pcmcia: IOCARD is also required for using IRQs
Dave Hinds pointed out to me that 37979e1546a7 will break b43 and
ray_cs, as IOCARD is not -- as the name would suggest -- only needed
for cards using IO ports. Instead, as it re-deines several pins, it
is also required for using interrupts.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index a9af0d7..0bdda5b 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -514,7 +514,9 @@
}
/* Pick memory or I/O card, DMA mode, interrupt */
- if (p_dev->_io)
+ if (p_dev->_io || flags & CONF_ENABLE_IRQ)
+ flags |= CONF_ENABLE_IOCARD;
+ if (flags & CONF_ENABLE_IOCARD)
s->socket.flags |= SS_IOCARD;
if (flags & CONF_ENABLE_SPKR) {
s->socket.flags |= SS_SPKR_ENA;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index d830c87..8479b66 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -259,6 +259,8 @@
#define CONF_ENABLE_SPKR 0x0002
#define CONF_ENABLE_PULSE_IRQ 0x0004
#define CONF_ENABLE_ESR 0x0008
+#define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ
+ * (CONF_ENABLE_IRQ) in use */
/* flags used by pcmcia_loop_config() autoconfiguration */
#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */