Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Driver for the NXP SAA7164 PCIe bridge |
| 3 | * |
Steven Toth | 9b8b019 | 2010-07-31 14:39:44 -0300 | [diff] [blame] | 4 | * Copyright (c) 2010 Steven Toth <stoth@kernellabs.com> |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | #include <linux/wait.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 23 | #include <linux/slab.h> |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 24 | |
| 25 | #include "saa7164.h" |
| 26 | |
Steven Toth | 1247ff5 | 2010-07-31 16:18:35 -0300 | [diff] [blame^] | 27 | int saa7164_api_get_load_info(struct saa7164_dev *dev, tmFwInfoStruct_t *i) |
| 28 | { |
| 29 | int ret, debug; |
| 30 | |
| 31 | if (!(debug & DBGLVL_CPU)) |
| 32 | return 0; |
| 33 | |
| 34 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 35 | |
| 36 | i->deviceinst = 0; |
| 37 | i->devicespec = 0; |
| 38 | i->mode = 0; |
| 39 | i->status = 0; |
| 40 | |
| 41 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 42 | GET_FW_STATUS_CONTROL, sizeof(tmFwInfoStruct_t), i); |
| 43 | if (ret != SAA_OK) { |
| 44 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 45 | } |
| 46 | |
| 47 | printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad); |
| 48 | |
| 49 | return ret; |
| 50 | } |
| 51 | |
Steven Toth | 0b62ceb | 2010-07-31 16:17:51 -0300 | [diff] [blame] | 52 | int saa7164_api_collect_debug(struct saa7164_dev *dev) |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 53 | { |
| 54 | tmComResDebugGetData_t d; |
| 55 | u8 more = 255; |
| 56 | int ret; |
| 57 | |
| 58 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 59 | |
| 60 | while (more--) { |
| 61 | |
| 62 | memset(&d, 0, sizeof(d)); |
| 63 | |
| 64 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 65 | GET_DEBUG_DATA_CONTROL, sizeof(d), &d); |
| 66 | if (ret != SAA_OK) { |
| 67 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 68 | } |
| 69 | |
| 70 | if (d.dwResult != SAA_OK) |
| 71 | break; |
| 72 | |
Steven Toth | 0b62ceb | 2010-07-31 16:17:51 -0300 | [diff] [blame] | 73 | printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr, d.ucDebugData); |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 74 | } |
| 75 | |
| 76 | return 0; |
| 77 | } |
| 78 | |
| 79 | int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level) |
| 80 | { |
| 81 | tmComResDebugSetLevel_t lvl; |
| 82 | int ret; |
| 83 | |
| 84 | dprintk(DBGLVL_API, "%s(level=%d)\n", __func__, level); |
| 85 | |
| 86 | /* Retrieve current state */ |
| 87 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 88 | SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl); |
| 89 | if (ret != SAA_OK) { |
| 90 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 91 | } |
| 92 | dprintk(DBGLVL_API, "%s() Was %d\n", __func__, lvl.dwDebugLevel); |
| 93 | |
| 94 | lvl.dwDebugLevel = level; |
| 95 | |
| 96 | /* set new state */ |
| 97 | ret = saa7164_cmd_send(dev, 0, SET_CUR, |
| 98 | SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl); |
| 99 | if (ret != SAA_OK) { |
| 100 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 101 | } |
| 102 | |
| 103 | return ret; |
| 104 | } |
| 105 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 106 | int saa7164_api_set_vbi_format(struct saa7164_port *port) |
| 107 | { |
| 108 | struct saa7164_dev *dev = port->dev; |
| 109 | tmComResProbeCommit_t fmt, rsp; |
| 110 | int ret; |
| 111 | |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 112 | dprintk(DBGLVL_API, "%s(nr=%d, unitid=0x%x)\n", __func__, |
| 113 | port->nr, port->hwcfg.unitid); |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 114 | |
| 115 | fmt.bmHint = 0; |
| 116 | fmt.bFormatIndex = 1; |
| 117 | fmt.bFrameIndex = 1; |
| 118 | |
| 119 | /* Probe, see if it can support this format */ |
| 120 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, |
| 121 | SET_CUR, SAA_PROBE_CONTROL, sizeof(fmt), &fmt); |
| 122 | if (ret != SAA_OK) |
| 123 | printk(KERN_ERR "%s() set error, ret = 0x%x\n", __func__, ret); |
| 124 | |
| 125 | /* See of the format change was successful */ |
| 126 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, |
| 127 | GET_CUR, SAA_PROBE_CONTROL, sizeof(rsp), &rsp); |
| 128 | if (ret != SAA_OK) { |
| 129 | printk(KERN_ERR "%s() get error, ret = 0x%x\n", __func__, ret); |
| 130 | } else { |
| 131 | /* Compare requested vs received, should be same */ |
| 132 | if (memcmp(&fmt, &rsp, sizeof(rsp)) == 0) { |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 133 | dprintk(DBGLVL_API, "SET/PROBE Verified\n"); |
| 134 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 135 | /* Ask the device to select the negotiated format */ |
| 136 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, |
| 137 | SET_CUR, SAA_COMMIT_CONTROL, sizeof(fmt), &fmt); |
| 138 | if (ret != SAA_OK) |
| 139 | printk(KERN_ERR "%s() commit error, ret = 0x%x\n", |
| 140 | __func__, ret); |
| 141 | |
| 142 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, |
| 143 | GET_CUR, SAA_COMMIT_CONTROL, sizeof(rsp), &rsp); |
| 144 | if (ret != SAA_OK) |
| 145 | printk(KERN_ERR "%s() GET commit error, ret = 0x%x\n", |
| 146 | __func__, ret); |
| 147 | |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 148 | if (memcmp(&fmt, &rsp, sizeof(rsp)) != 0) { |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 149 | printk(KERN_ERR "%s() memcmp error, ret = 0x%x\n", |
| 150 | __func__, ret); |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 151 | } else |
| 152 | dprintk(DBGLVL_API, "SET/COMMIT Verified\n"); |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 153 | |
| 154 | dprintk(DBGLVL_API, "rsp.bmHint = 0x%x\n", rsp.bmHint); |
| 155 | dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n", rsp.bFormatIndex); |
| 156 | dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n", rsp.bFrameIndex); |
| 157 | } else |
| 158 | printk(KERN_ERR "%s() compare failed\n", __func__); |
| 159 | } |
| 160 | |
| 161 | if (ret == SAA_OK) |
| 162 | dprintk(DBGLVL_API, "%s(nr=%d) Success\n", __func__, port->nr); |
| 163 | |
| 164 | return ret; |
| 165 | } |
| 166 | |
Steven Toth | eafea21 | 2010-07-31 14:48:45 -0300 | [diff] [blame] | 167 | int saa7164_api_set_gop_size(struct saa7164_port *port) |
| 168 | { |
| 169 | struct saa7164_dev *dev = port->dev; |
| 170 | tmComResEncVideoGopStructure_t gs; |
| 171 | int ret; |
| 172 | |
| 173 | dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| 174 | |
Steven Toth | 3ed43cf | 2010-07-31 14:58:35 -0300 | [diff] [blame] | 175 | gs.ucRefFrameDist = port->encoder_params.refdist; |
Steven Toth | 5fa56cc | 2010-07-31 15:05:35 -0300 | [diff] [blame] | 176 | gs.ucGOPSize = port->encoder_params.gop_size; |
Steven Toth | eafea21 | 2010-07-31 14:48:45 -0300 | [diff] [blame] | 177 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 178 | EU_VIDEO_GOP_STRUCTURE_CONTROL, |
| 179 | sizeof(gs), &gs); |
| 180 | if (ret != SAA_OK) |
| 181 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 182 | |
| 183 | return ret; |
| 184 | } |
| 185 | |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 186 | int saa7164_api_set_encoder(struct saa7164_port *port) |
| 187 | { |
| 188 | struct saa7164_dev *dev = port->dev; |
| 189 | tmComResEncVideoBitRate_t vb; |
| 190 | tmComResEncAudioBitRate_t ab; |
| 191 | int ret; |
| 192 | |
Steven Toth | eafea21 | 2010-07-31 14:48:45 -0300 | [diff] [blame] | 193 | dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, |
| 194 | port->hwcfg.sourceid); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 195 | |
Steven Toth | f91d095 | 2010-07-31 15:03:31 -0300 | [diff] [blame] | 196 | if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) |
| 197 | port->encoder_profile = EU_PROFILE_PS_DVD; |
| 198 | else |
| 199 | port->encoder_profile = EU_PROFILE_TS_HQ; |
| 200 | |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 201 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 202 | EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); |
| 203 | if (ret != SAA_OK) |
| 204 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 205 | |
Steven Toth | f6eeece | 2010-07-31 15:28:18 -0300 | [diff] [blame] | 206 | /* Resolution */ |
| 207 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 208 | EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); |
| 209 | if (ret != SAA_OK) |
| 210 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 211 | |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 212 | /* Establish video bitrates */ |
Steven Toth | 2600d71 | 2010-07-31 14:51:30 -0300 | [diff] [blame] | 213 | if (port->encoder_params.bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) |
| 214 | vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_CONSTANT; |
| 215 | else |
| 216 | vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK; |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 217 | vb.dwVideoBitRate = port->encoder_params.bitrate; |
Steven Toth | 968b11b | 2010-07-31 14:59:38 -0300 | [diff] [blame] | 218 | vb.dwVideoBitRatePeak = port->encoder_params.bitrate_peak; |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 219 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 220 | EU_VIDEO_BIT_RATE_CONTROL, sizeof(tmComResEncVideoBitRate_t), &vb); |
| 221 | if (ret != SAA_OK) |
| 222 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 223 | |
| 224 | /* Establish audio bitrates */ |
| 225 | ab.ucAudioBitRateMode = 0; |
| 226 | ab.dwAudioBitRate = 384000; |
| 227 | ab.dwAudioBitRatePeak = ab.dwAudioBitRate; |
| 228 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 229 | EU_AUDIO_BIT_RATE_CONTROL, sizeof(tmComResEncAudioBitRate_t), &ab); |
| 230 | if (ret != SAA_OK) |
| 231 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 232 | |
| 233 | saa7164_api_set_aspect_ratio(port); |
Steven Toth | eafea21 | 2010-07-31 14:48:45 -0300 | [diff] [blame] | 234 | saa7164_api_set_gop_size(port); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 235 | |
| 236 | return ret; |
| 237 | } |
| 238 | |
| 239 | int saa7164_api_get_encoder(struct saa7164_port *port) |
| 240 | { |
| 241 | struct saa7164_dev *dev = port->dev; |
| 242 | tmComResEncVideoBitRate_t v; |
| 243 | tmComResEncAudioBitRate_t a; |
| 244 | tmComResEncVideoInputAspectRatio_t ar; |
| 245 | int ret; |
| 246 | |
| 247 | dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, port->hwcfg.sourceid); |
| 248 | |
| 249 | port->encoder_profile = 0; |
| 250 | port->video_format = 0; |
| 251 | port->video_resolution = 0; |
| 252 | port->audio_format = 0; |
| 253 | |
| 254 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
| 255 | EU_PROFILE_CONTROL, sizeof(u8), &port->encoder_profile); |
| 256 | if (ret != SAA_OK) |
| 257 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 258 | |
| 259 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
Steven Toth | f6eeece | 2010-07-31 15:28:18 -0300 | [diff] [blame] | 260 | EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8), &port->video_resolution); |
| 261 | if (ret != SAA_OK) |
| 262 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 263 | |
| 264 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 265 | EU_VIDEO_FORMAT_CONTROL, sizeof(u8), &port->video_format); |
| 266 | if (ret != SAA_OK) |
| 267 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 268 | |
| 269 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
| 270 | EU_VIDEO_BIT_RATE_CONTROL, sizeof(v), &v); |
| 271 | if (ret != SAA_OK) |
| 272 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 273 | |
| 274 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
| 275 | EU_AUDIO_FORMAT_CONTROL, sizeof(u8), &port->audio_format); |
| 276 | if (ret != SAA_OK) |
| 277 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 278 | |
| 279 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
| 280 | EU_AUDIO_BIT_RATE_CONTROL, sizeof(a), &a); |
| 281 | if (ret != SAA_OK) |
| 282 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 283 | |
| 284 | /* Aspect Ratio */ |
| 285 | ar.width = 0; |
| 286 | ar.height = 0; |
| 287 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR, |
| 288 | EU_VIDEO_INPUT_ASPECT_CONTROL, |
| 289 | sizeof(tmComResEncVideoInputAspectRatio_t), &ar); |
| 290 | if (ret != SAA_OK) |
| 291 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 292 | |
| 293 | dprintk(DBGLVL_ENC, "encoder_profile = %d\n", port->encoder_profile); |
| 294 | dprintk(DBGLVL_ENC, "video_format = %d\n", port->video_format); |
| 295 | dprintk(DBGLVL_ENC, "audio_format = %d\n", port->audio_format); |
| 296 | dprintk(DBGLVL_ENC, "video_resolution= %d\n", port->video_resolution); |
| 297 | dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n", v.ucVideoBitRateMode); |
| 298 | dprintk(DBGLVL_ENC, "v.dwVideoBitRate = %d\n", v.dwVideoBitRate); |
| 299 | dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n", v.dwVideoBitRatePeak); |
| 300 | dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n", a.ucAudioBitRateMode); |
| 301 | dprintk(DBGLVL_ENC, "a.dwVideoBitRate = %d\n", a.dwAudioBitRate); |
| 302 | dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n", a.dwAudioBitRatePeak); |
| 303 | dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n", ar.width, ar.height); |
| 304 | |
| 305 | return ret; |
| 306 | } |
| 307 | |
| 308 | int saa7164_api_set_aspect_ratio(struct saa7164_port *port) |
| 309 | { |
| 310 | struct saa7164_dev *dev = port->dev; |
| 311 | tmComResEncVideoInputAspectRatio_t ar; |
| 312 | int ret; |
| 313 | |
| 314 | dprintk(DBGLVL_ENC, "%s(%d)\n", __func__, |
| 315 | port->encoder_params.ctl_aspect); |
| 316 | |
| 317 | switch (port->encoder_params.ctl_aspect) { |
| 318 | case V4L2_MPEG_VIDEO_ASPECT_1x1: |
| 319 | ar.width = 1; |
| 320 | ar.height = 1; |
| 321 | break; |
| 322 | case V4L2_MPEG_VIDEO_ASPECT_4x3: |
| 323 | ar.width = 4; |
| 324 | ar.height = 3; |
| 325 | break; |
| 326 | case V4L2_MPEG_VIDEO_ASPECT_16x9: |
| 327 | ar.width = 16; |
| 328 | ar.height = 9; |
| 329 | break; |
| 330 | case V4L2_MPEG_VIDEO_ASPECT_221x100: |
| 331 | ar.width = 221; |
| 332 | ar.height = 100; |
| 333 | break; |
| 334 | default: |
| 335 | BUG(); |
| 336 | } |
| 337 | |
| 338 | dprintk(DBGLVL_ENC, "%s(%d) now %d:%d\n", __func__, |
| 339 | port->encoder_params.ctl_aspect, |
| 340 | ar.width, ar.height); |
| 341 | |
| 342 | /* Aspect Ratio */ |
| 343 | ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR, |
| 344 | EU_VIDEO_INPUT_ASPECT_CONTROL, |
| 345 | sizeof(tmComResEncVideoInputAspectRatio_t), &ar); |
| 346 | if (ret != SAA_OK) |
| 347 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 348 | |
| 349 | return ret; |
| 350 | } |
| 351 | |
| 352 | int saa7164_api_set_usercontrol(struct saa7164_port *port, u8 ctl) |
| 353 | { |
| 354 | struct saa7164_dev *dev = port->dev; |
| 355 | int ret; |
| 356 | u16 val; |
| 357 | |
| 358 | if (ctl == PU_BRIGHTNESS_CONTROL) |
| 359 | val = port->ctl_brightness; |
| 360 | else |
| 361 | if (ctl == PU_CONTRAST_CONTROL) |
| 362 | val = port->ctl_contrast; |
| 363 | else |
| 364 | if (ctl == PU_HUE_CONTROL) |
| 365 | val = port->ctl_hue; |
| 366 | else |
| 367 | if (ctl == PU_SATURATION_CONTROL) |
| 368 | val = port->ctl_saturation; |
| 369 | else |
| 370 | if (ctl == PU_SHARPNESS_CONTROL) |
| 371 | val = port->ctl_sharpness; |
| 372 | else |
| 373 | return -EINVAL; |
| 374 | |
| 375 | dprintk(DBGLVL_ENC, "%s() unitid=0x%x ctl=%d, val=%d\n", |
| 376 | __func__, port->encunit.vsourceid, ctl, val); |
| 377 | |
| 378 | ret = saa7164_cmd_send(port->dev, port->encunit.vsourceid, SET_CUR, |
| 379 | ctl, sizeof(u16), &val); |
| 380 | if (ret != SAA_OK) |
| 381 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 382 | |
| 383 | return ret; |
| 384 | } |
| 385 | |
| 386 | int saa7164_api_get_usercontrol(struct saa7164_port *port, u8 ctl) |
| 387 | { |
| 388 | struct saa7164_dev *dev = port->dev; |
| 389 | int ret; |
| 390 | u16 val; |
| 391 | |
| 392 | ret = saa7164_cmd_send(port->dev, port->encunit.vsourceid, GET_CUR, |
| 393 | ctl, sizeof(u16), &val); |
| 394 | if (ret != SAA_OK) { |
| 395 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 396 | return ret; |
| 397 | } |
| 398 | |
| 399 | dprintk(DBGLVL_ENC, "%s() ctl=%d, val=%d\n", |
| 400 | __func__, ctl, val); |
| 401 | |
| 402 | if (ctl == PU_BRIGHTNESS_CONTROL) |
| 403 | port->ctl_brightness = val; |
| 404 | else |
| 405 | if (ctl == PU_CONTRAST_CONTROL) |
| 406 | port->ctl_contrast = val; |
| 407 | else |
| 408 | if (ctl == PU_HUE_CONTROL) |
| 409 | port->ctl_hue = val; |
| 410 | else |
| 411 | if (ctl == PU_SATURATION_CONTROL) |
| 412 | port->ctl_saturation = val; |
| 413 | else |
| 414 | if (ctl == PU_SHARPNESS_CONTROL) |
| 415 | port->ctl_sharpness = val; |
| 416 | |
| 417 | return ret; |
| 418 | } |
| 419 | |
| 420 | int saa7164_api_set_videomux(struct saa7164_port *port) |
| 421 | { |
| 422 | struct saa7164_dev *dev = port->dev; |
| 423 | u8 inputs[] = { 1, 2, 2, 2, 5, 5, 5 }; |
| 424 | int ret; |
| 425 | |
| 426 | dprintk(DBGLVL_ENC, "%s() v_mux=%d a_mux=%d\n", |
| 427 | __func__, port->mux_input, inputs[ port->mux_input - 1 ]); |
| 428 | |
| 429 | /* Audio Mute */ |
| 430 | ret = saa7164_api_audio_mute(port, 1); |
| 431 | if (ret != SAA_OK) |
| 432 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 433 | |
| 434 | /* Video Mux */ |
| 435 | ret = saa7164_cmd_send(port->dev, port->vidproc.sourceid, SET_CUR, |
| 436 | SU_INPUT_SELECT_CONTROL, sizeof(u8), &port->mux_input); |
| 437 | if (ret != SAA_OK) |
| 438 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 439 | /* Audio Mux */ |
| 440 | ret = saa7164_cmd_send(port->dev, port->audfeat.sourceid, SET_CUR, |
| 441 | SU_INPUT_SELECT_CONTROL, sizeof(u8), &inputs[ port->mux_input - 1 ]); |
| 442 | if (ret != SAA_OK) |
| 443 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 444 | /* Audio UnMute */ |
| 445 | ret = saa7164_api_audio_mute(port, 0); |
| 446 | if (ret != SAA_OK) |
| 447 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 448 | |
| 449 | return ret; |
| 450 | } |
| 451 | |
| 452 | int saa7164_api_audio_mute(struct saa7164_port *port, int mute) |
| 453 | { |
| 454 | struct saa7164_dev *dev = port->dev; |
| 455 | u8 v = mute; |
| 456 | int ret; |
| 457 | |
| 458 | dprintk(DBGLVL_API, "%s(%d)\n", __func__, mute); |
| 459 | |
| 460 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, |
| 461 | MUTE_CONTROL, sizeof(u8), &v); |
| 462 | if (ret != SAA_OK) |
| 463 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 464 | |
| 465 | return ret; |
| 466 | } |
| 467 | |
| 468 | /* 0 = silence, 0xff = full */ |
| 469 | int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level) |
| 470 | { |
| 471 | struct saa7164_dev *dev = port->dev; |
| 472 | s16 v, min, max; |
| 473 | int ret; |
| 474 | |
| 475 | dprintk(DBGLVL_API, "%s(%d)\n", __func__, level); |
| 476 | |
| 477 | /* Obtain the min/max ranges */ |
| 478 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_MIN, |
| 479 | VOLUME_CONTROL, sizeof(u16), &min); |
| 480 | if (ret != SAA_OK) |
| 481 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 482 | |
| 483 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_MAX, |
| 484 | VOLUME_CONTROL, sizeof(u16), &max); |
| 485 | if (ret != SAA_OK) |
| 486 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 487 | |
| 488 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_CUR, |
| 489 | ( 0x01 << 8) | VOLUME_CONTROL, sizeof(u16), &v); |
| 490 | if (ret != SAA_OK) |
| 491 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 492 | |
| 493 | dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v); |
| 494 | |
| 495 | v = level; |
| 496 | if (v < min) |
| 497 | v = min; |
| 498 | if (v > max) |
| 499 | v = max; |
| 500 | |
| 501 | /* Left */ |
| 502 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, |
| 503 | ( 0x01 << 8 ) | VOLUME_CONTROL, sizeof(s16), &v); |
| 504 | if (ret != SAA_OK) |
| 505 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 506 | |
| 507 | /* Right */ |
| 508 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, |
| 509 | ( 0x02 << 8 ) | VOLUME_CONTROL, sizeof(s16), &v); |
| 510 | if (ret != SAA_OK) |
| 511 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 512 | |
| 513 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, GET_CUR, |
| 514 | ( 0x01 << 8) | VOLUME_CONTROL, sizeof(u16), &v); |
| 515 | if (ret != SAA_OK) |
| 516 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 517 | |
| 518 | dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v); |
| 519 | |
| 520 | return ret; |
| 521 | } |
| 522 | |
| 523 | int saa7164_api_set_audio_std(struct saa7164_port *port) |
| 524 | { |
| 525 | struct saa7164_dev *dev = port->dev; |
| 526 | tmComResAudioDefaults_t lvl; |
| 527 | tmComResTunerStandard_t tvaudio; |
| 528 | int ret; |
| 529 | |
| 530 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 531 | |
| 532 | /* Establish default levels */ |
| 533 | lvl.ucDecoderLevel = TMHW_LEV_ADJ_DECLEV_DEFAULT; |
| 534 | lvl.ucDecoderFM_Level = TMHW_LEV_ADJ_DECLEV_DEFAULT; |
| 535 | lvl.ucMonoLevel = TMHW_LEV_ADJ_MONOLEV_DEFAULT; |
| 536 | lvl.ucNICAM_Level = TMHW_LEV_ADJ_NICLEV_DEFAULT; |
| 537 | lvl.ucSAP_Level = TMHW_LEV_ADJ_SAPLEV_DEFAULT; |
| 538 | lvl.ucADC_Level = TMHW_LEV_ADJ_ADCLEV_DEFAULT; |
| 539 | ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR, |
| 540 | AUDIO_DEFAULT_CONTROL, sizeof(tmComResAudioDefaults_t), &lvl); |
| 541 | if (ret != SAA_OK) |
| 542 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 543 | |
| 544 | /* Manually select the appropriate TV audio standard */ |
| 545 | if (port->encodernorm.id & V4L2_STD_NTSC) { |
| 546 | tvaudio.std = TU_STANDARD_NTSC_M; |
| 547 | tvaudio.country = 1; |
| 548 | } else { |
| 549 | tvaudio.std = TU_STANDARD_PAL_I; |
| 550 | tvaudio.country = 44; |
| 551 | } |
| 552 | |
| 553 | ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR, |
| 554 | TU_STANDARD_CONTROL, sizeof(tvaudio), &tvaudio); |
| 555 | if (ret != SAA_OK) |
| 556 | printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n", __func__, ret); |
| 557 | return ret; |
| 558 | } |
| 559 | |
| 560 | int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect) |
| 561 | { |
| 562 | struct saa7164_dev *dev = port->dev; |
| 563 | tmComResTunerStandardAuto_t p; |
| 564 | int ret; |
| 565 | |
| 566 | dprintk(DBGLVL_API, "%s(%d)\n", __func__, autodetect); |
| 567 | |
| 568 | /* Disable TV Audio autodetect if not already set (buggy) */ |
| 569 | if (autodetect) |
| 570 | p.mode = TU_STANDARD_AUTO; |
| 571 | else |
| 572 | p.mode = TU_STANDARD_MANUAL; |
| 573 | ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR, |
| 574 | TU_STANDARD_AUTO_CONTROL, sizeof(p), &p); |
| 575 | if (ret != SAA_OK) |
| 576 | printk(KERN_ERR "%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n", __func__, ret); |
| 577 | |
| 578 | return ret; |
| 579 | } |
| 580 | |
| 581 | int saa7164_api_get_videomux(struct saa7164_port *port) |
| 582 | { |
| 583 | struct saa7164_dev *dev = port->dev; |
| 584 | int ret; |
| 585 | |
| 586 | ret = saa7164_cmd_send(port->dev, port->vidproc.sourceid, GET_CUR, |
| 587 | SU_INPUT_SELECT_CONTROL, sizeof(u8), &port->mux_input); |
| 588 | if (ret != SAA_OK) |
| 589 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 590 | |
| 591 | dprintk(DBGLVL_ENC, "%s() v_mux=%d\n", |
| 592 | __func__, port->mux_input); |
| 593 | |
| 594 | return ret; |
| 595 | } |
| 596 | |
| 597 | int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val) |
| 598 | { |
| 599 | struct saa7164_dev *dev = port->dev; |
| 600 | |
| 601 | u16 len = 0; |
| 602 | u8 buf[256]; |
| 603 | int ret; |
| 604 | u8 mas; |
| 605 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 606 | dprintk(DBGLVL_API, "%s(nr=%d type=%d val=%x)\n", __func__, |
| 607 | port->nr, port->type, val); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 608 | |
| 609 | if (port->nr == 0) |
| 610 | mas = 0xd0; |
| 611 | else |
| 612 | mas = 0xe0; |
| 613 | |
| 614 | memset(buf, 0, sizeof(buf)); |
| 615 | |
| 616 | buf[0x00] = 0x04; |
| 617 | buf[0x01] = 0x00; |
| 618 | buf[0x02] = 0x00; |
| 619 | buf[0x03] = 0x00; |
| 620 | |
| 621 | buf[0x04] = 0x04; |
| 622 | buf[0x05] = 0x00; |
| 623 | buf[0x06] = 0x00; |
| 624 | buf[0x07] = 0x00; |
| 625 | |
| 626 | buf[0x08] = reg; |
| 627 | buf[0x09] = 0x26; |
| 628 | buf[0x0a] = mas; |
| 629 | buf[0x0b] = 0xb0; |
| 630 | |
| 631 | buf[0x0c] = val; |
| 632 | buf[0x0d] = 0x00; |
| 633 | buf[0x0e] = 0x00; |
| 634 | buf[0x0f] = 0x00; |
| 635 | |
| 636 | ret = saa7164_cmd_send(dev, port->ifunit.unitid, GET_LEN, |
| 637 | EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| 638 | if (ret != SAA_OK) { |
| 639 | printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| 640 | return -EIO; |
| 641 | } |
| 642 | |
| 643 | ret = saa7164_cmd_send(dev, port->ifunit.unitid, SET_CUR, |
| 644 | EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| 645 | if (ret != SAA_OK) |
| 646 | printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| 647 | |
| 648 | //saa7164_dumphex16(dev, buf, 16); |
| 649 | |
| 650 | return ret == SAA_OK ? 0 : -EIO; |
| 651 | } |
| 652 | |
| 653 | /* Disable the IF block AGC controls */ |
| 654 | int saa7164_api_configure_dif(struct saa7164_port *port, u32 std) |
| 655 | { |
| 656 | struct saa7164_dev *dev = port->dev; |
| 657 | int ret = 0; |
| 658 | u8 agc_disable; |
| 659 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 660 | dprintk(DBGLVL_API, "%s(nr=%d, 0x%x)\n", __func__, port->nr, std); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 661 | |
| 662 | if (std & V4L2_STD_NTSC) { |
| 663 | dprintk(DBGLVL_API, " NTSC\n"); |
| 664 | saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ |
| 665 | agc_disable = 0; |
| 666 | } else if (std & V4L2_STD_PAL_I) { |
| 667 | dprintk(DBGLVL_API, " PAL-I\n"); |
| 668 | saa7164_api_set_dif(port, 0x00, 0x08); /* Video Standard */ |
| 669 | agc_disable = 0; |
| 670 | } else if (std & V4L2_STD_PAL_M) { |
| 671 | dprintk(DBGLVL_API, " PAL-M\n"); |
| 672 | saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ |
| 673 | agc_disable = 0; |
| 674 | } else if (std & V4L2_STD_PAL_N) { |
| 675 | dprintk(DBGLVL_API, " PAL-N\n"); |
| 676 | saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ |
| 677 | agc_disable = 0; |
| 678 | } else if (std & V4L2_STD_PAL_Nc) { |
| 679 | dprintk(DBGLVL_API, " PAL-Nc\n"); |
| 680 | saa7164_api_set_dif(port, 0x00, 0x01); /* Video Standard */ |
| 681 | agc_disable = 0; |
| 682 | } else if (std & V4L2_STD_PAL_B) { |
| 683 | dprintk(DBGLVL_API, " PAL-B\n"); |
| 684 | saa7164_api_set_dif(port, 0x00, 0x02); /* Video Standard */ |
| 685 | agc_disable = 0; |
| 686 | } else if (std & V4L2_STD_PAL_DK) { |
| 687 | dprintk(DBGLVL_API, " PAL-DK\n"); |
| 688 | saa7164_api_set_dif(port, 0x00, 0x10); /* Video Standard */ |
| 689 | agc_disable = 0; |
| 690 | } else if (std & V4L2_STD_SECAM_L) { |
| 691 | dprintk(DBGLVL_API, " SECAM-L\n"); |
| 692 | saa7164_api_set_dif(port, 0x00, 0x20); /* Video Standard */ |
| 693 | agc_disable = 0; |
| 694 | } else { |
| 695 | /* Unknown standard, assume DTV */ |
| 696 | dprintk(DBGLVL_API, " Unknown (assuming DTV)\n"); |
| 697 | saa7164_api_set_dif(port, 0x00, 0x80); /* Undefined Video Standard */ |
| 698 | agc_disable = 1; |
| 699 | } |
| 700 | |
| 701 | saa7164_api_set_dif(port, 0x48, 0xa0); /* AGC Functions 1 */ |
| 702 | saa7164_api_set_dif(port, 0xc0, agc_disable); /* AGC Output Disable */ |
| 703 | saa7164_api_set_dif(port, 0x7c, 0x04); /* CVBS EQ */ |
| 704 | saa7164_api_set_dif(port, 0x04, 0x01); /* Active */ |
| 705 | msleep(100); |
| 706 | saa7164_api_set_dif(port, 0x04, 0x00); /* Active (again) */ |
| 707 | msleep(100); |
| 708 | |
| 709 | return ret; |
| 710 | } |
| 711 | |
| 712 | /* Ensure the dif is in the correct state for the operating mode |
| 713 | * (analog / dtv). We only configure the diff through the analog encoder |
| 714 | * so when we're in digital mode we need to find the appropriate encoder |
| 715 | * and use it to configure the DIF. |
| 716 | */ |
| 717 | int saa7164_api_initialize_dif(struct saa7164_port *port) |
| 718 | { |
| 719 | struct saa7164_dev *dev = port->dev; |
| 720 | struct saa7164_port *p = 0; |
| 721 | int ret = -EINVAL; |
| 722 | u32 std = 0; |
| 723 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 724 | dprintk(DBGLVL_API, "%s(nr=%d type=%d)\n", __func__, |
| 725 | port->nr, port->type); |
| 726 | |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 727 | if (port->type == SAA7164_MPEG_ENCODER) { |
| 728 | /* Pick any analog standard to init the diff. |
| 729 | * we'll come back during encoder_init' |
| 730 | * and set the correct standard if requried. |
| 731 | */ |
| 732 | std = V4L2_STD_NTSC; |
| 733 | } else |
| 734 | if (port->type == SAA7164_MPEG_DVB) { |
| 735 | if (port->nr == SAA7164_PORT_TS1) |
| 736 | p = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 737 | else |
| 738 | p = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 739 | } else |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 740 | if (port->type == SAA7164_MPEG_VBI) { |
| 741 | std = V4L2_STD_NTSC; |
| 742 | if (port->nr == SAA7164_PORT_VBI1) |
| 743 | p = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 744 | else |
| 745 | p = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 746 | } else |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 747 | BUG(); |
| 748 | |
| 749 | if (p) |
| 750 | ret = saa7164_api_configure_dif(p, std); |
| 751 | |
| 752 | return ret; |
| 753 | } |
| 754 | |
Steven Toth | add3f58 | 2010-07-31 14:43:07 -0300 | [diff] [blame] | 755 | int saa7164_api_transition_port(struct saa7164_port *port, u8 mode) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 756 | { |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 757 | struct saa7164_dev *dev = port->dev; |
| 758 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 759 | int ret; |
| 760 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 761 | dprintk(DBGLVL_API, "%s(nr=%d unitid=0x%x,%d)\n", |
| 762 | __func__, port->nr, port->hwcfg.unitid, mode); |
| 763 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 764 | ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, |
| 765 | SAA_STATE_CONTROL, sizeof(mode), &mode); |
| 766 | if (ret != SAA_OK) |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 767 | printk(KERN_ERR "%s(portnr %d unitid 0x%x) error, ret = 0x%x\n", |
| 768 | __func__, port->nr, port->hwcfg.unitid, ret); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 769 | |
| 770 | return ret; |
| 771 | } |
| 772 | |
| 773 | int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) |
| 774 | { |
| 775 | int ret; |
| 776 | |
| 777 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 778 | GET_FW_VERSION_CONTROL, sizeof(u32), version); |
| 779 | if (ret != SAA_OK) |
| 780 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 781 | |
| 782 | return ret; |
| 783 | } |
| 784 | |
| 785 | int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) |
| 786 | { |
| 787 | u8 reg[] = { 0x0f, 0x00 }; |
| 788 | |
| 789 | if (buflen < 128) |
| 790 | return -ENOMEM; |
| 791 | |
| 792 | /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ |
| 793 | /* TODO: Pull the details from the boards struct */ |
| 794 | return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), |
| 795 | ®[0], 128, buf); |
| 796 | } |
| 797 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 798 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 799 | int saa7164_api_configure_port_vbi(struct saa7164_dev *dev, |
| 800 | struct saa7164_port *port) |
| 801 | { |
| 802 | tmComResVBIFormatDescrHeader_t *fmt = &port->vbi_fmt_ntsc; |
| 803 | |
| 804 | dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", fmt->bFormatIndex); |
| 805 | dprintk(DBGLVL_API, " VideoStandard = 0x%x\n", fmt->VideoStandard); |
| 806 | dprintk(DBGLVL_API, " StartLine = %d\n", fmt->StartLine); |
| 807 | dprintk(DBGLVL_API, " EndLine = %d\n", fmt->EndLine); |
| 808 | dprintk(DBGLVL_API, " FieldRate = %d\n", fmt->FieldRate); |
| 809 | dprintk(DBGLVL_API, " bNumLines = %d\n", fmt->bNumLines); |
Steven Toth | e48836b | 2010-07-31 16:08:52 -0300 | [diff] [blame] | 810 | |
| 811 | /* Cache the hardware configuration in the port */ |
| 812 | |
| 813 | port->bufcounter = port->hwcfg.BARLocation; |
| 814 | port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); |
| 815 | port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); |
| 816 | port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); |
| 817 | port->bufptr32l = port->hwcfg.BARLocation + |
| 818 | (4 * sizeof(u32)) + |
| 819 | (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); |
| 820 | port->bufptr32h = port->hwcfg.BARLocation + |
| 821 | (4 * sizeof(u32)) + |
| 822 | (sizeof(u32) * port->hwcfg.buffercount); |
| 823 | port->bufptr64 = port->hwcfg.BARLocation + |
| 824 | (4 * sizeof(u32)) + |
| 825 | (sizeof(u32) * port->hwcfg.buffercount); |
| 826 | dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", |
| 827 | port->hwcfg.BARLocation); |
| 828 | |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 829 | dprintk(DBGLVL_API, " = VS_FORMAT_VBI (becomes dev->en[%d])\n", |
| 830 | port->nr); |
| 831 | |
| 832 | return 0; |
| 833 | } |
| 834 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 835 | int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, |
Steven Toth | add3f58 | 2010-07-31 14:43:07 -0300 | [diff] [blame] | 836 | struct saa7164_port *port, |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 837 | tmComResTSFormatDescrHeader_t *tsfmt) |
| 838 | { |
| 839 | dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); |
| 840 | dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); |
| 841 | dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); |
| 842 | dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); |
| 843 | dprintk(DBGLVL_API, " bguid = (....)\n"); |
| 844 | |
| 845 | /* Cache the hardware configuration in the port */ |
| 846 | |
| 847 | port->bufcounter = port->hwcfg.BARLocation; |
| 848 | port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); |
| 849 | port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); |
| 850 | port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); |
| 851 | port->bufptr32l = port->hwcfg.BARLocation + |
| 852 | (4 * sizeof(u32)) + |
| 853 | (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); |
| 854 | port->bufptr32h = port->hwcfg.BARLocation + |
| 855 | (4 * sizeof(u32)) + |
| 856 | (sizeof(u32) * port->hwcfg.buffercount); |
| 857 | port->bufptr64 = port->hwcfg.BARLocation + |
| 858 | (4 * sizeof(u32)) + |
| 859 | (sizeof(u32) * port->hwcfg.buffercount); |
| 860 | dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", |
| 861 | port->hwcfg.BARLocation); |
| 862 | |
| 863 | dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", |
| 864 | port->nr); |
| 865 | |
| 866 | return 0; |
| 867 | } |
| 868 | |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 869 | int saa7164_api_configure_port_mpeg2ps(struct saa7164_dev *dev, |
| 870 | struct saa7164_port *port, |
| 871 | tmComResPSFormatDescrHeader_t *fmt) |
| 872 | { |
| 873 | dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", fmt->bFormatIndex); |
| 874 | dprintk(DBGLVL_API, " wPacketLength= 0x%x\n", fmt->wPacketLength); |
| 875 | dprintk(DBGLVL_API, " wPackLength= 0x%x\n", fmt->wPackLength); |
| 876 | dprintk(DBGLVL_API, " bPackDataType= 0x%x\n", fmt->bPackDataType); |
| 877 | |
| 878 | /* Cache the hardware configuration in the port */ |
| 879 | /* TODO: CHECK THIS in the port config */ |
| 880 | port->bufcounter = port->hwcfg.BARLocation; |
| 881 | port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); |
| 882 | port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); |
| 883 | port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); |
| 884 | port->bufptr32l = port->hwcfg.BARLocation + |
| 885 | (4 * sizeof(u32)) + |
| 886 | (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); |
| 887 | port->bufptr32h = port->hwcfg.BARLocation + |
| 888 | (4 * sizeof(u32)) + |
| 889 | (sizeof(u32) * port->hwcfg.buffercount); |
| 890 | port->bufptr64 = port->hwcfg.BARLocation + |
| 891 | (4 * sizeof(u32)) + |
| 892 | (sizeof(u32) * port->hwcfg.buffercount); |
| 893 | dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", |
| 894 | port->hwcfg.BARLocation); |
| 895 | |
| 896 | dprintk(DBGLVL_API, " = VS_FORMAT_MPEGPS (becomes dev->enc[%d])\n", |
| 897 | port->nr); |
| 898 | |
| 899 | return 0; |
| 900 | } |
| 901 | |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 902 | int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) |
| 903 | { |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 904 | struct saa7164_port *tsport = 0; |
| 905 | struct saa7164_port *encport = 0; |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 906 | struct saa7164_port *vbiport = 0; |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 907 | u32 idx, next_offset; |
| 908 | int i; |
| 909 | tmComResDescrHeader_t *hdr, *t; |
| 910 | tmComResExtDevDescrHeader_t *exthdr; |
| 911 | tmComResPathDescrHeader_t *pathhdr; |
| 912 | tmComResAntTermDescrHeader_t *anttermhdr; |
| 913 | tmComResTunerDescrHeader_t *tunerunithdr; |
| 914 | tmComResDMATermDescrHeader_t *vcoutputtermhdr; |
| 915 | tmComResTSFormatDescrHeader_t *tsfmt; |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 916 | tmComResPSFormatDescrHeader_t *psfmt; |
| 917 | tmComResSelDescrHeader_t *psel; |
| 918 | tmComResProcDescrHeader_t *pdh; |
| 919 | tmComResAFeatureDescrHeader_t *afd; |
| 920 | tmComResEncoderDescrHeader_t *edh; |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 921 | tmComResVBIFormatDescrHeader_t *vbifmt; |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 922 | u32 currpath = 0; |
| 923 | |
| 924 | dprintk(DBGLVL_API, |
Steven Toth | 207b42c | 2009-05-09 21:30:05 -0300 | [diff] [blame] | 925 | "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n", |
| 926 | __func__, len, (u32)sizeof(tmComResDescrHeader_t)); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 927 | |
| 928 | for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { |
| 929 | |
| 930 | hdr = (tmComResDescrHeader_t *)(buf + idx); |
| 931 | |
| 932 | if (hdr->type != CS_INTERFACE) |
| 933 | return SAA_ERR_NOT_SUPPORTED; |
| 934 | |
| 935 | dprintk(DBGLVL_API, "@ 0x%x = \n", idx); |
| 936 | switch (hdr->subtype) { |
| 937 | case GENERAL_REQUEST: |
| 938 | dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); |
| 939 | break; |
| 940 | case VC_TUNER_PATH: |
| 941 | dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); |
| 942 | pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); |
| 943 | dprintk(DBGLVL_API, " pathid = 0x%x\n", |
| 944 | pathhdr->pathid); |
| 945 | currpath = pathhdr->pathid; |
| 946 | break; |
| 947 | case VC_INPUT_TERMINAL: |
| 948 | dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); |
| 949 | anttermhdr = |
| 950 | (tmComResAntTermDescrHeader_t *)(buf + idx); |
| 951 | dprintk(DBGLVL_API, " terminalid = 0x%x\n", |
| 952 | anttermhdr->terminalid); |
| 953 | dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| 954 | anttermhdr->terminaltype); |
| 955 | switch (anttermhdr->terminaltype) { |
| 956 | case ITT_ANTENNA: |
| 957 | dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| 958 | break; |
| 959 | case LINE_CONNECTOR: |
| 960 | dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| 961 | break; |
| 962 | case SPDIF_CONNECTOR: |
| 963 | dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| 964 | break; |
| 965 | case COMPOSITE_CONNECTOR: |
| 966 | dprintk(DBGLVL_API, |
| 967 | " = COMPOSITE_CONNECTOR\n"); |
| 968 | break; |
| 969 | case SVIDEO_CONNECTOR: |
| 970 | dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| 971 | break; |
| 972 | case COMPONENT_CONNECTOR: |
| 973 | dprintk(DBGLVL_API, |
| 974 | " = COMPONENT_CONNECTOR\n"); |
| 975 | break; |
| 976 | case STANDARD_DMA: |
| 977 | dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| 978 | break; |
| 979 | default: |
| 980 | dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| 981 | anttermhdr->terminaltype); |
| 982 | } |
| 983 | dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| 984 | anttermhdr->assocterminal); |
| 985 | dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| 986 | anttermhdr->iterminal); |
| 987 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 988 | anttermhdr->controlsize); |
| 989 | break; |
| 990 | case VC_OUTPUT_TERMINAL: |
| 991 | dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); |
| 992 | vcoutputtermhdr = |
| 993 | (tmComResDMATermDescrHeader_t *)(buf + idx); |
| 994 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 995 | vcoutputtermhdr->unitid); |
| 996 | dprintk(DBGLVL_API, " terminaltype = 0x%x\n", |
| 997 | vcoutputtermhdr->terminaltype); |
| 998 | switch (vcoutputtermhdr->terminaltype) { |
| 999 | case ITT_ANTENNA: |
| 1000 | dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); |
| 1001 | break; |
| 1002 | case LINE_CONNECTOR: |
| 1003 | dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); |
| 1004 | break; |
| 1005 | case SPDIF_CONNECTOR: |
| 1006 | dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); |
| 1007 | break; |
| 1008 | case COMPOSITE_CONNECTOR: |
| 1009 | dprintk(DBGLVL_API, |
| 1010 | " = COMPOSITE_CONNECTOR\n"); |
| 1011 | break; |
| 1012 | case SVIDEO_CONNECTOR: |
| 1013 | dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); |
| 1014 | break; |
| 1015 | case COMPONENT_CONNECTOR: |
| 1016 | dprintk(DBGLVL_API, |
| 1017 | " = COMPONENT_CONNECTOR\n"); |
| 1018 | break; |
| 1019 | case STANDARD_DMA: |
| 1020 | dprintk(DBGLVL_API, " = STANDARD_DMA\n"); |
| 1021 | break; |
| 1022 | default: |
| 1023 | dprintk(DBGLVL_API, " = undefined (0x%x)\n", |
| 1024 | vcoutputtermhdr->terminaltype); |
| 1025 | } |
| 1026 | dprintk(DBGLVL_API, " assocterminal= 0x%x\n", |
| 1027 | vcoutputtermhdr->assocterminal); |
| 1028 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 1029 | vcoutputtermhdr->sourceid); |
| 1030 | dprintk(DBGLVL_API, " iterminal = 0x%x\n", |
| 1031 | vcoutputtermhdr->iterminal); |
| 1032 | dprintk(DBGLVL_API, " BARLocation = 0x%x\n", |
| 1033 | vcoutputtermhdr->BARLocation); |
| 1034 | dprintk(DBGLVL_API, " flags = 0x%x\n", |
| 1035 | vcoutputtermhdr->flags); |
| 1036 | dprintk(DBGLVL_API, " interruptid = 0x%x\n", |
| 1037 | vcoutputtermhdr->interruptid); |
| 1038 | dprintk(DBGLVL_API, " buffercount = 0x%x\n", |
| 1039 | vcoutputtermhdr->buffercount); |
| 1040 | dprintk(DBGLVL_API, " metadatasize = 0x%x\n", |
| 1041 | vcoutputtermhdr->metadatasize); |
| 1042 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 1043 | vcoutputtermhdr->controlsize); |
| 1044 | dprintk(DBGLVL_API, " numformats = 0x%x\n", |
| 1045 | vcoutputtermhdr->numformats); |
| 1046 | |
| 1047 | t = (tmComResDescrHeader_t *) |
| 1048 | ((tmComResDMATermDescrHeader_t *)(buf + idx)); |
| 1049 | next_offset = idx + (vcoutputtermhdr->len); |
| 1050 | for (i = 0; i < vcoutputtermhdr->numformats; i++) { |
| 1051 | t = (tmComResDescrHeader_t *) |
| 1052 | (buf + next_offset); |
| 1053 | switch (t->subtype) { |
| 1054 | case VS_FORMAT_MPEG2TS: |
| 1055 | tsfmt = |
| 1056 | (tmComResTSFormatDescrHeader_t *)t; |
| 1057 | if (currpath == 1) |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1058 | tsport = &dev->ports[ SAA7164_PORT_TS1 ]; |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1059 | else |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1060 | tsport = &dev->ports[ SAA7164_PORT_TS2 ]; |
| 1061 | memcpy(&tsport->hwcfg, vcoutputtermhdr, |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1062 | sizeof(*vcoutputtermhdr)); |
| 1063 | saa7164_api_configure_port_mpeg2ts(dev, |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1064 | tsport, tsfmt); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1065 | break; |
| 1066 | case VS_FORMAT_MPEG2PS: |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1067 | psfmt = |
| 1068 | (tmComResPSFormatDescrHeader_t *)t; |
| 1069 | if (currpath == 1) |
| 1070 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1071 | else |
| 1072 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1073 | memcpy(&encport->hwcfg, vcoutputtermhdr, |
| 1074 | sizeof(*vcoutputtermhdr)); |
| 1075 | saa7164_api_configure_port_mpeg2ps(dev, |
| 1076 | encport, psfmt); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1077 | break; |
| 1078 | case VS_FORMAT_VBI: |
Steven Toth | e8ce2f2 | 2010-07-31 16:06:06 -0300 | [diff] [blame] | 1079 | vbifmt = |
| 1080 | (tmComResVBIFormatDescrHeader_t *)t; |
| 1081 | if (currpath == 1) |
| 1082 | vbiport = &dev->ports[ SAA7164_PORT_VBI1 ]; |
| 1083 | else |
| 1084 | vbiport = &dev->ports[ SAA7164_PORT_VBI2 ]; |
| 1085 | memcpy(&vbiport->hwcfg, vcoutputtermhdr, |
| 1086 | sizeof(*vcoutputtermhdr)); |
| 1087 | memcpy(&vbiport->vbi_fmt_ntsc, vbifmt, sizeof(*vbifmt)); |
| 1088 | saa7164_api_configure_port_vbi(dev, |
| 1089 | vbiport); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1090 | break; |
| 1091 | case VS_FORMAT_RDS: |
| 1092 | dprintk(DBGLVL_API, |
| 1093 | " = VS_FORMAT_RDS\n"); |
| 1094 | break; |
| 1095 | case VS_FORMAT_UNCOMPRESSED: |
| 1096 | dprintk(DBGLVL_API, |
| 1097 | " = VS_FORMAT_UNCOMPRESSED\n"); |
| 1098 | break; |
| 1099 | case VS_FORMAT_TYPE: |
| 1100 | dprintk(DBGLVL_API, |
| 1101 | " = VS_FORMAT_TYPE\n"); |
| 1102 | break; |
| 1103 | default: |
| 1104 | dprintk(DBGLVL_API, |
| 1105 | " = undefined (0x%x)\n", |
| 1106 | t->subtype); |
| 1107 | } |
| 1108 | next_offset += t->len; |
| 1109 | } |
| 1110 | |
| 1111 | break; |
| 1112 | case TUNER_UNIT: |
| 1113 | dprintk(DBGLVL_API, " TUNER_UNIT\n"); |
| 1114 | tunerunithdr = |
| 1115 | (tmComResTunerDescrHeader_t *)(buf + idx); |
| 1116 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 1117 | tunerunithdr->unitid); |
| 1118 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 1119 | tunerunithdr->sourceid); |
| 1120 | dprintk(DBGLVL_API, " iunit = 0x%x\n", |
| 1121 | tunerunithdr->iunit); |
| 1122 | dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", |
| 1123 | tunerunithdr->tuningstandards); |
| 1124 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 1125 | tunerunithdr->controlsize); |
| 1126 | dprintk(DBGLVL_API, " controls = 0x%x\n", |
| 1127 | tunerunithdr->controls); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1128 | |
| 1129 | if (tunerunithdr->unitid == tunerunithdr->iunit) { |
| 1130 | if (currpath == 1) |
| 1131 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1132 | else |
| 1133 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1134 | memcpy(&encport->tunerunit, tunerunithdr, |
| 1135 | sizeof(tmComResTunerDescrHeader_t)); |
| 1136 | dprintk(DBGLVL_API, " (becomes dev->enc[%d] tuner)\n", encport->nr); |
| 1137 | } |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1138 | break; |
| 1139 | case VC_SELECTOR_UNIT: |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1140 | psel = (tmComResSelDescrHeader_t *)(buf + idx); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1141 | dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1142 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 1143 | psel->unitid); |
| 1144 | dprintk(DBGLVL_API, " nrinpins = 0x%x\n", |
| 1145 | psel->nrinpins); |
| 1146 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 1147 | psel->sourceid); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1148 | break; |
| 1149 | case VC_PROCESSING_UNIT: |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1150 | pdh = (tmComResProcDescrHeader_t *)(buf + idx); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1151 | dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1152 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 1153 | pdh->unitid); |
| 1154 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 1155 | pdh->sourceid); |
| 1156 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 1157 | pdh->controlsize); |
| 1158 | if (pdh->controlsize == 0x04) { |
| 1159 | if (currpath == 1) |
| 1160 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1161 | else |
| 1162 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1163 | memcpy(&encport->vidproc, pdh, |
| 1164 | sizeof(tmComResProcDescrHeader_t)); |
| 1165 | dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", encport->nr); |
| 1166 | } |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1167 | break; |
| 1168 | case FEATURE_UNIT: |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1169 | afd = (tmComResAFeatureDescrHeader_t *)(buf + idx); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1170 | dprintk(DBGLVL_API, " FEATURE_UNIT\n"); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1171 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 1172 | afd->unitid); |
| 1173 | dprintk(DBGLVL_API, " sourceid = 0x%x\n", |
| 1174 | afd->sourceid); |
| 1175 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 1176 | afd->controlsize); |
| 1177 | if (currpath == 1) |
| 1178 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1179 | else |
| 1180 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1181 | memcpy(&encport->audfeat, afd, |
| 1182 | sizeof(tmComResAFeatureDescrHeader_t)); |
| 1183 | dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", encport->nr); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1184 | break; |
| 1185 | case ENCODER_UNIT: |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1186 | edh = (tmComResEncoderDescrHeader_t *)(buf + idx); |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1187 | dprintk(DBGLVL_API, " ENCODER_UNIT\n"); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1188 | dprintk(DBGLVL_API, " subtype = 0x%x\n", edh->subtype); |
| 1189 | dprintk(DBGLVL_API, " unitid = 0x%x\n", edh->unitid); |
| 1190 | dprintk(DBGLVL_API, " vsourceid = 0x%x\n", edh->vsourceid); |
| 1191 | dprintk(DBGLVL_API, " asourceid = 0x%x\n", edh->asourceid); |
| 1192 | dprintk(DBGLVL_API, " iunit = 0x%x\n", edh->iunit); |
| 1193 | if (edh->iunit == edh->unitid) { |
| 1194 | if (currpath == 1) |
| 1195 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1196 | else |
| 1197 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1198 | memcpy(&encport->encunit, edh, |
| 1199 | sizeof(tmComResEncoderDescrHeader_t)); |
| 1200 | dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", encport->nr); |
| 1201 | } |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1202 | break; |
| 1203 | case EXTENSION_UNIT: |
| 1204 | dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); |
| 1205 | exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); |
| 1206 | dprintk(DBGLVL_API, " unitid = 0x%x\n", |
| 1207 | exthdr->unitid); |
| 1208 | dprintk(DBGLVL_API, " deviceid = 0x%x\n", |
| 1209 | exthdr->deviceid); |
| 1210 | dprintk(DBGLVL_API, " devicetype = 0x%x\n", |
| 1211 | exthdr->devicetype); |
| 1212 | if (exthdr->devicetype & 0x1) |
| 1213 | dprintk(DBGLVL_API, " = Decoder Device\n"); |
| 1214 | if (exthdr->devicetype & 0x2) |
| 1215 | dprintk(DBGLVL_API, " = GPIO Source\n"); |
| 1216 | if (exthdr->devicetype & 0x4) |
| 1217 | dprintk(DBGLVL_API, " = Video Decoder\n"); |
| 1218 | if (exthdr->devicetype & 0x8) |
| 1219 | dprintk(DBGLVL_API, " = Audio Decoder\n"); |
| 1220 | if (exthdr->devicetype & 0x20) |
| 1221 | dprintk(DBGLVL_API, " = Crossbar\n"); |
| 1222 | if (exthdr->devicetype & 0x40) |
| 1223 | dprintk(DBGLVL_API, " = Tuner\n"); |
| 1224 | if (exthdr->devicetype & 0x80) |
| 1225 | dprintk(DBGLVL_API, " = IF PLL\n"); |
| 1226 | if (exthdr->devicetype & 0x100) |
| 1227 | dprintk(DBGLVL_API, " = Demodulator\n"); |
| 1228 | if (exthdr->devicetype & 0x200) |
| 1229 | dprintk(DBGLVL_API, " = RDS Decoder\n"); |
| 1230 | if (exthdr->devicetype & 0x400) |
| 1231 | dprintk(DBGLVL_API, " = Encoder\n"); |
| 1232 | if (exthdr->devicetype & 0x800) |
| 1233 | dprintk(DBGLVL_API, " = IR Decoder\n"); |
| 1234 | if (exthdr->devicetype & 0x1000) |
| 1235 | dprintk(DBGLVL_API, " = EEPROM\n"); |
| 1236 | if (exthdr->devicetype & 0x2000) |
| 1237 | dprintk(DBGLVL_API, |
| 1238 | " = VBI Decoder\n"); |
| 1239 | if (exthdr->devicetype & 0x10000) |
| 1240 | dprintk(DBGLVL_API, |
| 1241 | " = Streaming Device\n"); |
| 1242 | if (exthdr->devicetype & 0x20000) |
| 1243 | dprintk(DBGLVL_API, |
| 1244 | " = DRM Device\n"); |
| 1245 | if (exthdr->devicetype & 0x40000000) |
| 1246 | dprintk(DBGLVL_API, |
| 1247 | " = Generic Device\n"); |
| 1248 | if (exthdr->devicetype & 0x80000000) |
| 1249 | dprintk(DBGLVL_API, |
| 1250 | " = Config Space Device\n"); |
| 1251 | dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", |
| 1252 | exthdr->numgpiopins); |
| 1253 | dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", |
| 1254 | exthdr->numgpiogroups); |
| 1255 | dprintk(DBGLVL_API, " controlsize = 0x%x\n", |
| 1256 | exthdr->controlsize); |
Steven Toth | 7615e43 | 2010-07-31 14:44:53 -0300 | [diff] [blame] | 1257 | if (exthdr->devicetype & 0x80) { |
| 1258 | if (currpath == 1) |
| 1259 | encport = &dev->ports[ SAA7164_PORT_ENC1 ]; |
| 1260 | else |
| 1261 | encport = &dev->ports[ SAA7164_PORT_ENC2 ]; |
| 1262 | memcpy(&encport->ifunit, exthdr, |
| 1263 | sizeof(tmComResExtDevDescrHeader_t)); |
| 1264 | dprintk(DBGLVL_API, " (becomes dev->enc[%d])\n", encport->nr); |
| 1265 | } |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1266 | break; |
| 1267 | case PVC_INFRARED_UNIT: |
| 1268 | dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); |
| 1269 | break; |
| 1270 | case DRM_UNIT: |
| 1271 | dprintk(DBGLVL_API, " DRM_UNIT\n"); |
| 1272 | break; |
| 1273 | default: |
| 1274 | dprintk(DBGLVL_API, "default %d\n", hdr->subtype); |
| 1275 | } |
| 1276 | |
| 1277 | dprintk(DBGLVL_API, " 1.%x\n", hdr->len); |
| 1278 | dprintk(DBGLVL_API, " 2.%x\n", hdr->type); |
| 1279 | dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); |
| 1280 | dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); |
| 1281 | |
| 1282 | idx += hdr->len; |
| 1283 | } |
| 1284 | |
| 1285 | return 0; |
| 1286 | } |
| 1287 | |
| 1288 | int saa7164_api_enum_subdevs(struct saa7164_dev *dev) |
| 1289 | { |
| 1290 | int ret; |
| 1291 | u32 buflen = 0; |
| 1292 | u8 *buf; |
| 1293 | |
| 1294 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 1295 | |
| 1296 | /* Get the total descriptor length */ |
| 1297 | ret = saa7164_cmd_send(dev, 0, GET_LEN, |
| 1298 | GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); |
| 1299 | if (ret != SAA_OK) |
| 1300 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 1301 | |
| 1302 | dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", |
| 1303 | __func__, buflen); |
| 1304 | |
| 1305 | /* Allocate enough storage for all of the descs */ |
| 1306 | buf = kzalloc(buflen, GFP_KERNEL); |
| 1307 | if (buf == NULL) |
| 1308 | return SAA_ERR_NO_RESOURCES; |
| 1309 | |
| 1310 | /* Retrieve them */ |
| 1311 | ret = saa7164_cmd_send(dev, 0, GET_CUR, |
| 1312 | GET_DESCRIPTORS_CONTROL, buflen, buf); |
| 1313 | if (ret != SAA_OK) { |
| 1314 | printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); |
| 1315 | goto out; |
| 1316 | } |
| 1317 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 1318 | if (saa_debug & DBGLVL_API) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1319 | saa7164_dumphex16(dev, buf, (buflen/16)*16); |
| 1320 | |
| 1321 | saa7164_api_dump_subdevs(dev, buf, buflen); |
| 1322 | |
| 1323 | out: |
| 1324 | kfree(buf); |
| 1325 | return ret; |
| 1326 | } |
| 1327 | |
| 1328 | int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, |
| 1329 | u32 datalen, u8 *data) |
| 1330 | { |
| 1331 | struct saa7164_dev *dev = bus->dev; |
| 1332 | u16 len = 0; |
| 1333 | int unitid; |
| 1334 | u32 regval; |
| 1335 | u8 buf[256]; |
| 1336 | int ret; |
| 1337 | |
| 1338 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 1339 | |
| 1340 | if (reglen > 4) |
| 1341 | return -EIO; |
| 1342 | |
| 1343 | if (reglen == 1) |
| 1344 | regval = *(reg); |
| 1345 | else |
| 1346 | if (reglen == 2) |
| 1347 | regval = ((*(reg) << 8) || *(reg+1)); |
| 1348 | else |
| 1349 | if (reglen == 3) |
| 1350 | regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); |
| 1351 | else |
| 1352 | if (reglen == 4) |
| 1353 | regval = ((*(reg) << 24) | (*(reg+1) << 16) | |
| 1354 | (*(reg+2) << 8) | *(reg+3)); |
| 1355 | |
| 1356 | /* Prepare the send buffer */ |
| 1357 | /* Bytes 00-03 source register length |
| 1358 | * 04-07 source bytes to read |
| 1359 | * 08... register address |
| 1360 | */ |
| 1361 | memset(buf, 0, sizeof(buf)); |
| 1362 | memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); |
| 1363 | *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| 1364 | *((u32 *)(buf + 1 * sizeof(u32))) = datalen; |
| 1365 | |
| 1366 | unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| 1367 | if (unitid < 0) { |
| 1368 | printk(KERN_ERR |
| 1369 | "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| 1370 | __func__, addr); |
| 1371 | return -EIO; |
| 1372 | } |
| 1373 | |
| 1374 | ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| 1375 | EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| 1376 | if (ret != SAA_OK) { |
| 1377 | printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| 1378 | return -EIO; |
| 1379 | } |
| 1380 | |
| 1381 | dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| 1382 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 1383 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1384 | saa7164_dumphex16(dev, buf, 2 * 16); |
| 1385 | |
| 1386 | ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, |
| 1387 | EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| 1388 | if (ret != SAA_OK) |
| 1389 | printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| 1390 | else { |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 1391 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1392 | saa7164_dumphex16(dev, buf, sizeof(buf)); |
| 1393 | memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); |
| 1394 | } |
| 1395 | |
| 1396 | return ret == SAA_OK ? 0 : -EIO; |
| 1397 | } |
| 1398 | |
| 1399 | /* For a given 8 bit i2c address device, write the buffer */ |
| 1400 | int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, |
| 1401 | u8 *data) |
| 1402 | { |
| 1403 | struct saa7164_dev *dev = bus->dev; |
| 1404 | u16 len = 0; |
| 1405 | int unitid; |
| 1406 | int reglen; |
| 1407 | u8 buf[256]; |
| 1408 | int ret; |
| 1409 | |
| 1410 | dprintk(DBGLVL_API, "%s()\n", __func__); |
| 1411 | |
| 1412 | if ((datalen == 0) || (datalen > 232)) |
| 1413 | return -EIO; |
| 1414 | |
| 1415 | memset(buf, 0, sizeof(buf)); |
| 1416 | |
| 1417 | unitid = saa7164_i2caddr_to_unitid(bus, addr); |
| 1418 | if (unitid < 0) { |
| 1419 | printk(KERN_ERR |
| 1420 | "%s() error, cannot translate regaddr 0x%x to unitid\n", |
| 1421 | __func__, addr); |
| 1422 | return -EIO; |
| 1423 | } |
| 1424 | |
| 1425 | reglen = saa7164_i2caddr_to_reglen(bus, addr); |
Roel Kluin | ad69551 | 2010-01-03 14:04:42 -0300 | [diff] [blame] | 1426 | if (reglen < 0) { |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1427 | printk(KERN_ERR |
| 1428 | "%s() error, cannot translate regaddr to reglen\n", |
| 1429 | __func__); |
| 1430 | return -EIO; |
| 1431 | } |
| 1432 | |
| 1433 | ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, |
| 1434 | EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); |
| 1435 | if (ret != SAA_OK) { |
| 1436 | printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); |
| 1437 | return -EIO; |
| 1438 | } |
| 1439 | |
| 1440 | dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); |
| 1441 | |
| 1442 | /* Prepare the send buffer */ |
| 1443 | /* Bytes 00-03 dest register length |
| 1444 | * 04-07 dest bytes to write |
| 1445 | * 08... register address |
| 1446 | */ |
| 1447 | *((u32 *)(buf + 0 * sizeof(u32))) = reglen; |
| 1448 | *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; |
| 1449 | memcpy((buf + 2 * sizeof(u32)), data, datalen); |
| 1450 | |
Ingo Molnar | b1912a85 | 2009-09-21 15:23:45 -0300 | [diff] [blame] | 1451 | if (saa_debug & DBGLVL_I2C) |
Steven Toth | 443c1228 | 2009-05-09 21:17:28 -0300 | [diff] [blame] | 1452 | saa7164_dumphex16(dev, buf, sizeof(buf)); |
| 1453 | |
| 1454 | ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, |
| 1455 | EXU_REGISTER_ACCESS_CONTROL, len, &buf); |
| 1456 | if (ret != SAA_OK) |
| 1457 | printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); |
| 1458 | |
| 1459 | return ret == SAA_OK ? 0 : -EIO; |
| 1460 | } |
| 1461 | |
| 1462 | |
| 1463 | int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, |
| 1464 | u8 pin, u8 state) |
| 1465 | { |
| 1466 | int ret; |
| 1467 | tmComResGPIO_t t; |
| 1468 | |
| 1469 | dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", |
| 1470 | __func__, unitid, pin, state); |
| 1471 | |
| 1472 | if ((pin > 7) || (state > 2)) |
| 1473 | return SAA_ERR_BAD_PARAMETER; |
| 1474 | |
| 1475 | t.pin = pin; |
| 1476 | t.state = state; |
| 1477 | |
| 1478 | ret = saa7164_cmd_send(dev, unitid, SET_CUR, |
| 1479 | EXU_GPIO_CONTROL, sizeof(t), &t); |
| 1480 | if (ret != SAA_OK) |
| 1481 | printk(KERN_ERR "%s() error, ret = 0x%x\n", |
| 1482 | __func__, ret); |
| 1483 | |
| 1484 | return ret; |
| 1485 | } |
| 1486 | |
| 1487 | int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| 1488 | u8 pin) |
| 1489 | { |
| 1490 | return saa7164_api_modify_gpio(dev, unitid, pin, 1); |
| 1491 | } |
| 1492 | |
| 1493 | int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, |
| 1494 | u8 pin) |
| 1495 | { |
| 1496 | return saa7164_api_modify_gpio(dev, unitid, pin, 0); |
| 1497 | } |
| 1498 | |
| 1499 | |
| 1500 | |