| #ifndef __LINUX_PARPORT_PC_H | 
 | #define __LINUX_PARPORT_PC_H | 
 |  | 
 | #include <asm/io.h> | 
 |  | 
 | /* --- register definitions ------------------------------- */ | 
 |  | 
 | #define ECONTROL(p) ((p)->base_hi + 0x2) | 
 | #define CONFIGB(p)  ((p)->base_hi + 0x1) | 
 | #define CONFIGA(p)  ((p)->base_hi + 0x0) | 
 | #define FIFO(p)     ((p)->base_hi + 0x0) | 
 | #define EPPDATA(p)  ((p)->base    + 0x4) | 
 | #define EPPADDR(p)  ((p)->base    + 0x3) | 
 | #define CONTROL(p)  ((p)->base    + 0x2) | 
 | #define STATUS(p)   ((p)->base    + 0x1) | 
 | #define DATA(p)     ((p)->base    + 0x0) | 
 |  | 
 | struct parport_pc_private { | 
 | 	/* Contents of CTR. */ | 
 | 	unsigned char ctr; | 
 |  | 
 | 	/* Bitmask of writable CTR bits. */ | 
 | 	unsigned char ctr_writable; | 
 |  | 
 | 	/* Whether or not there's an ECR. */ | 
 | 	int ecr; | 
 |  | 
 | 	/* Number of PWords that FIFO will hold. */ | 
 | 	int fifo_depth; | 
 |  | 
 | 	/* Number of bytes per portword. */ | 
 | 	int pword; | 
 |  | 
 | 	/* Not used yet. */ | 
 | 	int readIntrThreshold; | 
 | 	int writeIntrThreshold; | 
 |  | 
 | 	/* buffer suitable for DMA, if DMA enabled */ | 
 | 	char *dma_buf; | 
 | 	dma_addr_t dma_handle; | 
 | 	struct list_head list; | 
 | 	struct parport *port; | 
 | }; | 
 |  | 
 | struct parport_pc_via_data | 
 | { | 
 | 	/* ISA PnP IRQ routing register 1 */ | 
 | 	u8 via_pci_parport_irq_reg; | 
 | 	/* ISA PnP DMA request routing register */ | 
 | 	u8 via_pci_parport_dma_reg; | 
 | 	/* Register and value to enable SuperIO configuration access */ | 
 | 	u8 via_pci_superio_config_reg; | 
 | 	u8 via_pci_superio_config_data; | 
 | 	/* SuperIO function register number */ | 
 | 	u8 viacfg_function; | 
 | 	/* parallel port control register number */ | 
 | 	u8 viacfg_parport_control; | 
 | 	/* Parallel port base address register */ | 
 | 	u8 viacfg_parport_base; | 
 | }; | 
 |  | 
 | static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d) | 
 | { | 
 | #ifdef DEBUG_PARPORT | 
 | 	printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d); | 
 | #endif | 
 | 	outb(d, DATA(p)); | 
 | } | 
 |  | 
 | static __inline__ unsigned char parport_pc_read_data(struct parport *p) | 
 | { | 
 | 	unsigned char val = inb (DATA (p)); | 
 | #ifdef DEBUG_PARPORT | 
 | 	printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n", | 
 | 		p, val); | 
 | #endif | 
 | 	return val; | 
 | } | 
 |  | 
 | #ifdef DEBUG_PARPORT | 
 | static inline void dump_parport_state (char *str, struct parport *p) | 
 | { | 
 | 	/* here's hoping that reading these ports won't side-effect anything underneath */ | 
 | 	unsigned char ecr = inb (ECONTROL (p)); | 
 | 	unsigned char dcr = inb (CONTROL (p)); | 
 | 	unsigned char dsr = inb (STATUS (p)); | 
 | 	static const char *const ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"}; | 
 | 	const struct parport_pc_private *priv = p->physport->private_data; | 
 | 	int i; | 
 |  | 
 | 	printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]); | 
 | 	if (ecr & 0x10) printk (",nErrIntrEn"); | 
 | 	if (ecr & 0x08) printk (",dmaEn"); | 
 | 	if (ecr & 0x04) printk (",serviceIntr"); | 
 | 	if (ecr & 0x02) printk (",f_full"); | 
 | 	if (ecr & 0x01) printk (",f_empty"); | 
 | 	for (i=0; i<2; i++) { | 
 | 		printk ("]  dcr(%s)=[", i ? "soft" : "hard"); | 
 | 		dcr = i ? priv->ctr : inb (CONTROL (p)); | 
 | 	 | 
 | 		if (dcr & 0x20) { | 
 | 			printk ("rev"); | 
 | 		} else { | 
 | 			printk ("fwd"); | 
 | 		} | 
 | 		if (dcr & 0x10) printk (",ackIntEn"); | 
 | 		if (!(dcr & 0x08)) printk (",N-SELECT-IN"); | 
 | 		if (dcr & 0x04) printk (",N-INIT"); | 
 | 		if (!(dcr & 0x02)) printk (",N-AUTOFD"); | 
 | 		if (!(dcr & 0x01)) printk (",N-STROBE"); | 
 | 	} | 
 | 	printk ("]  dsr=["); | 
 | 	if (!(dsr & 0x80)) printk ("BUSY"); | 
 | 	if (dsr & 0x40) printk (",N-ACK"); | 
 | 	if (dsr & 0x20) printk (",PERROR"); | 
 | 	if (dsr & 0x10) printk (",SELECT"); | 
 | 	if (dsr & 0x08) printk (",N-FAULT"); | 
 | 	printk ("]\n"); | 
 | 	return; | 
 | } | 
 | #else	/* !DEBUG_PARPORT */ | 
 | #define dump_parport_state(args...) | 
 | #endif	/* !DEBUG_PARPORT */ | 
 |  | 
 | /* __parport_pc_frob_control differs from parport_pc_frob_control in that | 
 |  * it doesn't do any extra masking. */ | 
 | static __inline__ unsigned char __parport_pc_frob_control (struct parport *p, | 
 | 							   unsigned char mask, | 
 | 							   unsigned char val) | 
 | { | 
 | 	struct parport_pc_private *priv = p->physport->private_data; | 
 | 	unsigned char ctr = priv->ctr; | 
 | #ifdef DEBUG_PARPORT | 
 | 	printk (KERN_DEBUG | 
 | 		"__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n", | 
 | 		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable); | 
 | #endif | 
 | 	ctr = (ctr & ~mask) ^ val; | 
 | 	ctr &= priv->ctr_writable; /* only write writable bits. */ | 
 | 	outb (ctr, CONTROL (p)); | 
 | 	priv->ctr = ctr;	/* Update soft copy */ | 
 | 	return ctr; | 
 | } | 
 |  | 
 | static __inline__ void parport_pc_data_reverse (struct parport *p) | 
 | { | 
 | 	__parport_pc_frob_control (p, 0x20, 0x20); | 
 | } | 
 |  | 
 | static __inline__ void parport_pc_data_forward (struct parport *p) | 
 | { | 
 | 	__parport_pc_frob_control (p, 0x20, 0x00); | 
 | } | 
 |  | 
 | static __inline__ void parport_pc_write_control (struct parport *p, | 
 | 						 unsigned char d) | 
 | { | 
 | 	const unsigned char wm = (PARPORT_CONTROL_STROBE | | 
 | 				  PARPORT_CONTROL_AUTOFD | | 
 | 				  PARPORT_CONTROL_INIT | | 
 | 				  PARPORT_CONTROL_SELECT); | 
 |  | 
 | 	/* Take this out when drivers have adapted to newer interface. */ | 
 | 	if (d & 0x20) { | 
 | 		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n", | 
 | 			p->name, p->cad->name); | 
 | 		parport_pc_data_reverse (p); | 
 | 	} | 
 |  | 
 | 	__parport_pc_frob_control (p, wm, d & wm); | 
 | } | 
 |  | 
 | static __inline__ unsigned char parport_pc_read_control(struct parport *p) | 
 | { | 
 | 	const unsigned char rm = (PARPORT_CONTROL_STROBE | | 
 | 				  PARPORT_CONTROL_AUTOFD | | 
 | 				  PARPORT_CONTROL_INIT | | 
 | 				  PARPORT_CONTROL_SELECT); | 
 | 	const struct parport_pc_private *priv = p->physport->private_data; | 
 | 	return priv->ctr & rm; /* Use soft copy */ | 
 | } | 
 |  | 
 | static __inline__ unsigned char parport_pc_frob_control (struct parport *p, | 
 | 							 unsigned char mask, | 
 | 							 unsigned char val) | 
 | { | 
 | 	const unsigned char wm = (PARPORT_CONTROL_STROBE | | 
 | 				  PARPORT_CONTROL_AUTOFD | | 
 | 				  PARPORT_CONTROL_INIT | | 
 | 				  PARPORT_CONTROL_SELECT); | 
 |  | 
 | 	/* Take this out when drivers have adapted to newer interface. */ | 
 | 	if (mask & 0x20) { | 
 | 		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n", | 
 | 			p->name, p->cad->name, | 
 | 			(val & 0x20) ? "reverse" : "forward"); | 
 | 		if (val & 0x20) | 
 | 			parport_pc_data_reverse (p); | 
 | 		else | 
 | 			parport_pc_data_forward (p); | 
 | 	} | 
 |  | 
 | 	/* Restrict mask and val to control lines. */ | 
 | 	mask &= wm; | 
 | 	val &= wm; | 
 |  | 
 | 	return __parport_pc_frob_control (p, mask, val); | 
 | } | 
 |  | 
 | static __inline__ unsigned char parport_pc_read_status(struct parport *p) | 
 | { | 
 | 	return inb(STATUS(p)); | 
 | } | 
 |  | 
 |  | 
 | static __inline__ void parport_pc_disable_irq(struct parport *p) | 
 | { | 
 | 	__parport_pc_frob_control (p, 0x10, 0x00); | 
 | } | 
 |  | 
 | static __inline__ void parport_pc_enable_irq(struct parport *p) | 
 | { | 
 | 	__parport_pc_frob_control (p, 0x10, 0x10); | 
 | } | 
 |  | 
 | extern void parport_pc_release_resources(struct parport *p); | 
 |  | 
 | extern int parport_pc_claim_resources(struct parport *p); | 
 |  | 
 | /* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */ | 
 | extern struct parport *parport_pc_probe_port (unsigned long base, | 
 | 					      unsigned long base_hi, | 
 | 					      int irq, int dma, | 
 | 					      struct device *dev); | 
 | extern void parport_pc_unregister_port (struct parport *p); | 
 |  | 
 | #endif |