mach-ux500: move MOP500 pins to separate file
Split off pin definitions for the MOP500 board family to its
own file.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
new file mode 100644
index 0000000..edd3a6b
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <plat/pincfg.h>
+
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+ /* SSP0 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD,
+ GPIO146_SSP0_TXD,
+
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+
+ /* SKE keypad */
+ GPIO153_KP_I7,
+ GPIO154_KP_I6,
+ GPIO155_KP_I5,
+ GPIO156_KP_I4,
+ GPIO157_KP_O7,
+ GPIO158_KP_O6,
+ GPIO159_KP_O5,
+ GPIO160_KP_O4,
+ GPIO161_KP_I3,
+ GPIO162_KP_I2,
+ GPIO163_KP_I1,
+ GPIO164_KP_I0,
+ GPIO165_KP_O3,
+ GPIO166_KP_O2,
+ GPIO167_KP_O1,
+ GPIO168_KP_O0,
+
+ /* GPIO_EXP_INT */
+ GPIO217_GPIO,
+
+ /* STMPE1601 IRQ */
+ GPIO218_GPIO | PIN_INPUT_PULLUP,
+
+ /* touch screen */
+ GPIO84_GPIO | PIN_INPUT_PULLUP,
+
+ /* USB OTG */
+ GPIO256_USB_NXT | PIN_PULL_DOWN,
+ GPIO257_USB_STP | PIN_PULL_UP,
+ GPIO258_USB_XCLK | PIN_PULL_DOWN,
+ GPIO259_USB_DIR | PIN_PULL_DOWN,
+ GPIO260_USB_DAT7 | PIN_PULL_DOWN,
+ GPIO261_USB_DAT6 | PIN_PULL_DOWN,
+ GPIO262_USB_DAT5 | PIN_PULL_DOWN,
+ GPIO263_USB_DAT4 | PIN_PULL_DOWN,
+ GPIO264_USB_DAT3 | PIN_PULL_DOWN,
+ GPIO265_USB_DAT2 | PIN_PULL_DOWN,
+ GPIO266_USB_DAT1 | PIN_PULL_DOWN,
+ GPIO267_USB_DAT0 | PIN_PULL_DOWN,
+};
+
+void __init mop500_pins_init(void)
+{
+ nmk_config_pins(mop500_pins,
+ ARRAY_SIZE(mop500_pins));
+}