,11 @@
fwnmi_active = 1;
}
-static int pSeries_irq_cascade(struct pt_regs *regs, void *data)
-{
- if (chrp_int_ack_special)
- return readb(chrp_int_ack_special);
- else
- return i8259_irq(regs);
-}
-
static void __init pSeries_init_mpic(void)
{
unsigned int *addrp;
struct device_node *np;
- int i;
+ unsigned long intack = 0;
/* All ISUs are setup, complete initialization */
mpic_init(pSeries_mpic);
@@ -142,16 +133,14 @@
get_property(np, "8259-interrupt-acknowledge", NULL)))
printk(KERN_ERR "Cannot find pci to get ack address\n");
else
- chrp_int_ack_special = ioremap(addrp[prom_n_addr_cells(np)-1], 1);
+ intack = addrp[prom_n_addr_cells(np)-1];
of_node_put(np);
/* Setup the legacy interrupts & controller */
- for (i = 0; i < NUM_ISA_INTERRUPTS; i++)
- irq_desc[i].handler = &i8259_pic;
- i8259_init(0);
+ i8259_init(intack, 0);
/* Hook cascade to mpic */
- mpic_setup_cascade(NUM_ISA_INTERRUPTS, pSeries_irq_cascade, NULL);
+ mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
}
static void __init pSeries_setup_mpic(void)
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index e66fef6..f3c9e61 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
+obj-$(CONFIG_PPC_I8259) += i8259.o
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
new file mode 100644
index 0000000..90bce6e
--- /dev/null
+++ b/arch/powerpc/sysdev/i8259.c
@@ -0,0 +1,221 @@
+/*
+ * i8259 interrupt controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+
+static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
+
+static unsigned char cached_8259[2] = { 0xff, 0xff };
+#define cached_A1 (cached_8259[0])
+#define cached_21 (cached_8259[1])
+
+static DEFINE_SPINLOCK(i8259_lock);
+
+static int i8259_pic_irq_offset;
+
+/*
+ * Acknowledge the IRQ using either the PCI host bridge's interrupt
+ * acknowledge feature or poll. How i8259_init() is called determines
+ * which is called. It should be noted that polling is broken on some
+ * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
+ */
+int i8259_irq(struct pt_regs *regs)
+{
+ int irq;
+
+ spin_lock(&i8259_lock);
+
+ /* Either int-ack or poll for the IRQ */
+ if (pci_intack)
+ irq = readb(pci_intack);
+ else {
+ /* Perform an interrupt acknowledge cycle on controller 1. */
+ outb(0x0C, 0x20); /* prepare for poll */
+ irq = inb(0x20) & 7;
+ if (irq == 2 ) {
+ /*
+ * Interrupt is cascaded so perform interrupt
+ * acknowledge on controller 2.
+ */
+ outb(0x0C, 0xA0); /* prepare for poll */
+ irq = (inb(0xA0) & 7) + 8;
+ }
+ }
+
+ if (irq == 7) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ if (!pci_intack)
+ outb(0x0B, 0x20); /* ISR register */
+ if(~inb(0x20) & 0x80)
+ irq = -1;
+ }
+
+ spin_unlock(&i8259_lock);
+ return irq + i8259_pic_irq_offset;
+}
+
+int i8259_irq_cascade(struct pt_regs *regs, void *unused)
+{
+ return i8259_irq(regs);
+}
+
+static void i8259_mask_and_ack_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr > 7) {
+ cached_A1 |= 1 << (irq_nr-8);
+ inb(0xA1); /* DUMMY */
+ outb(cached_A1, 0xA1);
+ outb(0x20, 0xA0); /* Non-specific EOI */
+ outb(0x20, 0x20); /* Non-specific EOI to cascade */
+ } else {
+ cached_21 |= 1 << irq_nr;
+ inb(0x21); /* DUMMY */
+ outb(cached_21, 0x21);
+ outb(0x20, 0x20); /* Non-specific EOI */
+ }
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_set_irq_mask(int irq_nr)
+{
+ outb(cached_A1,0xA1);
+ outb(cached_21,0x21);
+}
+
+static void i8259_mask_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr < 8)
+ cached_21 |= 1 << irq_nr;
+ else
+ cached_A1 |= 1 << (irq_nr-8);
+ i8259_set_irq_mask(irq_nr);
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_unmask_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ irq_nr -= i8259_pic_irq_offset;
+ if (irq_nr < 8)
+ cached_21 &= ~(1 << irq_nr);
+ else
+ cached_A1 &= ~(1 << (irq_nr-8));
+ i8259_set_irq_mask(irq_nr);
+ spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && irq_desc[irq].action)
+ i8259_unmask_irq(irq);
+}
+
+struct hw_interrupt_type i8259_pic = {
+ .typename = " i8259 ",
+ .enable = i8259_unmask_irq,
+ .disable = i8259_mask_irq,
+ .ack = i8259_mask_and_ack_irq,
+ .end = i8259_end_irq,
+};
+
+static struct resource pic1_iores = {
+ .name = "8259 (master)",
+ .start = 0x20,
+ .end = 0x21,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic2_iores = {
+ .name = "8259 (slave)",
+ .start = 0xa0,
+ .end = 0xa1,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic_edgectrl_iores = {
+ .name = "8259 edge control",
+ .start = 0x4d0,
+ .end = 0x4d1,
+ .flags = IORESOURCE_BUSY,
+};
+
+static struct irqaction i8259_irqaction = {
+ .handler = no_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "82c59 secondary cascade",
+};
+
+/*
+ * i8259_init()
+ * intack_addr - PCI interrupt acknowledge (real) address which will return
+ * the active irq from the 8259
+ */
+void __init i8259_init(unsigned long intack_addr, int offset)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&i8259_lock, flags);
+ i8259_pic_irq_offset = offset;
+
+ /* init master interrupt controller */
+ outb(0x11, 0x20); /* Start init sequence */
+ outb(0x00, 0x21); /* Vector base */
+ outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+ outb(0x01, 0x21); /* Select 8086 mode */
+
+ /* init slave interrupt controller */
+ outb(0x11, 0xA0); /* Start init sequence */
+ outb(0x08, 0xA1); /* Vector base */
+ outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
+ outb(0x01, 0xA1); /* Select 8086 mode */
+
+ /* always read ISR */
+ outb(0x0B, 0x20);
+ outb(0x0B, 0xA0);
+
+ /* Mask all interrupts */
+ outb(cached_A1, 0xA1);
+ outb(cached_21, 0x21);
+
+ spin_unlock_irqrestore(&i8259_lock, flags);
+
+ /* reserve our resources */
+ setup_irq(offset + 2, &i8259_irqaction);
+ request_resource(&ioport_resource, &pic1_iores);
+ request_resource(&ioport_resource, &pic2_iores);
+ request_resource(&ioport_resource, &pic_edgectrl_iores);
+
+ if (intack_addr != 0)
+ pci_intack = ioremap(intack_addr, 1);
+
+ for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
+ irq_desc[offset + i].handler = &i8259_pic;
+}