| Imre Deak | aae76ef | 2007-05-26 19:19:19 +0530 | [diff] [blame] | 1 | /* | 
 | 2 |  * Epson HWA742 LCD controller driver | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2004-2005 Nokia Corporation | 
 | 5 |  * Authors:     Juha Yrjölä   <juha.yrjola@nokia.com> | 
 | 6 |  *	        Imre Deak     <imre.deak@nokia.com> | 
 | 7 |  * YUV support: Jussi Laako   <jussi.laako@nokia.com> | 
 | 8 |  * | 
 | 9 |  * This program is free software; you can redistribute it and/or modify it | 
 | 10 |  * under the terms of the GNU General Public License as published by the | 
 | 11 |  * Free Software Foundation; either version 2 of the License, or (at your | 
 | 12 |  * option) any later version. | 
 | 13 |  * | 
 | 14 |  * This program is distributed in the hope that it will be useful, but | 
 | 15 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 16 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 | 17 |  * General Public License for more details. | 
 | 18 |  * | 
 | 19 |  * You should have received a copy of the GNU General Public License along | 
 | 20 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 | 21 |  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 | 22 |  */ | 
 | 23 | #include <linux/module.h> | 
 | 24 | #include <linux/mm.h> | 
 | 25 | #include <linux/fb.h> | 
 | 26 | #include <linux/delay.h> | 
 | 27 | #include <linux/clk.h> | 
 | 28 |  | 
| Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 29 | #include <mach/dma.h> | 
 | 30 | #include <mach/omapfb.h> | 
 | 31 | #include <mach/hwa742.h> | 
| Imre Deak | aae76ef | 2007-05-26 19:19:19 +0530 | [diff] [blame] | 32 |  | 
 | 33 | #define HWA742_REV_CODE_REG       0x0 | 
 | 34 | #define HWA742_CONFIG_REG         0x2 | 
 | 35 | #define HWA742_PLL_DIV_REG        0x4 | 
 | 36 | #define HWA742_PLL_0_REG          0x6 | 
 | 37 | #define HWA742_PLL_1_REG          0x8 | 
 | 38 | #define HWA742_PLL_2_REG          0xa | 
 | 39 | #define HWA742_PLL_3_REG          0xc | 
 | 40 | #define HWA742_PLL_4_REG          0xe | 
 | 41 | #define HWA742_CLK_SRC_REG        0x12 | 
 | 42 | #define HWA742_PANEL_TYPE_REG     0x14 | 
 | 43 | #define HWA742_H_DISP_REG         0x16 | 
 | 44 | #define HWA742_H_NDP_REG          0x18 | 
 | 45 | #define HWA742_V_DISP_1_REG       0x1a | 
 | 46 | #define HWA742_V_DISP_2_REG       0x1c | 
 | 47 | #define HWA742_V_NDP_REG          0x1e | 
 | 48 | #define HWA742_HS_W_REG           0x20 | 
 | 49 | #define HWA742_HP_S_REG           0x22 | 
 | 50 | #define HWA742_VS_W_REG           0x24 | 
 | 51 | #define HWA742_VP_S_REG           0x26 | 
 | 52 | #define HWA742_PCLK_POL_REG       0x28 | 
 | 53 | #define HWA742_INPUT_MODE_REG     0x2a | 
 | 54 | #define HWA742_TRANSL_MODE_REG1   0x2e | 
 | 55 | #define HWA742_DISP_MODE_REG      0x34 | 
 | 56 | #define HWA742_WINDOW_TYPE        0x36 | 
 | 57 | #define HWA742_WINDOW_X_START_0   0x38 | 
 | 58 | #define HWA742_WINDOW_X_START_1   0x3a | 
 | 59 | #define HWA742_WINDOW_Y_START_0   0x3c | 
 | 60 | #define HWA742_WINDOW_Y_START_1   0x3e | 
 | 61 | #define HWA742_WINDOW_X_END_0     0x40 | 
 | 62 | #define HWA742_WINDOW_X_END_1     0x42 | 
 | 63 | #define HWA742_WINDOW_Y_END_0     0x44 | 
 | 64 | #define HWA742_WINDOW_Y_END_1     0x46 | 
 | 65 | #define HWA742_MEMORY_WRITE_LSB   0x48 | 
 | 66 | #define HWA742_MEMORY_WRITE_MSB   0x49 | 
 | 67 | #define HWA742_MEMORY_READ_0      0x4a | 
 | 68 | #define HWA742_MEMORY_READ_1      0x4c | 
 | 69 | #define HWA742_MEMORY_READ_2      0x4e | 
 | 70 | #define HWA742_POWER_SAVE         0x56 | 
 | 71 | #define HWA742_NDP_CTRL           0x58 | 
 | 72 |  | 
 | 73 | #define HWA742_AUTO_UPDATE_TIME		(HZ / 20) | 
 | 74 |  | 
 | 75 | /* Reserve 4 request slots for requests in irq context */ | 
 | 76 | #define REQ_POOL_SIZE			24 | 
 | 77 | #define IRQ_REQ_POOL_SIZE		4 | 
 | 78 |  | 
 | 79 | #define REQ_FROM_IRQ_POOL 0x01 | 
 | 80 |  | 
 | 81 | #define REQ_COMPLETE	0 | 
 | 82 | #define REQ_PENDING	1 | 
 | 83 |  | 
 | 84 | struct update_param { | 
 | 85 | 	int	x, y, width, height; | 
 | 86 | 	int	color_mode; | 
 | 87 | 	int	flags; | 
 | 88 | }; | 
 | 89 |  | 
 | 90 | struct hwa742_request { | 
 | 91 | 	struct list_head entry; | 
 | 92 | 	unsigned int	 flags; | 
 | 93 |  | 
 | 94 | 	int		 (*handler)(struct hwa742_request *req); | 
 | 95 | 	void		 (*complete)(void *data); | 
 | 96 | 	void		 *complete_data; | 
 | 97 |  | 
 | 98 | 	union { | 
 | 99 | 		struct update_param	update; | 
 | 100 | 		struct completion	*sync; | 
 | 101 | 	} par; | 
 | 102 | }; | 
 | 103 |  | 
 | 104 | struct { | 
 | 105 | 	enum omapfb_update_mode	update_mode; | 
 | 106 | 	enum omapfb_update_mode	update_mode_before_suspend; | 
 | 107 |  | 
 | 108 | 	struct timer_list	auto_update_timer; | 
 | 109 | 	int			stop_auto_update; | 
 | 110 | 	struct omapfb_update_window	auto_update_window; | 
 | 111 | 	unsigned		te_connected:1; | 
 | 112 | 	unsigned		vsync_only:1; | 
 | 113 |  | 
 | 114 | 	struct hwa742_request	req_pool[REQ_POOL_SIZE]; | 
 | 115 | 	struct list_head	pending_req_list; | 
 | 116 | 	struct list_head	free_req_list; | 
 | 117 | 	struct semaphore	req_sema; | 
 | 118 | 	spinlock_t		req_lock; | 
 | 119 |  | 
 | 120 | 	struct extif_timings	reg_timings, lut_timings; | 
 | 121 |  | 
 | 122 | 	int			prev_color_mode; | 
 | 123 | 	int			prev_flags; | 
 | 124 | 	int			window_type; | 
 | 125 |  | 
 | 126 | 	u32			max_transmit_size; | 
 | 127 | 	u32			extif_clk_period; | 
 | 128 | 	unsigned long		pix_tx_time; | 
 | 129 | 	unsigned long		line_upd_time; | 
 | 130 |  | 
 | 131 |  | 
 | 132 | 	struct omapfb_device	*fbdev; | 
 | 133 | 	struct lcd_ctrl_extif	*extif; | 
 | 134 | 	struct lcd_ctrl		*int_ctrl; | 
 | 135 |  | 
 | 136 | 	void			(*power_up)(struct device *dev); | 
 | 137 | 	void			(*power_down)(struct device *dev); | 
 | 138 | } hwa742; | 
 | 139 |  | 
 | 140 | struct lcd_ctrl hwa742_ctrl; | 
 | 141 |  | 
 | 142 | static u8 hwa742_read_reg(u8 reg) | 
 | 143 | { | 
 | 144 | 	u8 data; | 
 | 145 |  | 
 | 146 | 	hwa742.extif->set_bits_per_cycle(8); | 
 | 147 | 	hwa742.extif->write_command(®, 1); | 
 | 148 | 	hwa742.extif->read_data(&data, 1); | 
 | 149 |  | 
 | 150 | 	return data; | 
 | 151 | } | 
 | 152 |  | 
 | 153 | static void hwa742_write_reg(u8 reg, u8 data) | 
 | 154 | { | 
 | 155 | 	hwa742.extif->set_bits_per_cycle(8); | 
 | 156 | 	hwa742.extif->write_command(®, 1); | 
 | 157 | 	hwa742.extif->write_data(&data, 1); | 
 | 158 | } | 
 | 159 |  | 
 | 160 | static void set_window_regs(int x_start, int y_start, int x_end, int y_end) | 
 | 161 | { | 
 | 162 | 	u8 tmp[8]; | 
 | 163 | 	u8 cmd; | 
 | 164 |  | 
 | 165 | 	x_end--; | 
 | 166 | 	y_end--; | 
 | 167 | 	tmp[0] = x_start; | 
 | 168 | 	tmp[1] = x_start >> 8; | 
 | 169 | 	tmp[2] = y_start; | 
 | 170 | 	tmp[3] = y_start >> 8; | 
 | 171 | 	tmp[4] = x_end; | 
 | 172 | 	tmp[5] = x_end >> 8; | 
 | 173 | 	tmp[6] = y_end; | 
 | 174 | 	tmp[7] = y_end >> 8; | 
 | 175 |  | 
 | 176 | 	hwa742.extif->set_bits_per_cycle(8); | 
 | 177 | 	cmd = HWA742_WINDOW_X_START_0; | 
 | 178 |  | 
 | 179 | 	hwa742.extif->write_command(&cmd, 1); | 
 | 180 |  | 
 | 181 | 	hwa742.extif->write_data(tmp, 8); | 
 | 182 | } | 
 | 183 |  | 
 | 184 | static void set_format_regs(int conv, int transl, int flags) | 
 | 185 | { | 
 | 186 | 	if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) { | 
 | 187 | 		hwa742.window_type = ((hwa742.window_type & 0xfc) | 0x01); | 
 | 188 | #ifdef VERBOSE | 
 | 189 | 		dev_dbg(hwa742.fbdev->dev, "hwa742: enabled pixel doubling\n"); | 
 | 190 | #endif | 
 | 191 | 	} else { | 
 | 192 | 		hwa742.window_type = (hwa742.window_type & 0xfc); | 
 | 193 | #ifdef VERBOSE | 
 | 194 | 		dev_dbg(hwa742.fbdev->dev, "hwa742: disabled pixel doubling\n"); | 
 | 195 | #endif | 
 | 196 | 	} | 
 | 197 |  | 
 | 198 | 	hwa742_write_reg(HWA742_INPUT_MODE_REG, conv); | 
 | 199 | 	hwa742_write_reg(HWA742_TRANSL_MODE_REG1, transl); | 
 | 200 | 	hwa742_write_reg(HWA742_WINDOW_TYPE, hwa742.window_type); | 
 | 201 | } | 
 | 202 |  | 
 | 203 | static void enable_tearsync(int y, int width, int height, int screen_height, | 
 | 204 | 			    int force_vsync) | 
 | 205 | { | 
 | 206 | 	u8 b; | 
 | 207 |  | 
 | 208 | 	b = hwa742_read_reg(HWA742_NDP_CTRL); | 
 | 209 | 	b |= 1 << 2; | 
 | 210 | 	hwa742_write_reg(HWA742_NDP_CTRL, b); | 
 | 211 |  | 
 | 212 | 	if (likely(hwa742.vsync_only || force_vsync)) { | 
 | 213 | 		hwa742.extif->enable_tearsync(1, 0); | 
 | 214 | 		return; | 
 | 215 | 	} | 
 | 216 |  | 
 | 217 | 	if (width * hwa742.pix_tx_time < hwa742.line_upd_time) { | 
 | 218 | 		hwa742.extif->enable_tearsync(1, 0); | 
 | 219 | 		return; | 
 | 220 | 	} | 
 | 221 |  | 
 | 222 | 	if ((width * hwa742.pix_tx_time / 1000) * height < | 
 | 223 | 	    (y + height) * (hwa742.line_upd_time / 1000)) { | 
 | 224 | 		hwa742.extif->enable_tearsync(1, 0); | 
 | 225 | 		return; | 
 | 226 | 	} | 
 | 227 |  | 
 | 228 | 	hwa742.extif->enable_tearsync(1, y + 1); | 
 | 229 | } | 
 | 230 |  | 
 | 231 | static void disable_tearsync(void) | 
 | 232 | { | 
 | 233 | 	u8 b; | 
 | 234 |  | 
 | 235 | 	hwa742.extif->enable_tearsync(0, 0); | 
 | 236 |  | 
 | 237 | 	b = hwa742_read_reg(HWA742_NDP_CTRL); | 
 | 238 | 	b &= ~(1 << 2); | 
 | 239 | 	hwa742_write_reg(HWA742_NDP_CTRL, b); | 
 | 240 | } | 
 | 241 |  | 
 | 242 | static inline struct hwa742_request *alloc_req(void) | 
 | 243 | { | 
 | 244 | 	unsigned long flags; | 
 | 245 | 	struct hwa742_request *req; | 
 | 246 | 	int req_flags = 0; | 
 | 247 |  | 
 | 248 | 	if (!in_interrupt()) | 
 | 249 | 		down(&hwa742.req_sema); | 
 | 250 | 	else | 
 | 251 | 		req_flags = REQ_FROM_IRQ_POOL; | 
 | 252 |  | 
 | 253 | 	spin_lock_irqsave(&hwa742.req_lock, flags); | 
 | 254 | 	BUG_ON(list_empty(&hwa742.free_req_list)); | 
 | 255 | 	req = list_entry(hwa742.free_req_list.next, | 
 | 256 | 			 struct hwa742_request, entry); | 
 | 257 | 	list_del(&req->entry); | 
 | 258 | 	spin_unlock_irqrestore(&hwa742.req_lock, flags); | 
 | 259 |  | 
 | 260 | 	INIT_LIST_HEAD(&req->entry); | 
 | 261 | 	req->flags = req_flags; | 
 | 262 |  | 
 | 263 | 	return req; | 
 | 264 | } | 
 | 265 |  | 
 | 266 | static inline void free_req(struct hwa742_request *req) | 
 | 267 | { | 
 | 268 | 	unsigned long flags; | 
 | 269 |  | 
 | 270 | 	spin_lock_irqsave(&hwa742.req_lock, flags); | 
 | 271 |  | 
 | 272 | 	list_del(&req->entry); | 
 | 273 | 	list_add(&req->entry, &hwa742.free_req_list); | 
 | 274 | 	if (!(req->flags & REQ_FROM_IRQ_POOL)) | 
 | 275 | 		up(&hwa742.req_sema); | 
 | 276 |  | 
 | 277 | 	spin_unlock_irqrestore(&hwa742.req_lock, flags); | 
 | 278 | } | 
 | 279 |  | 
 | 280 | static void process_pending_requests(void) | 
 | 281 | { | 
 | 282 | 	unsigned long flags; | 
 | 283 |  | 
 | 284 | 	spin_lock_irqsave(&hwa742.req_lock, flags); | 
 | 285 |  | 
 | 286 | 	while (!list_empty(&hwa742.pending_req_list)) { | 
 | 287 | 		struct hwa742_request *req; | 
 | 288 | 		void (*complete)(void *); | 
 | 289 | 		void *complete_data; | 
 | 290 |  | 
 | 291 | 		req = list_entry(hwa742.pending_req_list.next, | 
 | 292 | 				 struct hwa742_request, entry); | 
 | 293 | 		spin_unlock_irqrestore(&hwa742.req_lock, flags); | 
 | 294 |  | 
 | 295 | 		if (req->handler(req) == REQ_PENDING) | 
 | 296 | 			return; | 
 | 297 |  | 
 | 298 | 		complete = req->complete; | 
 | 299 | 		complete_data = req->complete_data; | 
 | 300 | 		free_req(req); | 
 | 301 |  | 
 | 302 | 		if (complete) | 
 | 303 | 			complete(complete_data); | 
 | 304 |  | 
 | 305 | 		spin_lock_irqsave(&hwa742.req_lock, flags); | 
 | 306 | 	} | 
 | 307 |  | 
 | 308 | 	spin_unlock_irqrestore(&hwa742.req_lock, flags); | 
 | 309 | } | 
 | 310 |  | 
 | 311 | static void submit_req_list(struct list_head *head) | 
 | 312 | { | 
 | 313 | 	unsigned long flags; | 
 | 314 | 	int process = 1; | 
 | 315 |  | 
 | 316 | 	spin_lock_irqsave(&hwa742.req_lock, flags); | 
 | 317 | 	if (likely(!list_empty(&hwa742.pending_req_list))) | 
 | 318 | 		process = 0; | 
 | 319 | 	list_splice_init(head, hwa742.pending_req_list.prev); | 
 | 320 | 	spin_unlock_irqrestore(&hwa742.req_lock, flags); | 
 | 321 |  | 
 | 322 | 	if (process) | 
 | 323 | 		process_pending_requests(); | 
 | 324 | } | 
 | 325 |  | 
 | 326 | static void request_complete(void *data) | 
 | 327 | { | 
 | 328 | 	struct hwa742_request	*req = (struct hwa742_request *)data; | 
 | 329 | 	void			(*complete)(void *); | 
 | 330 | 	void			*complete_data; | 
 | 331 |  | 
 | 332 | 	complete = req->complete; | 
 | 333 | 	complete_data = req->complete_data; | 
 | 334 |  | 
 | 335 | 	free_req(req); | 
 | 336 |  | 
 | 337 | 	if (complete) | 
 | 338 | 		complete(complete_data); | 
 | 339 |  | 
 | 340 | 	process_pending_requests(); | 
 | 341 | } | 
 | 342 |  | 
 | 343 | static int send_frame_handler(struct hwa742_request *req) | 
 | 344 | { | 
 | 345 | 	struct update_param *par = &req->par.update; | 
 | 346 | 	int x = par->x; | 
 | 347 | 	int y = par->y; | 
 | 348 | 	int w = par->width; | 
 | 349 | 	int h = par->height; | 
 | 350 | 	int bpp; | 
 | 351 | 	int conv, transl; | 
 | 352 | 	unsigned long offset; | 
 | 353 | 	int color_mode = par->color_mode; | 
 | 354 | 	int flags = par->flags; | 
 | 355 | 	int scr_width = hwa742.fbdev->panel->x_res; | 
 | 356 | 	int scr_height = hwa742.fbdev->panel->y_res; | 
 | 357 |  | 
 | 358 | #ifdef VERBOSE | 
 | 359 | 	dev_dbg(hwa742.fbdev->dev, "x %d y %d w %d h %d scr_width %d " | 
 | 360 | 		"color_mode %d flags %d\n", | 
 | 361 | 		x, y, w, h, scr_width, color_mode, flags); | 
 | 362 | #endif | 
 | 363 |  | 
 | 364 | 	switch (color_mode) { | 
 | 365 | 	case OMAPFB_COLOR_YUV422: | 
 | 366 | 		bpp = 16; | 
 | 367 | 		conv = 0x08; | 
 | 368 | 		transl = 0x25; | 
 | 369 | 		break; | 
 | 370 | 	case OMAPFB_COLOR_YUV420: | 
 | 371 | 		bpp = 12; | 
 | 372 | 		conv = 0x09; | 
 | 373 | 		transl = 0x25; | 
 | 374 | 		break; | 
 | 375 | 	case OMAPFB_COLOR_RGB565: | 
 | 376 | 		bpp = 16; | 
 | 377 | 		conv = 0x01; | 
 | 378 | 		transl = 0x05; | 
 | 379 | 		break; | 
 | 380 | 	default: | 
 | 381 | 		return -EINVAL; | 
 | 382 | 	} | 
 | 383 |  | 
 | 384 | 	if (hwa742.prev_flags != flags || | 
 | 385 | 	    hwa742.prev_color_mode != color_mode) { | 
 | 386 | 		set_format_regs(conv, transl, flags); | 
 | 387 | 		hwa742.prev_color_mode = color_mode; | 
 | 388 | 		hwa742.prev_flags = flags; | 
 | 389 | 	} | 
 | 390 | 	flags = req->par.update.flags; | 
 | 391 | 	if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC) | 
 | 392 | 		enable_tearsync(y, scr_width, h, scr_height, | 
 | 393 | 				flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC); | 
 | 394 | 	else | 
 | 395 | 		disable_tearsync(); | 
 | 396 |  | 
 | 397 | 	set_window_regs(x, y, x + w, y + h); | 
 | 398 |  | 
 | 399 | 	offset = (scr_width * y + x) * bpp / 8; | 
 | 400 |  | 
 | 401 | 	hwa742.int_ctrl->setup_plane(OMAPFB_PLANE_GFX, | 
 | 402 | 			OMAPFB_CHANNEL_OUT_LCD, offset, scr_width, 0, 0, w, h, | 
 | 403 | 			color_mode); | 
 | 404 |  | 
 | 405 | 	hwa742.extif->set_bits_per_cycle(16); | 
 | 406 |  | 
 | 407 | 	hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 1); | 
 | 408 | 	hwa742.extif->transfer_area(w, h, request_complete, req); | 
 | 409 |  | 
 | 410 | 	return REQ_PENDING; | 
 | 411 | } | 
 | 412 |  | 
 | 413 | static void send_frame_complete(void *data) | 
 | 414 | { | 
 | 415 | 	hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 0); | 
 | 416 | } | 
 | 417 |  | 
 | 418 | #define ADD_PREQ(_x, _y, _w, _h) do {		\ | 
 | 419 | 	req = alloc_req();			\ | 
 | 420 | 	req->handler	= send_frame_handler;	\ | 
 | 421 | 	req->complete	= send_frame_complete;	\ | 
 | 422 | 	req->par.update.x = _x;			\ | 
 | 423 | 	req->par.update.y = _y;			\ | 
 | 424 | 	req->par.update.width  = _w;		\ | 
 | 425 | 	req->par.update.height = _h;		\ | 
 | 426 | 	req->par.update.color_mode = color_mode;\ | 
 | 427 | 	req->par.update.flags	  = flags;	\ | 
 | 428 | 	list_add_tail(&req->entry, req_head);	\ | 
 | 429 | } while(0) | 
 | 430 |  | 
 | 431 | static void create_req_list(struct omapfb_update_window *win, | 
 | 432 | 			    struct list_head *req_head) | 
 | 433 | { | 
 | 434 | 	struct hwa742_request *req; | 
 | 435 | 	int x = win->x; | 
 | 436 | 	int y = win->y; | 
 | 437 | 	int width = win->width; | 
 | 438 | 	int height = win->height; | 
 | 439 | 	int color_mode; | 
 | 440 | 	int flags; | 
 | 441 |  | 
 | 442 | 	flags = win->format & ~OMAPFB_FORMAT_MASK; | 
 | 443 | 	color_mode = win->format & OMAPFB_FORMAT_MASK; | 
 | 444 |  | 
 | 445 | 	if (x & 1) { | 
 | 446 | 		ADD_PREQ(x, y, 1, height); | 
 | 447 | 		width--; | 
 | 448 | 		x++; | 
 | 449 | 		flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; | 
 | 450 | 	} | 
 | 451 | 	if (width & ~1) { | 
 | 452 | 		unsigned int xspan = width & ~1; | 
 | 453 | 		unsigned int ystart = y; | 
 | 454 | 		unsigned int yspan = height; | 
 | 455 |  | 
 | 456 | 		if (xspan * height * 2 > hwa742.max_transmit_size) { | 
 | 457 | 			yspan = hwa742.max_transmit_size / (xspan * 2); | 
 | 458 | 			ADD_PREQ(x, ystart, xspan, yspan); | 
 | 459 | 			ystart += yspan; | 
 | 460 | 			yspan = height - yspan; | 
 | 461 | 			flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; | 
 | 462 | 		} | 
 | 463 |  | 
 | 464 | 		ADD_PREQ(x, ystart, xspan, yspan); | 
 | 465 | 		x += xspan; | 
 | 466 | 		width -= xspan; | 
 | 467 | 		flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; | 
 | 468 | 	} | 
 | 469 | 	if (width) | 
 | 470 | 		ADD_PREQ(x, y, 1, height); | 
 | 471 | } | 
 | 472 |  | 
 | 473 | static void auto_update_complete(void *data) | 
 | 474 | { | 
 | 475 | 	if (!hwa742.stop_auto_update) | 
 | 476 | 		mod_timer(&hwa742.auto_update_timer, | 
 | 477 | 			  jiffies + HWA742_AUTO_UPDATE_TIME); | 
 | 478 | } | 
 | 479 |  | 
 | 480 | static void hwa742_update_window_auto(unsigned long arg) | 
 | 481 | { | 
 | 482 | 	LIST_HEAD(req_list); | 
 | 483 | 	struct hwa742_request *last; | 
 | 484 |  | 
 | 485 | 	create_req_list(&hwa742.auto_update_window, &req_list); | 
 | 486 | 	last = list_entry(req_list.prev, struct hwa742_request, entry); | 
 | 487 |  | 
 | 488 | 	last->complete = auto_update_complete; | 
 | 489 | 	last->complete_data = NULL; | 
 | 490 |  | 
 | 491 | 	submit_req_list(&req_list); | 
 | 492 | } | 
 | 493 |  | 
 | 494 | int hwa742_update_window_async(struct fb_info *fbi, | 
 | 495 | 				 struct omapfb_update_window *win, | 
 | 496 | 				 void (*complete_callback)(void *arg), | 
 | 497 | 				 void *complete_callback_data) | 
 | 498 | { | 
 | 499 | 	LIST_HEAD(req_list); | 
 | 500 | 	struct hwa742_request *last; | 
 | 501 | 	int r = 0; | 
 | 502 |  | 
 | 503 | 	if (hwa742.update_mode != OMAPFB_MANUAL_UPDATE) { | 
 | 504 | 		dev_dbg(hwa742.fbdev->dev, "invalid update mode\n"); | 
 | 505 | 		r = -EINVAL; | 
 | 506 | 		goto out; | 
 | 507 | 	} | 
 | 508 | 	if (unlikely(win->format & | 
 | 509 | 	    ~(0x03 | OMAPFB_FORMAT_FLAG_DOUBLE | | 
 | 510 | 	    OMAPFB_FORMAT_FLAG_TEARSYNC | OMAPFB_FORMAT_FLAG_FORCE_VSYNC))) { | 
| Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 511 | 		dev_dbg(hwa742.fbdev->dev, "invalid window flag\n"); | 
| Imre Deak | aae76ef | 2007-05-26 19:19:19 +0530 | [diff] [blame] | 512 | 		r = -EINVAL; | 
 | 513 | 		goto out; | 
 | 514 | 	} | 
 | 515 |  | 
 | 516 | 	create_req_list(win, &req_list); | 
 | 517 | 	last = list_entry(req_list.prev, struct hwa742_request, entry); | 
 | 518 |  | 
 | 519 | 	last->complete = complete_callback; | 
 | 520 | 	last->complete_data = (void *)complete_callback_data; | 
 | 521 |  | 
 | 522 | 	submit_req_list(&req_list); | 
 | 523 |  | 
 | 524 | out: | 
 | 525 | 	return r; | 
 | 526 | } | 
 | 527 | EXPORT_SYMBOL(hwa742_update_window_async); | 
 | 528 |  | 
 | 529 | static int hwa742_setup_plane(int plane, int channel_out, | 
 | 530 | 				  unsigned long offset, int screen_width, | 
 | 531 | 				  int pos_x, int pos_y, int width, int height, | 
 | 532 | 				  int color_mode) | 
 | 533 | { | 
 | 534 | 	if (plane != OMAPFB_PLANE_GFX || | 
 | 535 | 	    channel_out != OMAPFB_CHANNEL_OUT_LCD) | 
 | 536 | 		return -EINVAL; | 
 | 537 |  | 
 | 538 | 	return 0; | 
 | 539 | } | 
 | 540 |  | 
 | 541 | static int hwa742_enable_plane(int plane, int enable) | 
 | 542 | { | 
 | 543 | 	if (plane != 0) | 
 | 544 | 		return -EINVAL; | 
 | 545 |  | 
 | 546 | 	hwa742.int_ctrl->enable_plane(plane, enable); | 
 | 547 |  | 
 | 548 | 	return 0; | 
 | 549 | } | 
 | 550 |  | 
 | 551 | static int sync_handler(struct hwa742_request *req) | 
 | 552 | { | 
 | 553 | 	complete(req->par.sync); | 
 | 554 | 	return REQ_COMPLETE; | 
 | 555 | } | 
 | 556 |  | 
 | 557 | static void hwa742_sync(void) | 
 | 558 | { | 
 | 559 | 	LIST_HEAD(req_list); | 
 | 560 | 	struct hwa742_request *req; | 
 | 561 | 	struct completion comp; | 
 | 562 |  | 
 | 563 | 	req = alloc_req(); | 
 | 564 |  | 
 | 565 | 	req->handler = sync_handler; | 
 | 566 | 	req->complete = NULL; | 
 | 567 | 	init_completion(&comp); | 
 | 568 | 	req->par.sync = ∁ | 
 | 569 |  | 
 | 570 | 	list_add(&req->entry, &req_list); | 
 | 571 | 	submit_req_list(&req_list); | 
 | 572 |  | 
 | 573 | 	wait_for_completion(&comp); | 
 | 574 | } | 
 | 575 |  | 
 | 576 | static void hwa742_bind_client(struct omapfb_notifier_block *nb) | 
 | 577 | { | 
 | 578 | 	dev_dbg(hwa742.fbdev->dev, "update_mode %d\n", hwa742.update_mode); | 
 | 579 | 	if (hwa742.update_mode == OMAPFB_MANUAL_UPDATE) { | 
 | 580 | 		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY); | 
 | 581 | 	} | 
 | 582 | } | 
 | 583 |  | 
 | 584 | static int hwa742_set_update_mode(enum omapfb_update_mode mode) | 
 | 585 | { | 
 | 586 | 	if (mode != OMAPFB_MANUAL_UPDATE && mode != OMAPFB_AUTO_UPDATE && | 
 | 587 | 	    mode != OMAPFB_UPDATE_DISABLED) | 
 | 588 | 		return -EINVAL; | 
 | 589 |  | 
 | 590 | 	if (mode == hwa742.update_mode) | 
 | 591 | 		return 0; | 
 | 592 |  | 
 | 593 | 	dev_info(hwa742.fbdev->dev, "HWA742: setting update mode to %s\n", | 
 | 594 | 			mode == OMAPFB_UPDATE_DISABLED ? "disabled" : | 
 | 595 | 			(mode == OMAPFB_AUTO_UPDATE ? "auto" : "manual")); | 
 | 596 |  | 
 | 597 | 	switch (hwa742.update_mode) { | 
 | 598 | 	case OMAPFB_MANUAL_UPDATE: | 
 | 599 | 		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_DISABLED); | 
 | 600 | 		break; | 
 | 601 | 	case OMAPFB_AUTO_UPDATE: | 
 | 602 | 		hwa742.stop_auto_update = 1; | 
 | 603 | 		del_timer_sync(&hwa742.auto_update_timer); | 
 | 604 | 		break; | 
 | 605 | 	case OMAPFB_UPDATE_DISABLED: | 
 | 606 | 		break; | 
 | 607 | 	} | 
 | 608 |  | 
 | 609 | 	hwa742.update_mode = mode; | 
 | 610 | 	hwa742_sync(); | 
 | 611 | 	hwa742.stop_auto_update = 0; | 
 | 612 |  | 
 | 613 | 	switch (mode) { | 
 | 614 | 	case OMAPFB_MANUAL_UPDATE: | 
 | 615 | 		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY); | 
 | 616 | 		break; | 
 | 617 | 	case OMAPFB_AUTO_UPDATE: | 
 | 618 | 		hwa742_update_window_auto(0); | 
 | 619 | 		break; | 
 | 620 | 	case OMAPFB_UPDATE_DISABLED: | 
 | 621 | 		break; | 
 | 622 | 	} | 
 | 623 |  | 
 | 624 | 	return 0; | 
 | 625 | } | 
 | 626 |  | 
 | 627 | static enum omapfb_update_mode hwa742_get_update_mode(void) | 
 | 628 | { | 
 | 629 | 	return hwa742.update_mode; | 
 | 630 | } | 
 | 631 |  | 
 | 632 | static unsigned long round_to_extif_ticks(unsigned long ps, int div) | 
 | 633 | { | 
 | 634 | 	int bus_tick = hwa742.extif_clk_period * div; | 
 | 635 | 	return (ps + bus_tick - 1) / bus_tick * bus_tick; | 
 | 636 | } | 
 | 637 |  | 
 | 638 | static int calc_reg_timing(unsigned long sysclk, int div) | 
 | 639 | { | 
 | 640 | 	struct extif_timings *t; | 
 | 641 | 	unsigned long systim; | 
 | 642 |  | 
 | 643 | 	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns, | 
 | 644 | 	 * AccessTime 2 ns + 12.2 ns (regs), | 
 | 645 | 	 * WEOffTime = WEOnTime + 1 ns, | 
 | 646 | 	 * REOffTime = REOnTime + 16 ns (regs), | 
 | 647 | 	 * CSOffTime = REOffTime + 1 ns | 
 | 648 | 	 * ReadCycle = 2ns + 2*SYSCLK  (regs), | 
 | 649 | 	 * WriteCycle = 2*SYSCLK + 2 ns, | 
 | 650 | 	 * CSPulseWidth = 10 ns */ | 
 | 651 | 	systim = 1000000000 / (sysclk / 1000); | 
 | 652 | 	dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps" | 
 | 653 | 		  "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div); | 
 | 654 |  | 
 | 655 | 	t = &hwa742.reg_timings; | 
 | 656 | 	memset(t, 0, sizeof(*t)); | 
 | 657 | 	t->clk_div = div; | 
 | 658 | 	t->cs_on_time = 0; | 
 | 659 | 	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); | 
 | 660 | 	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); | 
 | 661 | 	t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div); | 
 | 662 | 	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div); | 
 | 663 | 	t->re_off_time = round_to_extif_ticks(t->re_on_time + 16000, div); | 
 | 664 | 	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div); | 
 | 665 | 	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); | 
 | 666 | 	if (t->we_cycle_time < t->we_off_time) | 
 | 667 | 		t->we_cycle_time = t->we_off_time; | 
 | 668 | 	t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); | 
 | 669 | 	if (t->re_cycle_time < t->re_off_time) | 
 | 670 | 		t->re_cycle_time = t->re_off_time; | 
 | 671 | 	t->cs_pulse_width = 0; | 
 | 672 |  | 
 | 673 | 	dev_dbg(hwa742.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n", | 
 | 674 | 		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); | 
 | 675 | 	dev_dbg(hwa742.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n", | 
 | 676 | 		 t->we_on_time, t->we_off_time, t->re_cycle_time, | 
 | 677 | 		 t->we_cycle_time); | 
 | 678 | 	dev_dbg(hwa742.fbdev->dev, "[reg]rdaccess %d cspulse %d\n", | 
 | 679 | 		 t->access_time, t->cs_pulse_width); | 
 | 680 |  | 
 | 681 | 	return hwa742.extif->convert_timings(t); | 
 | 682 | } | 
 | 683 |  | 
 | 684 | static int calc_lut_timing(unsigned long sysclk, int div) | 
 | 685 | { | 
 | 686 | 	struct extif_timings *t; | 
 | 687 | 	unsigned long systim; | 
 | 688 |  | 
 | 689 | 	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns, | 
 | 690 | 	 * AccessTime 2 ns + 4 * SYSCLK + 26 (lut), | 
 | 691 | 	 * WEOffTime = WEOnTime + 1 ns, | 
 | 692 | 	 * REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut), | 
 | 693 | 	 * CSOffTime = REOffTime + 1 ns | 
 | 694 | 	 * ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut), | 
 | 695 | 	 * WriteCycle = 2*SYSCLK + 2 ns, | 
 | 696 | 	 * CSPulseWidth = 10 ns | 
 | 697 | 	 */ | 
 | 698 | 	systim = 1000000000 / (sysclk / 1000); | 
 | 699 | 	dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps" | 
 | 700 | 		  "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div); | 
 | 701 |  | 
 | 702 | 	t = &hwa742.lut_timings; | 
 | 703 | 	memset(t, 0, sizeof(*t)); | 
 | 704 |  | 
 | 705 | 	t->clk_div = div; | 
 | 706 |  | 
 | 707 | 	t->cs_on_time = 0; | 
 | 708 | 	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); | 
 | 709 | 	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); | 
 | 710 | 	t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim + | 
 | 711 | 					      26000, div); | 
 | 712 | 	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div); | 
 | 713 | 	t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim + | 
 | 714 | 					      26000, div); | 
 | 715 | 	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div); | 
 | 716 | 	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); | 
 | 717 | 	if (t->we_cycle_time < t->we_off_time) | 
 | 718 | 		t->we_cycle_time = t->we_off_time; | 
 | 719 | 	t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div); | 
 | 720 | 	if (t->re_cycle_time < t->re_off_time) | 
 | 721 | 		t->re_cycle_time = t->re_off_time; | 
 | 722 | 	t->cs_pulse_width = 0; | 
 | 723 |  | 
 | 724 | 	dev_dbg(hwa742.fbdev->dev, "[lut]cson %d csoff %d reon %d reoff %d\n", | 
 | 725 | 		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); | 
 | 726 | 	dev_dbg(hwa742.fbdev->dev, "[lut]weon %d weoff %d recyc %d wecyc %d\n", | 
 | 727 | 		 t->we_on_time, t->we_off_time, t->re_cycle_time, | 
 | 728 | 		 t->we_cycle_time); | 
 | 729 | 	dev_dbg(hwa742.fbdev->dev, "[lut]rdaccess %d cspulse %d\n", | 
 | 730 | 		 t->access_time, t->cs_pulse_width); | 
 | 731 |  | 
 | 732 | 	return hwa742.extif->convert_timings(t); | 
 | 733 | } | 
 | 734 |  | 
 | 735 | static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div) | 
 | 736 | { | 
 | 737 | 	int max_clk_div; | 
 | 738 | 	int div; | 
 | 739 |  | 
 | 740 | 	hwa742.extif->get_clk_info(&hwa742.extif_clk_period, &max_clk_div); | 
 | 741 | 	for (div = 1; div < max_clk_div; div++) { | 
 | 742 | 		if (calc_reg_timing(sysclk, div) == 0) | 
 | 743 | 			break; | 
 | 744 | 	} | 
| Roel Kluin | ba78289 | 2009-03-31 15:25:32 -0700 | [diff] [blame] | 745 | 	if (div >= max_clk_div) | 
| Imre Deak | aae76ef | 2007-05-26 19:19:19 +0530 | [diff] [blame] | 746 | 		goto err; | 
 | 747 |  | 
 | 748 | 	*extif_mem_div = div; | 
 | 749 |  | 
 | 750 | 	for (div = 1; div < max_clk_div; div++) { | 
 | 751 | 		if (calc_lut_timing(sysclk, div) == 0) | 
 | 752 | 			break; | 
 | 753 | 	} | 
 | 754 |  | 
| Roel Kluin | ba78289 | 2009-03-31 15:25:32 -0700 | [diff] [blame] | 755 | 	if (div >= max_clk_div) | 
| Imre Deak | aae76ef | 2007-05-26 19:19:19 +0530 | [diff] [blame] | 756 | 		goto err; | 
 | 757 |  | 
 | 758 | 	return 0; | 
 | 759 |  | 
 | 760 | err: | 
 | 761 | 	dev_err(hwa742.fbdev->dev, "can't setup timings\n"); | 
 | 762 | 	return -1; | 
 | 763 | } | 
 | 764 |  | 
 | 765 | static void calc_hwa742_clk_rates(unsigned long ext_clk, | 
 | 766 | 				unsigned long *sys_clk, unsigned long *pix_clk) | 
 | 767 | { | 
 | 768 | 	int pix_clk_src; | 
 | 769 | 	int sys_div = 0, sys_mul = 0; | 
 | 770 | 	int pix_div; | 
 | 771 |  | 
 | 772 | 	pix_clk_src = hwa742_read_reg(HWA742_CLK_SRC_REG); | 
 | 773 | 	pix_div = ((pix_clk_src >> 3) & 0x1f) + 1; | 
 | 774 | 	if ((pix_clk_src & (0x3 << 1)) == 0) { | 
 | 775 | 		/* Source is the PLL */ | 
 | 776 | 		sys_div = (hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x3f) + 1; | 
 | 777 | 		sys_mul = (hwa742_read_reg(HWA742_PLL_4_REG) & 0x7f) + 1; | 
 | 778 | 		*sys_clk = ext_clk * sys_mul / sys_div; | 
 | 779 | 	} else	/* else source is ext clk, or oscillator */ | 
 | 780 | 		*sys_clk = ext_clk; | 
 | 781 |  | 
 | 782 | 	*pix_clk = *sys_clk / pix_div;			/* HZ */ | 
 | 783 | 	dev_dbg(hwa742.fbdev->dev, | 
 | 784 | 		"ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n", | 
 | 785 | 		ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul); | 
 | 786 | 	dev_dbg(hwa742.fbdev->dev, "sys_clk %ld pix_clk %ld\n", | 
 | 787 | 		*sys_clk, *pix_clk); | 
 | 788 | } | 
 | 789 |  | 
 | 790 |  | 
 | 791 | static int setup_tearsync(unsigned long pix_clk, int extif_div) | 
 | 792 | { | 
 | 793 | 	int hdisp, vdisp; | 
 | 794 | 	int hndp, vndp; | 
 | 795 | 	int hsw, vsw; | 
 | 796 | 	int hs, vs; | 
 | 797 | 	int hs_pol_inv, vs_pol_inv; | 
 | 798 | 	int use_hsvs, use_ndp; | 
 | 799 | 	u8  b; | 
 | 800 |  | 
 | 801 | 	hsw = hwa742_read_reg(HWA742_HS_W_REG); | 
 | 802 | 	vsw = hwa742_read_reg(HWA742_VS_W_REG); | 
 | 803 | 	hs_pol_inv = !(hsw & 0x80); | 
 | 804 | 	vs_pol_inv = !(vsw & 0x80); | 
 | 805 | 	hsw = hsw & 0x7f; | 
 | 806 | 	vsw = vsw & 0x3f; | 
 | 807 |  | 
 | 808 | 	hdisp = (hwa742_read_reg(HWA742_H_DISP_REG) & 0x7f) * 8; | 
 | 809 | 	vdisp = hwa742_read_reg(HWA742_V_DISP_1_REG) + | 
 | 810 | 		((hwa742_read_reg(HWA742_V_DISP_2_REG) & 0x3) << 8); | 
 | 811 |  | 
 | 812 | 	hndp = hwa742_read_reg(HWA742_H_NDP_REG) & 0x7f; | 
 | 813 | 	vndp = hwa742_read_reg(HWA742_V_NDP_REG); | 
 | 814 |  | 
 | 815 | 	/* time to transfer one pixel (16bpp) in ps */ | 
 | 816 | 	hwa742.pix_tx_time = hwa742.reg_timings.we_cycle_time; | 
 | 817 | 	if (hwa742.extif->get_max_tx_rate != NULL) { | 
 | 818 | 		/* | 
 | 819 | 		 * The external interface might have a rate limitation, | 
 | 820 | 		 * if so, we have to maximize our transfer rate. | 
 | 821 | 		 */ | 
 | 822 | 		unsigned long min_tx_time; | 
 | 823 | 		unsigned long max_tx_rate = hwa742.extif->get_max_tx_rate(); | 
 | 824 |  | 
 | 825 | 		dev_dbg(hwa742.fbdev->dev, "max_tx_rate %ld HZ\n", | 
 | 826 | 			max_tx_rate); | 
 | 827 | 		min_tx_time = 1000000000 / (max_tx_rate / 1000);  /* ps */ | 
 | 828 | 		if (hwa742.pix_tx_time < min_tx_time) | 
 | 829 | 			hwa742.pix_tx_time = min_tx_time; | 
 | 830 | 	} | 
 | 831 |  | 
 | 832 | 	/* time to update one line in ps */ | 
 | 833 | 	hwa742.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000); | 
 | 834 | 	hwa742.line_upd_time *= 1000; | 
 | 835 | 	if (hdisp * hwa742.pix_tx_time > hwa742.line_upd_time) | 
 | 836 | 		/* | 
 | 837 | 		 * transfer speed too low, we might have to use both | 
 | 838 | 		 * HS and VS | 
 | 839 | 		 */ | 
 | 840 | 		use_hsvs = 1; | 
 | 841 | 	else | 
 | 842 | 		/* decent transfer speed, we'll always use only VS */ | 
 | 843 | 		use_hsvs = 0; | 
 | 844 |  | 
 | 845 | 	if (use_hsvs && (hs_pol_inv || vs_pol_inv)) { | 
 | 846 | 		/* | 
 | 847 | 		 * HS or'ed with VS doesn't work, use the active high | 
 | 848 | 		 * TE signal based on HNDP / VNDP | 
 | 849 | 		 */ | 
 | 850 | 		use_ndp = 1; | 
 | 851 | 		hs_pol_inv = 0; | 
 | 852 | 		vs_pol_inv = 0; | 
 | 853 | 		hs = hndp; | 
 | 854 | 		vs = vndp; | 
 | 855 | 	} else { | 
 | 856 | 		/* | 
 | 857 | 		 * Use HS or'ed with VS as a TE signal if both are needed | 
 | 858 | 		 * or VNDP if only vsync is needed. | 
 | 859 | 		 */ | 
 | 860 | 		use_ndp = 0; | 
 | 861 | 		hs = hsw; | 
 | 862 | 		vs = vsw; | 
 | 863 | 		if (!use_hsvs) { | 
 | 864 | 			hs_pol_inv = 0; | 
 | 865 | 			vs_pol_inv = 0; | 
 | 866 | 		} | 
 | 867 | 	} | 
 | 868 |  | 
 | 869 | 	hs = hs * 1000000 / (pix_clk / 1000);			/* ps */ | 
 | 870 | 	hs *= 1000; | 
 | 871 |  | 
 | 872 | 	vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000);	/* ps */ | 
 | 873 | 	vs *= 1000; | 
 | 874 |  | 
 | 875 | 	if (vs <= hs) | 
 | 876 | 		return -EDOM; | 
 | 877 | 	/* set VS to 120% of HS to minimize VS detection time */ | 
 | 878 | 	vs = hs * 12 / 10; | 
 | 879 | 	/* minimize HS too */ | 
 | 880 | 	hs = 10000; | 
 | 881 |  | 
 | 882 | 	b = hwa742_read_reg(HWA742_NDP_CTRL); | 
 | 883 | 	b &= ~0x3; | 
 | 884 | 	b |= use_hsvs ? 1 : 0; | 
 | 885 | 	b |= (use_ndp && use_hsvs) ? 0 : 2; | 
 | 886 | 	hwa742_write_reg(HWA742_NDP_CTRL, b); | 
 | 887 |  | 
 | 888 | 	hwa742.vsync_only = !use_hsvs; | 
 | 889 |  | 
 | 890 | 	dev_dbg(hwa742.fbdev->dev, | 
 | 891 | 		"pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n", | 
 | 892 | 		pix_clk, hwa742.pix_tx_time, hwa742.line_upd_time); | 
 | 893 | 	dev_dbg(hwa742.fbdev->dev, | 
 | 894 | 		"hs %d ps vs %d ps mode %d vsync_only %d\n", | 
 | 895 | 		hs, vs, (b & 0x3), !use_hsvs); | 
 | 896 |  | 
 | 897 | 	return hwa742.extif->setup_tearsync(1, hs, vs, | 
 | 898 | 					    hs_pol_inv, vs_pol_inv, extif_div); | 
 | 899 | } | 
 | 900 |  | 
 | 901 | static void hwa742_get_caps(int plane, struct omapfb_caps *caps) | 
 | 902 | { | 
 | 903 | 	hwa742.int_ctrl->get_caps(plane, caps); | 
 | 904 | 	caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE | | 
 | 905 | 		      OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE; | 
 | 906 | 	if (hwa742.te_connected) | 
 | 907 | 		caps->ctrl |= OMAPFB_CAPS_TEARSYNC; | 
 | 908 | 	caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) | | 
 | 909 | 			   (1 << OMAPFB_COLOR_YUV420); | 
 | 910 | } | 
 | 911 |  | 
 | 912 | static void hwa742_suspend(void) | 
 | 913 | { | 
 | 914 | 	hwa742.update_mode_before_suspend = hwa742.update_mode; | 
 | 915 | 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); | 
 | 916 | 	/* Enable sleep mode */ | 
 | 917 | 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1); | 
 | 918 | 	if (hwa742.power_down != NULL) | 
 | 919 | 		hwa742.power_down(hwa742.fbdev->dev); | 
 | 920 | } | 
 | 921 |  | 
 | 922 | static void hwa742_resume(void) | 
 | 923 | { | 
 | 924 | 	if (hwa742.power_up != NULL) | 
 | 925 | 		hwa742.power_up(hwa742.fbdev->dev); | 
 | 926 | 	/* Disable sleep mode */ | 
 | 927 | 	hwa742_write_reg(HWA742_POWER_SAVE, 0); | 
 | 928 | 	while (1) { | 
 | 929 | 		/* Loop until PLL output is stabilized */ | 
 | 930 | 		if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7)) | 
 | 931 | 			break; | 
 | 932 | 		set_current_state(TASK_UNINTERRUPTIBLE); | 
 | 933 | 		schedule_timeout(msecs_to_jiffies(5)); | 
 | 934 | 	} | 
 | 935 | 	hwa742_set_update_mode(hwa742.update_mode_before_suspend); | 
 | 936 | } | 
 | 937 |  | 
 | 938 | static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, | 
 | 939 | 		       struct omapfb_mem_desc *req_vram) | 
 | 940 | { | 
 | 941 | 	int r = 0, i; | 
 | 942 | 	u8 rev, conf; | 
 | 943 | 	unsigned long ext_clk; | 
 | 944 | 	unsigned long sys_clk, pix_clk; | 
 | 945 | 	int extif_mem_div; | 
 | 946 | 	struct omapfb_platform_data *omapfb_conf; | 
 | 947 | 	struct hwa742_platform_data *ctrl_conf; | 
 | 948 |  | 
 | 949 | 	BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl); | 
 | 950 |  | 
 | 951 | 	hwa742.fbdev = fbdev; | 
 | 952 | 	hwa742.extif = fbdev->ext_if; | 
 | 953 | 	hwa742.int_ctrl = fbdev->int_ctrl; | 
 | 954 |  | 
 | 955 | 	omapfb_conf = fbdev->dev->platform_data; | 
 | 956 | 	ctrl_conf = omapfb_conf->ctrl_platform_data; | 
 | 957 |  | 
 | 958 | 	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) { | 
 | 959 | 		dev_err(fbdev->dev, "HWA742: missing platform data\n"); | 
 | 960 | 		r = -ENOENT; | 
 | 961 | 		goto err1; | 
 | 962 | 	} | 
 | 963 |  | 
 | 964 | 	hwa742.power_down = ctrl_conf->power_down; | 
 | 965 | 	hwa742.power_up = ctrl_conf->power_up; | 
 | 966 |  | 
 | 967 | 	spin_lock_init(&hwa742.req_lock); | 
 | 968 |  | 
 | 969 | 	if ((r = hwa742.int_ctrl->init(fbdev, 1, req_vram)) < 0) | 
 | 970 | 		goto err1; | 
 | 971 |  | 
 | 972 | 	if ((r = hwa742.extif->init(fbdev)) < 0) | 
 | 973 | 		goto err2; | 
 | 974 |  | 
 | 975 | 	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev); | 
 | 976 | 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) | 
 | 977 | 		goto err3; | 
 | 978 | 	hwa742.extif->set_timings(&hwa742.reg_timings); | 
 | 979 | 	if (hwa742.power_up != NULL) | 
 | 980 | 		hwa742.power_up(fbdev->dev); | 
 | 981 |  | 
 | 982 | 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); | 
 | 983 | 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) | 
 | 984 | 		goto err4; | 
 | 985 | 	hwa742.extif->set_timings(&hwa742.reg_timings); | 
 | 986 |  | 
 | 987 | 	rev = hwa742_read_reg(HWA742_REV_CODE_REG); | 
 | 988 | 	if ((rev & 0xfc) != 0x80) { | 
 | 989 | 		dev_err(fbdev->dev, "HWA742: invalid revision %02x\n", rev); | 
 | 990 | 		r = -ENODEV; | 
 | 991 | 		goto err4; | 
 | 992 | 	} | 
 | 993 |  | 
 | 994 |  | 
 | 995 | 	if (!(hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x80)) { | 
 | 996 | 		dev_err(fbdev->dev, | 
 | 997 | 		      "HWA742: controller not initialized by the bootloader\n"); | 
 | 998 | 		r = -ENODEV; | 
 | 999 | 		goto err4; | 
 | 1000 | 	} | 
 | 1001 |  | 
 | 1002 | 	if (ctrl_conf->te_connected) { | 
 | 1003 | 		if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) { | 
 | 1004 | 			dev_err(hwa742.fbdev->dev, | 
 | 1005 | 			       "HWA742: can't setup tearing synchronization\n"); | 
 | 1006 | 			goto err4; | 
 | 1007 | 		} | 
 | 1008 | 		hwa742.te_connected = 1; | 
 | 1009 | 	} | 
 | 1010 |  | 
 | 1011 | 	hwa742.max_transmit_size = hwa742.extif->max_transmit_size; | 
 | 1012 |  | 
 | 1013 | 	hwa742.update_mode = OMAPFB_UPDATE_DISABLED; | 
 | 1014 |  | 
 | 1015 | 	hwa742.auto_update_window.x = 0; | 
 | 1016 | 	hwa742.auto_update_window.y = 0; | 
 | 1017 | 	hwa742.auto_update_window.width = fbdev->panel->x_res; | 
 | 1018 | 	hwa742.auto_update_window.height = fbdev->panel->y_res; | 
 | 1019 | 	hwa742.auto_update_window.format = 0; | 
 | 1020 |  | 
 | 1021 | 	init_timer(&hwa742.auto_update_timer); | 
 | 1022 | 	hwa742.auto_update_timer.function = hwa742_update_window_auto; | 
 | 1023 | 	hwa742.auto_update_timer.data = 0; | 
 | 1024 |  | 
 | 1025 | 	hwa742.prev_color_mode = -1; | 
 | 1026 | 	hwa742.prev_flags = 0; | 
 | 1027 |  | 
 | 1028 | 	hwa742.fbdev = fbdev; | 
 | 1029 |  | 
 | 1030 | 	INIT_LIST_HEAD(&hwa742.free_req_list); | 
 | 1031 | 	INIT_LIST_HEAD(&hwa742.pending_req_list); | 
 | 1032 | 	for (i = 0; i < ARRAY_SIZE(hwa742.req_pool); i++) | 
 | 1033 | 		list_add(&hwa742.req_pool[i].entry, &hwa742.free_req_list); | 
 | 1034 | 	BUG_ON(i <= IRQ_REQ_POOL_SIZE); | 
 | 1035 | 	sema_init(&hwa742.req_sema, i - IRQ_REQ_POOL_SIZE); | 
 | 1036 |  | 
 | 1037 | 	conf = hwa742_read_reg(HWA742_CONFIG_REG); | 
 | 1038 | 	dev_info(fbdev->dev, ": Epson HWA742 LCD controller rev %d " | 
 | 1039 | 			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); | 
 | 1040 |  | 
 | 1041 | 	return 0; | 
 | 1042 | err4: | 
 | 1043 | 	if (hwa742.power_down != NULL) | 
 | 1044 | 		hwa742.power_down(fbdev->dev); | 
 | 1045 | err3: | 
 | 1046 | 	hwa742.extif->cleanup(); | 
 | 1047 | err2: | 
 | 1048 | 	hwa742.int_ctrl->cleanup(); | 
 | 1049 | err1: | 
 | 1050 | 	return r; | 
 | 1051 | } | 
 | 1052 |  | 
 | 1053 | static void hwa742_cleanup(void) | 
 | 1054 | { | 
 | 1055 | 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); | 
 | 1056 | 	hwa742.extif->cleanup(); | 
 | 1057 | 	hwa742.int_ctrl->cleanup(); | 
 | 1058 | 	if (hwa742.power_down != NULL) | 
 | 1059 | 		hwa742.power_down(hwa742.fbdev->dev); | 
 | 1060 | } | 
 | 1061 |  | 
 | 1062 | struct lcd_ctrl hwa742_ctrl = { | 
 | 1063 | 	.name			= "hwa742", | 
 | 1064 | 	.init			= hwa742_init, | 
 | 1065 | 	.cleanup		= hwa742_cleanup, | 
 | 1066 | 	.bind_client		= hwa742_bind_client, | 
 | 1067 | 	.get_caps		= hwa742_get_caps, | 
 | 1068 | 	.set_update_mode	= hwa742_set_update_mode, | 
 | 1069 | 	.get_update_mode	= hwa742_get_update_mode, | 
 | 1070 | 	.setup_plane		= hwa742_setup_plane, | 
 | 1071 | 	.enable_plane		= hwa742_enable_plane, | 
 | 1072 | 	.update_window		= hwa742_update_window_async, | 
 | 1073 | 	.sync			= hwa742_sync, | 
 | 1074 | 	.suspend		= hwa742_suspend, | 
 | 1075 | 	.resume			= hwa742_resume, | 
 | 1076 | }; | 
 | 1077 |  |