| #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/ctype.h> | 
 | #include <linux/fd.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/root_dev.h> | 
 | #include <linux/security.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/genhd.h> | 
 | #include <linux/mount.h> | 
 | #include <linux/device.h> | 
 | #include <linux/init.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/initrd.h> | 
 | #include <linux/async.h> | 
 | #include <linux/fs_struct.h> | 
 |  | 
 | #include <linux/nfs_fs.h> | 
 | #include <linux/nfs_fs_sb.h> | 
 | #include <linux/nfs_mount.h> | 
 |  | 
 | #include "do_mounts.h" | 
 |  | 
 | int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */ | 
 |  | 
 | int root_mountflags = MS_RDONLY | MS_SILENT; | 
 | static char * __initdata root_device_name; | 
 | static char __initdata saved_root_name[64]; | 
 | static int __initdata root_wait; | 
 |  | 
 | dev_t ROOT_DEV; | 
 |  | 
 | static int __init load_ramdisk(char *str) | 
 | { | 
 | 	rd_doload = simple_strtol(str,NULL,0) & 3; | 
 | 	return 1; | 
 | } | 
 | __setup("load_ramdisk=", load_ramdisk); | 
 |  | 
 | static int __init readonly(char *str) | 
 | { | 
 | 	if (*str) | 
 | 		return 0; | 
 | 	root_mountflags |= MS_RDONLY; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int __init readwrite(char *str) | 
 | { | 
 | 	if (*str) | 
 | 		return 0; | 
 | 	root_mountflags &= ~MS_RDONLY; | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("ro", readonly); | 
 | __setup("rw", readwrite); | 
 |  | 
 | /* | 
 |  *	Convert a name into device number.  We accept the following variants: | 
 |  * | 
 |  *	1) device number in hexadecimal	represents itself | 
 |  *	2) /dev/nfs represents Root_NFS (0xff) | 
 |  *	3) /dev/<disk_name> represents the device number of disk | 
 |  *	4) /dev/<disk_name><decimal> represents the device number | 
 |  *         of partition - device number of disk plus the partition number | 
 |  *	5) /dev/<disk_name>p<decimal> - same as the above, that form is | 
 |  *	   used when disk name of partitioned disk ends on a digit. | 
 |  * | 
 |  *	If name doesn't have fall into the categories above, we return (0,0). | 
 |  *	block_class is used to check if something is a disk name. If the disk | 
 |  *	name contains slashes, the device name has them replaced with | 
 |  *	bangs. | 
 |  */ | 
 |  | 
 | dev_t name_to_dev_t(char *name) | 
 | { | 
 | 	char s[32]; | 
 | 	char *p; | 
 | 	dev_t res = 0; | 
 | 	int part; | 
 |  | 
 | 	if (strncmp(name, "/dev/", 5) != 0) { | 
 | 		unsigned maj, min; | 
 |  | 
 | 		if (sscanf(name, "%u:%u", &maj, &min) == 2) { | 
 | 			res = MKDEV(maj, min); | 
 | 			if (maj != MAJOR(res) || min != MINOR(res)) | 
 | 				goto fail; | 
 | 		} else { | 
 | 			res = new_decode_dev(simple_strtoul(name, &p, 16)); | 
 | 			if (*p) | 
 | 				goto fail; | 
 | 		} | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	name += 5; | 
 | 	res = Root_NFS; | 
 | 	if (strcmp(name, "nfs") == 0) | 
 | 		goto done; | 
 | 	res = Root_RAM0; | 
 | 	if (strcmp(name, "ram") == 0) | 
 | 		goto done; | 
 |  | 
 | 	if (strlen(name) > 31) | 
 | 		goto fail; | 
 | 	strcpy(s, name); | 
 | 	for (p = s; *p; p++) | 
 | 		if (*p == '/') | 
 | 			*p = '!'; | 
 | 	res = blk_lookup_devt(s, 0); | 
 | 	if (res) | 
 | 		goto done; | 
 |  | 
 | 	/* | 
 | 	 * try non-existant, but valid partition, which may only exist | 
 | 	 * after revalidating the disk, like partitioned md devices | 
 | 	 */ | 
 | 	while (p > s && isdigit(p[-1])) | 
 | 		p--; | 
 | 	if (p == s || !*p || *p == '0') | 
 | 		goto fail; | 
 |  | 
 | 	/* try disk name without <part number> */ | 
 | 	part = simple_strtoul(p, NULL, 10); | 
 | 	*p = '\0'; | 
 | 	res = blk_lookup_devt(s, part); | 
 | 	if (res) | 
 | 		goto done; | 
 |  | 
 | 	/* try disk name without p<part number> */ | 
 | 	if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p') | 
 | 		goto fail; | 
 | 	p[-1] = '\0'; | 
 | 	res = blk_lookup_devt(s, part); | 
 | 	if (res) | 
 | 		goto done; | 
 |  | 
 | fail: | 
 | 	return 0; | 
 | done: | 
 | 	return res; | 
 | } | 
 |  | 
 | static int __init root_dev_setup(char *line) | 
 | { | 
 | 	strlcpy(saved_root_name, line, sizeof(saved_root_name)); | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("root=", root_dev_setup); | 
 |  | 
 | static int __init rootwait_setup(char *str) | 
 | { | 
 | 	if (*str) | 
 | 		return 0; | 
 | 	root_wait = 1; | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("rootwait", rootwait_setup); | 
 |  | 
 | static char * __initdata root_mount_data; | 
 | static int __init root_data_setup(char *str) | 
 | { | 
 | 	root_mount_data = str; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static char * __initdata root_fs_names; | 
 | static int __init fs_names_setup(char *str) | 
 | { | 
 | 	root_fs_names = str; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static unsigned int __initdata root_delay; | 
 | static int __init root_delay_setup(char *str) | 
 | { | 
 | 	root_delay = simple_strtoul(str, NULL, 0); | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("rootflags=", root_data_setup); | 
 | __setup("rootfstype=", fs_names_setup); | 
 | __setup("rootdelay=", root_delay_setup); | 
 |  | 
 | static void __init get_fs_names(char *page) | 
 | { | 
 | 	char *s = page; | 
 |  | 
 | 	if (root_fs_names) { | 
 | 		strcpy(page, root_fs_names); | 
 | 		while (*s++) { | 
 | 			if (s[-1] == ',') | 
 | 				s[-1] = '\0'; | 
 | 		} | 
 | 	} else { | 
 | 		int len = get_filesystem_list(page); | 
 | 		char *p, *next; | 
 |  | 
 | 		page[len] = '\0'; | 
 | 		for (p = page-1; p; p = next) { | 
 | 			next = strchr(++p, '\n'); | 
 | 			if (*p++ != '\t') | 
 | 				continue; | 
 | 			while ((*s++ = *p++) != '\n') | 
 | 				; | 
 | 			s[-1] = '\0'; | 
 | 		} | 
 | 	} | 
 | 	*s = '\0'; | 
 | } | 
 |  | 
 | static int __init do_mount_root(char *name, char *fs, int flags, void *data) | 
 | { | 
 | 	int err = sys_mount(name, "/root", fs, flags, data); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	sys_chdir("/root"); | 
 | 	ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev; | 
 | 	printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n", | 
 | 	       current->fs->pwd.mnt->mnt_sb->s_type->name, | 
 | 	       current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ? | 
 | 	       " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void __init mount_block_root(char *name, int flags) | 
 | { | 
 | 	char *fs_names = __getname_gfp(GFP_KERNEL | 
 | 		| __GFP_NOTRACK_FALSE_POSITIVE); | 
 | 	char *p; | 
 | #ifdef CONFIG_BLOCK | 
 | 	char b[BDEVNAME_SIZE]; | 
 | #else | 
 | 	const char *b = name; | 
 | #endif | 
 |  | 
 | 	get_fs_names(fs_names); | 
 | retry: | 
 | 	for (p = fs_names; *p; p += strlen(p)+1) { | 
 | 		int err = do_mount_root(name, p, flags, root_mount_data); | 
 | 		switch (err) { | 
 | 			case 0: | 
 | 				goto out; | 
 | 			case -EACCES: | 
 | 				flags |= MS_RDONLY; | 
 | 				goto retry; | 
 | 			case -EINVAL: | 
 | 				continue; | 
 | 		} | 
 | 	        /* | 
 | 		 * Allow the user to distinguish between failed sys_open | 
 | 		 * and bad superblock on root device. | 
 | 		 * and give them a list of the available devices | 
 | 		 */ | 
 | #ifdef CONFIG_BLOCK | 
 | 		__bdevname(ROOT_DEV, b); | 
 | #endif | 
 | 		printk("VFS: Cannot open root device \"%s\" or %s\n", | 
 | 				root_device_name, b); | 
 | 		printk("Please append a correct \"root=\" boot option; here are the available partitions:\n"); | 
 |  | 
 | 		printk_all_partitions(); | 
 | #ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT | 
 | 		printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify " | 
 | 		       "explicit textual name for \"root=\" boot option.\n"); | 
 | #endif | 
 | 		panic("VFS: Unable to mount root fs on %s", b); | 
 | 	} | 
 |  | 
 | 	printk("List of all partitions:\n"); | 
 | 	printk_all_partitions(); | 
 | 	printk("No filesystem could mount root, tried: "); | 
 | 	for (p = fs_names; *p; p += strlen(p)+1) | 
 | 		printk(" %s", p); | 
 | 	printk("\n"); | 
 | #ifdef CONFIG_BLOCK | 
 | 	__bdevname(ROOT_DEV, b); | 
 | #endif | 
 | 	panic("VFS: Unable to mount root fs on %s", b); | 
 | out: | 
 | 	putname(fs_names); | 
 | } | 
 |   | 
 | #ifdef CONFIG_ROOT_NFS | 
 | static int __init mount_nfs_root(void) | 
 | { | 
 | 	void *data = nfs_root_data(); | 
 |  | 
 | 	create_dev("/dev/root", ROOT_DEV); | 
 | 	if (data && | 
 | 	    do_mount_root("/dev/root", "nfs", root_mountflags, data) == 0) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | #if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD) | 
 | void __init change_floppy(char *fmt, ...) | 
 | { | 
 | 	struct termios termios; | 
 | 	char buf[80]; | 
 | 	char c; | 
 | 	int fd; | 
 | 	va_list args; | 
 | 	va_start(args, fmt); | 
 | 	vsprintf(buf, fmt, args); | 
 | 	va_end(args); | 
 | 	fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0); | 
 | 	if (fd >= 0) { | 
 | 		sys_ioctl(fd, FDEJECT, 0); | 
 | 		sys_close(fd); | 
 | 	} | 
 | 	printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf); | 
 | 	fd = sys_open("/dev/console", O_RDWR, 0); | 
 | 	if (fd >= 0) { | 
 | 		sys_ioctl(fd, TCGETS, (long)&termios); | 
 | 		termios.c_lflag &= ~ICANON; | 
 | 		sys_ioctl(fd, TCSETSF, (long)&termios); | 
 | 		sys_read(fd, &c, 1); | 
 | 		termios.c_lflag |= ICANON; | 
 | 		sys_ioctl(fd, TCSETSF, (long)&termios); | 
 | 		sys_close(fd); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | void __init mount_root(void) | 
 | { | 
 | #ifdef CONFIG_ROOT_NFS | 
 | 	if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) { | 
 | 		if (mount_nfs_root()) | 
 | 			return; | 
 |  | 
 | 		printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); | 
 | 		ROOT_DEV = Root_FD0; | 
 | 	} | 
 | #endif | 
 | #ifdef CONFIG_BLK_DEV_FD | 
 | 	if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) { | 
 | 		/* rd_doload is 2 for a dual initrd/ramload setup */ | 
 | 		if (rd_doload==2) { | 
 | 			if (rd_load_disk(1)) { | 
 | 				ROOT_DEV = Root_RAM1; | 
 | 				root_device_name = NULL; | 
 | 			} | 
 | 		} else | 
 | 			change_floppy("root floppy"); | 
 | 	} | 
 | #endif | 
 | #ifdef CONFIG_BLOCK | 
 | 	create_dev("/dev/root", ROOT_DEV); | 
 | 	mount_block_root("/dev/root", root_mountflags); | 
 | #endif | 
 | } | 
 |  | 
 | /* | 
 |  * Prepare the namespace - decide what/where to mount, load ramdisks, etc. | 
 |  */ | 
 | void __init prepare_namespace(void) | 
 | { | 
 | 	int is_floppy; | 
 |  | 
 | 	if (root_delay) { | 
 | 		printk(KERN_INFO "Waiting %dsec before mounting root device...\n", | 
 | 		       root_delay); | 
 | 		ssleep(root_delay); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * wait for the known devices to complete their probing | 
 | 	 * | 
 | 	 * Note: this is a potential source of long boot delays. | 
 | 	 * For example, it is not atypical to wait 5 seconds here | 
 | 	 * for the touchpad of a laptop to initialize. | 
 | 	 */ | 
 | 	wait_for_device_probe(); | 
 |  | 
 | 	md_run_setup(); | 
 |  | 
 | 	if (saved_root_name[0]) { | 
 | 		root_device_name = saved_root_name; | 
 | 		if (!strncmp(root_device_name, "mtd", 3) || | 
 | 		    !strncmp(root_device_name, "ubi", 3)) { | 
 | 			mount_block_root(root_device_name, root_mountflags); | 
 | 			goto out; | 
 | 		} | 
 | 		ROOT_DEV = name_to_dev_t(root_device_name); | 
 | 		if (strncmp(root_device_name, "/dev/", 5) == 0) | 
 | 			root_device_name += 5; | 
 | 	} | 
 |  | 
 | 	if (initrd_load()) | 
 | 		goto out; | 
 |  | 
 | 	/* wait for any asynchronous scanning to complete */ | 
 | 	if ((ROOT_DEV == 0) && root_wait) { | 
 | 		printk(KERN_INFO "Waiting for root device %s...\n", | 
 | 			saved_root_name); | 
 | 		while (driver_probe_done() != 0 || | 
 | 			(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) | 
 | 			msleep(100); | 
 | 		async_synchronize_full(); | 
 | 	} | 
 |  | 
 | 	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; | 
 |  | 
 | 	if (is_floppy && rd_doload && rd_load_disk(0)) | 
 | 		ROOT_DEV = Root_RAM0; | 
 |  | 
 | 	mount_root(); | 
 | out: | 
 | 	devtmpfs_mount("dev"); | 
 | 	sys_mount(".", "/", NULL, MS_MOVE, NULL); | 
 | 	sys_chroot("."); | 
 | } |