| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1 | /*************************************************************************** | 
 | 2 |  * | 
 | 3 |  * Copyright (C) 2004-2008 SMSC | 
 | 4 |  * Copyright (C) 2005-2008 ARM | 
 | 5 |  * | 
 | 6 |  * This program is free software; you can redistribute it and/or | 
 | 7 |  * modify it under the terms of the GNU General Public License | 
 | 8 |  * as published by the Free Software Foundation; either version 2 | 
 | 9 |  * of the License, or (at your option) any later version. | 
 | 10 |  * | 
 | 11 |  * This program is distributed in the hope that it will be useful, | 
 | 12 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 13 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 | 14 |  * GNU General Public License for more details. | 
 | 15 |  * | 
 | 16 |  * You should have received a copy of the GNU General Public License | 
 | 17 |  * along with this program; if not, write to the Free Software | 
 | 18 |  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 | 19 |  * | 
 | 20 |  *************************************************************************** | 
 | 21 |  * Rewritten, heavily based on smsc911x simple driver by SMSC. | 
 | 22 |  * Partly uses io macros from smc91x.c by Nicolas Pitre | 
 | 23 |  * | 
 | 24 |  * Supported devices: | 
 | 25 |  *   LAN9115, LAN9116, LAN9117, LAN9118 | 
 | 26 |  *   LAN9215, LAN9216, LAN9217, LAN9218 | 
 | 27 |  *   LAN9210, LAN9211 | 
 | 28 |  *   LAN9220, LAN9221 | 
 | 29 |  * | 
 | 30 |  */ | 
 | 31 |  | 
 | 32 | #include <linux/crc32.h> | 
 | 33 | #include <linux/delay.h> | 
 | 34 | #include <linux/errno.h> | 
 | 35 | #include <linux/etherdevice.h> | 
 | 36 | #include <linux/ethtool.h> | 
 | 37 | #include <linux/init.h> | 
 | 38 | #include <linux/ioport.h> | 
 | 39 | #include <linux/kernel.h> | 
 | 40 | #include <linux/module.h> | 
 | 41 | #include <linux/netdevice.h> | 
 | 42 | #include <linux/platform_device.h> | 
 | 43 | #include <linux/sched.h> | 
 | 44 | #include <linux/slab.h> | 
 | 45 | #include <linux/timer.h> | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 46 | #include <linux/bug.h> | 
 | 47 | #include <linux/bitops.h> | 
 | 48 | #include <linux/irq.h> | 
 | 49 | #include <linux/io.h> | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 50 | #include <linux/swab.h> | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 51 | #include <linux/phy.h> | 
 | 52 | #include <linux/smsc911x.h> | 
 | 53 | #include "smsc911x.h" | 
 | 54 |  | 
 | 55 | #define SMSC_CHIPNAME		"smsc911x" | 
 | 56 | #define SMSC_MDIONAME		"smsc911x-mdio" | 
 | 57 | #define SMSC_DRV_VERSION	"2008-10-21" | 
 | 58 |  | 
 | 59 | MODULE_LICENSE("GPL"); | 
 | 60 | MODULE_VERSION(SMSC_DRV_VERSION); | 
 | 61 |  | 
 | 62 | #if USE_DEBUG > 0 | 
 | 63 | static int debug = 16; | 
 | 64 | #else | 
 | 65 | static int debug = 3; | 
 | 66 | #endif | 
 | 67 |  | 
 | 68 | module_param(debug, int, 0); | 
 | 69 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | 
 | 70 |  | 
 | 71 | struct smsc911x_data { | 
 | 72 | 	void __iomem *ioaddr; | 
 | 73 |  | 
 | 74 | 	unsigned int idrev; | 
 | 75 |  | 
 | 76 | 	/* used to decide which workarounds apply */ | 
 | 77 | 	unsigned int generation; | 
 | 78 |  | 
 | 79 | 	/* device configuration (copied from platform_data during probe) */ | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 80 | 	struct smsc911x_platform_config config; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 81 |  | 
 | 82 | 	/* This needs to be acquired before calling any of below: | 
 | 83 | 	 * smsc911x_mac_read(), smsc911x_mac_write() | 
 | 84 | 	 */ | 
 | 85 | 	spinlock_t mac_lock; | 
 | 86 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 87 | 	/* spinlock to ensure 16-bit accesses are serialised. | 
 | 88 | 	 * unused with a 32-bit bus */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 89 | 	spinlock_t dev_lock; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 90 |  | 
 | 91 | 	struct phy_device *phy_dev; | 
 | 92 | 	struct mii_bus *mii_bus; | 
 | 93 | 	int phy_irq[PHY_MAX_ADDR]; | 
 | 94 | 	unsigned int using_extphy; | 
 | 95 | 	int last_duplex; | 
 | 96 | 	int last_carrier; | 
 | 97 |  | 
 | 98 | 	u32 msg_enable; | 
 | 99 | 	unsigned int gpio_setting; | 
 | 100 | 	unsigned int gpio_orig_setting; | 
 | 101 | 	struct net_device *dev; | 
 | 102 | 	struct napi_struct napi; | 
 | 103 |  | 
 | 104 | 	unsigned int software_irq_signal; | 
 | 105 |  | 
 | 106 | #ifdef USE_PHY_WORK_AROUND | 
 | 107 | #define MIN_PACKET_SIZE (64) | 
 | 108 | 	char loopback_tx_pkt[MIN_PACKET_SIZE]; | 
 | 109 | 	char loopback_rx_pkt[MIN_PACKET_SIZE]; | 
 | 110 | 	unsigned int resetcount; | 
 | 111 | #endif | 
 | 112 |  | 
 | 113 | 	/* Members for Multicast filter workaround */ | 
 | 114 | 	unsigned int multicast_update_pending; | 
 | 115 | 	unsigned int set_bits_mask; | 
 | 116 | 	unsigned int clear_bits_mask; | 
 | 117 | 	unsigned int hashhi; | 
 | 118 | 	unsigned int hashlo; | 
 | 119 | }; | 
 | 120 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 121 | /* The 16-bit access functions are significantly slower, due to the locking | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 122 |  * necessary.  If your bus hardware can be configured to do this for you | 
 | 123 |  * (in response to a single 32-bit operation from software), you should use | 
 | 124 |  * the 32-bit access functions instead. */ | 
 | 125 |  | 
 | 126 | static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) | 
 | 127 | { | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 128 | 	if (pdata->config.flags & SMSC911X_USE_32BIT) | 
 | 129 | 		return readl(pdata->ioaddr + reg); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 130 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 131 | 	if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
 | 132 | 		u32 data; | 
 | 133 | 		unsigned long flags; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 134 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 135 | 		/* these two 16-bit reads must be performed consecutively, so | 
 | 136 | 		 * must not be interrupted by our own ISR (which would start | 
 | 137 | 		 * another read operation) */ | 
 | 138 | 		spin_lock_irqsave(&pdata->dev_lock, flags); | 
 | 139 | 		data = ((readw(pdata->ioaddr + reg) & 0xFFFF) | | 
 | 140 | 			((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); | 
 | 141 | 		spin_unlock_irqrestore(&pdata->dev_lock, flags); | 
 | 142 |  | 
 | 143 | 		return data; | 
 | 144 | 	} | 
 | 145 |  | 
 | 146 | 	BUG(); | 
| Steve Glendinning | 702403a | 2009-01-11 00:14:27 -0800 | [diff] [blame] | 147 | 	return 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 148 | } | 
 | 149 |  | 
 | 150 | static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, | 
 | 151 | 				      u32 val) | 
 | 152 | { | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 153 | 	if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
 | 154 | 		writel(val, pdata->ioaddr + reg); | 
 | 155 | 		return; | 
 | 156 | 	} | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 157 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 158 | 	if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
 | 159 | 		unsigned long flags; | 
 | 160 |  | 
 | 161 | 		/* these two 16-bit writes must be performed consecutively, so | 
 | 162 | 		 * must not be interrupted by our own ISR (which would start | 
 | 163 | 		 * another read operation) */ | 
 | 164 | 		spin_lock_irqsave(&pdata->dev_lock, flags); | 
 | 165 | 		writew(val & 0xFFFF, pdata->ioaddr + reg); | 
 | 166 | 		writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); | 
 | 167 | 		spin_unlock_irqrestore(&pdata->dev_lock, flags); | 
 | 168 | 		return; | 
 | 169 | 	} | 
 | 170 |  | 
 | 171 | 	BUG(); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 172 | } | 
 | 173 |  | 
 | 174 | /* Writes a packet to the TX_DATA_FIFO */ | 
 | 175 | static inline void | 
 | 176 | smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, | 
 | 177 | 		      unsigned int wordcount) | 
 | 178 | { | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 179 | 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) { | 
 | 180 | 		while (wordcount--) | 
 | 181 | 			smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++)); | 
 | 182 | 		return; | 
 | 183 | 	} | 
 | 184 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 185 | 	if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
 | 186 | 		writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); | 
 | 187 | 		return; | 
 | 188 | 	} | 
 | 189 |  | 
 | 190 | 	if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
 | 191 | 		while (wordcount--) | 
 | 192 | 			smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); | 
 | 193 | 		return; | 
 | 194 | 	} | 
 | 195 |  | 
 | 196 | 	BUG(); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 197 | } | 
 | 198 |  | 
 | 199 | /* Reads a packet out of the RX_DATA_FIFO */ | 
 | 200 | static inline void | 
 | 201 | smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, | 
 | 202 | 		     unsigned int wordcount) | 
 | 203 | { | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 204 | 	if (pdata->config.flags & SMSC911X_SWAP_FIFO) { | 
 | 205 | 		while (wordcount--) | 
 | 206 | 			*buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO)); | 
 | 207 | 		return; | 
 | 208 | 	} | 
 | 209 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 210 | 	if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
 | 211 | 		readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); | 
 | 212 | 		return; | 
 | 213 | 	} | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 214 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 215 | 	if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
 | 216 | 		while (wordcount--) | 
 | 217 | 			*buf++ = smsc911x_reg_read(pdata, RX_DATA_FIFO); | 
 | 218 | 		return; | 
 | 219 | 	} | 
 | 220 |  | 
 | 221 | 	BUG(); | 
 | 222 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 223 |  | 
 | 224 | /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read | 
 | 225 |  * and smsc911x_mac_write, so assumes mac_lock is held */ | 
 | 226 | static int smsc911x_mac_complete(struct smsc911x_data *pdata) | 
 | 227 | { | 
 | 228 | 	int i; | 
 | 229 | 	u32 val; | 
 | 230 |  | 
 | 231 | 	SMSC_ASSERT_MAC_LOCK(pdata); | 
 | 232 |  | 
 | 233 | 	for (i = 0; i < 40; i++) { | 
 | 234 | 		val = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
 | 235 | 		if (!(val & MAC_CSR_CMD_CSR_BUSY_)) | 
 | 236 | 			return 0; | 
 | 237 | 	} | 
 | 238 | 	SMSC_WARNING(HW, "Timed out waiting for MAC not BUSY. " | 
 | 239 | 		"MAC_CSR_CMD: 0x%08X", val); | 
 | 240 | 	return -EIO; | 
 | 241 | } | 
 | 242 |  | 
 | 243 | /* Fetches a MAC register value. Assumes mac_lock is acquired */ | 
 | 244 | static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) | 
 | 245 | { | 
 | 246 | 	unsigned int temp; | 
 | 247 |  | 
 | 248 | 	SMSC_ASSERT_MAC_LOCK(pdata); | 
 | 249 |  | 
 | 250 | 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
 | 251 | 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { | 
 | 252 | 		SMSC_WARNING(HW, "MAC busy at entry"); | 
 | 253 | 		return 0xFFFFFFFF; | 
 | 254 | 	} | 
 | 255 |  | 
 | 256 | 	/* Send the MAC cmd */ | 
 | 257 | 	smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | | 
 | 258 | 		MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); | 
 | 259 |  | 
 | 260 | 	/* Workaround for hardware read-after-write restriction */ | 
 | 261 | 	temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 262 |  | 
 | 263 | 	/* Wait for the read to complete */ | 
 | 264 | 	if (likely(smsc911x_mac_complete(pdata) == 0)) | 
 | 265 | 		return smsc911x_reg_read(pdata, MAC_CSR_DATA); | 
 | 266 |  | 
 | 267 | 	SMSC_WARNING(HW, "MAC busy after read"); | 
 | 268 | 	return 0xFFFFFFFF; | 
 | 269 | } | 
 | 270 |  | 
 | 271 | /* Set a mac register, mac_lock must be acquired before calling */ | 
 | 272 | static void smsc911x_mac_write(struct smsc911x_data *pdata, | 
 | 273 | 			       unsigned int offset, u32 val) | 
 | 274 | { | 
 | 275 | 	unsigned int temp; | 
 | 276 |  | 
 | 277 | 	SMSC_ASSERT_MAC_LOCK(pdata); | 
 | 278 |  | 
 | 279 | 	temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
 | 280 | 	if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { | 
 | 281 | 		SMSC_WARNING(HW, | 
 | 282 | 			"smsc911x_mac_write failed, MAC busy at entry"); | 
 | 283 | 		return; | 
 | 284 | 	} | 
 | 285 |  | 
 | 286 | 	/* Send data to write */ | 
 | 287 | 	smsc911x_reg_write(pdata, MAC_CSR_DATA, val); | 
 | 288 |  | 
 | 289 | 	/* Write the actual data */ | 
 | 290 | 	smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | | 
 | 291 | 		MAC_CSR_CMD_CSR_BUSY_)); | 
 | 292 |  | 
 | 293 | 	/* Workaround for hardware read-after-write restriction */ | 
 | 294 | 	temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 295 |  | 
 | 296 | 	/* Wait for the write to complete */ | 
 | 297 | 	if (likely(smsc911x_mac_complete(pdata) == 0)) | 
 | 298 | 		return; | 
 | 299 |  | 
 | 300 | 	SMSC_WARNING(HW, | 
 | 301 | 		"smsc911x_mac_write failed, MAC busy after write"); | 
 | 302 | } | 
 | 303 |  | 
 | 304 | /* Get a phy register */ | 
 | 305 | static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) | 
 | 306 | { | 
 | 307 | 	struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; | 
 | 308 | 	unsigned long flags; | 
 | 309 | 	unsigned int addr; | 
 | 310 | 	int i, reg; | 
 | 311 |  | 
 | 312 | 	spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 313 |  | 
 | 314 | 	/* Confirm MII not busy */ | 
 | 315 | 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
 | 316 | 		SMSC_WARNING(HW, | 
 | 317 | 			"MII is busy in smsc911x_mii_read???"); | 
 | 318 | 		reg = -EIO; | 
 | 319 | 		goto out; | 
 | 320 | 	} | 
 | 321 |  | 
 | 322 | 	/* Set the address, index & direction (read from PHY) */ | 
 | 323 | 	addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); | 
 | 324 | 	smsc911x_mac_write(pdata, MII_ACC, addr); | 
 | 325 |  | 
 | 326 | 	/* Wait for read to complete w/ timeout */ | 
 | 327 | 	for (i = 0; i < 100; i++) | 
 | 328 | 		if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
 | 329 | 			reg = smsc911x_mac_read(pdata, MII_DATA); | 
 | 330 | 			goto out; | 
 | 331 | 		} | 
 | 332 |  | 
| Steve Glendinning | 150899d | 2009-04-08 15:42:15 -0700 | [diff] [blame] | 333 | 	SMSC_WARNING(HW, "Timed out waiting for MII read to finish"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 334 | 	reg = -EIO; | 
 | 335 |  | 
 | 336 | out: | 
 | 337 | 	spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 338 | 	return reg; | 
 | 339 | } | 
 | 340 |  | 
 | 341 | /* Set a phy register */ | 
 | 342 | static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, | 
 | 343 | 			   u16 val) | 
 | 344 | { | 
 | 345 | 	struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; | 
 | 346 | 	unsigned long flags; | 
 | 347 | 	unsigned int addr; | 
 | 348 | 	int i, reg; | 
 | 349 |  | 
 | 350 | 	spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 351 |  | 
 | 352 | 	/* Confirm MII not busy */ | 
 | 353 | 	if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
 | 354 | 		SMSC_WARNING(HW, | 
 | 355 | 			"MII is busy in smsc911x_mii_write???"); | 
 | 356 | 		reg = -EIO; | 
 | 357 | 		goto out; | 
 | 358 | 	} | 
 | 359 |  | 
 | 360 | 	/* Put the data to write in the MAC */ | 
 | 361 | 	smsc911x_mac_write(pdata, MII_DATA, val); | 
 | 362 |  | 
 | 363 | 	/* Set the address, index & direction (write to PHY) */ | 
 | 364 | 	addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | | 
 | 365 | 		MII_ACC_MII_WRITE_; | 
 | 366 | 	smsc911x_mac_write(pdata, MII_ACC, addr); | 
 | 367 |  | 
 | 368 | 	/* Wait for write to complete w/ timeout */ | 
 | 369 | 	for (i = 0; i < 100; i++) | 
 | 370 | 		if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
 | 371 | 			reg = 0; | 
 | 372 | 			goto out; | 
 | 373 | 		} | 
 | 374 |  | 
 | 375 | 	SMSC_WARNING(HW, "Timed out waiting for MII write to finish"); | 
 | 376 | 	reg = -EIO; | 
 | 377 |  | 
 | 378 | out: | 
 | 379 | 	spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 380 | 	return reg; | 
 | 381 | } | 
 | 382 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 383 | /* Switch to external phy. Assumes tx and rx are stopped. */ | 
 | 384 | static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 385 | { | 
 | 386 | 	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); | 
 | 387 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 388 | 	/* Disable phy clocks to the MAC */ | 
 | 389 | 	hwcfg &= (~HW_CFG_PHY_CLK_SEL_); | 
 | 390 | 	hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; | 
 | 391 | 	smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
 | 392 | 	udelay(10);	/* Enough time for clocks to stop */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 393 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 394 | 	/* Switch to external phy */ | 
 | 395 | 	hwcfg |= HW_CFG_EXT_PHY_EN_; | 
 | 396 | 	smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 397 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 398 | 	/* Enable phy clocks to the MAC */ | 
 | 399 | 	hwcfg &= (~HW_CFG_PHY_CLK_SEL_); | 
 | 400 | 	hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; | 
 | 401 | 	smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
 | 402 | 	udelay(10);	/* Enough time for clocks to restart */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 403 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 404 | 	hwcfg |= HW_CFG_SMI_SEL_; | 
 | 405 | 	smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
 | 406 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 407 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 408 | /* Autodetects and enables external phy if present on supported chips. | 
 | 409 |  * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY | 
 | 410 |  * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ | 
 | 411 | static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) | 
 | 412 | { | 
 | 413 | 	unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 414 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 415 | 	if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { | 
 | 416 | 		SMSC_TRACE(HW, "Forcing internal PHY"); | 
 | 417 | 		pdata->using_extphy = 0; | 
 | 418 | 	} else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { | 
 | 419 | 		SMSC_TRACE(HW, "Forcing external PHY"); | 
 | 420 | 		smsc911x_phy_enable_external(pdata); | 
 | 421 | 		pdata->using_extphy = 1; | 
 | 422 | 	} else if (hwcfg & HW_CFG_EXT_PHY_DET_) { | 
 | 423 | 		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY"); | 
 | 424 | 		smsc911x_phy_enable_external(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 425 | 		pdata->using_extphy = 1; | 
 | 426 | 	} else { | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 427 | 		SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY"); | 
 | 428 | 		pdata->using_extphy = 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 429 | 	} | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 430 | } | 
 | 431 |  | 
 | 432 | /* Fetches a tx status out of the status fifo */ | 
 | 433 | static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) | 
 | 434 | { | 
 | 435 | 	unsigned int result = | 
 | 436 | 	    smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; | 
 | 437 |  | 
 | 438 | 	if (result != 0) | 
 | 439 | 		result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); | 
 | 440 |  | 
 | 441 | 	return result; | 
 | 442 | } | 
 | 443 |  | 
 | 444 | /* Fetches the next rx status */ | 
 | 445 | static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) | 
 | 446 | { | 
 | 447 | 	unsigned int result = | 
 | 448 | 	    smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; | 
 | 449 |  | 
 | 450 | 	if (result != 0) | 
 | 451 | 		result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); | 
 | 452 |  | 
 | 453 | 	return result; | 
 | 454 | } | 
 | 455 |  | 
 | 456 | #ifdef USE_PHY_WORK_AROUND | 
 | 457 | static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) | 
 | 458 | { | 
 | 459 | 	unsigned int tries; | 
 | 460 | 	u32 wrsz; | 
 | 461 | 	u32 rdsz; | 
 | 462 | 	ulong bufp; | 
 | 463 |  | 
 | 464 | 	for (tries = 0; tries < 10; tries++) { | 
 | 465 | 		unsigned int txcmd_a; | 
 | 466 | 		unsigned int txcmd_b; | 
 | 467 | 		unsigned int status; | 
 | 468 | 		unsigned int pktlength; | 
 | 469 | 		unsigned int i; | 
 | 470 |  | 
 | 471 | 		/* Zero-out rx packet memory */ | 
 | 472 | 		memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); | 
 | 473 |  | 
 | 474 | 		/* Write tx packet to 118 */ | 
 | 475 | 		txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; | 
 | 476 | 		txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; | 
 | 477 | 		txcmd_a |= MIN_PACKET_SIZE; | 
 | 478 |  | 
 | 479 | 		txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; | 
 | 480 |  | 
 | 481 | 		smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); | 
 | 482 | 		smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); | 
 | 483 |  | 
 | 484 | 		bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); | 
 | 485 | 		wrsz = MIN_PACKET_SIZE + 3; | 
 | 486 | 		wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); | 
 | 487 | 		wrsz >>= 2; | 
 | 488 |  | 
 | 489 | 		smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); | 
 | 490 |  | 
 | 491 | 		/* Wait till transmit is done */ | 
 | 492 | 		i = 60; | 
 | 493 | 		do { | 
 | 494 | 			udelay(5); | 
 | 495 | 			status = smsc911x_tx_get_txstatus(pdata); | 
 | 496 | 		} while ((i--) && (!status)); | 
 | 497 |  | 
 | 498 | 		if (!status) { | 
 | 499 | 			SMSC_WARNING(HW, "Failed to transmit " | 
 | 500 | 				"during loopback test"); | 
 | 501 | 			continue; | 
 | 502 | 		} | 
 | 503 | 		if (status & TX_STS_ES_) { | 
 | 504 | 			SMSC_WARNING(HW, "Transmit encountered " | 
 | 505 | 				"errors during loopback test"); | 
 | 506 | 			continue; | 
 | 507 | 		} | 
 | 508 |  | 
 | 509 | 		/* Wait till receive is done */ | 
 | 510 | 		i = 60; | 
 | 511 | 		do { | 
 | 512 | 			udelay(5); | 
 | 513 | 			status = smsc911x_rx_get_rxstatus(pdata); | 
 | 514 | 		} while ((i--) && (!status)); | 
 | 515 |  | 
 | 516 | 		if (!status) { | 
 | 517 | 			SMSC_WARNING(HW, | 
 | 518 | 				"Failed to receive during loopback test"); | 
 | 519 | 			continue; | 
 | 520 | 		} | 
 | 521 | 		if (status & RX_STS_ES_) { | 
 | 522 | 			SMSC_WARNING(HW, "Receive encountered " | 
 | 523 | 				"errors during loopback test"); | 
 | 524 | 			continue; | 
 | 525 | 		} | 
 | 526 |  | 
 | 527 | 		pktlength = ((status & 0x3FFF0000UL) >> 16); | 
 | 528 | 		bufp = (ulong)pdata->loopback_rx_pkt; | 
 | 529 | 		rdsz = pktlength + 3; | 
 | 530 | 		rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); | 
 | 531 | 		rdsz >>= 2; | 
 | 532 |  | 
 | 533 | 		smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz); | 
 | 534 |  | 
 | 535 | 		if (pktlength != (MIN_PACKET_SIZE + 4)) { | 
 | 536 | 			SMSC_WARNING(HW, "Unexpected packet size " | 
 | 537 | 				"during loop back test, size=%d, will retry", | 
 | 538 | 				pktlength); | 
 | 539 | 		} else { | 
 | 540 | 			unsigned int j; | 
 | 541 | 			int mismatch = 0; | 
 | 542 | 			for (j = 0; j < MIN_PACKET_SIZE; j++) { | 
 | 543 | 				if (pdata->loopback_tx_pkt[j] | 
 | 544 | 				    != pdata->loopback_rx_pkt[j]) { | 
 | 545 | 					mismatch = 1; | 
 | 546 | 					break; | 
 | 547 | 				} | 
 | 548 | 			} | 
 | 549 | 			if (!mismatch) { | 
 | 550 | 				SMSC_TRACE(HW, "Successfully verified " | 
 | 551 | 					   "loopback packet"); | 
 | 552 | 				return 0; | 
 | 553 | 			} else { | 
 | 554 | 				SMSC_WARNING(HW, "Data mismatch " | 
 | 555 | 					"during loop back test, will retry"); | 
 | 556 | 			} | 
 | 557 | 		} | 
 | 558 | 	} | 
 | 559 |  | 
 | 560 | 	return -EIO; | 
 | 561 | } | 
 | 562 |  | 
 | 563 | static int smsc911x_phy_reset(struct smsc911x_data *pdata) | 
 | 564 | { | 
 | 565 | 	struct phy_device *phy_dev = pdata->phy_dev; | 
 | 566 | 	unsigned int temp; | 
 | 567 | 	unsigned int i = 100000; | 
 | 568 |  | 
 | 569 | 	BUG_ON(!phy_dev); | 
 | 570 | 	BUG_ON(!phy_dev->bus); | 
 | 571 |  | 
 | 572 | 	SMSC_TRACE(HW, "Performing PHY BCR Reset"); | 
 | 573 | 	smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); | 
 | 574 | 	do { | 
 | 575 | 		msleep(1); | 
 | 576 | 		temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, | 
 | 577 | 			MII_BMCR); | 
 | 578 | 	} while ((i--) && (temp & BMCR_RESET)); | 
 | 579 |  | 
 | 580 | 	if (temp & BMCR_RESET) { | 
 | 581 | 		SMSC_WARNING(HW, "PHY reset failed to complete."); | 
 | 582 | 		return -EIO; | 
 | 583 | 	} | 
 | 584 | 	/* Extra delay required because the phy may not be completed with | 
 | 585 | 	* its reset when BMCR_RESET is cleared. Specs say 256 uS is | 
 | 586 | 	* enough delay but using 1ms here to be safe */ | 
 | 587 | 	msleep(1); | 
 | 588 |  | 
 | 589 | 	return 0; | 
 | 590 | } | 
 | 591 |  | 
 | 592 | static int smsc911x_phy_loopbacktest(struct net_device *dev) | 
 | 593 | { | 
 | 594 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 595 | 	struct phy_device *phy_dev = pdata->phy_dev; | 
 | 596 | 	int result = -EIO; | 
 | 597 | 	unsigned int i, val; | 
 | 598 | 	unsigned long flags; | 
 | 599 |  | 
 | 600 | 	/* Initialise tx packet using broadcast destination address */ | 
 | 601 | 	memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); | 
 | 602 |  | 
 | 603 | 	/* Use incrementing source address */ | 
 | 604 | 	for (i = 6; i < 12; i++) | 
 | 605 | 		pdata->loopback_tx_pkt[i] = (char)i; | 
 | 606 |  | 
 | 607 | 	/* Set length type field */ | 
 | 608 | 	pdata->loopback_tx_pkt[12] = 0x00; | 
 | 609 | 	pdata->loopback_tx_pkt[13] = 0x00; | 
 | 610 |  | 
 | 611 | 	for (i = 14; i < MIN_PACKET_SIZE; i++) | 
 | 612 | 		pdata->loopback_tx_pkt[i] = (char)i; | 
 | 613 |  | 
 | 614 | 	val = smsc911x_reg_read(pdata, HW_CFG); | 
 | 615 | 	val &= HW_CFG_TX_FIF_SZ_; | 
 | 616 | 	val |= HW_CFG_SF_; | 
 | 617 | 	smsc911x_reg_write(pdata, HW_CFG, val); | 
 | 618 |  | 
 | 619 | 	smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); | 
 | 620 | 	smsc911x_reg_write(pdata, RX_CFG, | 
 | 621 | 		(u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); | 
 | 622 |  | 
 | 623 | 	for (i = 0; i < 10; i++) { | 
 | 624 | 		/* Set PHY to 10/FD, no ANEG, and loopback mode */ | 
 | 625 | 		smsc911x_mii_write(phy_dev->bus, phy_dev->addr,	MII_BMCR, | 
 | 626 | 			BMCR_LOOPBACK | BMCR_FULLDPLX); | 
 | 627 |  | 
 | 628 | 		/* Enable MAC tx/rx, FD */ | 
 | 629 | 		spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 630 | 		smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ | 
 | 631 | 				   | MAC_CR_TXEN_ | MAC_CR_RXEN_); | 
 | 632 | 		spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 633 |  | 
 | 634 | 		if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { | 
 | 635 | 			result = 0; | 
 | 636 | 			break; | 
 | 637 | 		} | 
 | 638 | 		pdata->resetcount++; | 
 | 639 |  | 
 | 640 | 		/* Disable MAC rx */ | 
 | 641 | 		spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 642 | 		smsc911x_mac_write(pdata, MAC_CR, 0); | 
 | 643 | 		spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 644 |  | 
 | 645 | 		smsc911x_phy_reset(pdata); | 
 | 646 | 	} | 
 | 647 |  | 
 | 648 | 	/* Disable MAC */ | 
 | 649 | 	spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 650 | 	smsc911x_mac_write(pdata, MAC_CR, 0); | 
 | 651 | 	spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 652 |  | 
 | 653 | 	/* Cancel PHY loopback mode */ | 
 | 654 | 	smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); | 
 | 655 |  | 
 | 656 | 	smsc911x_reg_write(pdata, TX_CFG, 0); | 
 | 657 | 	smsc911x_reg_write(pdata, RX_CFG, 0); | 
 | 658 |  | 
 | 659 | 	return result; | 
 | 660 | } | 
 | 661 | #endif				/* USE_PHY_WORK_AROUND */ | 
 | 662 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 663 | static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) | 
 | 664 | { | 
 | 665 | 	struct phy_device *phy_dev = pdata->phy_dev; | 
 | 666 | 	u32 afc = smsc911x_reg_read(pdata, AFC_CFG); | 
 | 667 | 	u32 flow; | 
 | 668 | 	unsigned long flags; | 
 | 669 |  | 
 | 670 | 	if (phy_dev->duplex == DUPLEX_FULL) { | 
 | 671 | 		u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); | 
 | 672 | 		u16 rmtadv = phy_read(phy_dev, MII_LPA); | 
| Steve Glendinning | bc02ff9 | 2008-12-16 02:00:48 -0800 | [diff] [blame] | 673 | 		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 674 |  | 
 | 675 | 		if (cap & FLOW_CTRL_RX) | 
 | 676 | 			flow = 0xFFFF0002; | 
 | 677 | 		else | 
 | 678 | 			flow = 0; | 
 | 679 |  | 
 | 680 | 		if (cap & FLOW_CTRL_TX) | 
 | 681 | 			afc |= 0xF; | 
 | 682 | 		else | 
 | 683 | 			afc &= ~0xF; | 
 | 684 |  | 
 | 685 | 		SMSC_TRACE(HW, "rx pause %s, tx pause %s", | 
 | 686 | 			(cap & FLOW_CTRL_RX ? "enabled" : "disabled"), | 
 | 687 | 			(cap & FLOW_CTRL_TX ? "enabled" : "disabled")); | 
 | 688 | 	} else { | 
 | 689 | 		SMSC_TRACE(HW, "half duplex"); | 
 | 690 | 		flow = 0; | 
 | 691 | 		afc |= 0xF; | 
 | 692 | 	} | 
 | 693 |  | 
 | 694 | 	spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 695 | 	smsc911x_mac_write(pdata, FLOW, flow); | 
 | 696 | 	spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 697 |  | 
 | 698 | 	smsc911x_reg_write(pdata, AFC_CFG, afc); | 
 | 699 | } | 
 | 700 |  | 
 | 701 | /* Update link mode if anything has changed.  Called periodically when the | 
 | 702 |  * PHY is in polling mode, even if nothing has changed. */ | 
 | 703 | static void smsc911x_phy_adjust_link(struct net_device *dev) | 
 | 704 | { | 
 | 705 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 706 | 	struct phy_device *phy_dev = pdata->phy_dev; | 
 | 707 | 	unsigned long flags; | 
 | 708 | 	int carrier; | 
 | 709 |  | 
 | 710 | 	if (phy_dev->duplex != pdata->last_duplex) { | 
 | 711 | 		unsigned int mac_cr; | 
 | 712 | 		SMSC_TRACE(HW, "duplex state has changed"); | 
 | 713 |  | 
 | 714 | 		spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 715 | 		mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
 | 716 | 		if (phy_dev->duplex) { | 
 | 717 | 			SMSC_TRACE(HW, | 
 | 718 | 				"configuring for full duplex mode"); | 
 | 719 | 			mac_cr |= MAC_CR_FDPX_; | 
 | 720 | 		} else { | 
 | 721 | 			SMSC_TRACE(HW, | 
 | 722 | 				"configuring for half duplex mode"); | 
 | 723 | 			mac_cr &= ~MAC_CR_FDPX_; | 
 | 724 | 		} | 
 | 725 | 		smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
 | 726 | 		spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 727 |  | 
 | 728 | 		smsc911x_phy_update_flowcontrol(pdata); | 
 | 729 | 		pdata->last_duplex = phy_dev->duplex; | 
 | 730 | 	} | 
 | 731 |  | 
 | 732 | 	carrier = netif_carrier_ok(dev); | 
 | 733 | 	if (carrier != pdata->last_carrier) { | 
 | 734 | 		SMSC_TRACE(HW, "carrier state has changed"); | 
 | 735 | 		if (carrier) { | 
 | 736 | 			SMSC_TRACE(HW, "configuring for carrier OK"); | 
 | 737 | 			if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && | 
 | 738 | 			    (!pdata->using_extphy)) { | 
 | 739 | 				/* Restore orginal GPIO configuration */ | 
 | 740 | 				pdata->gpio_setting = pdata->gpio_orig_setting; | 
 | 741 | 				smsc911x_reg_write(pdata, GPIO_CFG, | 
 | 742 | 					pdata->gpio_setting); | 
 | 743 | 			} | 
 | 744 | 		} else { | 
 | 745 | 			SMSC_TRACE(HW, "configuring for no carrier"); | 
 | 746 | 			/* Check global setting that LED1 | 
 | 747 | 			 * usage is 10/100 indicator */ | 
 | 748 | 			pdata->gpio_setting = smsc911x_reg_read(pdata, | 
 | 749 | 				GPIO_CFG); | 
 | 750 | 			if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) | 
 | 751 | 			    && (!pdata->using_extphy)) { | 
 | 752 | 				/* Force 10/100 LED off, after saving | 
 | 753 | 				 * orginal GPIO configuration */ | 
 | 754 | 				pdata->gpio_orig_setting = pdata->gpio_setting; | 
 | 755 |  | 
 | 756 | 				pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; | 
 | 757 | 				pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ | 
 | 758 | 							| GPIO_CFG_GPIODIR0_ | 
 | 759 | 							| GPIO_CFG_GPIOD0_); | 
 | 760 | 				smsc911x_reg_write(pdata, GPIO_CFG, | 
 | 761 | 					pdata->gpio_setting); | 
 | 762 | 			} | 
 | 763 | 		} | 
 | 764 | 		pdata->last_carrier = carrier; | 
 | 765 | 	} | 
 | 766 | } | 
 | 767 |  | 
 | 768 | static int smsc911x_mii_probe(struct net_device *dev) | 
 | 769 | { | 
 | 770 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 771 | 	struct phy_device *phydev = NULL; | 
 | 772 | 	int phy_addr; | 
 | 773 |  | 
 | 774 | 	/* find the first phy */ | 
 | 775 | 	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { | 
 | 776 | 		if (pdata->mii_bus->phy_map[phy_addr]) { | 
 | 777 | 			phydev = pdata->mii_bus->phy_map[phy_addr]; | 
 | 778 | 			SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X", | 
 | 779 | 				phy_addr, phydev->addr, phydev->phy_id); | 
 | 780 | 			break; | 
 | 781 | 		} | 
 | 782 | 	} | 
 | 783 |  | 
 | 784 | 	if (!phydev) { | 
 | 785 | 		pr_err("%s: no PHY found\n", dev->name); | 
 | 786 | 		return -ENODEV; | 
 | 787 | 	} | 
 | 788 |  | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 789 | 	phydev = phy_connect(dev, dev_name(&phydev->dev), | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 790 | 		&smsc911x_phy_adjust_link, 0, pdata->config.phy_interface); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 791 |  | 
 | 792 | 	if (IS_ERR(phydev)) { | 
 | 793 | 		pr_err("%s: Could not attach to PHY\n", dev->name); | 
 | 794 | 		return PTR_ERR(phydev); | 
 | 795 | 	} | 
 | 796 |  | 
 | 797 | 	pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 798 | 		dev->name, phydev->drv->name, | 
 | 799 | 		dev_name(&phydev->dev), phydev->irq); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 800 |  | 
 | 801 | 	/* mask with MAC supported features */ | 
 | 802 | 	phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | | 
 | 803 | 			      SUPPORTED_Asym_Pause); | 
 | 804 | 	phydev->advertising = phydev->supported; | 
 | 805 |  | 
 | 806 | 	pdata->phy_dev = phydev; | 
 | 807 | 	pdata->last_duplex = -1; | 
 | 808 | 	pdata->last_carrier = -1; | 
 | 809 |  | 
 | 810 | #ifdef USE_PHY_WORK_AROUND | 
 | 811 | 	if (smsc911x_phy_loopbacktest(dev) < 0) { | 
 | 812 | 		SMSC_WARNING(HW, "Failed Loop Back Test"); | 
 | 813 | 		return -ENODEV; | 
 | 814 | 	} | 
 | 815 | 	SMSC_TRACE(HW, "Passed Loop Back Test"); | 
 | 816 | #endif				/* USE_PHY_WORK_AROUND */ | 
 | 817 |  | 
 | 818 | 	SMSC_TRACE(HW, "phy initialised succesfully"); | 
 | 819 | 	return 0; | 
 | 820 | } | 
 | 821 |  | 
 | 822 | static int __devinit smsc911x_mii_init(struct platform_device *pdev, | 
 | 823 | 				       struct net_device *dev) | 
 | 824 | { | 
 | 825 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 826 | 	int err = -ENXIO, i; | 
 | 827 |  | 
 | 828 | 	pdata->mii_bus = mdiobus_alloc(); | 
 | 829 | 	if (!pdata->mii_bus) { | 
 | 830 | 		err = -ENOMEM; | 
 | 831 | 		goto err_out_1; | 
 | 832 | 	} | 
 | 833 |  | 
 | 834 | 	pdata->mii_bus->name = SMSC_MDIONAME; | 
 | 835 | 	snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); | 
 | 836 | 	pdata->mii_bus->priv = pdata; | 
 | 837 | 	pdata->mii_bus->read = smsc911x_mii_read; | 
 | 838 | 	pdata->mii_bus->write = smsc911x_mii_write; | 
 | 839 | 	pdata->mii_bus->irq = pdata->phy_irq; | 
 | 840 | 	for (i = 0; i < PHY_MAX_ADDR; ++i) | 
 | 841 | 		pdata->mii_bus->irq[i] = PHY_POLL; | 
 | 842 |  | 
 | 843 | 	pdata->mii_bus->parent = &pdev->dev; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 844 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 845 | 	switch (pdata->idrev & 0xFFFF0000) { | 
 | 846 | 	case 0x01170000: | 
 | 847 | 	case 0x01150000: | 
 | 848 | 	case 0x117A0000: | 
 | 849 | 	case 0x115A0000: | 
 | 850 | 		/* External PHY supported, try to autodetect */ | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 851 | 		smsc911x_phy_initialise_external(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 852 | 		break; | 
 | 853 | 	default: | 
 | 854 | 		SMSC_TRACE(HW, "External PHY is not supported, " | 
 | 855 | 			"using internal PHY"); | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 856 | 		pdata->using_extphy = 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 857 | 		break; | 
 | 858 | 	} | 
 | 859 |  | 
 | 860 | 	if (!pdata->using_extphy) { | 
 | 861 | 		/* Mask all PHYs except ID 1 (internal) */ | 
 | 862 | 		pdata->mii_bus->phy_mask = ~(1 << 1); | 
 | 863 | 	} | 
 | 864 |  | 
 | 865 | 	if (mdiobus_register(pdata->mii_bus)) { | 
 | 866 | 		SMSC_WARNING(PROBE, "Error registering mii bus"); | 
 | 867 | 		goto err_out_free_bus_2; | 
 | 868 | 	} | 
 | 869 |  | 
 | 870 | 	if (smsc911x_mii_probe(dev) < 0) { | 
 | 871 | 		SMSC_WARNING(PROBE, "Error registering mii bus"); | 
 | 872 | 		goto err_out_unregister_bus_3; | 
 | 873 | 	} | 
 | 874 |  | 
 | 875 | 	return 0; | 
 | 876 |  | 
 | 877 | err_out_unregister_bus_3: | 
 | 878 | 	mdiobus_unregister(pdata->mii_bus); | 
 | 879 | err_out_free_bus_2: | 
 | 880 | 	mdiobus_free(pdata->mii_bus); | 
 | 881 | err_out_1: | 
 | 882 | 	return err; | 
 | 883 | } | 
 | 884 |  | 
 | 885 | /* Gets the number of tx statuses in the fifo */ | 
 | 886 | static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) | 
 | 887 | { | 
 | 888 | 	return (smsc911x_reg_read(pdata, TX_FIFO_INF) | 
 | 889 | 		& TX_FIFO_INF_TSUSED_) >> 16; | 
 | 890 | } | 
 | 891 |  | 
 | 892 | /* Reads tx statuses and increments counters where necessary */ | 
 | 893 | static void smsc911x_tx_update_txcounters(struct net_device *dev) | 
 | 894 | { | 
 | 895 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 896 | 	unsigned int tx_stat; | 
 | 897 |  | 
 | 898 | 	while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { | 
 | 899 | 		if (unlikely(tx_stat & 0x80000000)) { | 
 | 900 | 			/* In this driver the packet tag is used as the packet | 
 | 901 | 			 * length. Since a packet length can never reach the | 
 | 902 | 			 * size of 0x8000, this bit is reserved. It is worth | 
 | 903 | 			 * noting that the "reserved bit" in the warning above | 
 | 904 | 			 * does not reference a hardware defined reserved bit | 
 | 905 | 			 * but rather a driver defined one. | 
 | 906 | 			 */ | 
 | 907 | 			SMSC_WARNING(HW, | 
 | 908 | 				"Packet tag reserved bit is high"); | 
 | 909 | 		} else { | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 910 | 			if (unlikely(tx_stat & TX_STS_ES_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 911 | 				dev->stats.tx_errors++; | 
 | 912 | 			} else { | 
 | 913 | 				dev->stats.tx_packets++; | 
 | 914 | 				dev->stats.tx_bytes += (tx_stat >> 16); | 
 | 915 | 			} | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 916 | 			if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 917 | 				dev->stats.collisions += 16; | 
 | 918 | 				dev->stats.tx_aborted_errors += 1; | 
 | 919 | 			} else { | 
 | 920 | 				dev->stats.collisions += | 
 | 921 | 				    ((tx_stat >> 3) & 0xF); | 
 | 922 | 			} | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 923 | 			if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 924 | 				dev->stats.tx_carrier_errors += 1; | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 925 | 			if (unlikely(tx_stat & TX_STS_LATE_COL_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 926 | 				dev->stats.collisions++; | 
 | 927 | 				dev->stats.tx_aborted_errors++; | 
 | 928 | 			} | 
 | 929 | 		} | 
 | 930 | 	} | 
 | 931 | } | 
 | 932 |  | 
 | 933 | /* Increments the Rx error counters */ | 
 | 934 | static void | 
 | 935 | smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) | 
 | 936 | { | 
 | 937 | 	int crc_err = 0; | 
 | 938 |  | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 939 | 	if (unlikely(rxstat & RX_STS_ES_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 940 | 		dev->stats.rx_errors++; | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 941 | 		if (unlikely(rxstat & RX_STS_CRC_ERR_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 942 | 			dev->stats.rx_crc_errors++; | 
 | 943 | 			crc_err = 1; | 
 | 944 | 		} | 
 | 945 | 	} | 
 | 946 | 	if (likely(!crc_err)) { | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 947 | 		if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && | 
 | 948 | 			     (rxstat & RX_STS_LENGTH_ERR_))) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 949 | 			dev->stats.rx_length_errors++; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 950 | 		if (rxstat & RX_STS_MCAST_) | 
 | 951 | 			dev->stats.multicast++; | 
 | 952 | 	} | 
 | 953 | } | 
 | 954 |  | 
 | 955 | /* Quickly dumps bad packets */ | 
 | 956 | static void | 
 | 957 | smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) | 
 | 958 | { | 
 | 959 | 	unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; | 
 | 960 |  | 
 | 961 | 	if (likely(pktwords >= 4)) { | 
 | 962 | 		unsigned int timeout = 500; | 
 | 963 | 		unsigned int val; | 
 | 964 | 		smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); | 
 | 965 | 		do { | 
 | 966 | 			udelay(1); | 
 | 967 | 			val = smsc911x_reg_read(pdata, RX_DP_CTRL); | 
| Steve Glendinning | 8dacd54 | 2009-03-04 07:33:24 +0000 | [diff] [blame] | 968 | 		} while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 969 |  | 
 | 970 | 		if (unlikely(timeout == 0)) | 
 | 971 | 			SMSC_WARNING(HW, "Timed out waiting for " | 
 | 972 | 				"RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); | 
 | 973 | 	} else { | 
 | 974 | 		unsigned int temp; | 
 | 975 | 		while (pktwords--) | 
 | 976 | 			temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); | 
 | 977 | 	} | 
 | 978 | } | 
 | 979 |  | 
 | 980 | /* NAPI poll function */ | 
 | 981 | static int smsc911x_poll(struct napi_struct *napi, int budget) | 
 | 982 | { | 
 | 983 | 	struct smsc911x_data *pdata = | 
 | 984 | 		container_of(napi, struct smsc911x_data, napi); | 
 | 985 | 	struct net_device *dev = pdata->dev; | 
 | 986 | 	int npackets = 0; | 
 | 987 |  | 
 | 988 | 	while (likely(netif_running(dev)) && (npackets < budget)) { | 
 | 989 | 		unsigned int pktlength; | 
 | 990 | 		unsigned int pktwords; | 
 | 991 | 		struct sk_buff *skb; | 
 | 992 | 		unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); | 
 | 993 |  | 
 | 994 | 		if (!rxstat) { | 
 | 995 | 			unsigned int temp; | 
 | 996 | 			/* We processed all packets available.  Tell NAPI it can | 
 | 997 | 			 * stop polling then re-enable rx interrupts */ | 
 | 998 | 			smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 999 | 			napi_complete(napi); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1000 | 			temp = smsc911x_reg_read(pdata, INT_EN); | 
 | 1001 | 			temp |= INT_EN_RSFL_EN_; | 
 | 1002 | 			smsc911x_reg_write(pdata, INT_EN, temp); | 
 | 1003 | 			break; | 
 | 1004 | 		} | 
 | 1005 |  | 
 | 1006 | 		/* Count packet for NAPI scheduling, even if it has an error. | 
 | 1007 | 		 * Error packets still require cycles to discard */ | 
 | 1008 | 		npackets++; | 
 | 1009 |  | 
 | 1010 | 		pktlength = ((rxstat & 0x3FFF0000) >> 16); | 
 | 1011 | 		pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; | 
 | 1012 | 		smsc911x_rx_counterrors(dev, rxstat); | 
 | 1013 |  | 
 | 1014 | 		if (unlikely(rxstat & RX_STS_ES_)) { | 
 | 1015 | 			SMSC_WARNING(RX_ERR, | 
 | 1016 | 				"Discarding packet with error bit set"); | 
 | 1017 | 			/* Packet has an error, discard it and continue with | 
 | 1018 | 			 * the next */ | 
 | 1019 | 			smsc911x_rx_fastforward(pdata, pktwords); | 
 | 1020 | 			dev->stats.rx_dropped++; | 
 | 1021 | 			continue; | 
 | 1022 | 		} | 
 | 1023 |  | 
 | 1024 | 		skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); | 
 | 1025 | 		if (unlikely(!skb)) { | 
 | 1026 | 			SMSC_WARNING(RX_ERR, | 
 | 1027 | 				"Unable to allocate skb for rx packet"); | 
 | 1028 | 			/* Drop the packet and stop this polling iteration */ | 
 | 1029 | 			smsc911x_rx_fastforward(pdata, pktwords); | 
 | 1030 | 			dev->stats.rx_dropped++; | 
 | 1031 | 			break; | 
 | 1032 | 		} | 
 | 1033 |  | 
 | 1034 | 		skb->data = skb->head; | 
 | 1035 | 		skb_reset_tail_pointer(skb); | 
 | 1036 |  | 
 | 1037 | 		/* Align IP on 16B boundary */ | 
 | 1038 | 		skb_reserve(skb, NET_IP_ALIGN); | 
 | 1039 | 		skb_put(skb, pktlength - 4); | 
 | 1040 | 		smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head, | 
 | 1041 | 				     pktwords); | 
 | 1042 | 		skb->protocol = eth_type_trans(skb, dev); | 
 | 1043 | 		skb->ip_summed = CHECKSUM_NONE; | 
 | 1044 | 		netif_receive_skb(skb); | 
 | 1045 |  | 
 | 1046 | 		/* Update counters */ | 
 | 1047 | 		dev->stats.rx_packets++; | 
 | 1048 | 		dev->stats.rx_bytes += (pktlength - 4); | 
 | 1049 | 		dev->last_rx = jiffies; | 
 | 1050 | 	} | 
 | 1051 |  | 
 | 1052 | 	/* Return total received packets */ | 
 | 1053 | 	return npackets; | 
 | 1054 | } | 
 | 1055 |  | 
 | 1056 | /* Returns hash bit number for given MAC address | 
 | 1057 |  * Example: | 
 | 1058 |  * 01 00 5E 00 00 01 -> returns bit number 31 */ | 
 | 1059 | static unsigned int smsc911x_hash(char addr[ETH_ALEN]) | 
 | 1060 | { | 
 | 1061 | 	return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; | 
 | 1062 | } | 
 | 1063 |  | 
 | 1064 | static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) | 
 | 1065 | { | 
 | 1066 | 	/* Performs the multicast & mac_cr update.  This is called when | 
 | 1067 | 	 * safe on the current hardware, and with the mac_lock held */ | 
 | 1068 | 	unsigned int mac_cr; | 
 | 1069 |  | 
 | 1070 | 	SMSC_ASSERT_MAC_LOCK(pdata); | 
 | 1071 |  | 
 | 1072 | 	mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
 | 1073 | 	mac_cr |= pdata->set_bits_mask; | 
 | 1074 | 	mac_cr &= ~(pdata->clear_bits_mask); | 
 | 1075 | 	smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
 | 1076 | 	smsc911x_mac_write(pdata, HASHH, pdata->hashhi); | 
 | 1077 | 	smsc911x_mac_write(pdata, HASHL, pdata->hashlo); | 
 | 1078 | 	SMSC_TRACE(HW, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", | 
 | 1079 | 		mac_cr, pdata->hashhi, pdata->hashlo); | 
 | 1080 | } | 
 | 1081 |  | 
 | 1082 | static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) | 
 | 1083 | { | 
 | 1084 | 	unsigned int mac_cr; | 
 | 1085 |  | 
 | 1086 | 	/* This function is only called for older LAN911x devices | 
 | 1087 | 	 * (revA or revB), where MAC_CR, HASHH and HASHL should not | 
 | 1088 | 	 * be modified during Rx - newer devices immediately update the | 
 | 1089 | 	 * registers. | 
 | 1090 | 	 * | 
 | 1091 | 	 * This is called from interrupt context */ | 
 | 1092 |  | 
 | 1093 | 	spin_lock(&pdata->mac_lock); | 
 | 1094 |  | 
 | 1095 | 	/* Check Rx has stopped */ | 
 | 1096 | 	if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) | 
 | 1097 | 		SMSC_WARNING(DRV, "Rx not stopped"); | 
 | 1098 |  | 
 | 1099 | 	/* Perform the update - safe to do now Rx has stopped */ | 
 | 1100 | 	smsc911x_rx_multicast_update(pdata); | 
 | 1101 |  | 
 | 1102 | 	/* Re-enable Rx */ | 
 | 1103 | 	mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
 | 1104 | 	mac_cr |= MAC_CR_RXEN_; | 
 | 1105 | 	smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
 | 1106 |  | 
 | 1107 | 	pdata->multicast_update_pending = 0; | 
 | 1108 |  | 
 | 1109 | 	spin_unlock(&pdata->mac_lock); | 
 | 1110 | } | 
 | 1111 |  | 
 | 1112 | static int smsc911x_soft_reset(struct smsc911x_data *pdata) | 
 | 1113 | { | 
 | 1114 | 	unsigned int timeout; | 
 | 1115 | 	unsigned int temp; | 
 | 1116 |  | 
 | 1117 | 	/* Reset the LAN911x */ | 
 | 1118 | 	smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); | 
 | 1119 | 	timeout = 10; | 
 | 1120 | 	do { | 
 | 1121 | 		udelay(10); | 
 | 1122 | 		temp = smsc911x_reg_read(pdata, HW_CFG); | 
 | 1123 | 	} while ((--timeout) && (temp & HW_CFG_SRST_)); | 
 | 1124 |  | 
 | 1125 | 	if (unlikely(temp & HW_CFG_SRST_)) { | 
 | 1126 | 		SMSC_WARNING(DRV, "Failed to complete reset"); | 
 | 1127 | 		return -EIO; | 
 | 1128 | 	} | 
 | 1129 | 	return 0; | 
 | 1130 | } | 
 | 1131 |  | 
 | 1132 | /* Sets the device MAC address to dev_addr, called with mac_lock held */ | 
 | 1133 | static void | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1134 | smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1135 | { | 
 | 1136 | 	u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; | 
 | 1137 | 	u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | | 
 | 1138 | 	    (dev_addr[1] << 8) | dev_addr[0]; | 
 | 1139 |  | 
 | 1140 | 	SMSC_ASSERT_MAC_LOCK(pdata); | 
 | 1141 |  | 
 | 1142 | 	smsc911x_mac_write(pdata, ADDRH, mac_high16); | 
 | 1143 | 	smsc911x_mac_write(pdata, ADDRL, mac_low32); | 
 | 1144 | } | 
 | 1145 |  | 
 | 1146 | static int smsc911x_open(struct net_device *dev) | 
 | 1147 | { | 
 | 1148 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1149 | 	unsigned int timeout; | 
 | 1150 | 	unsigned int temp; | 
 | 1151 | 	unsigned int intcfg; | 
 | 1152 |  | 
 | 1153 | 	/* if the phy is not yet registered, retry later*/ | 
 | 1154 | 	if (!pdata->phy_dev) { | 
 | 1155 | 		SMSC_WARNING(HW, "phy_dev is NULL"); | 
 | 1156 | 		return -EAGAIN; | 
 | 1157 | 	} | 
 | 1158 |  | 
 | 1159 | 	if (!is_valid_ether_addr(dev->dev_addr)) { | 
 | 1160 | 		SMSC_WARNING(HW, "dev_addr is not a valid MAC address"); | 
 | 1161 | 		return -EADDRNOTAVAIL; | 
 | 1162 | 	} | 
 | 1163 |  | 
 | 1164 | 	/* Reset the LAN911x */ | 
 | 1165 | 	if (smsc911x_soft_reset(pdata)) { | 
 | 1166 | 		SMSC_WARNING(HW, "soft reset failed"); | 
 | 1167 | 		return -EIO; | 
 | 1168 | 	} | 
 | 1169 |  | 
 | 1170 | 	smsc911x_reg_write(pdata, HW_CFG, 0x00050000); | 
 | 1171 | 	smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); | 
 | 1172 |  | 
 | 1173 | 	/* Make sure EEPROM has finished loading before setting GPIO_CFG */ | 
 | 1174 | 	timeout = 50; | 
| Steve Glendinning | f7efb6c | 2009-03-04 07:33:25 +0000 | [diff] [blame] | 1175 | 	while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && | 
 | 1176 | 	       --timeout) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1177 | 		udelay(10); | 
 | 1178 | 	} | 
 | 1179 |  | 
 | 1180 | 	if (unlikely(timeout == 0)) | 
 | 1181 | 		SMSC_WARNING(IFUP, | 
 | 1182 | 			"Timed out waiting for EEPROM busy bit to clear"); | 
 | 1183 |  | 
 | 1184 | 	smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); | 
 | 1185 |  | 
 | 1186 | 	/* The soft reset above cleared the device's MAC address, | 
 | 1187 | 	 * restore it from local copy (set in probe) */ | 
 | 1188 | 	spin_lock_irq(&pdata->mac_lock); | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1189 | 	smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1190 | 	spin_unlock_irq(&pdata->mac_lock); | 
 | 1191 |  | 
 | 1192 | 	/* Initialise irqs, but leave all sources disabled */ | 
 | 1193 | 	smsc911x_reg_write(pdata, INT_EN, 0); | 
 | 1194 | 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); | 
 | 1195 |  | 
 | 1196 | 	/* Set interrupt deassertion to 100uS */ | 
 | 1197 | 	intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); | 
 | 1198 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1199 | 	if (pdata->config.irq_polarity) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1200 | 		SMSC_TRACE(IFUP, "irq polarity: active high"); | 
 | 1201 | 		intcfg |= INT_CFG_IRQ_POL_; | 
 | 1202 | 	} else { | 
 | 1203 | 		SMSC_TRACE(IFUP, "irq polarity: active low"); | 
 | 1204 | 	} | 
 | 1205 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1206 | 	if (pdata->config.irq_type) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1207 | 		SMSC_TRACE(IFUP, "irq type: push-pull"); | 
 | 1208 | 		intcfg |= INT_CFG_IRQ_TYPE_; | 
 | 1209 | 	} else { | 
 | 1210 | 		SMSC_TRACE(IFUP, "irq type: open drain"); | 
 | 1211 | 	} | 
 | 1212 |  | 
 | 1213 | 	smsc911x_reg_write(pdata, INT_CFG, intcfg); | 
 | 1214 |  | 
 | 1215 | 	SMSC_TRACE(IFUP, "Testing irq handler using IRQ %d", dev->irq); | 
 | 1216 | 	pdata->software_irq_signal = 0; | 
 | 1217 | 	smp_wmb(); | 
 | 1218 |  | 
 | 1219 | 	temp = smsc911x_reg_read(pdata, INT_EN); | 
 | 1220 | 	temp |= INT_EN_SW_INT_EN_; | 
 | 1221 | 	smsc911x_reg_write(pdata, INT_EN, temp); | 
 | 1222 |  | 
 | 1223 | 	timeout = 1000; | 
 | 1224 | 	while (timeout--) { | 
 | 1225 | 		if (pdata->software_irq_signal) | 
 | 1226 | 			break; | 
 | 1227 | 		msleep(1); | 
 | 1228 | 	} | 
 | 1229 |  | 
 | 1230 | 	if (!pdata->software_irq_signal) { | 
 | 1231 | 		dev_warn(&dev->dev, "ISR failed signaling test (IRQ %d)\n", | 
 | 1232 | 			 dev->irq); | 
 | 1233 | 		return -ENODEV; | 
 | 1234 | 	} | 
 | 1235 | 	SMSC_TRACE(IFUP, "IRQ handler passed test using IRQ %d", dev->irq); | 
 | 1236 |  | 
 | 1237 | 	dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", | 
 | 1238 | 		 (unsigned long)pdata->ioaddr, dev->irq); | 
 | 1239 |  | 
| Steve Glendinning | 44c1d6f | 2009-03-18 23:37:18 -0700 | [diff] [blame] | 1240 | 	/* Reset the last known duplex and carrier */ | 
 | 1241 | 	pdata->last_duplex = -1; | 
 | 1242 | 	pdata->last_carrier = -1; | 
 | 1243 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1244 | 	/* Bring the PHY up */ | 
 | 1245 | 	phy_start(pdata->phy_dev); | 
 | 1246 |  | 
 | 1247 | 	temp = smsc911x_reg_read(pdata, HW_CFG); | 
 | 1248 | 	/* Preserve TX FIFO size and external PHY configuration */ | 
 | 1249 | 	temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); | 
 | 1250 | 	temp |= HW_CFG_SF_; | 
 | 1251 | 	smsc911x_reg_write(pdata, HW_CFG, temp); | 
 | 1252 |  | 
 | 1253 | 	temp = smsc911x_reg_read(pdata, FIFO_INT); | 
 | 1254 | 	temp |= FIFO_INT_TX_AVAIL_LEVEL_; | 
 | 1255 | 	temp &= ~(FIFO_INT_RX_STS_LEVEL_); | 
 | 1256 | 	smsc911x_reg_write(pdata, FIFO_INT, temp); | 
 | 1257 |  | 
 | 1258 | 	/* set RX Data offset to 2 bytes for alignment */ | 
 | 1259 | 	smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); | 
 | 1260 |  | 
 | 1261 | 	/* enable NAPI polling before enabling RX interrupts */ | 
 | 1262 | 	napi_enable(&pdata->napi); | 
 | 1263 |  | 
 | 1264 | 	temp = smsc911x_reg_read(pdata, INT_EN); | 
| Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1265 | 	temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1266 | 	smsc911x_reg_write(pdata, INT_EN, temp); | 
 | 1267 |  | 
 | 1268 | 	spin_lock_irq(&pdata->mac_lock); | 
 | 1269 | 	temp = smsc911x_mac_read(pdata, MAC_CR); | 
 | 1270 | 	temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); | 
 | 1271 | 	smsc911x_mac_write(pdata, MAC_CR, temp); | 
 | 1272 | 	spin_unlock_irq(&pdata->mac_lock); | 
 | 1273 |  | 
 | 1274 | 	smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); | 
 | 1275 |  | 
 | 1276 | 	netif_start_queue(dev); | 
 | 1277 | 	return 0; | 
 | 1278 | } | 
 | 1279 |  | 
 | 1280 | /* Entry point for stopping the interface */ | 
 | 1281 | static int smsc911x_stop(struct net_device *dev) | 
 | 1282 | { | 
 | 1283 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1284 | 	unsigned int temp; | 
 | 1285 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1286 | 	/* Disable all device interrupts */ | 
 | 1287 | 	temp = smsc911x_reg_read(pdata, INT_CFG); | 
 | 1288 | 	temp &= ~INT_CFG_IRQ_EN_; | 
 | 1289 | 	smsc911x_reg_write(pdata, INT_CFG, temp); | 
 | 1290 |  | 
 | 1291 | 	/* Stop Tx and Rx polling */ | 
 | 1292 | 	netif_stop_queue(dev); | 
 | 1293 | 	napi_disable(&pdata->napi); | 
 | 1294 |  | 
 | 1295 | 	/* At this point all Rx and Tx activity is stopped */ | 
 | 1296 | 	dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); | 
 | 1297 | 	smsc911x_tx_update_txcounters(dev); | 
 | 1298 |  | 
 | 1299 | 	/* Bring the PHY down */ | 
| Steve Glendinning | dd04519 | 2008-12-25 16:40:19 -0800 | [diff] [blame] | 1300 | 	if (pdata->phy_dev) | 
 | 1301 | 		phy_stop(pdata->phy_dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1302 |  | 
 | 1303 | 	SMSC_TRACE(IFDOWN, "Interface stopped"); | 
 | 1304 | 	return 0; | 
 | 1305 | } | 
 | 1306 |  | 
 | 1307 | /* Entry point for transmitting a packet */ | 
 | 1308 | static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | 1309 | { | 
 | 1310 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1311 | 	unsigned int freespace; | 
 | 1312 | 	unsigned int tx_cmd_a; | 
 | 1313 | 	unsigned int tx_cmd_b; | 
 | 1314 | 	unsigned int temp; | 
 | 1315 | 	u32 wrsz; | 
 | 1316 | 	ulong bufp; | 
 | 1317 |  | 
 | 1318 | 	freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; | 
 | 1319 |  | 
 | 1320 | 	if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) | 
 | 1321 | 		SMSC_WARNING(TX_ERR, | 
 | 1322 | 			"Tx data fifo low, space available: %d", freespace); | 
 | 1323 |  | 
 | 1324 | 	/* Word alignment adjustment */ | 
 | 1325 | 	tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; | 
 | 1326 | 	tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; | 
 | 1327 | 	tx_cmd_a |= (unsigned int)skb->len; | 
 | 1328 |  | 
 | 1329 | 	tx_cmd_b = ((unsigned int)skb->len) << 16; | 
 | 1330 | 	tx_cmd_b |= (unsigned int)skb->len; | 
 | 1331 |  | 
 | 1332 | 	smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); | 
 | 1333 | 	smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); | 
 | 1334 |  | 
 | 1335 | 	bufp = (ulong)skb->data & (~0x3); | 
 | 1336 | 	wrsz = (u32)skb->len + 3; | 
 | 1337 | 	wrsz += (u32)((ulong)skb->data & 0x3); | 
 | 1338 | 	wrsz >>= 2; | 
 | 1339 |  | 
 | 1340 | 	smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); | 
 | 1341 | 	freespace -= (skb->len + 32); | 
 | 1342 | 	dev_kfree_skb(skb); | 
 | 1343 | 	dev->trans_start = jiffies; | 
 | 1344 |  | 
 | 1345 | 	if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) | 
 | 1346 | 		smsc911x_tx_update_txcounters(dev); | 
 | 1347 |  | 
 | 1348 | 	if (freespace < TX_FIFO_LOW_THRESHOLD) { | 
 | 1349 | 		netif_stop_queue(dev); | 
 | 1350 | 		temp = smsc911x_reg_read(pdata, FIFO_INT); | 
 | 1351 | 		temp &= 0x00FFFFFF; | 
 | 1352 | 		temp |= 0x32000000; | 
 | 1353 | 		smsc911x_reg_write(pdata, FIFO_INT, temp); | 
 | 1354 | 	} | 
 | 1355 |  | 
 | 1356 | 	return NETDEV_TX_OK; | 
 | 1357 | } | 
 | 1358 |  | 
 | 1359 | /* Entry point for getting status counters */ | 
 | 1360 | static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) | 
 | 1361 | { | 
 | 1362 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1363 | 	smsc911x_tx_update_txcounters(dev); | 
 | 1364 | 	dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); | 
 | 1365 | 	return &dev->stats; | 
 | 1366 | } | 
 | 1367 |  | 
 | 1368 | /* Entry point for setting addressing modes */ | 
 | 1369 | static void smsc911x_set_multicast_list(struct net_device *dev) | 
 | 1370 | { | 
 | 1371 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1372 | 	unsigned long flags; | 
 | 1373 |  | 
 | 1374 | 	if (dev->flags & IFF_PROMISC) { | 
 | 1375 | 		/* Enabling promiscuous mode */ | 
 | 1376 | 		pdata->set_bits_mask = MAC_CR_PRMS_; | 
 | 1377 | 		pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); | 
 | 1378 | 		pdata->hashhi = 0; | 
 | 1379 | 		pdata->hashlo = 0; | 
 | 1380 | 	} else if (dev->flags & IFF_ALLMULTI) { | 
 | 1381 | 		/* Enabling all multicast mode */ | 
 | 1382 | 		pdata->set_bits_mask = MAC_CR_MCPAS_; | 
 | 1383 | 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); | 
 | 1384 | 		pdata->hashhi = 0; | 
 | 1385 | 		pdata->hashlo = 0; | 
 | 1386 | 	} else if (dev->mc_count > 0) { | 
 | 1387 | 		/* Enabling specific multicast addresses */ | 
 | 1388 | 		unsigned int hash_high = 0; | 
 | 1389 | 		unsigned int hash_low = 0; | 
 | 1390 | 		unsigned int count = 0; | 
 | 1391 | 		struct dev_mc_list *mc_list = dev->mc_list; | 
 | 1392 |  | 
 | 1393 | 		pdata->set_bits_mask = MAC_CR_HPFILT_; | 
 | 1394 | 		pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); | 
 | 1395 |  | 
 | 1396 | 		while (mc_list) { | 
 | 1397 | 			count++; | 
 | 1398 | 			if ((mc_list->dmi_addrlen) == ETH_ALEN) { | 
 | 1399 | 				unsigned int bitnum = | 
 | 1400 | 				    smsc911x_hash(mc_list->dmi_addr); | 
 | 1401 | 				unsigned int mask = 0x01 << (bitnum & 0x1F); | 
 | 1402 | 				if (bitnum & 0x20) | 
 | 1403 | 					hash_high |= mask; | 
 | 1404 | 				else | 
 | 1405 | 					hash_low |= mask; | 
 | 1406 | 			} else { | 
 | 1407 | 				SMSC_WARNING(DRV, "dmi_addrlen != 6"); | 
 | 1408 | 			} | 
 | 1409 | 			mc_list = mc_list->next; | 
 | 1410 | 		} | 
 | 1411 | 		if (count != (unsigned int)dev->mc_count) | 
 | 1412 | 			SMSC_WARNING(DRV, "mc_count != dev->mc_count"); | 
 | 1413 |  | 
 | 1414 | 		pdata->hashhi = hash_high; | 
 | 1415 | 		pdata->hashlo = hash_low; | 
 | 1416 | 	} else { | 
 | 1417 | 		/* Enabling local MAC address only */ | 
 | 1418 | 		pdata->set_bits_mask = 0; | 
 | 1419 | 		pdata->clear_bits_mask = | 
 | 1420 | 		    (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); | 
 | 1421 | 		pdata->hashhi = 0; | 
 | 1422 | 		pdata->hashlo = 0; | 
 | 1423 | 	} | 
 | 1424 |  | 
 | 1425 | 	spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 1426 |  | 
 | 1427 | 	if (pdata->generation <= 1) { | 
 | 1428 | 		/* Older hardware revision - cannot change these flags while | 
 | 1429 | 		 * receiving data */ | 
 | 1430 | 		if (!pdata->multicast_update_pending) { | 
 | 1431 | 			unsigned int temp; | 
 | 1432 | 			SMSC_TRACE(HW, "scheduling mcast update"); | 
 | 1433 | 			pdata->multicast_update_pending = 1; | 
 | 1434 |  | 
 | 1435 | 			/* Request the hardware to stop, then perform the | 
 | 1436 | 			 * update when we get an RX_STOP interrupt */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1437 | 			temp = smsc911x_mac_read(pdata, MAC_CR); | 
 | 1438 | 			temp &= ~(MAC_CR_RXEN_); | 
 | 1439 | 			smsc911x_mac_write(pdata, MAC_CR, temp); | 
 | 1440 | 		} else { | 
 | 1441 | 			/* There is another update pending, this should now | 
 | 1442 | 			 * use the newer values */ | 
 | 1443 | 		} | 
 | 1444 | 	} else { | 
 | 1445 | 		/* Newer hardware revision - can write immediately */ | 
 | 1446 | 		smsc911x_rx_multicast_update(pdata); | 
 | 1447 | 	} | 
 | 1448 |  | 
 | 1449 | 	spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 1450 | } | 
 | 1451 |  | 
 | 1452 | static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) | 
 | 1453 | { | 
 | 1454 | 	struct net_device *dev = dev_id; | 
 | 1455 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1456 | 	u32 intsts = smsc911x_reg_read(pdata, INT_STS); | 
 | 1457 | 	u32 inten = smsc911x_reg_read(pdata, INT_EN); | 
 | 1458 | 	int serviced = IRQ_NONE; | 
 | 1459 | 	u32 temp; | 
 | 1460 |  | 
 | 1461 | 	if (unlikely(intsts & inten & INT_STS_SW_INT_)) { | 
 | 1462 | 		temp = smsc911x_reg_read(pdata, INT_EN); | 
 | 1463 | 		temp &= (~INT_EN_SW_INT_EN_); | 
 | 1464 | 		smsc911x_reg_write(pdata, INT_EN, temp); | 
 | 1465 | 		smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); | 
 | 1466 | 		pdata->software_irq_signal = 1; | 
 | 1467 | 		smp_wmb(); | 
 | 1468 | 		serviced = IRQ_HANDLED; | 
 | 1469 | 	} | 
 | 1470 |  | 
 | 1471 | 	if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { | 
 | 1472 | 		/* Called when there is a multicast update scheduled and | 
 | 1473 | 		 * it is now safe to complete the update */ | 
 | 1474 | 		SMSC_TRACE(INTR, "RX Stop interrupt"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1475 | 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); | 
| Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1476 | 		if (pdata->multicast_update_pending) | 
 | 1477 | 			smsc911x_rx_multicast_update_workaround(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1478 | 		serviced = IRQ_HANDLED; | 
 | 1479 | 	} | 
 | 1480 |  | 
 | 1481 | 	if (intsts & inten & INT_STS_TDFA_) { | 
 | 1482 | 		temp = smsc911x_reg_read(pdata, FIFO_INT); | 
 | 1483 | 		temp |= FIFO_INT_TX_AVAIL_LEVEL_; | 
 | 1484 | 		smsc911x_reg_write(pdata, FIFO_INT, temp); | 
 | 1485 | 		smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); | 
 | 1486 | 		netif_wake_queue(dev); | 
 | 1487 | 		serviced = IRQ_HANDLED; | 
 | 1488 | 	} | 
 | 1489 |  | 
 | 1490 | 	if (unlikely(intsts & inten & INT_STS_RXE_)) { | 
 | 1491 | 		SMSC_TRACE(INTR, "RX Error interrupt"); | 
 | 1492 | 		smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); | 
 | 1493 | 		serviced = IRQ_HANDLED; | 
 | 1494 | 	} | 
 | 1495 |  | 
 | 1496 | 	if (likely(intsts & inten & INT_STS_RSFL_)) { | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1497 | 		if (likely(napi_schedule_prep(&pdata->napi))) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1498 | 			/* Disable Rx interrupts */ | 
 | 1499 | 			temp = smsc911x_reg_read(pdata, INT_EN); | 
 | 1500 | 			temp &= (~INT_EN_RSFL_EN_); | 
 | 1501 | 			smsc911x_reg_write(pdata, INT_EN, temp); | 
 | 1502 | 			/* Schedule a NAPI poll */ | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1503 | 			__napi_schedule(&pdata->napi); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1504 | 		} else { | 
 | 1505 | 			SMSC_WARNING(RX_ERR, | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1506 | 				"napi_schedule_prep failed"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1507 | 		} | 
 | 1508 | 		serviced = IRQ_HANDLED; | 
 | 1509 | 	} | 
 | 1510 |  | 
 | 1511 | 	return serviced; | 
 | 1512 | } | 
 | 1513 |  | 
 | 1514 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
| Steve Glendinning | 1757ab2 | 2008-12-12 22:31:16 -0800 | [diff] [blame] | 1515 | static void smsc911x_poll_controller(struct net_device *dev) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1516 | { | 
 | 1517 | 	disable_irq(dev->irq); | 
 | 1518 | 	smsc911x_irqhandler(0, dev); | 
 | 1519 | 	enable_irq(dev->irq); | 
 | 1520 | } | 
 | 1521 | #endif				/* CONFIG_NET_POLL_CONTROLLER */ | 
 | 1522 |  | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1523 | static int smsc911x_set_mac_address(struct net_device *dev, void *p) | 
 | 1524 | { | 
 | 1525 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1526 | 	struct sockaddr *addr = p; | 
 | 1527 |  | 
 | 1528 | 	/* On older hardware revisions we cannot change the mac address | 
 | 1529 | 	 * registers while receiving data.  Newer devices can safely change | 
 | 1530 | 	 * this at any time. */ | 
 | 1531 | 	if (pdata->generation <= 1 && netif_running(dev)) | 
 | 1532 | 		return -EBUSY; | 
 | 1533 |  | 
 | 1534 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 1535 | 		return -EADDRNOTAVAIL; | 
 | 1536 |  | 
 | 1537 | 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); | 
 | 1538 |  | 
 | 1539 | 	spin_lock_irq(&pdata->mac_lock); | 
 | 1540 | 	smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
 | 1541 | 	spin_unlock_irq(&pdata->mac_lock); | 
 | 1542 |  | 
 | 1543 | 	dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); | 
 | 1544 |  | 
 | 1545 | 	return 0; | 
 | 1546 | } | 
 | 1547 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1548 | /* Standard ioctls for mii-tool */ | 
 | 1549 | static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | 
 | 1550 | { | 
 | 1551 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1552 |  | 
 | 1553 | 	if (!netif_running(dev) || !pdata->phy_dev) | 
 | 1554 | 		return -EINVAL; | 
 | 1555 |  | 
 | 1556 | 	return phy_mii_ioctl(pdata->phy_dev, if_mii(ifr), cmd); | 
 | 1557 | } | 
 | 1558 |  | 
 | 1559 | static int | 
 | 1560 | smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | 1561 | { | 
 | 1562 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1563 |  | 
 | 1564 | 	cmd->maxtxpkt = 1; | 
 | 1565 | 	cmd->maxrxpkt = 1; | 
 | 1566 | 	return phy_ethtool_gset(pdata->phy_dev, cmd); | 
 | 1567 | } | 
 | 1568 |  | 
 | 1569 | static int | 
 | 1570 | smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) | 
 | 1571 | { | 
 | 1572 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1573 |  | 
 | 1574 | 	return phy_ethtool_sset(pdata->phy_dev, cmd); | 
 | 1575 | } | 
 | 1576 |  | 
 | 1577 | static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, | 
 | 1578 | 					struct ethtool_drvinfo *info) | 
 | 1579 | { | 
 | 1580 | 	strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); | 
 | 1581 | 	strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 1582 | 	strlcpy(info->bus_info, dev_name(dev->dev.parent), | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1583 | 		sizeof(info->bus_info)); | 
 | 1584 | } | 
 | 1585 |  | 
 | 1586 | static int smsc911x_ethtool_nwayreset(struct net_device *dev) | 
 | 1587 | { | 
 | 1588 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1589 |  | 
 | 1590 | 	return phy_start_aneg(pdata->phy_dev); | 
 | 1591 | } | 
 | 1592 |  | 
 | 1593 | static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) | 
 | 1594 | { | 
 | 1595 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1596 | 	return pdata->msg_enable; | 
 | 1597 | } | 
 | 1598 |  | 
 | 1599 | static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) | 
 | 1600 | { | 
 | 1601 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1602 | 	pdata->msg_enable = level; | 
 | 1603 | } | 
 | 1604 |  | 
 | 1605 | static int smsc911x_ethtool_getregslen(struct net_device *dev) | 
 | 1606 | { | 
 | 1607 | 	return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * | 
 | 1608 | 	    sizeof(u32); | 
 | 1609 | } | 
 | 1610 |  | 
 | 1611 | static void | 
 | 1612 | smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, | 
 | 1613 | 			 void *buf) | 
 | 1614 | { | 
 | 1615 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1616 | 	struct phy_device *phy_dev = pdata->phy_dev; | 
 | 1617 | 	unsigned long flags; | 
 | 1618 | 	unsigned int i; | 
 | 1619 | 	unsigned int j = 0; | 
 | 1620 | 	u32 *data = buf; | 
 | 1621 |  | 
 | 1622 | 	regs->version = pdata->idrev; | 
 | 1623 | 	for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) | 
 | 1624 | 		data[j++] = smsc911x_reg_read(pdata, i); | 
 | 1625 |  | 
 | 1626 | 	for (i = MAC_CR; i <= WUCSR; i++) { | 
 | 1627 | 		spin_lock_irqsave(&pdata->mac_lock, flags); | 
 | 1628 | 		data[j++] = smsc911x_mac_read(pdata, i); | 
 | 1629 | 		spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
 | 1630 | 	} | 
 | 1631 |  | 
 | 1632 | 	for (i = 0; i <= 31; i++) | 
 | 1633 | 		data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); | 
 | 1634 | } | 
 | 1635 |  | 
 | 1636 | static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) | 
 | 1637 | { | 
 | 1638 | 	unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); | 
 | 1639 | 	temp &= ~GPIO_CFG_EEPR_EN_; | 
 | 1640 | 	smsc911x_reg_write(pdata, GPIO_CFG, temp); | 
 | 1641 | 	msleep(1); | 
 | 1642 | } | 
 | 1643 |  | 
 | 1644 | static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) | 
 | 1645 | { | 
 | 1646 | 	int timeout = 100; | 
 | 1647 | 	u32 e2cmd; | 
 | 1648 |  | 
 | 1649 | 	SMSC_TRACE(DRV, "op 0x%08x", op); | 
 | 1650 | 	if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { | 
 | 1651 | 		SMSC_WARNING(DRV, "Busy at start"); | 
 | 1652 | 		return -EBUSY; | 
 | 1653 | 	} | 
 | 1654 |  | 
 | 1655 | 	e2cmd = op | E2P_CMD_EPC_BUSY_; | 
 | 1656 | 	smsc911x_reg_write(pdata, E2P_CMD, e2cmd); | 
 | 1657 |  | 
 | 1658 | 	do { | 
 | 1659 | 		msleep(1); | 
 | 1660 | 		e2cmd = smsc911x_reg_read(pdata, E2P_CMD); | 
| Roel Kluin | 2cf0dbe | 2009-02-20 00:52:19 -0800 | [diff] [blame] | 1661 | 	} while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1662 |  | 
 | 1663 | 	if (!timeout) { | 
 | 1664 | 		SMSC_TRACE(DRV, "TIMED OUT"); | 
 | 1665 | 		return -EAGAIN; | 
 | 1666 | 	} | 
 | 1667 |  | 
 | 1668 | 	if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { | 
 | 1669 | 		SMSC_TRACE(DRV, "Error occured during eeprom operation"); | 
 | 1670 | 		return -EINVAL; | 
 | 1671 | 	} | 
 | 1672 |  | 
 | 1673 | 	return 0; | 
 | 1674 | } | 
 | 1675 |  | 
 | 1676 | static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, | 
 | 1677 | 					 u8 address, u8 *data) | 
 | 1678 | { | 
 | 1679 | 	u32 op = E2P_CMD_EPC_CMD_READ_ | address; | 
 | 1680 | 	int ret; | 
 | 1681 |  | 
 | 1682 | 	SMSC_TRACE(DRV, "address 0x%x", address); | 
 | 1683 | 	ret = smsc911x_eeprom_send_cmd(pdata, op); | 
 | 1684 |  | 
 | 1685 | 	if (!ret) | 
 | 1686 | 		data[address] = smsc911x_reg_read(pdata, E2P_DATA); | 
 | 1687 |  | 
 | 1688 | 	return ret; | 
 | 1689 | } | 
 | 1690 |  | 
 | 1691 | static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, | 
 | 1692 | 					  u8 address, u8 data) | 
 | 1693 | { | 
 | 1694 | 	u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; | 
| Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1695 | 	u32 temp; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1696 | 	int ret; | 
 | 1697 |  | 
 | 1698 | 	SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data); | 
 | 1699 | 	ret = smsc911x_eeprom_send_cmd(pdata, op); | 
 | 1700 |  | 
 | 1701 | 	if (!ret) { | 
 | 1702 | 		op = E2P_CMD_EPC_CMD_WRITE_ | address; | 
 | 1703 | 		smsc911x_reg_write(pdata, E2P_DATA, (u32)data); | 
| Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1704 |  | 
 | 1705 | 		/* Workaround for hardware read-after-write restriction */ | 
 | 1706 | 		temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 1707 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1708 | 		ret = smsc911x_eeprom_send_cmd(pdata, op); | 
 | 1709 | 	} | 
 | 1710 |  | 
 | 1711 | 	return ret; | 
 | 1712 | } | 
 | 1713 |  | 
 | 1714 | static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) | 
 | 1715 | { | 
 | 1716 | 	return SMSC911X_EEPROM_SIZE; | 
 | 1717 | } | 
 | 1718 |  | 
 | 1719 | static int smsc911x_ethtool_get_eeprom(struct net_device *dev, | 
 | 1720 | 				       struct ethtool_eeprom *eeprom, u8 *data) | 
 | 1721 | { | 
 | 1722 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1723 | 	u8 eeprom_data[SMSC911X_EEPROM_SIZE]; | 
 | 1724 | 	int len; | 
 | 1725 | 	int i; | 
 | 1726 |  | 
 | 1727 | 	smsc911x_eeprom_enable_access(pdata); | 
 | 1728 |  | 
 | 1729 | 	len = min(eeprom->len, SMSC911X_EEPROM_SIZE); | 
 | 1730 | 	for (i = 0; i < len; i++) { | 
 | 1731 | 		int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); | 
 | 1732 | 		if (ret < 0) { | 
 | 1733 | 			eeprom->len = 0; | 
 | 1734 | 			return ret; | 
 | 1735 | 		} | 
 | 1736 | 	} | 
 | 1737 |  | 
 | 1738 | 	memcpy(data, &eeprom_data[eeprom->offset], len); | 
 | 1739 | 	eeprom->len = len; | 
 | 1740 | 	return 0; | 
 | 1741 | } | 
 | 1742 |  | 
 | 1743 | static int smsc911x_ethtool_set_eeprom(struct net_device *dev, | 
 | 1744 | 				       struct ethtool_eeprom *eeprom, u8 *data) | 
 | 1745 | { | 
 | 1746 | 	int ret; | 
 | 1747 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1748 |  | 
 | 1749 | 	smsc911x_eeprom_enable_access(pdata); | 
 | 1750 | 	smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); | 
 | 1751 | 	ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); | 
 | 1752 | 	smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); | 
 | 1753 |  | 
 | 1754 | 	/* Single byte write, according to man page */ | 
 | 1755 | 	eeprom->len = 1; | 
 | 1756 |  | 
 | 1757 | 	return ret; | 
 | 1758 | } | 
 | 1759 |  | 
| Steve Glendinning | cb5b04f | 2008-12-25 16:41:09 -0800 | [diff] [blame] | 1760 | static const struct ethtool_ops smsc911x_ethtool_ops = { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1761 | 	.get_settings = smsc911x_ethtool_getsettings, | 
 | 1762 | 	.set_settings = smsc911x_ethtool_setsettings, | 
 | 1763 | 	.get_link = ethtool_op_get_link, | 
 | 1764 | 	.get_drvinfo = smsc911x_ethtool_getdrvinfo, | 
 | 1765 | 	.nway_reset = smsc911x_ethtool_nwayreset, | 
 | 1766 | 	.get_msglevel = smsc911x_ethtool_getmsglevel, | 
 | 1767 | 	.set_msglevel = smsc911x_ethtool_setmsglevel, | 
 | 1768 | 	.get_regs_len = smsc911x_ethtool_getregslen, | 
 | 1769 | 	.get_regs = smsc911x_ethtool_getregs, | 
 | 1770 | 	.get_eeprom_len = smsc911x_ethtool_get_eeprom_len, | 
 | 1771 | 	.get_eeprom = smsc911x_ethtool_get_eeprom, | 
 | 1772 | 	.set_eeprom = smsc911x_ethtool_set_eeprom, | 
 | 1773 | }; | 
 | 1774 |  | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1775 | static const struct net_device_ops smsc911x_netdev_ops = { | 
 | 1776 | 	.ndo_open		= smsc911x_open, | 
 | 1777 | 	.ndo_stop		= smsc911x_stop, | 
 | 1778 | 	.ndo_start_xmit		= smsc911x_hard_start_xmit, | 
 | 1779 | 	.ndo_get_stats		= smsc911x_get_stats, | 
 | 1780 | 	.ndo_set_multicast_list	= smsc911x_set_multicast_list, | 
 | 1781 | 	.ndo_do_ioctl		= smsc911x_do_ioctl, | 
 | 1782 | 	.ndo_validate_addr	= eth_validate_addr, | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1783 | 	.ndo_set_mac_address 	= smsc911x_set_mac_address, | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1784 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 1785 | 	.ndo_poll_controller	= smsc911x_poll_controller, | 
 | 1786 | #endif | 
 | 1787 | }; | 
 | 1788 |  | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1789 | /* copies the current mac address from hardware to dev->dev_addr */ | 
 | 1790 | static void __devinit smsc911x_read_mac_address(struct net_device *dev) | 
 | 1791 | { | 
 | 1792 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1793 | 	u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); | 
 | 1794 | 	u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); | 
 | 1795 |  | 
 | 1796 | 	dev->dev_addr[0] = (u8)(mac_low32); | 
 | 1797 | 	dev->dev_addr[1] = (u8)(mac_low32 >> 8); | 
 | 1798 | 	dev->dev_addr[2] = (u8)(mac_low32 >> 16); | 
 | 1799 | 	dev->dev_addr[3] = (u8)(mac_low32 >> 24); | 
 | 1800 | 	dev->dev_addr[4] = (u8)(mac_high16); | 
 | 1801 | 	dev->dev_addr[5] = (u8)(mac_high16 >> 8); | 
 | 1802 | } | 
 | 1803 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1804 | /* Initializing private device structures, only called from probe */ | 
 | 1805 | static int __devinit smsc911x_init(struct net_device *dev) | 
 | 1806 | { | 
 | 1807 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 1808 | 	unsigned int byte_test; | 
 | 1809 |  | 
 | 1810 | 	SMSC_TRACE(PROBE, "Driver Parameters:"); | 
 | 1811 | 	SMSC_TRACE(PROBE, "LAN base: 0x%08lX", | 
 | 1812 | 		(unsigned long)pdata->ioaddr); | 
 | 1813 | 	SMSC_TRACE(PROBE, "IRQ: %d", dev->irq); | 
 | 1814 | 	SMSC_TRACE(PROBE, "PHY will be autodetected."); | 
 | 1815 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1816 | 	spin_lock_init(&pdata->dev_lock); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1817 |  | 
 | 1818 | 	if (pdata->ioaddr == 0) { | 
 | 1819 | 		SMSC_WARNING(PROBE, "pdata->ioaddr: 0x00000000"); | 
 | 1820 | 		return -ENODEV; | 
 | 1821 | 	} | 
 | 1822 |  | 
 | 1823 | 	/* Check byte ordering */ | 
 | 1824 | 	byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 1825 | 	SMSC_TRACE(PROBE, "BYTE_TEST: 0x%08X", byte_test); | 
 | 1826 | 	if (byte_test == 0x43218765) { | 
 | 1827 | 		SMSC_TRACE(PROBE, "BYTE_TEST looks swapped, " | 
 | 1828 | 			"applying WORD_SWAP"); | 
 | 1829 | 		smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); | 
 | 1830 |  | 
 | 1831 | 		/* 1 dummy read of BYTE_TEST is needed after a write to | 
 | 1832 | 		 * WORD_SWAP before its contents are valid */ | 
 | 1833 | 		byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 1834 |  | 
 | 1835 | 		byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
 | 1836 | 	} | 
 | 1837 |  | 
 | 1838 | 	if (byte_test != 0x87654321) { | 
 | 1839 | 		SMSC_WARNING(DRV, "BYTE_TEST: 0x%08X", byte_test); | 
 | 1840 | 		if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { | 
 | 1841 | 			SMSC_WARNING(PROBE, | 
 | 1842 | 				"top 16 bits equal to bottom 16 bits"); | 
 | 1843 | 			SMSC_TRACE(PROBE, "This may mean the chip is set " | 
 | 1844 | 				"for 32 bit while the bus is reading 16 bit"); | 
 | 1845 | 		} | 
 | 1846 | 		return -ENODEV; | 
 | 1847 | 	} | 
 | 1848 |  | 
 | 1849 | 	/* Default generation to zero (all workarounds apply) */ | 
 | 1850 | 	pdata->generation = 0; | 
 | 1851 |  | 
 | 1852 | 	pdata->idrev = smsc911x_reg_read(pdata, ID_REV); | 
 | 1853 | 	switch (pdata->idrev & 0xFFFF0000) { | 
 | 1854 | 	case 0x01180000: | 
 | 1855 | 	case 0x01170000: | 
 | 1856 | 	case 0x01160000: | 
 | 1857 | 	case 0x01150000: | 
 | 1858 | 		/* LAN911[5678] family */ | 
 | 1859 | 		pdata->generation = pdata->idrev & 0x0000FFFF; | 
 | 1860 | 		break; | 
 | 1861 |  | 
 | 1862 | 	case 0x118A0000: | 
 | 1863 | 	case 0x117A0000: | 
 | 1864 | 	case 0x116A0000: | 
 | 1865 | 	case 0x115A0000: | 
 | 1866 | 		/* LAN921[5678] family */ | 
 | 1867 | 		pdata->generation = 3; | 
 | 1868 | 		break; | 
 | 1869 |  | 
 | 1870 | 	case 0x92100000: | 
 | 1871 | 	case 0x92110000: | 
 | 1872 | 	case 0x92200000: | 
 | 1873 | 	case 0x92210000: | 
 | 1874 | 		/* LAN9210/LAN9211/LAN9220/LAN9221 */ | 
 | 1875 | 		pdata->generation = 4; | 
 | 1876 | 		break; | 
 | 1877 |  | 
 | 1878 | 	default: | 
 | 1879 | 		SMSC_WARNING(PROBE, "LAN911x not identified, idrev: 0x%08X", | 
 | 1880 | 			pdata->idrev); | 
 | 1881 | 		return -ENODEV; | 
 | 1882 | 	} | 
 | 1883 |  | 
 | 1884 | 	SMSC_TRACE(PROBE, "LAN911x identified, idrev: 0x%08X, generation: %d", | 
 | 1885 | 		pdata->idrev, pdata->generation); | 
 | 1886 |  | 
 | 1887 | 	if (pdata->generation == 0) | 
 | 1888 | 		SMSC_WARNING(PROBE, | 
 | 1889 | 			"This driver is not intended for this chip revision"); | 
 | 1890 |  | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1891 | 	/* workaround for platforms without an eeprom, where the mac address | 
 | 1892 | 	 * is stored elsewhere and set by the bootloader.  This saves the | 
 | 1893 | 	 * mac address before resetting the device */ | 
 | 1894 | 	if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) | 
 | 1895 | 		smsc911x_read_mac_address(dev); | 
 | 1896 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1897 | 	/* Reset the LAN911x */ | 
 | 1898 | 	if (smsc911x_soft_reset(pdata)) | 
 | 1899 | 		return -ENODEV; | 
 | 1900 |  | 
 | 1901 | 	/* Disable all interrupt sources until we bring the device up */ | 
 | 1902 | 	smsc911x_reg_write(pdata, INT_EN, 0); | 
 | 1903 |  | 
 | 1904 | 	ether_setup(dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1905 | 	dev->flags |= IFF_MULTICAST; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1906 | 	netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1907 | 	dev->netdev_ops = &smsc911x_netdev_ops; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1908 | 	dev->ethtool_ops = &smsc911x_ethtool_ops; | 
 | 1909 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1910 | 	return 0; | 
 | 1911 | } | 
 | 1912 |  | 
 | 1913 | static int __devexit smsc911x_drv_remove(struct platform_device *pdev) | 
 | 1914 | { | 
 | 1915 | 	struct net_device *dev; | 
 | 1916 | 	struct smsc911x_data *pdata; | 
 | 1917 | 	struct resource *res; | 
 | 1918 |  | 
 | 1919 | 	dev = platform_get_drvdata(pdev); | 
 | 1920 | 	BUG_ON(!dev); | 
 | 1921 | 	pdata = netdev_priv(dev); | 
 | 1922 | 	BUG_ON(!pdata); | 
 | 1923 | 	BUG_ON(!pdata->ioaddr); | 
 | 1924 | 	BUG_ON(!pdata->phy_dev); | 
 | 1925 |  | 
 | 1926 | 	SMSC_TRACE(IFDOWN, "Stopping driver."); | 
 | 1927 |  | 
 | 1928 | 	phy_disconnect(pdata->phy_dev); | 
 | 1929 | 	pdata->phy_dev = NULL; | 
 | 1930 | 	mdiobus_unregister(pdata->mii_bus); | 
 | 1931 | 	mdiobus_free(pdata->mii_bus); | 
 | 1932 |  | 
 | 1933 | 	platform_set_drvdata(pdev, NULL); | 
 | 1934 | 	unregister_netdev(dev); | 
 | 1935 | 	free_irq(dev->irq, dev); | 
 | 1936 | 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | 
 | 1937 | 					   "smsc911x-memory"); | 
 | 1938 | 	if (!res) | 
| Steve Glendinning | d452273 | 2008-12-25 16:44:01 -0800 | [diff] [blame] | 1939 | 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1940 |  | 
 | 1941 | 	release_mem_region(res->start, res->end - res->start); | 
 | 1942 |  | 
 | 1943 | 	iounmap(pdata->ioaddr); | 
 | 1944 |  | 
 | 1945 | 	free_netdev(dev); | 
 | 1946 |  | 
 | 1947 | 	return 0; | 
 | 1948 | } | 
 | 1949 |  | 
 | 1950 | static int __devinit smsc911x_drv_probe(struct platform_device *pdev) | 
 | 1951 | { | 
 | 1952 | 	struct net_device *dev; | 
 | 1953 | 	struct smsc911x_data *pdata; | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1954 | 	struct smsc911x_platform_config *config = pdev->dev.platform_data; | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1955 | 	struct resource *res, *irq_res; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1956 | 	unsigned int intcfg = 0; | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1957 | 	int res_size, irq_flags; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1958 | 	int retval; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1959 |  | 
 | 1960 | 	pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME, SMSC_DRV_VERSION); | 
 | 1961 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1962 | 	/* platform data specifies irq & dynamic bus configuration */ | 
 | 1963 | 	if (!pdev->dev.platform_data) { | 
 | 1964 | 		pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME); | 
 | 1965 | 		retval = -ENODEV; | 
 | 1966 | 		goto out_0; | 
 | 1967 | 	} | 
 | 1968 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1969 | 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | 
 | 1970 | 					   "smsc911x-memory"); | 
 | 1971 | 	if (!res) | 
 | 1972 | 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 1973 | 	if (!res) { | 
 | 1974 | 		pr_warning("%s: Could not allocate resource.\n", | 
 | 1975 | 			SMSC_CHIPNAME); | 
 | 1976 | 		retval = -ENODEV; | 
 | 1977 | 		goto out_0; | 
 | 1978 | 	} | 
| Matthias Ludwig | 928f308 | 2009-05-07 15:00:12 -0700 | [diff] [blame] | 1979 | 	res_size = res->end - res->start + 1; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1980 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1981 | 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
 | 1982 | 	if (!irq_res) { | 
 | 1983 | 		pr_warning("%s: Could not allocate irq resource.\n", | 
 | 1984 | 			SMSC_CHIPNAME); | 
 | 1985 | 		retval = -ENODEV; | 
 | 1986 | 		goto out_0; | 
 | 1987 | 	} | 
 | 1988 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1989 | 	if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { | 
 | 1990 | 		retval = -EBUSY; | 
 | 1991 | 		goto out_0; | 
 | 1992 | 	} | 
 | 1993 |  | 
 | 1994 | 	dev = alloc_etherdev(sizeof(struct smsc911x_data)); | 
 | 1995 | 	if (!dev) { | 
 | 1996 | 		pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME); | 
 | 1997 | 		retval = -ENOMEM; | 
 | 1998 | 		goto out_release_io_1; | 
 | 1999 | 	} | 
 | 2000 |  | 
 | 2001 | 	SET_NETDEV_DEV(dev, &pdev->dev); | 
 | 2002 |  | 
 | 2003 | 	pdata = netdev_priv(dev); | 
 | 2004 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 2005 | 	dev->irq = irq_res->start; | 
 | 2006 | 	irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2007 | 	pdata->ioaddr = ioremap_nocache(res->start, res_size); | 
 | 2008 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2009 | 	/* copy config parameters across to pdata */ | 
 | 2010 | 	memcpy(&pdata->config, config, sizeof(pdata->config)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2011 |  | 
 | 2012 | 	pdata->dev = dev; | 
 | 2013 | 	pdata->msg_enable = ((1 << debug) - 1); | 
 | 2014 |  | 
 | 2015 | 	if (pdata->ioaddr == NULL) { | 
 | 2016 | 		SMSC_WARNING(PROBE, | 
 | 2017 | 			"Error smsc911x base address invalid"); | 
 | 2018 | 		retval = -ENOMEM; | 
 | 2019 | 		goto out_free_netdev_2; | 
 | 2020 | 	} | 
 | 2021 |  | 
 | 2022 | 	retval = smsc911x_init(dev); | 
 | 2023 | 	if (retval < 0) | 
 | 2024 | 		goto out_unmap_io_3; | 
 | 2025 |  | 
 | 2026 | 	/* configure irq polarity and type before connecting isr */ | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2027 | 	if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2028 | 		intcfg |= INT_CFG_IRQ_POL_; | 
 | 2029 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2030 | 	if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2031 | 		intcfg |= INT_CFG_IRQ_TYPE_; | 
 | 2032 |  | 
 | 2033 | 	smsc911x_reg_write(pdata, INT_CFG, intcfg); | 
 | 2034 |  | 
 | 2035 | 	/* Ensure interrupts are globally disabled before connecting ISR */ | 
 | 2036 | 	smsc911x_reg_write(pdata, INT_EN, 0); | 
 | 2037 | 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); | 
 | 2038 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 2039 | 	retval = request_irq(dev->irq, smsc911x_irqhandler, | 
| Steve Glendinning | e81259b | 2009-01-27 06:51:10 +0000 | [diff] [blame] | 2040 | 			     irq_flags | IRQF_SHARED, dev->name, dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2041 | 	if (retval) { | 
 | 2042 | 		SMSC_WARNING(PROBE, | 
 | 2043 | 			"Unable to claim requested irq: %d", dev->irq); | 
 | 2044 | 		goto out_unmap_io_3; | 
 | 2045 | 	} | 
 | 2046 |  | 
 | 2047 | 	platform_set_drvdata(pdev, dev); | 
 | 2048 |  | 
 | 2049 | 	retval = register_netdev(dev); | 
 | 2050 | 	if (retval) { | 
 | 2051 | 		SMSC_WARNING(PROBE, | 
 | 2052 | 			"Error %i registering device", retval); | 
 | 2053 | 		goto out_unset_drvdata_4; | 
 | 2054 | 	} else { | 
 | 2055 | 		SMSC_TRACE(PROBE, "Network interface: \"%s\"", dev->name); | 
 | 2056 | 	} | 
 | 2057 |  | 
 | 2058 | 	spin_lock_init(&pdata->mac_lock); | 
 | 2059 |  | 
 | 2060 | 	retval = smsc911x_mii_init(pdev, dev); | 
 | 2061 | 	if (retval) { | 
 | 2062 | 		SMSC_WARNING(PROBE, | 
 | 2063 | 			"Error %i initialising mii", retval); | 
 | 2064 | 		goto out_unregister_netdev_5; | 
 | 2065 | 	} | 
 | 2066 |  | 
 | 2067 | 	spin_lock_irq(&pdata->mac_lock); | 
 | 2068 |  | 
 | 2069 | 	/* Check if mac address has been specified when bringing interface up */ | 
 | 2070 | 	if (is_valid_ether_addr(dev->dev_addr)) { | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2071 | 		smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2072 | 		SMSC_TRACE(PROBE, "MAC Address is specified by configuration"); | 
 | 2073 | 	} else { | 
 | 2074 | 		/* Try reading mac address from device. if EEPROM is present | 
 | 2075 | 		 * it will already have been set */ | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 2076 | 		smsc911x_read_mac_address(dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2077 |  | 
 | 2078 | 		if (is_valid_ether_addr(dev->dev_addr)) { | 
 | 2079 | 			/* eeprom values are valid  so use them */ | 
 | 2080 | 			SMSC_TRACE(PROBE, | 
 | 2081 | 				"Mac Address is read from LAN911x EEPROM"); | 
 | 2082 | 		} else { | 
 | 2083 | 			/* eeprom values are invalid, generate random MAC */ | 
 | 2084 | 			random_ether_addr(dev->dev_addr); | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2085 | 			smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2086 | 			SMSC_TRACE(PROBE, | 
 | 2087 | 				"MAC Address is set to random_ether_addr"); | 
 | 2088 | 		} | 
 | 2089 | 	} | 
 | 2090 |  | 
 | 2091 | 	spin_unlock_irq(&pdata->mac_lock); | 
 | 2092 |  | 
| Steve Glendinning | 63a2ebb | 2009-03-19 00:24:45 +0000 | [diff] [blame] | 2093 | 	dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2094 |  | 
 | 2095 | 	return 0; | 
 | 2096 |  | 
 | 2097 | out_unregister_netdev_5: | 
 | 2098 | 	unregister_netdev(dev); | 
 | 2099 | out_unset_drvdata_4: | 
 | 2100 | 	platform_set_drvdata(pdev, NULL); | 
 | 2101 | 	free_irq(dev->irq, dev); | 
 | 2102 | out_unmap_io_3: | 
 | 2103 | 	iounmap(pdata->ioaddr); | 
 | 2104 | out_free_netdev_2: | 
 | 2105 | 	free_netdev(dev); | 
 | 2106 | out_release_io_1: | 
 | 2107 | 	release_mem_region(res->start, res->end - res->start); | 
 | 2108 | out_0: | 
 | 2109 | 	return retval; | 
 | 2110 | } | 
 | 2111 |  | 
| Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2112 | #ifdef CONFIG_PM | 
 | 2113 | /* This implementation assumes the devices remains powered on its VDDVARIO | 
 | 2114 |  * pins during suspend. */ | 
 | 2115 |  | 
 | 2116 | static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state) | 
 | 2117 | { | 
 | 2118 | 	struct net_device *dev = platform_get_drvdata(pdev); | 
 | 2119 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 2120 |  | 
 | 2121 | 	/* enable wake on LAN, energy detection and the external PME | 
 | 2122 | 	 * signal. */ | 
 | 2123 | 	smsc911x_reg_write(pdata, PMT_CTRL, | 
 | 2124 | 		PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | | 
 | 2125 | 		PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); | 
 | 2126 |  | 
 | 2127 | 	return 0; | 
 | 2128 | } | 
 | 2129 |  | 
 | 2130 | static int smsc911x_resume(struct platform_device *pdev) | 
 | 2131 | { | 
 | 2132 | 	struct net_device *dev = platform_get_drvdata(pdev); | 
 | 2133 | 	struct smsc911x_data *pdata = netdev_priv(dev); | 
 | 2134 | 	unsigned int to = 100; | 
 | 2135 |  | 
 | 2136 | 	/* Note 3.11 from the datasheet: | 
 | 2137 | 	 * 	"When the LAN9220 is in a power saving state, a write of any | 
 | 2138 | 	 * 	 data to the BYTE_TEST register will wake-up the device." | 
 | 2139 | 	 */ | 
 | 2140 | 	smsc911x_reg_write(pdata, BYTE_TEST, 0); | 
 | 2141 |  | 
 | 2142 | 	/* poll the READY bit in PMT_CTRL. Any other access to the device is | 
 | 2143 | 	 * forbidden while this bit isn't set. Try for 100ms and return -EIO | 
 | 2144 | 	 * if it failed. */ | 
 | 2145 | 	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) | 
 | 2146 | 		udelay(1000); | 
 | 2147 |  | 
 | 2148 | 	return (to == 0) ? -EIO : 0; | 
 | 2149 | } | 
 | 2150 |  | 
 | 2151 | #else | 
 | 2152 | #define smsc911x_suspend	NULL | 
 | 2153 | #define smsc911x_resume		NULL | 
 | 2154 | #endif | 
 | 2155 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2156 | static struct platform_driver smsc911x_driver = { | 
 | 2157 | 	.probe = smsc911x_drv_probe, | 
| Mike Frysinger | df911e2 | 2009-06-05 14:37:20 +0000 | [diff] [blame] | 2158 | 	.remove = __devexit_p(smsc911x_drv_remove), | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2159 | 	.driver = { | 
 | 2160 | 		.name = SMSC_CHIPNAME, | 
 | 2161 | 	}, | 
| Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2162 | 	.suspend = smsc911x_suspend, | 
 | 2163 | 	.resume = smsc911x_resume, | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2164 | }; | 
 | 2165 |  | 
 | 2166 | /* Entry point for loading the module */ | 
 | 2167 | static int __init smsc911x_init_module(void) | 
 | 2168 | { | 
 | 2169 | 	return platform_driver_register(&smsc911x_driver); | 
 | 2170 | } | 
 | 2171 |  | 
 | 2172 | /* entry point for unloading the module */ | 
 | 2173 | static void __exit smsc911x_cleanup_module(void) | 
 | 2174 | { | 
 | 2175 | 	platform_driver_unregister(&smsc911x_driver); | 
 | 2176 | } | 
 | 2177 |  | 
 | 2178 | module_init(smsc911x_init_module); | 
 | 2179 | module_exit(smsc911x_cleanup_module); |