| #ifndef _IDE_H | 
 | #define _IDE_H | 
 | /* | 
 |  *  linux/include/linux/ide.h | 
 |  * | 
 |  *  Copyright (C) 1994-2002  Linus Torvalds & authors | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/ata.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/bio.h> | 
 | #include <linux/device.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/pm.h> | 
 | #ifdef CONFIG_BLK_DEV_IDEACPI | 
 | #include <acpi/acpi.h> | 
 | #endif | 
 | #include <asm/byteorder.h> | 
 | #include <asm/system.h> | 
 | #include <asm/io.h> | 
 | #include <asm/mutex.h> | 
 |  | 
 | /* for request_sense */ | 
 | #include <linux/cdrom.h> | 
 |  | 
 | #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) | 
 | # define SUPPORT_VLB_SYNC 0 | 
 | #else | 
 | # define SUPPORT_VLB_SYNC 1 | 
 | #endif | 
 |  | 
 | /* | 
 |  * Probably not wise to fiddle with these | 
 |  */ | 
 | #define IDE_DEFAULT_MAX_FAILURES	1 | 
 | #define ERROR_MAX	8	/* Max read/write errors per sector */ | 
 | #define ERROR_RESET	3	/* Reset controller every 4th retry */ | 
 | #define ERROR_RECAL	1	/* Recalibrate every 2nd retry */ | 
 |  | 
 | /* Error codes returned in rq->errors to the higher part of the driver. */ | 
 | enum { | 
 | 	IDE_DRV_ERROR_GENERAL	= 101, | 
 | 	IDE_DRV_ERROR_FILEMARK	= 102, | 
 | 	IDE_DRV_ERROR_EOD	= 103, | 
 | }; | 
 |  | 
 | /* | 
 |  * Definitions for accessing IDE controller registers | 
 |  */ | 
 | #define IDE_NR_PORTS		(10) | 
 |  | 
 | struct ide_io_ports { | 
 | 	unsigned long	data_addr; | 
 |  | 
 | 	union { | 
 | 		unsigned long error_addr;	/*   read:  error */ | 
 | 		unsigned long feature_addr;	/*  write: feature */ | 
 | 	}; | 
 |  | 
 | 	unsigned long	nsect_addr; | 
 | 	unsigned long	lbal_addr; | 
 | 	unsigned long	lbam_addr; | 
 | 	unsigned long	lbah_addr; | 
 |  | 
 | 	unsigned long	device_addr; | 
 |  | 
 | 	union { | 
 | 		unsigned long status_addr;	/*  read: status  */ | 
 | 		unsigned long command_addr;	/* write: command */ | 
 | 	}; | 
 |  | 
 | 	unsigned long	ctl_addr; | 
 |  | 
 | 	unsigned long	irq_addr; | 
 | }; | 
 |  | 
 | #define OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good)) | 
 |  | 
 | #define BAD_R_STAT	(ATA_BUSY | ATA_ERR) | 
 | #define BAD_W_STAT	(BAD_R_STAT | ATA_DF) | 
 | #define BAD_STAT	(BAD_R_STAT | ATA_DRQ) | 
 | #define DRIVE_READY	(ATA_DRDY | ATA_DSC) | 
 |  | 
 | #define BAD_CRC		(ATA_ABORTED | ATA_ICRC) | 
 |  | 
 | #define SATA_NR_PORTS		(3)	/* 16 possible ?? */ | 
 |  | 
 | #define SATA_STATUS_OFFSET	(0) | 
 | #define SATA_ERROR_OFFSET	(1) | 
 | #define SATA_CONTROL_OFFSET	(2) | 
 |  | 
 | /* | 
 |  * Our Physical Region Descriptor (PRD) table should be large enough | 
 |  * to handle the biggest I/O request we are likely to see.  Since requests | 
 |  * can have no more than 256 sectors, and since the typical blocksize is | 
 |  * two or more sectors, we could get by with a limit of 128 entries here for | 
 |  * the usual worst case.  Most requests seem to include some contiguous blocks, | 
 |  * further reducing the number of table entries required. | 
 |  * | 
 |  * The driver reverts to PIO mode for individual requests that exceed | 
 |  * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling | 
 |  * 100% of all crazy scenarios here is not necessary. | 
 |  * | 
 |  * As it turns out though, we must allocate a full 4KB page for this, | 
 |  * so the two PRD tables (ide0 & ide1) will each get half of that, | 
 |  * allowing each to have about 256 entries (8 bytes each) from this. | 
 |  */ | 
 | #define PRD_BYTES       8 | 
 | #define PRD_ENTRIES	256 | 
 |  | 
 | /* | 
 |  * Some more useful definitions | 
 |  */ | 
 | #define PARTN_BITS	6	/* number of minor dev bits for partitions */ | 
 | #define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */ | 
 | #define SECTOR_SIZE	512 | 
 |  | 
 | /* | 
 |  * Timeouts for various operations: | 
 |  */ | 
 | enum { | 
 | 	/* spec allows up to 20ms */ | 
 | 	WAIT_DRQ	= HZ / 10,	/* 100ms */ | 
 | 	/* some laptops are very slow */ | 
 | 	WAIT_READY	= 5 * HZ,	/* 5s */ | 
 | 	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */ | 
 | 	WAIT_PIDENTIFY	= 10 * HZ,	/* 10s */ | 
 | 	/* worst case when spinning up */ | 
 | 	WAIT_WORSTCASE	= 30 * HZ,	/* 30s */ | 
 | 	/* maximum wait for an IRQ to happen */ | 
 | 	WAIT_CMD	= 10 * HZ,	/* 10s */ | 
 | 	/* Some drives require a longer IRQ timeout. */ | 
 | 	WAIT_FLOPPY_CMD	= 50 * HZ,	/* 50s */ | 
 | 	/* | 
 | 	 * Some drives (for example, Seagate STT3401A Travan) require a very | 
 | 	 * long timeout, because they don't return an interrupt or clear their | 
 | 	 * BSY bit until after the command completes (even retension commands). | 
 | 	 */ | 
 | 	WAIT_TAPE_CMD	= 900 * HZ,	/* 900s */ | 
 | 	/* minimum sleep time */ | 
 | 	WAIT_MIN_SLEEP	= HZ / 50,	/* 20ms */ | 
 | }; | 
 |  | 
 | /* | 
 |  * Op codes for special requests to be handled by ide_special_rq(). | 
 |  * Values should be in the range of 0x20 to 0x3f. | 
 |  */ | 
 | #define REQ_DRIVE_RESET		0x20 | 
 | #define REQ_DEVSET_EXEC		0x21 | 
 | #define REQ_PARK_HEADS		0x22 | 
 | #define REQ_UNPARK_HEADS	0x23 | 
 |  | 
 | /* | 
 |  * hwif_chipset_t is used to keep track of the specific hardware | 
 |  * chipset used by each IDE interface, if known. | 
 |  */ | 
 | enum {		ide_unknown,	ide_generic,	ide_pci, | 
 | 		ide_cmd640,	ide_dtc2278,	ide_ali14xx, | 
 | 		ide_qd65xx,	ide_umc8672,	ide_ht6560b, | 
 | 		ide_4drives,	ide_pmac,	ide_acorn, | 
 | 		ide_au1xxx,	ide_palm3710 | 
 | }; | 
 |  | 
 | typedef u8 hwif_chipset_t; | 
 |  | 
 | /* | 
 |  * Structure to hold all information about the location of this port | 
 |  */ | 
 | struct ide_hw { | 
 | 	union { | 
 | 		struct ide_io_ports	io_ports; | 
 | 		unsigned long		io_ports_array[IDE_NR_PORTS]; | 
 | 	}; | 
 |  | 
 | 	int		irq;			/* our irq number */ | 
 | 	struct device	*dev, *parent; | 
 | 	unsigned long	config; | 
 | }; | 
 |  | 
 | static inline void ide_std_init_ports(struct ide_hw *hw, | 
 | 				      unsigned long io_addr, | 
 | 				      unsigned long ctl_addr) | 
 | { | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i <= 7; i++) | 
 | 		hw->io_ports_array[i] = io_addr++; | 
 |  | 
 | 	hw->io_ports.ctl_addr = ctl_addr; | 
 | } | 
 |  | 
 | #define MAX_HWIFS	10 | 
 |  | 
 | /* | 
 |  * Now for the data we need to maintain per-drive:  ide_drive_t | 
 |  */ | 
 |  | 
 | #define ide_scsi	0x21 | 
 | #define ide_disk	0x20 | 
 | #define ide_optical	0x7 | 
 | #define ide_cdrom	0x5 | 
 | #define ide_tape	0x1 | 
 | #define ide_floppy	0x0 | 
 |  | 
 | /* | 
 |  * Special Driver Flags | 
 |  */ | 
 | enum { | 
 | 	IDE_SFLAG_SET_GEOMETRY		= (1 << 0), | 
 | 	IDE_SFLAG_RECALIBRATE		= (1 << 1), | 
 | 	IDE_SFLAG_SET_MULTMODE		= (1 << 2), | 
 | }; | 
 |  | 
 | /* | 
 |  * Status returned from various ide_ functions | 
 |  */ | 
 | typedef enum { | 
 | 	ide_stopped,	/* no drive operation was started */ | 
 | 	ide_started,	/* a drive operation was started, handler was set */ | 
 | } ide_startstop_t; | 
 |  | 
 | enum { | 
 | 	IDE_VALID_ERROR 		= (1 << 1), | 
 | 	IDE_VALID_FEATURE		= IDE_VALID_ERROR, | 
 | 	IDE_VALID_NSECT 		= (1 << 2), | 
 | 	IDE_VALID_LBAL			= (1 << 3), | 
 | 	IDE_VALID_LBAM			= (1 << 4), | 
 | 	IDE_VALID_LBAH			= (1 << 5), | 
 | 	IDE_VALID_DEVICE		= (1 << 6), | 
 | 	IDE_VALID_LBA			= IDE_VALID_LBAL | | 
 | 					  IDE_VALID_LBAM | | 
 | 					  IDE_VALID_LBAH, | 
 | 	IDE_VALID_OUT_TF		= IDE_VALID_FEATURE | | 
 | 					  IDE_VALID_NSECT | | 
 | 					  IDE_VALID_LBA, | 
 | 	IDE_VALID_IN_TF 		= IDE_VALID_NSECT | | 
 | 					  IDE_VALID_LBA, | 
 | 	IDE_VALID_OUT_HOB		= IDE_VALID_OUT_TF, | 
 | 	IDE_VALID_IN_HOB		= IDE_VALID_ERROR | | 
 | 					  IDE_VALID_NSECT | | 
 | 					  IDE_VALID_LBA, | 
 | }; | 
 |  | 
 | enum { | 
 | 	IDE_TFLAG_LBA48			= (1 << 0), | 
 | 	IDE_TFLAG_WRITE			= (1 << 1), | 
 | 	IDE_TFLAG_CUSTOM_HANDLER	= (1 << 2), | 
 | 	IDE_TFLAG_DMA_PIO_FALLBACK	= (1 << 3), | 
 | 	/* force 16-bit I/O operations */ | 
 | 	IDE_TFLAG_IO_16BIT		= (1 << 4), | 
 | 	/* struct ide_cmd was allocated using kmalloc() */ | 
 | 	IDE_TFLAG_DYN			= (1 << 5), | 
 | 	IDE_TFLAG_FS			= (1 << 6), | 
 | 	IDE_TFLAG_MULTI_PIO		= (1 << 7), | 
 | 	IDE_TFLAG_SET_XFER		= (1 << 8), | 
 | }; | 
 |  | 
 | enum { | 
 | 	IDE_FTFLAG_FLAGGED		= (1 << 0), | 
 | 	IDE_FTFLAG_SET_IN_FLAGS		= (1 << 1), | 
 | 	IDE_FTFLAG_OUT_DATA		= (1 << 2), | 
 | 	IDE_FTFLAG_IN_DATA		= (1 << 3), | 
 | }; | 
 |  | 
 | struct ide_taskfile { | 
 | 	u8	data;		/* 0: data byte (for TASKFILE ioctl) */ | 
 | 	union {			/* 1: */ | 
 | 		u8 error;	/*  read: error */ | 
 | 		u8 feature;	/* write: feature */ | 
 | 	}; | 
 | 	u8	nsect;		/* 2: number of sectors */ | 
 | 	u8	lbal;		/* 3: LBA low */ | 
 | 	u8	lbam;		/* 4: LBA mid */ | 
 | 	u8	lbah;		/* 5: LBA high */ | 
 | 	u8	device;		/* 6: device select */ | 
 | 	union {			/* 7: */ | 
 | 		u8 status;	/*  read: status */ | 
 | 		u8 command;	/* write: command */ | 
 | 	}; | 
 | }; | 
 |  | 
 | struct ide_cmd { | 
 | 	struct ide_taskfile	tf; | 
 | 	struct ide_taskfile	hob; | 
 | 	struct { | 
 | 		struct { | 
 | 			u8		tf; | 
 | 			u8		hob; | 
 | 		} out, in; | 
 | 	} valid; | 
 |  | 
 | 	u16			tf_flags; | 
 | 	u8			ftf_flags;	/* for TASKFILE ioctl */ | 
 | 	int			protocol; | 
 |  | 
 | 	int			sg_nents;	  /* number of sg entries */ | 
 | 	int			orig_sg_nents; | 
 | 	int			sg_dma_direction; /* DMA transfer direction */ | 
 |  | 
 | 	unsigned int		nbytes; | 
 | 	unsigned int		nleft; | 
 | 	unsigned int		last_xfer_len; | 
 |  | 
 | 	struct scatterlist	*cursg; | 
 | 	unsigned int		cursg_ofs; | 
 |  | 
 | 	struct request		*rq;		/* copy of request */ | 
 | }; | 
 |  | 
 | /* ATAPI packet command flags */ | 
 | enum { | 
 | 	/* set when an error is considered normal - no retry (ide-tape) */ | 
 | 	PC_FLAG_ABORT			= (1 << 0), | 
 | 	PC_FLAG_SUPPRESS_ERROR		= (1 << 1), | 
 | 	PC_FLAG_WAIT_FOR_DSC		= (1 << 2), | 
 | 	PC_FLAG_DMA_OK			= (1 << 3), | 
 | 	PC_FLAG_DMA_IN_PROGRESS		= (1 << 4), | 
 | 	PC_FLAG_DMA_ERROR		= (1 << 5), | 
 | 	PC_FLAG_WRITING			= (1 << 6), | 
 | }; | 
 |  | 
 | #define ATAPI_WAIT_PC		(60 * HZ) | 
 |  | 
 | struct ide_atapi_pc { | 
 | 	/* actual packet bytes */ | 
 | 	u8 c[12]; | 
 | 	/* incremented on each retry */ | 
 | 	int retries; | 
 | 	int error; | 
 |  | 
 | 	/* bytes to transfer */ | 
 | 	int req_xfer; | 
 |  | 
 | 	/* the corresponding request */ | 
 | 	struct request *rq; | 
 |  | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* | 
 | 	 * those are more or less driver-specific and some of them are subject | 
 | 	 * to change/removal later. | 
 | 	 */ | 
 | 	unsigned long timeout; | 
 | }; | 
 |  | 
 | struct ide_devset; | 
 | struct ide_driver; | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEACPI | 
 | struct ide_acpi_drive_link; | 
 | struct ide_acpi_hwif_link; | 
 | #endif | 
 |  | 
 | struct ide_drive_s; | 
 |  | 
 | struct ide_disk_ops { | 
 | 	int		(*check)(struct ide_drive_s *, const char *); | 
 | 	int		(*get_capacity)(struct ide_drive_s *); | 
 | 	u64		(*set_capacity)(struct ide_drive_s *, u64); | 
 | 	void		(*setup)(struct ide_drive_s *); | 
 | 	void		(*flush)(struct ide_drive_s *); | 
 | 	int		(*init_media)(struct ide_drive_s *, struct gendisk *); | 
 | 	int		(*set_doorlock)(struct ide_drive_s *, struct gendisk *, | 
 | 					int); | 
 | 	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *, | 
 | 				      sector_t); | 
 | 	int		(*ioctl)(struct ide_drive_s *, struct block_device *, | 
 | 				 fmode_t, unsigned int, unsigned long); | 
 | }; | 
 |  | 
 | /* ATAPI device flags */ | 
 | enum { | 
 | 	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0), | 
 |  | 
 | 	/* ide-cd */ | 
 | 	/* Drive cannot eject the disc. */ | 
 | 	IDE_AFLAG_NO_EJECT		= (1 << 1), | 
 | 	/* Drive is a pre ATAPI 1.2 drive. */ | 
 | 	IDE_AFLAG_PRE_ATAPI12		= (1 << 2), | 
 | 	/* TOC addresses are in BCD. */ | 
 | 	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 3), | 
 | 	/* TOC track numbers are in BCD. */ | 
 | 	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 4), | 
 | 	/* Saved TOC information is current. */ | 
 | 	IDE_AFLAG_TOC_VALID		= (1 << 6), | 
 | 	/* We think that the drive door is locked. */ | 
 | 	IDE_AFLAG_DOOR_LOCKED		= (1 << 7), | 
 | 	/* SET_CD_SPEED command is unsupported. */ | 
 | 	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 8), | 
 | 	IDE_AFLAG_VERTOS_300_SSD	= (1 << 9), | 
 | 	IDE_AFLAG_VERTOS_600_ESD	= (1 << 10), | 
 | 	IDE_AFLAG_SANYO_3CD		= (1 << 11), | 
 | 	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 12), | 
 | 	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 13), | 
 | 	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 14), | 
 |  | 
 | 	/* ide-floppy */ | 
 | 	/* Avoid commands not supported in Clik drive */ | 
 | 	IDE_AFLAG_CLIK_DRIVE		= (1 << 15), | 
 | 	/* Requires BH algorithm for packets */ | 
 | 	IDE_AFLAG_ZIP_DRIVE		= (1 << 16), | 
 | 	/* Supports format progress report */ | 
 | 	IDE_AFLAG_SRFP			= (1 << 17), | 
 |  | 
 | 	/* ide-tape */ | 
 | 	IDE_AFLAG_IGNORE_DSC		= (1 << 18), | 
 | 	/* 0 When the tape position is unknown */ | 
 | 	IDE_AFLAG_ADDRESS_VALID		= (1 <<	19), | 
 | 	/* Device already opened */ | 
 | 	IDE_AFLAG_BUSY			= (1 << 20), | 
 | 	/* Attempt to auto-detect the current user block size */ | 
 | 	IDE_AFLAG_DETECT_BS		= (1 << 21), | 
 | 	/* Currently on a filemark */ | 
 | 	IDE_AFLAG_FILEMARK		= (1 << 22), | 
 | 	/* 0 = no tape is loaded, so we don't rewind after ejecting */ | 
 | 	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 23), | 
 |  | 
 | 	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 24), | 
 | }; | 
 |  | 
 | /* device flags */ | 
 | enum { | 
 | 	/* restore settings after device reset */ | 
 | 	IDE_DFLAG_KEEP_SETTINGS		= (1 << 0), | 
 | 	/* device is using DMA for read/write */ | 
 | 	IDE_DFLAG_USING_DMA		= (1 << 1), | 
 | 	/* okay to unmask other IRQs */ | 
 | 	IDE_DFLAG_UNMASK		= (1 << 2), | 
 | 	/* don't attempt flushes */ | 
 | 	IDE_DFLAG_NOFLUSH		= (1 << 3), | 
 | 	/* DSC overlap */ | 
 | 	IDE_DFLAG_DSC_OVERLAP		= (1 << 4), | 
 | 	/* give potential excess bandwidth */ | 
 | 	IDE_DFLAG_NICE1			= (1 << 5), | 
 | 	/* device is physically present */ | 
 | 	IDE_DFLAG_PRESENT		= (1 << 6), | 
 | 	/* disable Host Protected Area */ | 
 | 	IDE_DFLAG_NOHPA			= (1 << 7), | 
 | 	/* id read from device (synthetic if not set) */ | 
 | 	IDE_DFLAG_ID_READ		= (1 << 8), | 
 | 	IDE_DFLAG_NOPROBE		= (1 << 9), | 
 | 	/* need to do check_media_change() */ | 
 | 	IDE_DFLAG_REMOVABLE		= (1 << 10), | 
 | 	/* needed for removable devices */ | 
 | 	IDE_DFLAG_ATTACH		= (1 << 11), | 
 | 	IDE_DFLAG_FORCED_GEOM		= (1 << 12), | 
 | 	/* disallow setting unmask bit */ | 
 | 	IDE_DFLAG_NO_UNMASK		= (1 << 13), | 
 | 	/* disallow enabling 32-bit I/O */ | 
 | 	IDE_DFLAG_NO_IO_32BIT		= (1 << 14), | 
 | 	/* for removable only: door lock/unlock works */ | 
 | 	IDE_DFLAG_DOORLOCKING		= (1 << 15), | 
 | 	/* disallow DMA */ | 
 | 	IDE_DFLAG_NODMA			= (1 << 16), | 
 | 	/* powermanagment told us not to do anything, so sleep nicely */ | 
 | 	IDE_DFLAG_BLOCKED		= (1 << 17), | 
 | 	/* sleeping & sleep field valid */ | 
 | 	IDE_DFLAG_SLEEPING		= (1 << 18), | 
 | 	IDE_DFLAG_POST_RESET		= (1 << 19), | 
 | 	IDE_DFLAG_UDMA33_WARNED		= (1 << 20), | 
 | 	IDE_DFLAG_LBA48			= (1 << 21), | 
 | 	/* status of write cache */ | 
 | 	IDE_DFLAG_WCACHE		= (1 << 22), | 
 | 	/* used for ignoring ATA_DF */ | 
 | 	IDE_DFLAG_NOWERR		= (1 << 23), | 
 | 	/* retrying in PIO */ | 
 | 	IDE_DFLAG_DMA_PIO_RETRY		= (1 << 24), | 
 | 	IDE_DFLAG_LBA			= (1 << 25), | 
 | 	/* don't unload heads */ | 
 | 	IDE_DFLAG_NO_UNLOAD		= (1 << 26), | 
 | 	/* heads unloaded, please don't reset port */ | 
 | 	IDE_DFLAG_PARKED		= (1 << 27), | 
 | 	IDE_DFLAG_MEDIA_CHANGED		= (1 << 28), | 
 | 	/* write protect */ | 
 | 	IDE_DFLAG_WP			= (1 << 29), | 
 | 	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30), | 
 | 	IDE_DFLAG_NIEN_QUIRK		= (1 << 31), | 
 | }; | 
 |  | 
 | struct ide_drive_s { | 
 | 	char		name[4];	/* drive name, such as "hda" */ | 
 |         char            driver_req[10];	/* requests specific driver */ | 
 |  | 
 | 	struct request_queue	*queue;	/* request queue */ | 
 |  | 
 | 	struct request		*rq;	/* current request */ | 
 | 	void		*driver_data;	/* extra driver data */ | 
 | 	u16			*id;	/* identification info */ | 
 | #ifdef CONFIG_IDE_PROC_FS | 
 | 	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */ | 
 | 	const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */ | 
 | #endif | 
 | 	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */ | 
 |  | 
 | 	const struct ide_disk_ops *disk_ops; | 
 |  | 
 | 	unsigned long dev_flags; | 
 |  | 
 | 	unsigned long sleep;		/* sleep until this time */ | 
 | 	unsigned long timeout;		/* max time to wait for irq */ | 
 |  | 
 | 	u8	special_flags;		/* special action flags */ | 
 |  | 
 | 	u8	select;			/* basic drive/head select reg value */ | 
 | 	u8	retry_pio;		/* retrying dma capable host in pio */ | 
 | 	u8	waiting_for_dma;	/* dma currently in progress */ | 
 | 	u8	dma;			/* atapi dma flag */ | 
 |  | 
 |         u8	init_speed;	/* transfer rate set at boot */ | 
 |         u8	current_speed;	/* current transfer rate set */ | 
 | 	u8	desired_speed;	/* desired transfer rate set */ | 
 |         u8	dn;		/* now wide spread use */ | 
 | 	u8	acoustic;	/* acoustic management */ | 
 | 	u8	media;		/* disk, cdrom, tape, floppy, ... */ | 
 | 	u8	ready_stat;	/* min status value for drive ready */ | 
 | 	u8	mult_count;	/* current multiple sector setting */ | 
 | 	u8	mult_req;	/* requested multiple sector setting */ | 
 | 	u8	io_32bit;	/* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ | 
 | 	u8	bad_wstat;	/* used for ignoring ATA_DF */ | 
 | 	u8	head;		/* "real" number of heads */ | 
 | 	u8	sect;		/* "real" sectors per track */ | 
 | 	u8	bios_head;	/* BIOS/fdisk/LILO number of heads */ | 
 | 	u8	bios_sect;	/* BIOS/fdisk/LILO sectors per track */ | 
 |  | 
 | 	/* delay this long before sending packet command */ | 
 | 	u8 pc_delay; | 
 |  | 
 | 	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */ | 
 | 	unsigned int	cyl;		/* "real" number of cyls */ | 
 | 	void		*drive_data;	/* used by set_pio_mode/dev_select() */ | 
 | 	unsigned int	failures;	/* current failure count */ | 
 | 	unsigned int	max_failures;	/* maximum allowed failure count */ | 
 | 	u64		probed_capacity;/* initial/native media capacity */ | 
 | 	u64		capacity64;	/* total number of sectors */ | 
 |  | 
 | 	int		lun;		/* logical unit */ | 
 | 	int		crc_count;	/* crc counter to reduce drive speed */ | 
 |  | 
 | 	unsigned long	debug_mask;	/* debugging levels switch */ | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEACPI | 
 | 	struct ide_acpi_drive_link *acpidata; | 
 | #endif | 
 | 	struct list_head list; | 
 | 	struct device	gendev; | 
 | 	struct completion gendev_rel_comp;	/* to deal with device release() */ | 
 |  | 
 | 	/* current packet command */ | 
 | 	struct ide_atapi_pc *pc; | 
 |  | 
 | 	/* last failed packet command */ | 
 | 	struct ide_atapi_pc *failed_pc; | 
 |  | 
 | 	/* callback for packet commands */ | 
 | 	int  (*pc_callback)(struct ide_drive_s *, int); | 
 |  | 
 | 	ide_startstop_t (*irq_handler)(struct ide_drive_s *); | 
 |  | 
 | 	unsigned long atapi_flags; | 
 |  | 
 | 	struct ide_atapi_pc request_sense_pc; | 
 |  | 
 | 	/* current sense rq and buffer */ | 
 | 	bool sense_rq_armed; | 
 | 	struct request sense_rq; | 
 | 	struct request_sense sense_data; | 
 | }; | 
 |  | 
 | typedef struct ide_drive_s ide_drive_t; | 
 |  | 
 | #define to_ide_device(dev)		container_of(dev, ide_drive_t, gendev) | 
 |  | 
 | #define to_ide_drv(obj, cont_type)	\ | 
 | 	container_of(obj, struct cont_type, dev) | 
 |  | 
 | #define ide_drv_g(disk, cont_type)	\ | 
 | 	container_of((disk)->private_data, struct cont_type, driver) | 
 |  | 
 | struct ide_port_info; | 
 |  | 
 | struct ide_tp_ops { | 
 | 	void	(*exec_command)(struct hwif_s *, u8); | 
 | 	u8	(*read_status)(struct hwif_s *); | 
 | 	u8	(*read_altstatus)(struct hwif_s *); | 
 | 	void	(*write_devctl)(struct hwif_s *, u8); | 
 |  | 
 | 	void	(*dev_select)(ide_drive_t *); | 
 | 	void	(*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); | 
 | 	void	(*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); | 
 |  | 
 | 	void	(*input_data)(ide_drive_t *, struct ide_cmd *, | 
 | 			      void *, unsigned int); | 
 | 	void	(*output_data)(ide_drive_t *, struct ide_cmd *, | 
 | 			       void *, unsigned int); | 
 | }; | 
 |  | 
 | extern const struct ide_tp_ops default_tp_ops; | 
 |  | 
 | /** | 
 |  * struct ide_port_ops - IDE port operations | 
 |  * | 
 |  * @init_dev:		host specific initialization of a device | 
 |  * @set_pio_mode:	routine to program host for PIO mode | 
 |  * @set_dma_mode:	routine to program host for DMA mode | 
 |  * @reset_poll:		chipset polling based on hba specifics | 
 |  * @pre_reset:		chipset specific changes to default for device-hba resets | 
 |  * @resetproc:		routine to reset controller after a disk reset | 
 |  * @maskproc:		special host masking for drive selection | 
 |  * @quirkproc:		check host's drive quirk list | 
 |  * @clear_irq:		clear IRQ | 
 |  * | 
 |  * @mdma_filter:	filter MDMA modes | 
 |  * @udma_filter:	filter UDMA modes | 
 |  * | 
 |  * @cable_detect:	detect cable type | 
 |  */ | 
 | struct ide_port_ops { | 
 | 	void	(*init_dev)(ide_drive_t *); | 
 | 	void	(*set_pio_mode)(ide_drive_t *, const u8); | 
 | 	void	(*set_dma_mode)(ide_drive_t *, const u8); | 
 | 	int	(*reset_poll)(ide_drive_t *); | 
 | 	void	(*pre_reset)(ide_drive_t *); | 
 | 	void	(*resetproc)(ide_drive_t *); | 
 | 	void	(*maskproc)(ide_drive_t *, int); | 
 | 	void	(*quirkproc)(ide_drive_t *); | 
 | 	void	(*clear_irq)(ide_drive_t *); | 
 | 	int	(*test_irq)(struct hwif_s *); | 
 |  | 
 | 	u8	(*mdma_filter)(ide_drive_t *); | 
 | 	u8	(*udma_filter)(ide_drive_t *); | 
 |  | 
 | 	u8	(*cable_detect)(struct hwif_s *); | 
 | }; | 
 |  | 
 | struct ide_dma_ops { | 
 | 	void	(*dma_host_set)(struct ide_drive_s *, int); | 
 | 	int	(*dma_setup)(struct ide_drive_s *, struct ide_cmd *); | 
 | 	void	(*dma_start)(struct ide_drive_s *); | 
 | 	int	(*dma_end)(struct ide_drive_s *); | 
 | 	int	(*dma_test_irq)(struct ide_drive_s *); | 
 | 	void	(*dma_lost_irq)(struct ide_drive_s *); | 
 | 	/* below ones are optional */ | 
 | 	int	(*dma_check)(struct ide_drive_s *, struct ide_cmd *); | 
 | 	int	(*dma_timer_expiry)(struct ide_drive_s *); | 
 | 	void	(*dma_clear)(struct ide_drive_s *); | 
 | 	/* | 
 | 	 * The following method is optional and only required to be | 
 | 	 * implemented for the SFF-8038i compatible controllers. | 
 | 	 */ | 
 | 	u8	(*dma_sff_read_status)(struct hwif_s *); | 
 | }; | 
 |  | 
 | enum { | 
 | 	IDE_PFLAG_PROBING		= (1 << 0), | 
 | }; | 
 |  | 
 | struct ide_host; | 
 |  | 
 | typedef struct hwif_s { | 
 | 	struct hwif_s *mate;		/* other hwif from same PCI chip */ | 
 | 	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */ | 
 |  | 
 | 	struct ide_host *host; | 
 |  | 
 | 	char name[6];			/* name of interface, eg. "ide0" */ | 
 |  | 
 | 	struct ide_io_ports	io_ports; | 
 |  | 
 | 	unsigned long	sata_scr[SATA_NR_PORTS]; | 
 |  | 
 | 	ide_drive_t	*devices[MAX_DRIVES + 1]; | 
 |  | 
 | 	unsigned long	port_flags; | 
 |  | 
 | 	u8 major;	/* our major number */ | 
 | 	u8 index;	/* 0 for ide0; 1 for ide1; ... */ | 
 | 	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */ | 
 |  | 
 | 	u32 host_flags; | 
 |  | 
 | 	u8 pio_mask; | 
 |  | 
 | 	u8 ultra_mask; | 
 | 	u8 mwdma_mask; | 
 | 	u8 swdma_mask; | 
 |  | 
 | 	u8 cbl;		/* cable type */ | 
 |  | 
 | 	hwif_chipset_t chipset;	/* sub-module for tuning.. */ | 
 |  | 
 | 	struct device *dev; | 
 |  | 
 | 	void (*rw_disk)(ide_drive_t *, struct request *); | 
 |  | 
 | 	const struct ide_tp_ops		*tp_ops; | 
 | 	const struct ide_port_ops	*port_ops; | 
 | 	const struct ide_dma_ops	*dma_ops; | 
 |  | 
 | 	/* dma physical region descriptor table (cpu view) */ | 
 | 	unsigned int	*dmatable_cpu; | 
 | 	/* dma physical region descriptor table (dma view) */ | 
 | 	dma_addr_t	dmatable_dma; | 
 |  | 
 | 	/* maximum number of PRD table entries */ | 
 | 	int prd_max_nents; | 
 | 	/* PRD entry size in bytes */ | 
 | 	int prd_ent_size; | 
 |  | 
 | 	/* Scatter-gather list used to build the above */ | 
 | 	struct scatterlist *sg_table; | 
 | 	int sg_max_nents;		/* Maximum number of entries in it */ | 
 |  | 
 | 	struct ide_cmd cmd;		/* current command */ | 
 |  | 
 | 	int		rqsize;		/* max sectors per request */ | 
 | 	int		irq;		/* our irq number */ | 
 |  | 
 | 	unsigned long	dma_base;	/* base addr for dma ports */ | 
 |  | 
 | 	unsigned long	config_data;	/* for use by chipset-specific code */ | 
 | 	unsigned long	select_data;	/* for use by chipset-specific code */ | 
 |  | 
 | 	unsigned long	extra_base;	/* extra addr for dma ports */ | 
 | 	unsigned	extra_ports;	/* number of extra dma ports */ | 
 |  | 
 | 	unsigned	present    : 1;	/* this interface exists */ | 
 | 	unsigned	busy	   : 1; /* serializes devices on a port */ | 
 |  | 
 | 	struct device		gendev; | 
 | 	struct device		*portdev; | 
 |  | 
 | 	struct completion gendev_rel_comp; /* To deal with device release() */ | 
 |  | 
 | 	void		*hwif_data;	/* extra hwif data */ | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEACPI | 
 | 	struct ide_acpi_hwif_link *acpidata; | 
 | #endif | 
 |  | 
 | 	/* IRQ handler, if active */ | 
 | 	ide_startstop_t	(*handler)(ide_drive_t *); | 
 |  | 
 | 	/* BOOL: polling active & poll_timeout field valid */ | 
 | 	unsigned int polling : 1; | 
 |  | 
 | 	/* current drive */ | 
 | 	ide_drive_t *cur_dev; | 
 |  | 
 | 	/* current request */ | 
 | 	struct request *rq; | 
 |  | 
 | 	/* failsafe timer */ | 
 | 	struct timer_list timer; | 
 | 	/* timeout value during long polls */ | 
 | 	unsigned long poll_timeout; | 
 | 	/* queried upon timeouts */ | 
 | 	int (*expiry)(ide_drive_t *); | 
 |  | 
 | 	int req_gen; | 
 | 	int req_gen_timer; | 
 |  | 
 | 	spinlock_t lock; | 
 | } ____cacheline_internodealigned_in_smp ide_hwif_t; | 
 |  | 
 | #define MAX_HOST_PORTS 4 | 
 |  | 
 | struct ide_host { | 
 | 	ide_hwif_t	*ports[MAX_HOST_PORTS + 1]; | 
 | 	unsigned int	n_ports; | 
 | 	struct device	*dev[2]; | 
 |  | 
 | 	int		(*init_chipset)(struct pci_dev *); | 
 |  | 
 | 	void		(*get_lock)(irq_handler_t, void *); | 
 | 	void		(*release_lock)(void); | 
 |  | 
 | 	irq_handler_t	irq_handler; | 
 |  | 
 | 	unsigned long	host_flags; | 
 |  | 
 | 	int		irq_flags; | 
 |  | 
 | 	void		*host_priv; | 
 | 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */ | 
 |  | 
 | 	/* used for hosts requiring serialization */ | 
 | 	volatile unsigned long	host_busy; | 
 | }; | 
 |  | 
 | #define IDE_HOST_BUSY 0 | 
 |  | 
 | /* | 
 |  *  internal ide interrupt handler type | 
 |  */ | 
 | typedef ide_startstop_t (ide_handler_t)(ide_drive_t *); | 
 | typedef int (ide_expiry_t)(ide_drive_t *); | 
 |  | 
 | /* used by ide-cd, ide-floppy, etc. */ | 
 | typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned); | 
 |  | 
 | extern struct mutex ide_setting_mtx; | 
 |  | 
 | /* | 
 |  * configurable drive settings | 
 |  */ | 
 |  | 
 | #define DS_SYNC	(1 << 0) | 
 |  | 
 | struct ide_devset { | 
 | 	int		(*get)(ide_drive_t *); | 
 | 	int		(*set)(ide_drive_t *, int); | 
 | 	unsigned int	flags; | 
 | }; | 
 |  | 
 | #define __DEVSET(_flags, _get, _set) { \ | 
 | 	.flags	= _flags, \ | 
 | 	.get	= _get,	\ | 
 | 	.set	= _set,	\ | 
 | } | 
 |  | 
 | #define ide_devset_get(name, field) \ | 
 | static int get_##name(ide_drive_t *drive) \ | 
 | { \ | 
 | 	return drive->field; \ | 
 | } | 
 |  | 
 | #define ide_devset_set(name, field) \ | 
 | static int set_##name(ide_drive_t *drive, int arg) \ | 
 | { \ | 
 | 	drive->field = arg; \ | 
 | 	return 0; \ | 
 | } | 
 |  | 
 | #define ide_devset_get_flag(name, flag) \ | 
 | static int get_##name(ide_drive_t *drive) \ | 
 | { \ | 
 | 	return !!(drive->dev_flags & flag); \ | 
 | } | 
 |  | 
 | #define ide_devset_set_flag(name, flag) \ | 
 | static int set_##name(ide_drive_t *drive, int arg) \ | 
 | { \ | 
 | 	if (arg) \ | 
 | 		drive->dev_flags |= flag; \ | 
 | 	else \ | 
 | 		drive->dev_flags &= ~flag; \ | 
 | 	return 0; \ | 
 | } | 
 |  | 
 | #define __IDE_DEVSET(_name, _flags, _get, _set) \ | 
 | const struct ide_devset ide_devset_##_name = \ | 
 | 	__DEVSET(_flags, _get, _set) | 
 |  | 
 | #define IDE_DEVSET(_name, _flags, _get, _set) \ | 
 | static __IDE_DEVSET(_name, _flags, _get, _set) | 
 |  | 
 | #define ide_devset_rw(_name, _func) \ | 
 | IDE_DEVSET(_name, 0, get_##_func, set_##_func) | 
 |  | 
 | #define ide_devset_w(_name, _func) \ | 
 | IDE_DEVSET(_name, 0, NULL, set_##_func) | 
 |  | 
 | #define ide_ext_devset_rw(_name, _func) \ | 
 | __IDE_DEVSET(_name, 0, get_##_func, set_##_func) | 
 |  | 
 | #define ide_ext_devset_rw_sync(_name, _func) \ | 
 | __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func) | 
 |  | 
 | #define ide_decl_devset(_name) \ | 
 | extern const struct ide_devset ide_devset_##_name | 
 |  | 
 | ide_decl_devset(io_32bit); | 
 | ide_decl_devset(keepsettings); | 
 | ide_decl_devset(pio_mode); | 
 | ide_decl_devset(unmaskirq); | 
 | ide_decl_devset(using_dma); | 
 |  | 
 | #ifdef CONFIG_IDE_PROC_FS | 
 | /* | 
 |  * /proc/ide interface | 
 |  */ | 
 |  | 
 | #define ide_devset_rw_field(_name, _field) \ | 
 | ide_devset_get(_name, _field); \ | 
 | ide_devset_set(_name, _field); \ | 
 | IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) | 
 |  | 
 | #define ide_devset_rw_flag(_name, _field) \ | 
 | ide_devset_get_flag(_name, _field); \ | 
 | ide_devset_set_flag(_name, _field); \ | 
 | IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name) | 
 |  | 
 | struct ide_proc_devset { | 
 | 	const char		*name; | 
 | 	const struct ide_devset	*setting; | 
 | 	int			min, max; | 
 | 	int			(*mulf)(ide_drive_t *); | 
 | 	int			(*divf)(ide_drive_t *); | 
 | }; | 
 |  | 
 | #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \ | 
 | 	.name = __stringify(_name), \ | 
 | 	.setting = &ide_devset_##_name, \ | 
 | 	.min = _min, \ | 
 | 	.max = _max, \ | 
 | 	.mulf = _mulf, \ | 
 | 	.divf = _divf, \ | 
 | } | 
 |  | 
 | #define IDE_PROC_DEVSET(_name, _min, _max) \ | 
 | __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL) | 
 |  | 
 | typedef struct { | 
 | 	const char	*name; | 
 | 	mode_t		mode; | 
 | 	const struct file_operations *proc_fops; | 
 | } ide_proc_entry_t; | 
 |  | 
 | void proc_ide_create(void); | 
 | void proc_ide_destroy(void); | 
 | void ide_proc_register_port(ide_hwif_t *); | 
 | void ide_proc_port_register_devices(ide_hwif_t *); | 
 | void ide_proc_unregister_device(ide_drive_t *); | 
 | void ide_proc_unregister_port(ide_hwif_t *); | 
 | void ide_proc_register_driver(ide_drive_t *, struct ide_driver *); | 
 | void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *); | 
 |  | 
 | extern const struct file_operations ide_capacity_proc_fops; | 
 | extern const struct file_operations ide_geometry_proc_fops; | 
 | #else | 
 | static inline void proc_ide_create(void) { ; } | 
 | static inline void proc_ide_destroy(void) { ; } | 
 | static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; } | 
 | static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_proc_register_driver(ide_drive_t *drive, | 
 | 					    struct ide_driver *driver) { ; } | 
 | static inline void ide_proc_unregister_driver(ide_drive_t *drive, | 
 | 					      struct ide_driver *driver) { ; } | 
 | #endif | 
 |  | 
 | enum { | 
 | 	/* enter/exit functions */ | 
 | 	IDE_DBG_FUNC =			(1 << 0), | 
 | 	/* sense key/asc handling */ | 
 | 	IDE_DBG_SENSE =			(1 << 1), | 
 | 	/* packet commands handling */ | 
 | 	IDE_DBG_PC =			(1 << 2), | 
 | 	/* request handling */ | 
 | 	IDE_DBG_RQ =			(1 << 3), | 
 | 	/* driver probing/setup */ | 
 | 	IDE_DBG_PROBE =			(1 << 4), | 
 | }; | 
 |  | 
 | /* DRV_NAME has to be defined in the driver before using the macro below */ | 
 | #define __ide_debug_log(lvl, fmt, args...)				\ | 
 | {									\ | 
 | 	if (unlikely(drive->debug_mask & lvl))				\ | 
 | 		printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",		\ | 
 | 					  __func__, ## args);		\ | 
 | } | 
 |  | 
 | /* | 
 |  * Power Management state machine (rq->pm->pm_step). | 
 |  * | 
 |  * For each step, the core calls ide_start_power_step() first. | 
 |  * This can return: | 
 |  *	- ide_stopped :	In this case, the core calls us back again unless | 
 |  *			step have been set to ide_power_state_completed. | 
 |  *	- ide_started :	In this case, the channel is left busy until an | 
 |  *			async event (interrupt) occurs. | 
 |  * Typically, ide_start_power_step() will issue a taskfile request with | 
 |  * do_rw_taskfile(). | 
 |  * | 
 |  * Upon reception of the interrupt, the core will call ide_complete_power_step() | 
 |  * with the error code if any. This routine should update the step value | 
 |  * and return. It should not start a new request. The core will call | 
 |  * ide_start_power_step() for the new step value, unless step have been | 
 |  * set to IDE_PM_COMPLETED. | 
 |  */ | 
 | enum { | 
 | 	IDE_PM_START_SUSPEND, | 
 | 	IDE_PM_FLUSH_CACHE	= IDE_PM_START_SUSPEND, | 
 | 	IDE_PM_STANDBY, | 
 |  | 
 | 	IDE_PM_START_RESUME, | 
 | 	IDE_PM_RESTORE_PIO	= IDE_PM_START_RESUME, | 
 | 	IDE_PM_IDLE, | 
 | 	IDE_PM_RESTORE_DMA, | 
 |  | 
 | 	IDE_PM_COMPLETED, | 
 | }; | 
 |  | 
 | int generic_ide_suspend(struct device *, pm_message_t); | 
 | int generic_ide_resume(struct device *); | 
 |  | 
 | void ide_complete_power_step(ide_drive_t *, struct request *); | 
 | ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *); | 
 | void ide_complete_pm_rq(ide_drive_t *, struct request *); | 
 | void ide_check_pm_state(ide_drive_t *, struct request *); | 
 |  | 
 | /* | 
 |  * Subdrivers support. | 
 |  * | 
 |  * The gendriver.owner field should be set to the module owner of this driver. | 
 |  * The gendriver.name field should be set to the name of this driver | 
 |  */ | 
 | struct ide_driver { | 
 | 	const char			*version; | 
 | 	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, sector_t); | 
 | 	struct device_driver	gen_driver; | 
 | 	int		(*probe)(ide_drive_t *); | 
 | 	void		(*remove)(ide_drive_t *); | 
 | 	void		(*resume)(ide_drive_t *); | 
 | 	void		(*shutdown)(ide_drive_t *); | 
 | #ifdef CONFIG_IDE_PROC_FS | 
 | 	ide_proc_entry_t *		(*proc_entries)(ide_drive_t *); | 
 | 	const struct ide_proc_devset *	(*proc_devsets)(ide_drive_t *); | 
 | #endif | 
 | }; | 
 |  | 
 | #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver) | 
 |  | 
 | int ide_device_get(ide_drive_t *); | 
 | void ide_device_put(ide_drive_t *); | 
 |  | 
 | struct ide_ioctl_devset { | 
 | 	unsigned int	get_ioctl; | 
 | 	unsigned int	set_ioctl; | 
 | 	const struct ide_devset *setting; | 
 | }; | 
 |  | 
 | int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int, | 
 | 		      unsigned long, const struct ide_ioctl_devset *); | 
 |  | 
 | int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long); | 
 |  | 
 | extern int ide_vlb_clk; | 
 | extern int ide_pci_clk; | 
 |  | 
 | int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int); | 
 | void ide_kill_rq(ide_drive_t *, struct request *); | 
 |  | 
 | void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int); | 
 | void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int); | 
 |  | 
 | void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *, | 
 | 			 unsigned int); | 
 |  | 
 | void ide_pad_transfer(ide_drive_t *, int, int); | 
 |  | 
 | ide_startstop_t ide_error(ide_drive_t *, const char *, u8); | 
 |  | 
 | void ide_fix_driveid(u16 *); | 
 |  | 
 | extern void ide_fixstring(u8 *, const int, const int); | 
 |  | 
 | int ide_busy_sleep(ide_drive_t *, unsigned long, int); | 
 |  | 
 | int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *); | 
 | int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); | 
 |  | 
 | ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *); | 
 | ide_startstop_t ide_do_devset(ide_drive_t *, struct request *); | 
 |  | 
 | extern ide_startstop_t ide_do_reset (ide_drive_t *); | 
 |  | 
 | extern int ide_devset_execute(ide_drive_t *drive, | 
 | 			      const struct ide_devset *setting, int arg); | 
 |  | 
 | void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); | 
 | int ide_complete_rq(ide_drive_t *, int, unsigned int); | 
 |  | 
 | void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); | 
 | void ide_tf_dump(const char *, struct ide_cmd *); | 
 |  | 
 | void ide_exec_command(ide_hwif_t *, u8); | 
 | u8 ide_read_status(ide_hwif_t *); | 
 | u8 ide_read_altstatus(ide_hwif_t *); | 
 | void ide_write_devctl(ide_hwif_t *, u8); | 
 |  | 
 | void ide_dev_select(ide_drive_t *); | 
 | void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); | 
 | void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); | 
 |  | 
 | void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); | 
 | void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); | 
 |  | 
 | void SELECT_MASK(ide_drive_t *, int); | 
 |  | 
 | u8 ide_read_error(ide_drive_t *); | 
 | void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *); | 
 |  | 
 | int ide_check_ireason(ide_drive_t *, struct request *, int, int, int); | 
 |  | 
 | int ide_check_atapi_device(ide_drive_t *, const char *); | 
 |  | 
 | void ide_init_pc(struct ide_atapi_pc *); | 
 |  | 
 | /* Disk head parking */ | 
 | extern wait_queue_head_t ide_park_wq; | 
 | ssize_t ide_park_show(struct device *dev, struct device_attribute *attr, | 
 | 		      char *buf); | 
 | ssize_t ide_park_store(struct device *dev, struct device_attribute *attr, | 
 | 		       const char *buf, size_t len); | 
 |  | 
 | /* | 
 |  * Special requests for ide-tape block device strategy routine. | 
 |  * | 
 |  * In order to service a character device command, we add special requests to | 
 |  * the tail of our block device request queue and wait for their completion. | 
 |  */ | 
 | enum { | 
 | 	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */ | 
 | 	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */ | 
 | 	REQ_IDETAPE_READ	= (1 << 2), | 
 | 	REQ_IDETAPE_WRITE	= (1 << 3), | 
 | }; | 
 |  | 
 | int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *, | 
 | 		      void *, unsigned int); | 
 |  | 
 | int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *); | 
 | int ide_do_start_stop(ide_drive_t *, struct gendisk *, int); | 
 | int ide_set_media_lock(ide_drive_t *, struct gendisk *, int); | 
 | void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *); | 
 | void ide_retry_pc(ide_drive_t *drive); | 
 |  | 
 | void ide_prep_sense(ide_drive_t *drive, struct request *rq); | 
 | int ide_queue_sense_rq(ide_drive_t *drive, void *special); | 
 |  | 
 | int ide_cd_expiry(ide_drive_t *); | 
 |  | 
 | int ide_cd_get_xferlen(struct request *); | 
 |  | 
 | ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *); | 
 |  | 
 | ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *); | 
 |  | 
 | void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int); | 
 |  | 
 | void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8); | 
 |  | 
 | int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16); | 
 | int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *); | 
 |  | 
 | int ide_taskfile_ioctl(ide_drive_t *, unsigned long); | 
 |  | 
 | int ide_dev_read_id(ide_drive_t *, u8, u16 *, int); | 
 |  | 
 | extern int ide_driveid_update(ide_drive_t *); | 
 | extern int ide_config_drive_speed(ide_drive_t *, u8); | 
 | extern u8 eighty_ninty_three (ide_drive_t *); | 
 | extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *); | 
 |  | 
 | extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout); | 
 |  | 
 | extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout); | 
 |  | 
 | extern void ide_timer_expiry(unsigned long); | 
 | extern irqreturn_t ide_intr(int irq, void *dev_id); | 
 | extern void do_ide_request(struct request_queue *); | 
 |  | 
 | void ide_init_disk(struct gendisk *, ide_drive_t *); | 
 |  | 
 | #ifdef CONFIG_IDEPCI_PCIBUS_ORDER | 
 | extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); | 
 | #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) | 
 | #else | 
 | #define ide_pci_register_driver(d) pci_register_driver(d) | 
 | #endif | 
 |  | 
 | static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev) | 
 | { | 
 | 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, | 
 | 			 struct ide_hw *, struct ide_hw **); | 
 | void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEDMA_PCI | 
 | int ide_pci_set_master(struct pci_dev *, const char *); | 
 | unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); | 
 | int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); | 
 | int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); | 
 | #else | 
 | static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, | 
 | 				     const struct ide_port_info *d) | 
 | { | 
 | 	return -EINVAL; | 
 | } | 
 | #endif | 
 |  | 
 | struct ide_pci_enablebit { | 
 | 	u8	reg;	/* byte pci reg holding the enable-bit */ | 
 | 	u8	mask;	/* mask to isolate the enable-bit */ | 
 | 	u8	val;	/* value of masked reg when "enabled" */ | 
 | }; | 
 |  | 
 | enum { | 
 | 	/* Uses ISA control ports not PCI ones. */ | 
 | 	IDE_HFLAG_ISA_PORTS		= (1 << 0), | 
 | 	/* single port device */ | 
 | 	IDE_HFLAG_SINGLE		= (1 << 1), | 
 | 	/* don't use legacy PIO blacklist */ | 
 | 	IDE_HFLAG_PIO_NO_BLACKLIST	= (1 << 2), | 
 | 	/* set for the second port of QD65xx */ | 
 | 	IDE_HFLAG_QD_2ND_PORT		= (1 << 3), | 
 | 	/* use PIO8/9 for prefetch off/on */ | 
 | 	IDE_HFLAG_ABUSE_PREFETCH	= (1 << 4), | 
 | 	/* use PIO6/7 for fast-devsel off/on */ | 
 | 	IDE_HFLAG_ABUSE_FAST_DEVSEL	= (1 << 5), | 
 | 	/* use 100-102 and 200-202 PIO values to set DMA modes */ | 
 | 	IDE_HFLAG_ABUSE_DMA_MODES	= (1 << 6), | 
 | 	/* | 
 | 	 * keep DMA setting when programming PIO mode, may be used only | 
 | 	 * for hosts which have separate PIO and DMA timings (ie. PMAC) | 
 | 	 */ | 
 | 	IDE_HFLAG_SET_PIO_MODE_KEEP_DMA	= (1 << 7), | 
 | 	/* program host for the transfer mode after programming device */ | 
 | 	IDE_HFLAG_POST_SET_MODE		= (1 << 8), | 
 | 	/* don't program host/device for the transfer mode ("smart" hosts) */ | 
 | 	IDE_HFLAG_NO_SET_MODE		= (1 << 9), | 
 | 	/* trust BIOS for programming chipset/device for DMA */ | 
 | 	IDE_HFLAG_TRUST_BIOS_FOR_DMA	= (1 << 10), | 
 | 	/* host is CS5510/CS5520 */ | 
 | 	IDE_HFLAG_CS5520		= (1 << 11), | 
 | 	/* ATAPI DMA is unsupported */ | 
 | 	IDE_HFLAG_NO_ATAPI_DMA		= (1 << 12), | 
 | 	/* set if host is a "non-bootable" controller */ | 
 | 	IDE_HFLAG_NON_BOOTABLE		= (1 << 13), | 
 | 	/* host doesn't support DMA */ | 
 | 	IDE_HFLAG_NO_DMA		= (1 << 14), | 
 | 	/* check if host is PCI IDE device before allowing DMA */ | 
 | 	IDE_HFLAG_NO_AUTODMA		= (1 << 15), | 
 | 	/* host uses MMIO */ | 
 | 	IDE_HFLAG_MMIO			= (1 << 16), | 
 | 	/* no LBA48 */ | 
 | 	IDE_HFLAG_NO_LBA48		= (1 << 17), | 
 | 	/* no LBA48 DMA */ | 
 | 	IDE_HFLAG_NO_LBA48_DMA		= (1 << 18), | 
 | 	/* data FIFO is cleared by an error */ | 
 | 	IDE_HFLAG_ERROR_STOPS_FIFO	= (1 << 19), | 
 | 	/* serialize ports */ | 
 | 	IDE_HFLAG_SERIALIZE		= (1 << 20), | 
 | 	/* host is DTC2278 */ | 
 | 	IDE_HFLAG_DTC2278		= (1 << 21), | 
 | 	/* 4 devices on a single set of I/O ports */ | 
 | 	IDE_HFLAG_4DRIVES		= (1 << 22), | 
 | 	/* host is TRM290 */ | 
 | 	IDE_HFLAG_TRM290		= (1 << 23), | 
 | 	/* use 32-bit I/O ops */ | 
 | 	IDE_HFLAG_IO_32BIT		= (1 << 24), | 
 | 	/* unmask IRQs */ | 
 | 	IDE_HFLAG_UNMASK_IRQS		= (1 << 25), | 
 | 	IDE_HFLAG_BROKEN_ALTSTATUS	= (1 << 26), | 
 | 	/* serialize ports if DMA is possible (for sl82c105) */ | 
 | 	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27), | 
 | 	/* force host out of "simplex" mode */ | 
 | 	IDE_HFLAG_CLEAR_SIMPLEX		= (1 << 28), | 
 | 	/* DSC overlap is unsupported */ | 
 | 	IDE_HFLAG_NO_DSC		= (1 << 29), | 
 | 	/* never use 32-bit I/O ops */ | 
 | 	IDE_HFLAG_NO_IO_32BIT		= (1 << 30), | 
 | 	/* never unmask IRQs */ | 
 | 	IDE_HFLAG_NO_UNMASK_IRQS	= (1 << 31), | 
 | }; | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_OFFBOARD | 
 | # define IDE_HFLAG_OFF_BOARD	0 | 
 | #else | 
 | # define IDE_HFLAG_OFF_BOARD	IDE_HFLAG_NON_BOOTABLE | 
 | #endif | 
 |  | 
 | struct ide_port_info { | 
 | 	char			*name; | 
 |  | 
 | 	int			(*init_chipset)(struct pci_dev *); | 
 |  | 
 | 	void			(*get_lock)(irq_handler_t, void *); | 
 | 	void			(*release_lock)(void); | 
 |  | 
 | 	void			(*init_iops)(ide_hwif_t *); | 
 | 	void                    (*init_hwif)(ide_hwif_t *); | 
 | 	int			(*init_dma)(ide_hwif_t *, | 
 | 					    const struct ide_port_info *); | 
 |  | 
 | 	const struct ide_tp_ops		*tp_ops; | 
 | 	const struct ide_port_ops	*port_ops; | 
 | 	const struct ide_dma_ops	*dma_ops; | 
 |  | 
 | 	struct ide_pci_enablebit	enablebits[2]; | 
 |  | 
 | 	hwif_chipset_t		chipset; | 
 |  | 
 | 	u16			max_sectors;	/* if < than the default one */ | 
 |  | 
 | 	u32			host_flags; | 
 |  | 
 | 	int			irq_flags; | 
 |  | 
 | 	u8			pio_mask; | 
 | 	u8			swdma_mask; | 
 | 	u8			mwdma_mask; | 
 | 	u8			udma_mask; | 
 | }; | 
 |  | 
 | int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *); | 
 | int ide_pci_init_two(struct pci_dev *, struct pci_dev *, | 
 | 		     const struct ide_port_info *, void *); | 
 | void ide_pci_remove(struct pci_dev *); | 
 |  | 
 | #ifdef CONFIG_PM | 
 | int ide_pci_suspend(struct pci_dev *, pm_message_t); | 
 | int ide_pci_resume(struct pci_dev *); | 
 | #else | 
 | #define ide_pci_suspend NULL | 
 | #define ide_pci_resume NULL | 
 | #endif | 
 |  | 
 | void ide_map_sg(ide_drive_t *, struct ide_cmd *); | 
 | void ide_init_sg_cmd(struct ide_cmd *, unsigned int); | 
 |  | 
 | #define BAD_DMA_DRIVE		0 | 
 | #define GOOD_DMA_DRIVE		1 | 
 |  | 
 | struct drive_list_entry { | 
 | 	const char *id_model; | 
 | 	const char *id_firmware; | 
 | }; | 
 |  | 
 | int ide_in_drive_list(u16 *, const struct drive_list_entry *); | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEDMA | 
 | int ide_dma_good_drive(ide_drive_t *); | 
 | int __ide_dma_bad_drive(ide_drive_t *); | 
 |  | 
 | u8 ide_find_dma_mode(ide_drive_t *, u8); | 
 |  | 
 | static inline u8 ide_max_dma_mode(ide_drive_t *drive) | 
 | { | 
 | 	return ide_find_dma_mode(drive, XFER_UDMA_6); | 
 | } | 
 |  | 
 | void ide_dma_off_quietly(ide_drive_t *); | 
 | void ide_dma_off(ide_drive_t *); | 
 | void ide_dma_on(ide_drive_t *); | 
 | int ide_set_dma(ide_drive_t *); | 
 | void ide_check_dma_crc(ide_drive_t *); | 
 | ide_startstop_t ide_dma_intr(ide_drive_t *); | 
 |  | 
 | int ide_allocate_dma_engine(ide_hwif_t *); | 
 | void ide_release_dma_engine(ide_hwif_t *); | 
 |  | 
 | int ide_dma_prepare(ide_drive_t *, struct ide_cmd *); | 
 | void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *); | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEDMA_SFF | 
 | int config_drive_for_dma(ide_drive_t *); | 
 | int ide_build_dmatable(ide_drive_t *, struct ide_cmd *); | 
 | void ide_dma_host_set(ide_drive_t *, int); | 
 | int ide_dma_setup(ide_drive_t *, struct ide_cmd *); | 
 | extern void ide_dma_start(ide_drive_t *); | 
 | int ide_dma_end(ide_drive_t *); | 
 | int ide_dma_test_irq(ide_drive_t *); | 
 | int ide_dma_sff_timer_expiry(ide_drive_t *); | 
 | u8 ide_dma_sff_read_status(ide_hwif_t *); | 
 | extern const struct ide_dma_ops sff_dma_ops; | 
 | #else | 
 | static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; } | 
 | #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ | 
 |  | 
 | void ide_dma_lost_irq(ide_drive_t *); | 
 | ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int); | 
 |  | 
 | #else | 
 | static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } | 
 | static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } | 
 | static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } | 
 | static inline void ide_dma_off(ide_drive_t *drive) { ; } | 
 | static inline void ide_dma_on(ide_drive_t *drive) { ; } | 
 | static inline void ide_dma_verbose(ide_drive_t *drive) { ; } | 
 | static inline int ide_set_dma(ide_drive_t *drive) { return 1; } | 
 | static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } | 
 | static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; } | 
 | static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; } | 
 | static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; } | 
 | static inline int ide_dma_prepare(ide_drive_t *drive, | 
 | 				  struct ide_cmd *cmd) { return 1; } | 
 | static inline void ide_dma_unmap_sg(ide_drive_t *drive, | 
 | 				    struct ide_cmd *cmd) { ; } | 
 | #endif /* CONFIG_BLK_DEV_IDEDMA */ | 
 |  | 
 | #ifdef CONFIG_BLK_DEV_IDEACPI | 
 | int ide_acpi_init(void); | 
 | bool ide_port_acpi(ide_hwif_t *hwif); | 
 | extern int ide_acpi_exec_tfs(ide_drive_t *drive); | 
 | extern void ide_acpi_get_timing(ide_hwif_t *hwif); | 
 | extern void ide_acpi_push_timing(ide_hwif_t *hwif); | 
 | void ide_acpi_init_port(ide_hwif_t *); | 
 | void ide_acpi_port_init_devices(ide_hwif_t *); | 
 | extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); | 
 | #else | 
 | static inline int ide_acpi_init(void) { return 0; } | 
 | static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; } | 
 | static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } | 
 | static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; } | 
 | static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} | 
 | #endif | 
 |  | 
 | void ide_register_region(struct gendisk *); | 
 | void ide_unregister_region(struct gendisk *); | 
 |  | 
 | void ide_check_nien_quirk_list(ide_drive_t *); | 
 | void ide_undecoded_slave(ide_drive_t *); | 
 |  | 
 | void ide_port_apply_params(ide_hwif_t *); | 
 | int ide_sysfs_register_port(ide_hwif_t *); | 
 |  | 
 | struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **, | 
 | 				unsigned int); | 
 | void ide_host_free(struct ide_host *); | 
 | int ide_host_register(struct ide_host *, const struct ide_port_info *, | 
 | 		      struct ide_hw **); | 
 | int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int, | 
 | 		 struct ide_host **); | 
 | void ide_host_remove(struct ide_host *); | 
 | int ide_legacy_device_add(const struct ide_port_info *, unsigned long); | 
 | void ide_port_unregister_devices(ide_hwif_t *); | 
 | void ide_port_scan(ide_hwif_t *); | 
 |  | 
 | static inline void *ide_get_hwifdata (ide_hwif_t * hwif) | 
 | { | 
 | 	return hwif->hwif_data; | 
 | } | 
 |  | 
 | static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) | 
 | { | 
 | 	hwif->hwif_data = data; | 
 | } | 
 |  | 
 | extern void ide_toggle_bounce(ide_drive_t *drive, int on); | 
 |  | 
 | u64 ide_get_lba_addr(struct ide_cmd *, int); | 
 | u8 ide_dump_status(ide_drive_t *, const char *, u8); | 
 |  | 
 | struct ide_timing { | 
 | 	u8  mode; | 
 | 	u8  setup;	/* t1 */ | 
 | 	u16 act8b;	/* t2 for 8-bit io */ | 
 | 	u16 rec8b;	/* t2i for 8-bit io */ | 
 | 	u16 cyc8b;	/* t0 for 8-bit io */ | 
 | 	u16 active;	/* t2 or tD */ | 
 | 	u16 recover;	/* t2i or tK */ | 
 | 	u16 cycle;	/* t0 */ | 
 | 	u16 udma;	/* t2CYCTYP/2 */ | 
 | }; | 
 |  | 
 | enum { | 
 | 	IDE_TIMING_SETUP	= (1 << 0), | 
 | 	IDE_TIMING_ACT8B	= (1 << 1), | 
 | 	IDE_TIMING_REC8B	= (1 << 2), | 
 | 	IDE_TIMING_CYC8B	= (1 << 3), | 
 | 	IDE_TIMING_8BIT		= IDE_TIMING_ACT8B | IDE_TIMING_REC8B | | 
 | 				  IDE_TIMING_CYC8B, | 
 | 	IDE_TIMING_ACTIVE	= (1 << 4), | 
 | 	IDE_TIMING_RECOVER	= (1 << 5), | 
 | 	IDE_TIMING_CYCLE	= (1 << 6), | 
 | 	IDE_TIMING_UDMA		= (1 << 7), | 
 | 	IDE_TIMING_ALL		= IDE_TIMING_SETUP | IDE_TIMING_8BIT | | 
 | 				  IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER | | 
 | 				  IDE_TIMING_CYCLE | IDE_TIMING_UDMA, | 
 | }; | 
 |  | 
 | struct ide_timing *ide_timing_find_mode(u8); | 
 | u16 ide_pio_cycle_time(ide_drive_t *, u8); | 
 | void ide_timing_merge(struct ide_timing *, struct ide_timing *, | 
 | 		      struct ide_timing *, unsigned int); | 
 | int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); | 
 |  | 
 | #ifdef CONFIG_IDE_XFER_MODE | 
 | int ide_scan_pio_blacklist(char *); | 
 | const char *ide_xfer_verbose(u8); | 
 | u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); | 
 | int ide_pio_need_iordy(ide_drive_t *, const u8); | 
 | int ide_set_pio_mode(ide_drive_t *, u8); | 
 | int ide_set_dma_mode(ide_drive_t *, u8); | 
 | void ide_set_pio(ide_drive_t *, u8); | 
 | int ide_set_xfer_rate(ide_drive_t *, u8); | 
 | #else | 
 | static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; } | 
 | static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; } | 
 | #endif | 
 |  | 
 | static inline void ide_set_max_pio(ide_drive_t *drive) | 
 | { | 
 | 	ide_set_pio(drive, 255); | 
 | } | 
 |  | 
 | char *ide_media_string(ide_drive_t *); | 
 |  | 
 | extern struct device_attribute ide_dev_attrs[]; | 
 | extern struct bus_type ide_bus_type; | 
 | extern struct class *ide_port_class; | 
 |  | 
 | static inline void ide_dump_identify(u8 *id) | 
 | { | 
 | 	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0); | 
 | } | 
 |  | 
 | static inline int hwif_to_node(ide_hwif_t *hwif) | 
 | { | 
 | 	return hwif->dev ? dev_to_node(hwif->dev) : -1; | 
 | } | 
 |  | 
 | static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive) | 
 | { | 
 | 	ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1]; | 
 |  | 
 | 	return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL; | 
 | } | 
 |  | 
 | static inline void *ide_get_drivedata(ide_drive_t *drive) | 
 | { | 
 | 	return drive->drive_data; | 
 | } | 
 |  | 
 | static inline void ide_set_drivedata(ide_drive_t *drive, void *data) | 
 | { | 
 | 	drive->drive_data = data; | 
 | } | 
 |  | 
 | #define ide_port_for_each_dev(i, dev, port) \ | 
 | 	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) | 
 |  | 
 | #define ide_port_for_each_present_dev(i, dev, port) \ | 
 | 	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \ | 
 | 		if ((dev)->dev_flags & IDE_DFLAG_PRESENT) | 
 |  | 
 | #define ide_host_for_each_port(i, port, host) \ | 
 | 	for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++) | 
 |  | 
 | #endif /* _IDE_H */ |