| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * Fusb300 UDC (USB gadget) | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2010 Faraday Technology Corp. | 
 | 5 |  * | 
 | 6 |  * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> | 
 | 7 |  * | 
 | 8 |  * This program is free software; you can redistribute it and/or modify | 
 | 9 |  * it under the terms of the GNU General Public License as published by | 
 | 10 |  * the Free Software Foundation; version 2 of the License. | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 11 |  */ | 
 | 12 | #include <linux/dma-mapping.h> | 
 | 13 | #include <linux/err.h> | 
 | 14 | #include <linux/interrupt.h> | 
 | 15 | #include <linux/io.h> | 
| Paul Gortmaker | 6eb0de8 | 2011-07-03 16:09:31 -0400 | [diff] [blame] | 16 | #include <linux/module.h> | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 17 | #include <linux/platform_device.h> | 
 | 18 | #include <linux/usb/ch9.h> | 
 | 19 | #include <linux/usb/gadget.h> | 
 | 20 |  | 
 | 21 | #include "fusb300_udc.h" | 
 | 22 |  | 
 | 23 | MODULE_DESCRIPTION("FUSB300  USB gadget driver"); | 
 | 24 | MODULE_LICENSE("GPL"); | 
 | 25 | MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>"); | 
 | 26 | MODULE_ALIAS("platform:fusb300_udc"); | 
 | 27 |  | 
 | 28 | #define DRIVER_VERSION	"20 October 2010" | 
 | 29 |  | 
 | 30 | static const char udc_name[] = "fusb300_udc"; | 
 | 31 | static const char * const fusb300_ep_name[] = { | 
| Dan Carpenter | 6b2e30c | 2011-02-07 20:01:36 +0300 | [diff] [blame] | 32 | 	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9", | 
 | 33 | 	"ep10", "ep11", "ep12", "ep13", "ep14", "ep15" | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 34 | }; | 
 | 35 |  | 
 | 36 | static void done(struct fusb300_ep *ep, struct fusb300_request *req, | 
 | 37 | 		 int status); | 
 | 38 |  | 
 | 39 | static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset, | 
 | 40 | 			       u32 value) | 
 | 41 | { | 
 | 42 | 	u32 reg = ioread32(fusb300->reg + offset); | 
 | 43 |  | 
 | 44 | 	reg |= value; | 
 | 45 | 	iowrite32(reg, fusb300->reg + offset); | 
 | 46 | } | 
 | 47 |  | 
 | 48 | static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset, | 
 | 49 | 				u32 value) | 
 | 50 | { | 
 | 51 | 	u32 reg = ioread32(fusb300->reg + offset); | 
 | 52 |  | 
 | 53 | 	reg &= ~value; | 
 | 54 | 	iowrite32(reg, fusb300->reg + offset); | 
 | 55 | } | 
 | 56 |  | 
 | 57 |  | 
 | 58 | static void fusb300_ep_setting(struct fusb300_ep *ep, | 
 | 59 | 			       struct fusb300_ep_info info) | 
 | 60 | { | 
 | 61 | 	ep->epnum = info.epnum; | 
 | 62 | 	ep->type = info.type; | 
 | 63 | } | 
 | 64 |  | 
 | 65 | static int fusb300_ep_release(struct fusb300_ep *ep) | 
 | 66 | { | 
 | 67 | 	if (!ep->epnum) | 
 | 68 | 		return 0; | 
 | 69 | 	ep->epnum = 0; | 
 | 70 | 	ep->stall = 0; | 
 | 71 | 	ep->wedged = 0; | 
 | 72 | 	return 0; | 
 | 73 | } | 
 | 74 |  | 
 | 75 | static void fusb300_set_fifo_entry(struct fusb300 *fusb300, | 
 | 76 | 				   u32 ep) | 
 | 77 | { | 
 | 78 | 	u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 79 |  | 
 | 80 | 	val &= ~FUSB300_EPSET1_FIFOENTRY_MSK; | 
 | 81 | 	val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM); | 
 | 82 | 	iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 83 | } | 
 | 84 |  | 
 | 85 | static void fusb300_set_start_entry(struct fusb300 *fusb300, | 
 | 86 | 				    u8 ep) | 
 | 87 | { | 
 | 88 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 89 | 	u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM; | 
 | 90 |  | 
 | 91 | 	reg &= ~FUSB300_EPSET1_START_ENTRY_MSK	; | 
 | 92 | 	reg |= FUSB300_EPSET1_START_ENTRY(start_entry); | 
 | 93 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 94 | 	if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) { | 
 | 95 | 		fusb300->fifo_entry_num = 0; | 
 | 96 | 		fusb300->addrofs = 0; | 
 | 97 | 		pr_err("fifo entry is over the maximum number!\n"); | 
 | 98 | 	} else | 
 | 99 | 		fusb300->fifo_entry_num++; | 
 | 100 | } | 
 | 101 |  | 
 | 102 | /* set fusb300_set_start_entry first before fusb300_set_epaddrofs */ | 
 | 103 | static void fusb300_set_epaddrofs(struct fusb300 *fusb300, | 
 | 104 | 				  struct fusb300_ep_info info) | 
 | 105 | { | 
 | 106 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
 | 107 |  | 
 | 108 | 	reg &= ~FUSB300_EPSET2_ADDROFS_MSK; | 
 | 109 | 	reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs); | 
 | 110 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
 | 111 | 	fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM; | 
 | 112 | } | 
 | 113 |  | 
 | 114 | static void ep_fifo_setting(struct fusb300 *fusb300, | 
 | 115 | 			    struct fusb300_ep_info info) | 
 | 116 | { | 
 | 117 | 	fusb300_set_fifo_entry(fusb300, info.epnum); | 
 | 118 | 	fusb300_set_start_entry(fusb300, info.epnum); | 
 | 119 | 	fusb300_set_epaddrofs(fusb300, info); | 
 | 120 | } | 
 | 121 |  | 
 | 122 | static void fusb300_set_eptype(struct fusb300 *fusb300, | 
 | 123 | 			       struct fusb300_ep_info info) | 
 | 124 | { | 
 | 125 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 126 |  | 
 | 127 | 	reg &= ~FUSB300_EPSET1_TYPE_MSK; | 
 | 128 | 	reg |= FUSB300_EPSET1_TYPE(info.type); | 
 | 129 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 130 | } | 
 | 131 |  | 
 | 132 | static void fusb300_set_epdir(struct fusb300 *fusb300, | 
 | 133 | 			      struct fusb300_ep_info info) | 
 | 134 | { | 
 | 135 | 	u32 reg; | 
 | 136 |  | 
 | 137 | 	if (!info.dir_in) | 
 | 138 | 		return; | 
 | 139 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 140 | 	reg &= ~FUSB300_EPSET1_DIR_MSK; | 
 | 141 | 	reg |= FUSB300_EPSET1_DIRIN; | 
 | 142 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 143 | } | 
 | 144 |  | 
 | 145 | static void fusb300_set_ep_active(struct fusb300 *fusb300, | 
 | 146 | 			  u8 ep) | 
 | 147 | { | 
 | 148 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 149 |  | 
 | 150 | 	reg |= FUSB300_EPSET1_ACTEN; | 
 | 151 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
 | 152 | } | 
 | 153 |  | 
 | 154 | static void fusb300_set_epmps(struct fusb300 *fusb300, | 
 | 155 | 			      struct fusb300_ep_info info) | 
 | 156 | { | 
 | 157 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
 | 158 |  | 
 | 159 | 	reg &= ~FUSB300_EPSET2_MPS_MSK; | 
 | 160 | 	reg |= FUSB300_EPSET2_MPS(info.maxpacket); | 
 | 161 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
 | 162 | } | 
 | 163 |  | 
 | 164 | static void fusb300_set_interval(struct fusb300 *fusb300, | 
 | 165 | 				 struct fusb300_ep_info info) | 
 | 166 | { | 
 | 167 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 168 |  | 
 | 169 | 	reg &= ~FUSB300_EPSET1_INTERVAL(0x7); | 
 | 170 | 	reg |= FUSB300_EPSET1_INTERVAL(info.interval); | 
 | 171 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 172 | } | 
 | 173 |  | 
 | 174 | static void fusb300_set_bwnum(struct fusb300 *fusb300, | 
 | 175 | 			      struct fusb300_ep_info info) | 
 | 176 | { | 
 | 177 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 178 |  | 
 | 179 | 	reg &= ~FUSB300_EPSET1_BWNUM(0x3); | 
 | 180 | 	reg |= FUSB300_EPSET1_BWNUM(info.bw_num); | 
 | 181 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
 | 182 | } | 
 | 183 |  | 
 | 184 | static void set_ep_reg(struct fusb300 *fusb300, | 
 | 185 | 		      struct fusb300_ep_info info) | 
 | 186 | { | 
 | 187 | 	fusb300_set_eptype(fusb300, info); | 
 | 188 | 	fusb300_set_epdir(fusb300, info); | 
 | 189 | 	fusb300_set_epmps(fusb300, info); | 
 | 190 |  | 
 | 191 | 	if (info.interval) | 
 | 192 | 		fusb300_set_interval(fusb300, info); | 
 | 193 |  | 
 | 194 | 	if (info.bw_num) | 
 | 195 | 		fusb300_set_bwnum(fusb300, info); | 
 | 196 |  | 
 | 197 | 	fusb300_set_ep_active(fusb300, info.epnum); | 
 | 198 | } | 
 | 199 |  | 
 | 200 | static int config_ep(struct fusb300_ep *ep, | 
 | 201 | 		     const struct usb_endpoint_descriptor *desc) | 
 | 202 | { | 
 | 203 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 204 | 	struct fusb300_ep_info info; | 
 | 205 |  | 
 | 206 | 	ep->desc = desc; | 
 | 207 |  | 
 | 208 | 	info.interval = 0; | 
 | 209 | 	info.addrofs = 0; | 
 | 210 | 	info.bw_num = 0; | 
 | 211 |  | 
 | 212 | 	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; | 
 | 213 | 	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; | 
| Kuninori Morimoto | 29cc889 | 2011-08-23 03:12:03 -0700 | [diff] [blame] | 214 | 	info.maxpacket = usb_endpoint_maxp(desc); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 215 | 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | 
 | 216 |  | 
 | 217 | 	if ((info.type == USB_ENDPOINT_XFER_INT) || | 
 | 218 | 	   (info.type == USB_ENDPOINT_XFER_ISOC)) { | 
 | 219 | 		info.interval = desc->bInterval; | 
 | 220 | 		if (info.type == USB_ENDPOINT_XFER_ISOC) | 
 | 221 | 			info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11); | 
 | 222 | 	} | 
 | 223 |  | 
 | 224 | 	ep_fifo_setting(fusb300, info); | 
 | 225 |  | 
 | 226 | 	set_ep_reg(fusb300, info); | 
 | 227 |  | 
 | 228 | 	fusb300_ep_setting(ep, info); | 
 | 229 |  | 
 | 230 | 	fusb300->ep[info.epnum] = ep; | 
 | 231 |  | 
 | 232 | 	return 0; | 
 | 233 | } | 
 | 234 |  | 
 | 235 | static int fusb300_enable(struct usb_ep *_ep, | 
 | 236 | 			  const struct usb_endpoint_descriptor *desc) | 
 | 237 | { | 
 | 238 | 	struct fusb300_ep *ep; | 
 | 239 |  | 
 | 240 | 	ep = container_of(_ep, struct fusb300_ep, ep); | 
 | 241 |  | 
 | 242 | 	if (ep->fusb300->reenum) { | 
 | 243 | 		ep->fusb300->fifo_entry_num = 0; | 
 | 244 | 		ep->fusb300->addrofs = 0; | 
 | 245 | 		ep->fusb300->reenum = 0; | 
 | 246 | 	} | 
 | 247 |  | 
 | 248 | 	return config_ep(ep, desc); | 
 | 249 | } | 
 | 250 |  | 
 | 251 | static int fusb300_disable(struct usb_ep *_ep) | 
 | 252 | { | 
 | 253 | 	struct fusb300_ep *ep; | 
 | 254 | 	struct fusb300_request *req; | 
 | 255 | 	unsigned long flags; | 
 | 256 |  | 
 | 257 | 	ep = container_of(_ep, struct fusb300_ep, ep); | 
 | 258 |  | 
 | 259 | 	BUG_ON(!ep); | 
 | 260 |  | 
 | 261 | 	while (!list_empty(&ep->queue)) { | 
 | 262 | 		req = list_entry(ep->queue.next, struct fusb300_request, queue); | 
 | 263 | 		spin_lock_irqsave(&ep->fusb300->lock, flags); | 
 | 264 | 		done(ep, req, -ECONNRESET); | 
 | 265 | 		spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
 | 266 | 	} | 
 | 267 |  | 
 | 268 | 	return fusb300_ep_release(ep); | 
 | 269 | } | 
 | 270 |  | 
 | 271 | static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep, | 
 | 272 | 						gfp_t gfp_flags) | 
 | 273 | { | 
 | 274 | 	struct fusb300_request *req; | 
 | 275 |  | 
 | 276 | 	req = kzalloc(sizeof(struct fusb300_request), gfp_flags); | 
 | 277 | 	if (!req) | 
 | 278 | 		return NULL; | 
 | 279 | 	INIT_LIST_HEAD(&req->queue); | 
 | 280 |  | 
 | 281 | 	return &req->req; | 
 | 282 | } | 
 | 283 |  | 
 | 284 | static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req) | 
 | 285 | { | 
 | 286 | 	struct fusb300_request *req; | 
 | 287 |  | 
 | 288 | 	req = container_of(_req, struct fusb300_request, req); | 
 | 289 | 	kfree(req); | 
 | 290 | } | 
 | 291 |  | 
 | 292 | static int enable_fifo_int(struct fusb300_ep *ep) | 
 | 293 | { | 
 | 294 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 295 |  | 
 | 296 | 	if (ep->epnum) { | 
 | 297 | 		fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0, | 
 | 298 | 			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); | 
 | 299 | 	} else { | 
 | 300 | 		pr_err("can't enable_fifo_int ep0\n"); | 
 | 301 | 		return -EINVAL; | 
 | 302 | 	} | 
 | 303 |  | 
 | 304 | 	return 0; | 
 | 305 | } | 
 | 306 |  | 
 | 307 | static int disable_fifo_int(struct fusb300_ep *ep) | 
 | 308 | { | 
 | 309 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 310 |  | 
 | 311 | 	if (ep->epnum) { | 
 | 312 | 		fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0, | 
 | 313 | 			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); | 
 | 314 | 	} else { | 
 | 315 | 		pr_err("can't disable_fifo_int ep0\n"); | 
 | 316 | 		return -EINVAL; | 
 | 317 | 	} | 
 | 318 |  | 
 | 319 | 	return 0; | 
 | 320 | } | 
 | 321 |  | 
 | 322 | static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length) | 
 | 323 | { | 
 | 324 | 	u32 reg; | 
 | 325 |  | 
 | 326 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); | 
 | 327 | 	reg &= ~FUSB300_CSR_LEN_MSK; | 
 | 328 | 	reg |= FUSB300_CSR_LEN(length); | 
 | 329 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR); | 
 | 330 | } | 
 | 331 |  | 
 | 332 | /* write data to cx fifo */ | 
 | 333 | static void fusb300_wrcxf(struct fusb300_ep *ep, | 
 | 334 | 		   struct fusb300_request *req) | 
 | 335 | { | 
 | 336 | 	int i = 0; | 
 | 337 | 	u8 *tmp; | 
 | 338 | 	u32 data; | 
 | 339 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 340 | 	u32 length = req->req.length - req->req.actual; | 
 | 341 |  | 
 | 342 | 	tmp = req->req.buf + req->req.actual; | 
 | 343 |  | 
 | 344 | 	if (length > SS_CTL_MAX_PACKET_SIZE) { | 
 | 345 | 		fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE); | 
 | 346 | 		for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) { | 
 | 347 | 			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | | 
 | 348 | 				*(tmp + 3) << 24; | 
 | 349 | 			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 350 | 			tmp += 4; | 
 | 351 | 		} | 
 | 352 | 		req->req.actual += SS_CTL_MAX_PACKET_SIZE; | 
 | 353 | 	} else { /* length is less than max packet size */ | 
 | 354 | 		fusb300_set_cxlen(fusb300, length); | 
 | 355 | 		for (i = length >> 2; i > 0; i--) { | 
 | 356 | 			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | | 
 | 357 | 				*(tmp + 3) << 24; | 
 | 358 | 			printk(KERN_DEBUG "    0x%x\n", data); | 
 | 359 | 			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 360 | 			tmp = tmp + 4; | 
 | 361 | 		} | 
 | 362 | 		switch (length % 4) { | 
 | 363 | 		case 1: | 
 | 364 | 			data = *tmp; | 
 | 365 | 			printk(KERN_DEBUG "    0x%x\n", data); | 
 | 366 | 			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 367 | 			break; | 
 | 368 | 		case 2: | 
 | 369 | 			data = *tmp | *(tmp + 1) << 8; | 
 | 370 | 			printk(KERN_DEBUG "    0x%x\n", data); | 
 | 371 | 			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 372 | 			break; | 
 | 373 | 		case 3: | 
 | 374 | 			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; | 
 | 375 | 			printk(KERN_DEBUG "    0x%x\n", data); | 
 | 376 | 			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 377 | 			break; | 
 | 378 | 		default: | 
 | 379 | 			break; | 
 | 380 | 		} | 
 | 381 | 		req->req.actual += length; | 
 | 382 | 	} | 
 | 383 | } | 
 | 384 |  | 
 | 385 | static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep) | 
 | 386 | { | 
 | 387 | 	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), | 
 | 388 | 		FUSB300_EPSET0_STL); | 
 | 389 | } | 
 | 390 |  | 
 | 391 | static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) | 
 | 392 | { | 
 | 393 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
 | 394 |  | 
 | 395 | 	if (reg & FUSB300_EPSET0_STL) { | 
 | 396 | 		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); | 
 | 397 | 		reg &= ~FUSB300_EPSET0_STL; | 
 | 398 | 		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
 | 399 | 	} | 
 | 400 | } | 
 | 401 |  | 
 | 402 | static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req) | 
 | 403 | { | 
 | 404 | 	if (ep->fusb300->ep0_dir) { /* if IN */ | 
 | 405 | 		if (req->req.length) { | 
 | 406 | 			fusb300_wrcxf(ep, req); | 
 | 407 | 		} else | 
 | 408 | 			printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", | 
 | 409 | 				__func__, req->req.length); | 
 | 410 | 		if ((req->req.length == req->req.actual) || | 
 | 411 | 		    (req->req.actual < ep->ep.maxpacket)) | 
 | 412 | 			done(ep, req, 0); | 
 | 413 | 	} else { /* OUT */ | 
 | 414 | 		if (!req->req.length) | 
 | 415 | 			done(ep, req, 0); | 
 | 416 | 		else | 
 | 417 | 			fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1, | 
 | 418 | 				FUSB300_IGER1_CX_OUT_INT); | 
 | 419 | 	} | 
 | 420 | } | 
 | 421 |  | 
 | 422 | static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, | 
 | 423 | 			 gfp_t gfp_flags) | 
 | 424 | { | 
 | 425 | 	struct fusb300_ep *ep; | 
 | 426 | 	struct fusb300_request *req; | 
 | 427 | 	unsigned long flags; | 
 | 428 | 	int request  = 0; | 
 | 429 |  | 
 | 430 | 	ep = container_of(_ep, struct fusb300_ep, ep); | 
 | 431 | 	req = container_of(_req, struct fusb300_request, req); | 
 | 432 |  | 
 | 433 | 	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) | 
 | 434 | 		return -ESHUTDOWN; | 
 | 435 |  | 
 | 436 | 	spin_lock_irqsave(&ep->fusb300->lock, flags); | 
 | 437 |  | 
 | 438 | 	if (list_empty(&ep->queue)) | 
 | 439 | 		request = 1; | 
 | 440 |  | 
 | 441 | 	list_add_tail(&req->queue, &ep->queue); | 
 | 442 |  | 
 | 443 | 	req->req.actual = 0; | 
 | 444 | 	req->req.status = -EINPROGRESS; | 
 | 445 |  | 
 | 446 | 	if (ep->desc == NULL) /* ep0 */ | 
 | 447 | 		ep0_queue(ep, req); | 
 | 448 | 	else if (request && !ep->stall) | 
 | 449 | 		enable_fifo_int(ep); | 
 | 450 |  | 
 | 451 | 	spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
 | 452 |  | 
 | 453 | 	return 0; | 
 | 454 | } | 
 | 455 |  | 
 | 456 | static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req) | 
 | 457 | { | 
 | 458 | 	struct fusb300_ep *ep; | 
 | 459 | 	struct fusb300_request *req; | 
 | 460 | 	unsigned long flags; | 
 | 461 |  | 
 | 462 | 	ep = container_of(_ep, struct fusb300_ep, ep); | 
 | 463 | 	req = container_of(_req, struct fusb300_request, req); | 
 | 464 |  | 
 | 465 | 	spin_lock_irqsave(&ep->fusb300->lock, flags); | 
 | 466 | 	if (!list_empty(&ep->queue)) | 
 | 467 | 		done(ep, req, -ECONNRESET); | 
 | 468 | 	spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
 | 469 |  | 
 | 470 | 	return 0; | 
 | 471 | } | 
 | 472 |  | 
 | 473 | static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) | 
 | 474 | { | 
 | 475 | 	struct fusb300_ep *ep; | 
 | 476 | 	struct fusb300 *fusb300; | 
 | 477 | 	unsigned long flags; | 
 | 478 | 	int ret = 0; | 
 | 479 |  | 
 | 480 | 	ep = container_of(_ep, struct fusb300_ep, ep); | 
 | 481 |  | 
 | 482 | 	fusb300 = ep->fusb300; | 
 | 483 |  | 
 | 484 | 	spin_lock_irqsave(&ep->fusb300->lock, flags); | 
 | 485 |  | 
 | 486 | 	if (!list_empty(&ep->queue)) { | 
 | 487 | 		ret = -EAGAIN; | 
 | 488 | 		goto out; | 
 | 489 | 	} | 
 | 490 |  | 
 | 491 | 	if (value) { | 
 | 492 | 		fusb300_set_epnstall(fusb300, ep->epnum); | 
 | 493 | 		ep->stall = 1; | 
 | 494 | 		if (wedge) | 
 | 495 | 			ep->wedged = 1; | 
 | 496 | 	} else { | 
 | 497 | 		fusb300_clear_epnstall(fusb300, ep->epnum); | 
 | 498 | 		ep->stall = 0; | 
 | 499 | 		ep->wedged = 0; | 
 | 500 | 	} | 
 | 501 |  | 
 | 502 | out: | 
 | 503 | 	spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
 | 504 | 	return ret; | 
 | 505 | } | 
 | 506 |  | 
 | 507 | static int fusb300_set_halt(struct usb_ep *_ep, int value) | 
 | 508 | { | 
 | 509 | 	return fusb300_set_halt_and_wedge(_ep, value, 0); | 
 | 510 | } | 
 | 511 |  | 
 | 512 | static int fusb300_set_wedge(struct usb_ep *_ep) | 
 | 513 | { | 
 | 514 | 	return fusb300_set_halt_and_wedge(_ep, 1, 1); | 
 | 515 | } | 
 | 516 |  | 
 | 517 | static void fusb300_fifo_flush(struct usb_ep *_ep) | 
 | 518 | { | 
 | 519 | } | 
 | 520 |  | 
 | 521 | static struct usb_ep_ops fusb300_ep_ops = { | 
 | 522 | 	.enable		= fusb300_enable, | 
 | 523 | 	.disable	= fusb300_disable, | 
 | 524 |  | 
 | 525 | 	.alloc_request	= fusb300_alloc_request, | 
 | 526 | 	.free_request	= fusb300_free_request, | 
 | 527 |  | 
 | 528 | 	.queue		= fusb300_queue, | 
 | 529 | 	.dequeue	= fusb300_dequeue, | 
 | 530 |  | 
 | 531 | 	.set_halt	= fusb300_set_halt, | 
 | 532 | 	.fifo_flush	= fusb300_fifo_flush, | 
 | 533 | 	.set_wedge	= fusb300_set_wedge, | 
 | 534 | }; | 
 | 535 |  | 
 | 536 | /*****************************************************************************/ | 
 | 537 | static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset, | 
 | 538 | 		       u32 value) | 
 | 539 | { | 
 | 540 | 	iowrite32(value, fusb300->reg + offset); | 
 | 541 | } | 
 | 542 |  | 
 | 543 | static void fusb300_reset(void) | 
 | 544 | { | 
 | 545 | } | 
 | 546 |  | 
 | 547 | static void fusb300_set_cxstall(struct fusb300 *fusb300) | 
 | 548 | { | 
 | 549 | 	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, | 
 | 550 | 			   FUSB300_CSR_STL); | 
 | 551 | } | 
 | 552 |  | 
 | 553 | static void fusb300_set_cxdone(struct fusb300 *fusb300) | 
 | 554 | { | 
 | 555 | 	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, | 
 | 556 | 			   FUSB300_CSR_DONE); | 
 | 557 | } | 
 | 558 |  | 
 | 559 | /* read data from cx fifo */ | 
 | 560 | void fusb300_rdcxf(struct fusb300 *fusb300, | 
 | 561 | 		   u8 *buffer, u32 length) | 
 | 562 | { | 
 | 563 | 	int i = 0; | 
 | 564 | 	u8 *tmp; | 
 | 565 | 	u32 data; | 
 | 566 |  | 
 | 567 | 	tmp = buffer; | 
 | 568 |  | 
 | 569 | 	for (i = (length >> 2); i > 0; i--) { | 
 | 570 | 		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 571 | 		printk(KERN_DEBUG "    0x%x\n", data); | 
 | 572 | 		*tmp = data & 0xFF; | 
 | 573 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 574 | 		*(tmp + 2) = (data >> 16) & 0xFF; | 
 | 575 | 		*(tmp + 3) = (data >> 24) & 0xFF; | 
 | 576 | 		tmp = tmp + 4; | 
 | 577 | 	} | 
 | 578 |  | 
 | 579 | 	switch (length % 4) { | 
 | 580 | 	case 1: | 
 | 581 | 		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 582 | 		printk(KERN_DEBUG "    0x%x\n", data); | 
 | 583 | 		*tmp = data & 0xFF; | 
 | 584 | 		break; | 
 | 585 | 	case 2: | 
 | 586 | 		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 587 | 		printk(KERN_DEBUG "    0x%x\n", data); | 
 | 588 | 		*tmp = data & 0xFF; | 
 | 589 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 590 | 		break; | 
 | 591 | 	case 3: | 
 | 592 | 		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
 | 593 | 		printk(KERN_DEBUG "    0x%x\n", data); | 
 | 594 | 		*tmp = data & 0xFF; | 
 | 595 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 596 | 		*(tmp + 2) = (data >> 16) & 0xFF; | 
 | 597 | 		break; | 
 | 598 | 	default: | 
 | 599 | 		break; | 
 | 600 | 	} | 
 | 601 | } | 
 | 602 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 603 | static void fusb300_rdfifo(struct fusb300_ep *ep, | 
 | 604 | 			  struct fusb300_request *req, | 
 | 605 | 			  u32 length) | 
 | 606 | { | 
 | 607 | 	int i = 0; | 
 | 608 | 	u8 *tmp; | 
 | 609 | 	u32 data, reg; | 
 | 610 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 611 |  | 
 | 612 | 	tmp = req->req.buf + req->req.actual; | 
 | 613 | 	req->req.actual += length; | 
 | 614 |  | 
 | 615 | 	if (req->req.actual > req->req.length) | 
 | 616 | 		printk(KERN_DEBUG "req->req.actual > req->req.length\n"); | 
 | 617 |  | 
 | 618 | 	for (i = (length >> 2); i > 0; i--) { | 
 | 619 | 		data = ioread32(fusb300->reg + | 
 | 620 | 			FUSB300_OFFSET_EPPORT(ep->epnum)); | 
 | 621 | 		*tmp = data & 0xFF; | 
 | 622 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 623 | 		*(tmp + 2) = (data >> 16) & 0xFF; | 
 | 624 | 		*(tmp + 3) = (data >> 24) & 0xFF; | 
 | 625 | 		tmp = tmp + 4; | 
 | 626 | 	} | 
 | 627 |  | 
 | 628 | 	switch (length % 4) { | 
 | 629 | 	case 1: | 
 | 630 | 		data = ioread32(fusb300->reg + | 
 | 631 | 			FUSB300_OFFSET_EPPORT(ep->epnum)); | 
 | 632 | 		*tmp = data & 0xFF; | 
 | 633 | 		break; | 
 | 634 | 	case 2: | 
 | 635 | 		data = ioread32(fusb300->reg + | 
 | 636 | 			FUSB300_OFFSET_EPPORT(ep->epnum)); | 
 | 637 | 		*tmp = data & 0xFF; | 
 | 638 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 639 | 		break; | 
 | 640 | 	case 3: | 
 | 641 | 		data = ioread32(fusb300->reg + | 
 | 642 | 			FUSB300_OFFSET_EPPORT(ep->epnum)); | 
 | 643 | 		*tmp = data & 0xFF; | 
 | 644 | 		*(tmp + 1) = (data >> 8) & 0xFF; | 
 | 645 | 		*(tmp + 2) = (data >> 16) & 0xFF; | 
 | 646 | 		break; | 
 | 647 | 	default: | 
 | 648 | 		break; | 
 | 649 | 	} | 
 | 650 |  | 
 | 651 | 	do { | 
 | 652 | 		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); | 
 | 653 | 		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; | 
 | 654 | 		if (i) | 
 | 655 | 			printk(KERN_INFO "sync fifo is not empty!\n"); | 
 | 656 | 		i++; | 
 | 657 | 	} while (!reg); | 
 | 658 | } | 
 | 659 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 660 | static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep) | 
 | 661 | { | 
 | 662 | 	u8 value; | 
 | 663 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
 | 664 |  | 
 | 665 | 	value = reg & FUSB300_EPSET0_STL; | 
 | 666 |  | 
 | 667 | 	return value; | 
 | 668 | } | 
 | 669 |  | 
 | 670 | static u8 fusb300_get_cxstall(struct fusb300 *fusb300) | 
 | 671 | { | 
 | 672 | 	u8 value; | 
 | 673 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); | 
 | 674 |  | 
 | 675 | 	value = (reg & FUSB300_CSR_STL) >> 1; | 
 | 676 |  | 
 | 677 | 	return value; | 
 | 678 | } | 
 | 679 |  | 
 | 680 | static void request_error(struct fusb300 *fusb300) | 
 | 681 | { | 
 | 682 | 	fusb300_set_cxstall(fusb300); | 
 | 683 | 	printk(KERN_DEBUG "request error!!\n"); | 
 | 684 | } | 
 | 685 |  | 
 | 686 | static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
 | 687 | __releases(fusb300->lock) | 
 | 688 | __acquires(fusb300->lock) | 
 | 689 | { | 
 | 690 | 	u8 ep; | 
 | 691 | 	u16 status = 0; | 
 | 692 | 	u16 w_index = ctrl->wIndex; | 
 | 693 |  | 
 | 694 | 	switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
 | 695 | 	case USB_RECIP_DEVICE: | 
 | 696 | 		status = 1 << USB_DEVICE_SELF_POWERED; | 
 | 697 | 		break; | 
 | 698 | 	case USB_RECIP_INTERFACE: | 
 | 699 | 		status = 0; | 
 | 700 | 		break; | 
 | 701 | 	case USB_RECIP_ENDPOINT: | 
 | 702 | 		ep = w_index & USB_ENDPOINT_NUMBER_MASK; | 
 | 703 | 		if (ep) { | 
 | 704 | 			if (fusb300_get_epnstall(fusb300, ep)) | 
 | 705 | 				status = 1 << USB_ENDPOINT_HALT; | 
 | 706 | 		} else { | 
 | 707 | 			if (fusb300_get_cxstall(fusb300)) | 
 | 708 | 				status = 0; | 
 | 709 | 		} | 
 | 710 | 		break; | 
 | 711 |  | 
 | 712 | 	default: | 
 | 713 | 		request_error(fusb300); | 
 | 714 | 		return;		/* exit */ | 
 | 715 | 	} | 
 | 716 |  | 
 | 717 | 	fusb300->ep0_data = cpu_to_le16(status); | 
 | 718 | 	fusb300->ep0_req->buf = &fusb300->ep0_data; | 
 | 719 | 	fusb300->ep0_req->length = 2; | 
 | 720 |  | 
 | 721 | 	spin_unlock(&fusb300->lock); | 
 | 722 | 	fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL); | 
 | 723 | 	spin_lock(&fusb300->lock); | 
 | 724 | } | 
 | 725 |  | 
 | 726 | static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
 | 727 | { | 
 | 728 | 	u8 ep; | 
 | 729 |  | 
 | 730 | 	switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
 | 731 | 	case USB_RECIP_DEVICE: | 
 | 732 | 		fusb300_set_cxdone(fusb300); | 
 | 733 | 		break; | 
 | 734 | 	case USB_RECIP_INTERFACE: | 
 | 735 | 		fusb300_set_cxdone(fusb300); | 
 | 736 | 		break; | 
 | 737 | 	case USB_RECIP_ENDPOINT: { | 
 | 738 | 		u16 w_index = le16_to_cpu(ctrl->wIndex); | 
 | 739 |  | 
 | 740 | 		ep = w_index & USB_ENDPOINT_NUMBER_MASK; | 
 | 741 | 		if (ep) | 
 | 742 | 			fusb300_set_epnstall(fusb300, ep); | 
 | 743 | 		else | 
 | 744 | 			fusb300_set_cxstall(fusb300); | 
 | 745 | 		fusb300_set_cxdone(fusb300); | 
 | 746 | 		} | 
 | 747 | 		break; | 
 | 748 | 	default: | 
 | 749 | 		request_error(fusb300); | 
 | 750 | 		break; | 
 | 751 | 	} | 
 | 752 | } | 
 | 753 |  | 
 | 754 | static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep) | 
 | 755 | { | 
 | 756 | 	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), | 
 | 757 | 			    FUSB300_EPSET0_CLRSEQNUM); | 
 | 758 | } | 
 | 759 |  | 
 | 760 | static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
 | 761 | { | 
 | 762 | 	struct fusb300_ep *ep = | 
 | 763 | 		fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; | 
 | 764 |  | 
 | 765 | 	switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
 | 766 | 	case USB_RECIP_DEVICE: | 
 | 767 | 		fusb300_set_cxdone(fusb300); | 
 | 768 | 		break; | 
 | 769 | 	case USB_RECIP_INTERFACE: | 
 | 770 | 		fusb300_set_cxdone(fusb300); | 
 | 771 | 		break; | 
 | 772 | 	case USB_RECIP_ENDPOINT: | 
 | 773 | 		if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { | 
 | 774 | 			if (ep->wedged) { | 
 | 775 | 				fusb300_set_cxdone(fusb300); | 
 | 776 | 				break; | 
 | 777 | 			} | 
 | 778 | 			if (ep->stall) { | 
 | 779 | 				ep->stall = 0; | 
 | 780 | 				fusb300_clear_seqnum(fusb300, ep->epnum); | 
 | 781 | 				fusb300_clear_epnstall(fusb300, ep->epnum); | 
 | 782 | 				if (!list_empty(&ep->queue)) | 
 | 783 | 					enable_fifo_int(ep); | 
 | 784 | 			} | 
 | 785 | 		} | 
 | 786 | 		fusb300_set_cxdone(fusb300); | 
 | 787 | 		break; | 
 | 788 | 	default: | 
 | 789 | 		request_error(fusb300); | 
 | 790 | 		break; | 
 | 791 | 	} | 
 | 792 | } | 
 | 793 |  | 
 | 794 | static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr) | 
 | 795 | { | 
 | 796 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR); | 
 | 797 |  | 
 | 798 | 	reg &= ~FUSB300_DAR_DRVADDR_MSK; | 
 | 799 | 	reg |= FUSB300_DAR_DRVADDR(addr); | 
 | 800 |  | 
 | 801 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR); | 
 | 802 | } | 
 | 803 |  | 
 | 804 | static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
 | 805 | { | 
 | 806 | 	if (ctrl->wValue >= 0x0100) | 
 | 807 | 		request_error(fusb300); | 
 | 808 | 	else { | 
 | 809 | 		fusb300_set_dev_addr(fusb300, ctrl->wValue); | 
 | 810 | 		fusb300_set_cxdone(fusb300); | 
 | 811 | 	} | 
 | 812 | } | 
 | 813 |  | 
 | 814 | #define UVC_COPY_DESCRIPTORS(mem, src) \ | 
 | 815 | 	do { \ | 
 | 816 | 		const struct usb_descriptor_header * const *__src; \ | 
 | 817 | 		for (__src = src; *__src; ++__src) { \ | 
 | 818 | 			memcpy(mem, *__src, (*__src)->bLength); \ | 
 | 819 | 			mem += (*__src)->bLength; \ | 
 | 820 | 		} \ | 
 | 821 | 	} while (0) | 
 | 822 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 823 | static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
 | 824 | { | 
 | 825 | 	u8 *p = (u8 *)ctrl; | 
 | 826 | 	u8 ret = 0; | 
 | 827 | 	u8 i = 0; | 
 | 828 |  | 
 | 829 | 	fusb300_rdcxf(fusb300, p, 8); | 
 | 830 | 	fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN; | 
 | 831 | 	fusb300->ep0_length = ctrl->wLength; | 
 | 832 |  | 
 | 833 | 	/* check request */ | 
 | 834 | 	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { | 
 | 835 | 		switch (ctrl->bRequest) { | 
 | 836 | 		case USB_REQ_GET_STATUS: | 
 | 837 | 			get_status(fusb300, ctrl); | 
 | 838 | 			break; | 
 | 839 | 		case USB_REQ_CLEAR_FEATURE: | 
 | 840 | 			clear_feature(fusb300, ctrl); | 
 | 841 | 			break; | 
 | 842 | 		case USB_REQ_SET_FEATURE: | 
 | 843 | 			set_feature(fusb300, ctrl); | 
 | 844 | 			break; | 
 | 845 | 		case USB_REQ_SET_ADDRESS: | 
 | 846 | 			set_address(fusb300, ctrl); | 
 | 847 | 			break; | 
 | 848 | 		case USB_REQ_SET_CONFIGURATION: | 
 | 849 | 			fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR, | 
 | 850 | 					   FUSB300_DAR_SETCONFG); | 
 | 851 | 			/* clear sequence number */ | 
 | 852 | 			for (i = 1; i <= FUSB300_MAX_NUM_EP; i++) | 
 | 853 | 				fusb300_clear_seqnum(fusb300, i); | 
 | 854 | 			fusb300->reenum = 1; | 
 | 855 | 			ret = 1; | 
 | 856 | 			break; | 
 | 857 | 		default: | 
 | 858 | 			ret = 1; | 
 | 859 | 			break; | 
 | 860 | 		} | 
 | 861 | 	} else | 
 | 862 | 		ret = 1; | 
 | 863 |  | 
 | 864 | 	return ret; | 
 | 865 | } | 
 | 866 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 867 | static void done(struct fusb300_ep *ep, struct fusb300_request *req, | 
 | 868 | 		 int status) | 
 | 869 | { | 
 | 870 | 	list_del_init(&req->queue); | 
 | 871 |  | 
 | 872 | 	/* don't modify queue heads during completion callback */ | 
 | 873 | 	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) | 
 | 874 | 		req->req.status = -ESHUTDOWN; | 
 | 875 | 	else | 
 | 876 | 		req->req.status = status; | 
 | 877 |  | 
 | 878 | 	spin_unlock(&ep->fusb300->lock); | 
 | 879 | 	req->req.complete(&ep->ep, &req->req); | 
 | 880 | 	spin_lock(&ep->fusb300->lock); | 
 | 881 |  | 
 | 882 | 	if (ep->epnum) { | 
 | 883 | 		disable_fifo_int(ep); | 
 | 884 | 		if (!list_empty(&ep->queue)) | 
 | 885 | 			enable_fifo_int(ep); | 
 | 886 | 	} else | 
 | 887 | 		fusb300_set_cxdone(ep->fusb300); | 
 | 888 | } | 
 | 889 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 890 | static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d, | 
 | 891 | 		u32 len) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 892 | { | 
 | 893 | 	u32 value; | 
 | 894 | 	u32 reg; | 
 | 895 |  | 
 | 896 | 	/* wait SW owner */ | 
 | 897 | 	do { | 
 | 898 | 		reg = ioread32(ep->fusb300->reg + | 
 | 899 | 			FUSB300_OFFSET_EPPRD_W0(ep->epnum)); | 
 | 900 | 		reg &= FUSB300_EPPRD0_H; | 
 | 901 | 	} while (reg); | 
 | 902 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 903 | 	iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum)); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 904 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 905 | 	value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H | | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 906 | 		FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I; | 
 | 907 | 	iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); | 
 | 908 |  | 
 | 909 | 	iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum)); | 
 | 910 |  | 
 | 911 | 	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY, | 
 | 912 | 		FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum)); | 
 | 913 | } | 
 | 914 |  | 
 | 915 | static void fusb300_wait_idma_finished(struct fusb300_ep *ep) | 
 | 916 | { | 
 | 917 | 	u32 reg; | 
 | 918 |  | 
 | 919 | 	do { | 
 | 920 | 		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1); | 
 | 921 | 		if ((reg & FUSB300_IGR1_VBUS_CHG_INT) || | 
 | 922 | 		    (reg & FUSB300_IGR1_WARM_RST_INT) || | 
 | 923 | 		    (reg & FUSB300_IGR1_HOT_RST_INT) || | 
 | 924 | 		    (reg & FUSB300_IGR1_USBRST_INT) | 
 | 925 | 		) | 
 | 926 | 			goto IDMA_RESET; | 
 | 927 | 		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0); | 
 | 928 | 		reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum); | 
 | 929 | 	} while (!reg); | 
 | 930 |  | 
 | 931 | 	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, | 
 | 932 | 		FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); | 
 | 933 | IDMA_RESET: | 
 | 934 | 	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0, | 
 | 935 | 		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); | 
 | 936 | } | 
 | 937 |  | 
 | 938 | static void  fusb300_set_idma(struct fusb300_ep *ep, | 
 | 939 | 			struct fusb300_request *req) | 
 | 940 | { | 
 | 941 | 	dma_addr_t d; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 942 |  | 
 | 943 | 	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE); | 
 | 944 |  | 
 | 945 | 	if (dma_mapping_error(NULL, d)) { | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 946 | 		printk(KERN_DEBUG "dma_mapping_error\n"); | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 947 | 		return; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 948 | 	} | 
 | 949 |  | 
 | 950 | 	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE); | 
 | 951 |  | 
 | 952 | 	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, | 
 | 953 | 		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); | 
 | 954 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 955 | 	fusb300_fill_idma_prdtbl(ep, d, req->req.length); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 956 | 	/* check idma is done */ | 
 | 957 | 	fusb300_wait_idma_finished(ep); | 
 | 958 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 959 | 	dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 960 | } | 
 | 961 |  | 
 | 962 | static void in_ep_fifo_handler(struct fusb300_ep *ep) | 
 | 963 | { | 
 | 964 | 	struct fusb300_request *req = list_entry(ep->queue.next, | 
 | 965 | 					struct fusb300_request, queue); | 
 | 966 |  | 
| Felipe Balbi | 4dbafd3 | 2011-07-04 11:09:15 +0300 | [diff] [blame] | 967 | 	if (req->req.length) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 968 | 		fusb300_set_idma(ep, req); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 969 | 	done(ep, req, 0); | 
 | 970 | } | 
 | 971 |  | 
 | 972 | static void out_ep_fifo_handler(struct fusb300_ep *ep) | 
 | 973 | { | 
 | 974 | 	struct fusb300 *fusb300 = ep->fusb300; | 
 | 975 | 	struct fusb300_request *req = list_entry(ep->queue.next, | 
 | 976 | 						 struct fusb300_request, queue); | 
 | 977 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); | 
 | 978 | 	u32 length = reg & FUSB300_FFR_BYCNT; | 
 | 979 |  | 
 | 980 | 	fusb300_rdfifo(ep, req, length); | 
 | 981 |  | 
 | 982 | 	/* finish out transfer */ | 
 | 983 | 	if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket)) | 
 | 984 | 		done(ep, req, 0); | 
 | 985 | } | 
 | 986 |  | 
 | 987 | static void check_device_mode(struct fusb300 *fusb300) | 
 | 988 | { | 
 | 989 | 	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR); | 
 | 990 |  | 
 | 991 | 	switch (reg & FUSB300_GCR_DEVEN_MSK) { | 
 | 992 | 	case FUSB300_GCR_DEVEN_SS: | 
 | 993 | 		fusb300->gadget.speed = USB_SPEED_SUPER; | 
 | 994 | 		break; | 
 | 995 | 	case FUSB300_GCR_DEVEN_HS: | 
 | 996 | 		fusb300->gadget.speed = USB_SPEED_HIGH; | 
 | 997 | 		break; | 
 | 998 | 	case FUSB300_GCR_DEVEN_FS: | 
 | 999 | 		fusb300->gadget.speed = USB_SPEED_FULL; | 
 | 1000 | 		break; | 
 | 1001 | 	default: | 
 | 1002 | 		fusb300->gadget.speed = USB_SPEED_UNKNOWN; | 
 | 1003 | 		break; | 
 | 1004 | 	} | 
 | 1005 | 	printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); | 
 | 1006 | } | 
 | 1007 |  | 
 | 1008 |  | 
 | 1009 | static void fusb300_ep0out(struct fusb300 *fusb300) | 
 | 1010 | { | 
 | 1011 | 	struct fusb300_ep *ep = fusb300->ep[0]; | 
 | 1012 | 	u32 reg; | 
 | 1013 |  | 
 | 1014 | 	if (!list_empty(&ep->queue)) { | 
 | 1015 | 		struct fusb300_request *req; | 
 | 1016 |  | 
 | 1017 | 		req = list_first_entry(&ep->queue, | 
 | 1018 | 			struct fusb300_request, queue); | 
 | 1019 | 		if (req->req.length) | 
 | 1020 | 			fusb300_rdcxf(ep->fusb300, req->req.buf, | 
 | 1021 | 				req->req.length); | 
 | 1022 | 		done(ep, req, 0); | 
 | 1023 | 		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); | 
 | 1024 | 		reg &= ~FUSB300_IGER1_CX_OUT_INT; | 
 | 1025 | 		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1); | 
 | 1026 | 	} else | 
 | 1027 | 		pr_err("%s : empty queue\n", __func__); | 
 | 1028 | } | 
 | 1029 |  | 
 | 1030 | static void fusb300_ep0in(struct fusb300 *fusb300) | 
 | 1031 | { | 
 | 1032 | 	struct fusb300_request *req; | 
 | 1033 | 	struct fusb300_ep *ep = fusb300->ep[0]; | 
 | 1034 |  | 
 | 1035 | 	if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) { | 
 | 1036 | 		req = list_entry(ep->queue.next, | 
 | 1037 | 				struct fusb300_request, queue); | 
 | 1038 | 		if (req->req.length) | 
 | 1039 | 			fusb300_wrcxf(ep, req); | 
 | 1040 | 		if ((req->req.length - req->req.actual) < ep->ep.maxpacket) | 
 | 1041 | 			done(ep, req, 0); | 
 | 1042 | 	} else | 
 | 1043 | 		fusb300_set_cxdone(fusb300); | 
 | 1044 | } | 
 | 1045 |  | 
 | 1046 | static void fusb300_grp2_handler(void) | 
 | 1047 | { | 
 | 1048 | } | 
 | 1049 |  | 
 | 1050 | static void fusb300_grp3_handler(void) | 
 | 1051 | { | 
 | 1052 | } | 
 | 1053 |  | 
 | 1054 | static void fusb300_grp4_handler(void) | 
 | 1055 | { | 
 | 1056 | } | 
 | 1057 |  | 
 | 1058 | static void fusb300_grp5_handler(void) | 
 | 1059 | { | 
 | 1060 | } | 
 | 1061 |  | 
 | 1062 | static irqreturn_t fusb300_irq(int irq, void *_fusb300) | 
 | 1063 | { | 
 | 1064 | 	struct fusb300 *fusb300 = _fusb300; | 
 | 1065 | 	u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); | 
 | 1066 | 	u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); | 
 | 1067 | 	u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0); | 
 | 1068 | 	u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0); | 
 | 1069 | 	struct usb_ctrlrequest ctrl; | 
 | 1070 | 	u8 in; | 
 | 1071 | 	u32 reg; | 
 | 1072 | 	int i; | 
 | 1073 |  | 
 | 1074 | 	spin_lock(&fusb300->lock); | 
 | 1075 |  | 
 | 1076 | 	int_grp1 &= int_grp1_en; | 
 | 1077 | 	int_grp0 &= int_grp0_en; | 
 | 1078 |  | 
 | 1079 | 	if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) { | 
 | 1080 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1081 | 				  FUSB300_IGR1_WARM_RST_INT); | 
 | 1082 | 		printk(KERN_INFO"fusb300_warmreset\n"); | 
 | 1083 | 		fusb300_reset(); | 
 | 1084 | 	} | 
 | 1085 |  | 
 | 1086 | 	if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) { | 
 | 1087 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1088 | 				  FUSB300_IGR1_HOT_RST_INT); | 
 | 1089 | 		printk(KERN_INFO"fusb300_hotreset\n"); | 
 | 1090 | 		fusb300_reset(); | 
 | 1091 | 	} | 
 | 1092 |  | 
 | 1093 | 	if (int_grp1 & FUSB300_IGR1_USBRST_INT) { | 
 | 1094 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1095 | 				  FUSB300_IGR1_USBRST_INT); | 
 | 1096 | 		fusb300_reset(); | 
 | 1097 | 	} | 
 | 1098 | 	/* COMABT_INT has a highest priority */ | 
 | 1099 |  | 
 | 1100 | 	if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) { | 
 | 1101 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1102 | 				  FUSB300_IGR1_CX_COMABT_INT); | 
 | 1103 | 		printk(KERN_INFO"fusb300_ep0abt\n"); | 
 | 1104 | 	} | 
 | 1105 |  | 
 | 1106 | 	if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) { | 
 | 1107 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1108 | 				  FUSB300_IGR1_VBUS_CHG_INT); | 
 | 1109 | 		printk(KERN_INFO"fusb300_vbus_change\n"); | 
 | 1110 | 	} | 
 | 1111 |  | 
 | 1112 | 	if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) { | 
 | 1113 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1114 | 				  FUSB300_IGR1_U3_EXIT_FAIL_INT); | 
 | 1115 | 	} | 
 | 1116 |  | 
 | 1117 | 	if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) { | 
 | 1118 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1119 | 				  FUSB300_IGR1_U2_EXIT_FAIL_INT); | 
 | 1120 | 	} | 
 | 1121 |  | 
 | 1122 | 	if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) { | 
 | 1123 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1124 | 				  FUSB300_IGR1_U1_EXIT_FAIL_INT); | 
 | 1125 | 	} | 
 | 1126 |  | 
 | 1127 | 	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) { | 
 | 1128 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1129 | 				  FUSB300_IGR1_U2_ENTRY_FAIL_INT); | 
 | 1130 | 	} | 
 | 1131 |  | 
 | 1132 | 	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) { | 
 | 1133 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1134 | 				  FUSB300_IGR1_U1_ENTRY_FAIL_INT); | 
 | 1135 | 	} | 
 | 1136 |  | 
 | 1137 | 	if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) { | 
 | 1138 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1139 | 				  FUSB300_IGR1_U3_EXIT_INT); | 
 | 1140 | 		printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); | 
 | 1141 | 	} | 
 | 1142 |  | 
 | 1143 | 	if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) { | 
 | 1144 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1145 | 				  FUSB300_IGR1_U2_EXIT_INT); | 
 | 1146 | 		printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); | 
 | 1147 | 	} | 
 | 1148 |  | 
 | 1149 | 	if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) { | 
 | 1150 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1151 | 				  FUSB300_IGR1_U1_EXIT_INT); | 
 | 1152 | 		printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); | 
 | 1153 | 	} | 
 | 1154 |  | 
 | 1155 | 	if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) { | 
 | 1156 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1157 | 				  FUSB300_IGR1_U3_ENTRY_INT); | 
 | 1158 | 		printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); | 
 | 1159 | 		fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1, | 
 | 1160 | 				   FUSB300_SSCR1_GO_U3_DONE); | 
 | 1161 | 	} | 
 | 1162 |  | 
 | 1163 | 	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) { | 
 | 1164 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1165 | 				  FUSB300_IGR1_U2_ENTRY_INT); | 
 | 1166 | 		printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); | 
 | 1167 | 	} | 
 | 1168 |  | 
 | 1169 | 	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) { | 
 | 1170 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1171 | 				  FUSB300_IGR1_U1_ENTRY_INT); | 
 | 1172 | 		printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); | 
 | 1173 | 	} | 
 | 1174 |  | 
 | 1175 | 	if (int_grp1 & FUSB300_IGR1_RESM_INT) { | 
 | 1176 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1177 | 				  FUSB300_IGR1_RESM_INT); | 
 | 1178 | 		printk(KERN_INFO "fusb300_resume\n"); | 
 | 1179 | 	} | 
 | 1180 |  | 
 | 1181 | 	if (int_grp1 & FUSB300_IGR1_SUSP_INT) { | 
 | 1182 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1183 | 				  FUSB300_IGR1_SUSP_INT); | 
 | 1184 | 		printk(KERN_INFO "fusb300_suspend\n"); | 
 | 1185 | 	} | 
 | 1186 |  | 
 | 1187 | 	if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) { | 
 | 1188 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1189 | 				  FUSB300_IGR1_HS_LPM_INT); | 
 | 1190 | 		printk(KERN_INFO "fusb300_HS_LPM_INT\n"); | 
 | 1191 | 	} | 
 | 1192 |  | 
 | 1193 | 	if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) { | 
 | 1194 | 		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
 | 1195 | 				  FUSB300_IGR1_DEV_MODE_CHG_INT); | 
 | 1196 | 		check_device_mode(fusb300); | 
 | 1197 | 	} | 
 | 1198 |  | 
 | 1199 | 	if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) { | 
 | 1200 | 		fusb300_set_cxstall(fusb300); | 
 | 1201 | 		printk(KERN_INFO "fusb300_ep0fail\n"); | 
 | 1202 | 	} | 
 | 1203 |  | 
 | 1204 | 	if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) { | 
 | 1205 | 		printk(KERN_INFO "fusb300_ep0setup\n"); | 
 | 1206 | 		if (setup_packet(fusb300, &ctrl)) { | 
 | 1207 | 			spin_unlock(&fusb300->lock); | 
 | 1208 | 			if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0) | 
 | 1209 | 				fusb300_set_cxstall(fusb300); | 
 | 1210 | 			spin_lock(&fusb300->lock); | 
 | 1211 | 		} | 
 | 1212 | 	} | 
 | 1213 |  | 
 | 1214 | 	if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT) | 
 | 1215 | 		printk(KERN_INFO "fusb300_cmdend\n"); | 
 | 1216 |  | 
 | 1217 |  | 
 | 1218 | 	if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) { | 
 | 1219 | 		printk(KERN_INFO "fusb300_cxout\n"); | 
 | 1220 | 		fusb300_ep0out(fusb300); | 
 | 1221 | 	} | 
 | 1222 |  | 
 | 1223 | 	if (int_grp1 & FUSB300_IGR1_CX_IN_INT) { | 
 | 1224 | 		printk(KERN_INFO "fusb300_cxin\n"); | 
 | 1225 | 		fusb300_ep0in(fusb300); | 
 | 1226 | 	} | 
 | 1227 |  | 
 | 1228 | 	if (int_grp1 & FUSB300_IGR1_INTGRP5) | 
 | 1229 | 		fusb300_grp5_handler(); | 
 | 1230 |  | 
 | 1231 | 	if (int_grp1 & FUSB300_IGR1_INTGRP4) | 
 | 1232 | 		fusb300_grp4_handler(); | 
 | 1233 |  | 
 | 1234 | 	if (int_grp1 & FUSB300_IGR1_INTGRP3) | 
 | 1235 | 		fusb300_grp3_handler(); | 
 | 1236 |  | 
 | 1237 | 	if (int_grp1 & FUSB300_IGR1_INTGRP2) | 
 | 1238 | 		fusb300_grp2_handler(); | 
 | 1239 |  | 
 | 1240 | 	if (int_grp0) { | 
 | 1241 | 		for (i = 1; i < FUSB300_MAX_NUM_EP; i++) { | 
 | 1242 | 			if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) { | 
 | 1243 | 				reg = ioread32(fusb300->reg + | 
 | 1244 | 					FUSB300_OFFSET_EPSET1(i)); | 
 | 1245 | 				in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0; | 
 | 1246 | 				if (in) | 
 | 1247 | 					in_ep_fifo_handler(fusb300->ep[i]); | 
 | 1248 | 				else | 
 | 1249 | 					out_ep_fifo_handler(fusb300->ep[i]); | 
 | 1250 | 			} | 
 | 1251 | 		} | 
 | 1252 | 	} | 
 | 1253 |  | 
 | 1254 | 	spin_unlock(&fusb300->lock); | 
 | 1255 |  | 
 | 1256 | 	return IRQ_HANDLED; | 
 | 1257 | } | 
 | 1258 |  | 
 | 1259 | static void fusb300_set_u2_timeout(struct fusb300 *fusb300, | 
 | 1260 | 				   u32 time) | 
 | 1261 | { | 
 | 1262 | 	u32 reg; | 
 | 1263 |  | 
 | 1264 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); | 
 | 1265 | 	reg &= ~0xff; | 
 | 1266 | 	reg |= FUSB300_SSCR2_U2TIMEOUT(time); | 
 | 1267 |  | 
 | 1268 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); | 
 | 1269 | } | 
 | 1270 |  | 
 | 1271 | static void fusb300_set_u1_timeout(struct fusb300 *fusb300, | 
 | 1272 | 				   u32 time) | 
 | 1273 | { | 
 | 1274 | 	u32 reg; | 
 | 1275 |  | 
 | 1276 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); | 
 | 1277 | 	reg &= ~(0xff << 8); | 
 | 1278 | 	reg |= FUSB300_SSCR2_U1TIMEOUT(time); | 
 | 1279 |  | 
 | 1280 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); | 
 | 1281 | } | 
 | 1282 |  | 
 | 1283 | static void init_controller(struct fusb300 *fusb300) | 
 | 1284 | { | 
 | 1285 | 	u32 reg; | 
 | 1286 | 	u32 mask = 0; | 
 | 1287 | 	u32 val = 0; | 
 | 1288 |  | 
 | 1289 | 	/* split on */ | 
 | 1290 | 	mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON; | 
 | 1291 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR); | 
 | 1292 | 	reg &= ~mask; | 
 | 1293 | 	reg |= val; | 
 | 1294 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR); | 
 | 1295 |  | 
 | 1296 | 	/* enable high-speed LPM */ | 
 | 1297 | 	mask = val = FUSB300_HSCR_HS_LPM_PERMIT; | 
 | 1298 | 	reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR); | 
 | 1299 | 	reg &= ~mask; | 
 | 1300 | 	reg |= val; | 
 | 1301 | 	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR); | 
 | 1302 |  | 
 | 1303 | 	/*set u1 u2 timmer*/ | 
 | 1304 | 	fusb300_set_u2_timeout(fusb300, 0xff); | 
 | 1305 | 	fusb300_set_u1_timeout(fusb300, 0xff); | 
 | 1306 |  | 
 | 1307 | 	/* enable all grp1 interrupt */ | 
 | 1308 | 	iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); | 
 | 1309 | } | 
 | 1310 | /*------------------------------------------------------------------------*/ | 
 | 1311 | static struct fusb300 *the_controller; | 
 | 1312 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1313 | static int fusb300_udc_start(struct usb_gadget_driver *driver, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1314 | 		int (*bind)(struct usb_gadget *)) | 
 | 1315 | { | 
 | 1316 | 	struct fusb300 *fusb300 = the_controller; | 
 | 1317 | 	int retval; | 
 | 1318 |  | 
 | 1319 | 	if (!driver | 
| Michal Nazarewicz | 7177aed | 2011-11-19 18:27:38 +0100 | [diff] [blame] | 1320 | 			|| driver->max_speed < USB_SPEED_FULL | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1321 | 			|| !bind | 
 | 1322 | 			|| !driver->setup) | 
 | 1323 | 		return -EINVAL; | 
 | 1324 |  | 
 | 1325 | 	if (!fusb300) | 
 | 1326 | 		return -ENODEV; | 
 | 1327 |  | 
 | 1328 | 	if (fusb300->driver) | 
 | 1329 | 		return -EBUSY; | 
 | 1330 |  | 
 | 1331 | 	/* hook up the driver */ | 
 | 1332 | 	driver->driver.bus = NULL; | 
 | 1333 | 	fusb300->driver = driver; | 
 | 1334 | 	fusb300->gadget.dev.driver = &driver->driver; | 
 | 1335 |  | 
 | 1336 | 	retval = device_add(&fusb300->gadget.dev); | 
 | 1337 | 	if (retval) { | 
 | 1338 | 		pr_err("device_add error (%d)\n", retval); | 
 | 1339 | 		goto error; | 
 | 1340 | 	} | 
 | 1341 |  | 
 | 1342 | 	retval = bind(&fusb300->gadget); | 
 | 1343 | 	if (retval) { | 
 | 1344 | 		pr_err("bind to driver error (%d)\n", retval); | 
 | 1345 | 		device_del(&fusb300->gadget.dev); | 
 | 1346 | 		goto error; | 
 | 1347 | 	} | 
 | 1348 |  | 
 | 1349 | 	return 0; | 
 | 1350 |  | 
 | 1351 | error: | 
 | 1352 | 	fusb300->driver = NULL; | 
 | 1353 | 	fusb300->gadget.dev.driver = NULL; | 
 | 1354 |  | 
 | 1355 | 	return retval; | 
 | 1356 | } | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1357 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1358 | static int fusb300_udc_stop(struct usb_gadget_driver *driver) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1359 | { | 
 | 1360 | 	struct fusb300 *fusb300 = the_controller; | 
 | 1361 |  | 
 | 1362 | 	if (driver != fusb300->driver || !driver->unbind) | 
 | 1363 | 		return -EINVAL; | 
 | 1364 |  | 
 | 1365 | 	driver->unbind(&fusb300->gadget); | 
 | 1366 | 	fusb300->gadget.dev.driver = NULL; | 
 | 1367 |  | 
 | 1368 | 	init_controller(fusb300); | 
 | 1369 | 	device_del(&fusb300->gadget.dev); | 
 | 1370 | 	fusb300->driver = NULL; | 
 | 1371 |  | 
 | 1372 | 	return 0; | 
 | 1373 | } | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1374 | /*--------------------------------------------------------------------------*/ | 
 | 1375 |  | 
 | 1376 | static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) | 
 | 1377 | { | 
 | 1378 | 	return 0; | 
 | 1379 | } | 
 | 1380 |  | 
 | 1381 | static struct usb_gadget_ops fusb300_gadget_ops = { | 
 | 1382 | 	.pullup		= fusb300_udc_pullup, | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1383 | 	.start		= fusb300_udc_start, | 
 | 1384 | 	.stop		= fusb300_udc_stop, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1385 | }; | 
 | 1386 |  | 
 | 1387 | static int __exit fusb300_remove(struct platform_device *pdev) | 
 | 1388 | { | 
 | 1389 | 	struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev); | 
 | 1390 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1391 | 	usb_del_gadget_udc(&fusb300->gadget); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1392 | 	iounmap(fusb300->reg); | 
 | 1393 | 	free_irq(platform_get_irq(pdev, 0), fusb300); | 
 | 1394 |  | 
 | 1395 | 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); | 
 | 1396 | 	kfree(fusb300); | 
 | 1397 |  | 
 | 1398 | 	return 0; | 
 | 1399 | } | 
 | 1400 |  | 
 | 1401 | static int __init fusb300_probe(struct platform_device *pdev) | 
 | 1402 | { | 
 | 1403 | 	struct resource *res, *ires, *ires1; | 
 | 1404 | 	void __iomem *reg = NULL; | 
 | 1405 | 	struct fusb300 *fusb300 = NULL; | 
 | 1406 | 	struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP]; | 
 | 1407 | 	int ret = 0; | 
 | 1408 | 	int i; | 
 | 1409 |  | 
 | 1410 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 1411 | 	if (!res) { | 
 | 1412 | 		ret = -ENODEV; | 
 | 1413 | 		pr_err("platform_get_resource error.\n"); | 
 | 1414 | 		goto clean_up; | 
 | 1415 | 	} | 
 | 1416 |  | 
 | 1417 | 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
 | 1418 | 	if (!ires) { | 
 | 1419 | 		ret = -ENODEV; | 
 | 1420 | 		dev_err(&pdev->dev, | 
 | 1421 | 			"platform_get_resource IORESOURCE_IRQ error.\n"); | 
 | 1422 | 		goto clean_up; | 
 | 1423 | 	} | 
 | 1424 |  | 
 | 1425 | 	ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); | 
 | 1426 | 	if (!ires1) { | 
 | 1427 | 		ret = -ENODEV; | 
 | 1428 | 		dev_err(&pdev->dev, | 
 | 1429 | 			"platform_get_resource IORESOURCE_IRQ 1 error.\n"); | 
 | 1430 | 		goto clean_up; | 
 | 1431 | 	} | 
 | 1432 |  | 
 | 1433 | 	reg = ioremap(res->start, resource_size(res)); | 
 | 1434 | 	if (reg == NULL) { | 
 | 1435 | 		ret = -ENOMEM; | 
 | 1436 | 		pr_err("ioremap error.\n"); | 
 | 1437 | 		goto clean_up; | 
 | 1438 | 	} | 
 | 1439 |  | 
 | 1440 | 	/* initialize udc */ | 
 | 1441 | 	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); | 
 | 1442 | 	if (fusb300 == NULL) { | 
 | 1443 | 		pr_err("kzalloc error\n"); | 
 | 1444 | 		goto clean_up; | 
 | 1445 | 	} | 
 | 1446 |  | 
 | 1447 | 	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { | 
 | 1448 | 		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); | 
 | 1449 | 		if (_ep[i] == NULL) { | 
 | 1450 | 			pr_err("_ep kzalloc error\n"); | 
 | 1451 | 			goto clean_up; | 
 | 1452 | 		} | 
 | 1453 | 		fusb300->ep[i] = _ep[i]; | 
 | 1454 | 	} | 
 | 1455 |  | 
 | 1456 | 	spin_lock_init(&fusb300->lock); | 
 | 1457 |  | 
 | 1458 | 	dev_set_drvdata(&pdev->dev, fusb300); | 
 | 1459 |  | 
 | 1460 | 	fusb300->gadget.ops = &fusb300_gadget_ops; | 
 | 1461 |  | 
 | 1462 | 	device_initialize(&fusb300->gadget.dev); | 
 | 1463 |  | 
 | 1464 | 	dev_set_name(&fusb300->gadget.dev, "gadget"); | 
 | 1465 |  | 
| Michal Nazarewicz | d327ab5 | 2011-11-19 18:27:37 +0100 | [diff] [blame] | 1466 | 	fusb300->gadget.max_speed = USB_SPEED_HIGH; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1467 | 	fusb300->gadget.dev.parent = &pdev->dev; | 
 | 1468 | 	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask; | 
 | 1469 | 	fusb300->gadget.dev.release = pdev->dev.release; | 
 | 1470 | 	fusb300->gadget.name = udc_name; | 
 | 1471 | 	fusb300->reg = reg; | 
 | 1472 |  | 
| Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1473 | 	ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1474 | 			  udc_name, fusb300); | 
 | 1475 | 	if (ret < 0) { | 
 | 1476 | 		pr_err("request_irq error (%d)\n", ret); | 
 | 1477 | 		goto clean_up; | 
 | 1478 | 	} | 
 | 1479 |  | 
 | 1480 | 	ret = request_irq(ires1->start, fusb300_irq, | 
| Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1481 | 			IRQF_SHARED, udc_name, fusb300); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1482 | 	if (ret < 0) { | 
 | 1483 | 		pr_err("request_irq1 error (%d)\n", ret); | 
 | 1484 | 		goto clean_up; | 
 | 1485 | 	} | 
 | 1486 |  | 
 | 1487 | 	INIT_LIST_HEAD(&fusb300->gadget.ep_list); | 
 | 1488 |  | 
 | 1489 | 	for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) { | 
 | 1490 | 		struct fusb300_ep *ep = fusb300->ep[i]; | 
 | 1491 |  | 
 | 1492 | 		if (i != 0) { | 
 | 1493 | 			INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list); | 
 | 1494 | 			list_add_tail(&fusb300->ep[i]->ep.ep_list, | 
 | 1495 | 				     &fusb300->gadget.ep_list); | 
 | 1496 | 		} | 
 | 1497 | 		ep->fusb300 = fusb300; | 
 | 1498 | 		INIT_LIST_HEAD(&ep->queue); | 
 | 1499 | 		ep->ep.name = fusb300_ep_name[i]; | 
 | 1500 | 		ep->ep.ops = &fusb300_ep_ops; | 
 | 1501 | 		ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE; | 
 | 1502 | 	} | 
 | 1503 | 	fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE; | 
 | 1504 | 	fusb300->ep[0]->epnum = 0; | 
 | 1505 | 	fusb300->gadget.ep0 = &fusb300->ep[0]->ep; | 
 | 1506 | 	INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); | 
 | 1507 |  | 
 | 1508 | 	the_controller = fusb300; | 
 | 1509 |  | 
 | 1510 | 	fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, | 
 | 1511 | 				GFP_KERNEL); | 
 | 1512 | 	if (fusb300->ep0_req == NULL) | 
 | 1513 | 		goto clean_up3; | 
 | 1514 |  | 
 | 1515 | 	init_controller(fusb300); | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1516 | 	ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); | 
 | 1517 | 	if (ret) | 
 | 1518 | 		goto err_add_udc; | 
 | 1519 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1520 | 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); | 
 | 1521 |  | 
 | 1522 | 	return 0; | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1523 | err_add_udc: | 
 | 1524 | 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1525 |  | 
 | 1526 | clean_up3: | 
 | 1527 | 	free_irq(ires->start, fusb300); | 
 | 1528 |  | 
 | 1529 | clean_up: | 
 | 1530 | 	if (fusb300) { | 
 | 1531 | 		if (fusb300->ep0_req) | 
 | 1532 | 			fusb300_free_request(&fusb300->ep[0]->ep, | 
 | 1533 | 				fusb300->ep0_req); | 
 | 1534 | 		kfree(fusb300); | 
 | 1535 | 	} | 
 | 1536 | 	if (reg) | 
 | 1537 | 		iounmap(reg); | 
 | 1538 |  | 
 | 1539 | 	return ret; | 
 | 1540 | } | 
 | 1541 |  | 
 | 1542 | static struct platform_driver fusb300_driver = { | 
 | 1543 | 	.remove =	__exit_p(fusb300_remove), | 
 | 1544 | 	.driver		= { | 
 | 1545 | 		.name =	(char *) udc_name, | 
 | 1546 | 		.owner	= THIS_MODULE, | 
 | 1547 | 	}, | 
 | 1548 | }; | 
 | 1549 |  | 
 | 1550 | static int __init fusb300_udc_init(void) | 
 | 1551 | { | 
 | 1552 | 	return platform_driver_probe(&fusb300_driver, fusb300_probe); | 
 | 1553 | } | 
 | 1554 |  | 
 | 1555 | module_init(fusb300_udc_init); | 
 | 1556 |  | 
 | 1557 | static void __exit fusb300_udc_cleanup(void) | 
 | 1558 | { | 
 | 1559 | 	platform_driver_unregister(&fusb300_driver); | 
 | 1560 | } | 
 | 1561 | module_exit(fusb300_udc_cleanup); |