| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * linux/arch/arm/mach-omap2/usb-ehci.c | 
|  | 3 | * | 
|  | 4 | * This file will contain the board specific details for the | 
|  | 5 | * Synopsys EHCI host controller on OMAP3430 | 
|  | 6 | * | 
|  | 7 | * Copyright (C) 2007 Texas Instruments | 
|  | 8 | * Author: Vikram Pandita <vikram.pandita@ti.com> | 
|  | 9 | * | 
|  | 10 | * Generalization by: | 
|  | 11 | * Felipe Balbi <felipe.balbi@nokia.com> | 
|  | 12 | * | 
|  | 13 | * This program is free software; you can redistribute it and/or modify | 
|  | 14 | * it under the terms of the GNU General Public License version 2 as | 
|  | 15 | * published by the Free Software Foundation. | 
|  | 16 | */ | 
|  | 17 |  | 
|  | 18 | #include <linux/types.h> | 
|  | 19 | #include <linux/errno.h> | 
|  | 20 | #include <linux/delay.h> | 
|  | 21 | #include <linux/platform_device.h> | 
|  | 22 | #include <linux/clk.h> | 
| Amit Kucheria | bfb0119 | 2010-06-09 13:53:05 +0300 | [diff] [blame] | 23 | #include <linux/dma-mapping.h> | 
|  | 24 |  | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 25 | #include <asm/io.h> | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 26 |  | 
|  | 27 | #include <mach/hardware.h> | 
|  | 28 | #include <mach/irqs.h> | 
|  | 29 | #include <plat/usb.h> | 
|  | 30 |  | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 31 | #include "mux.h" | 
|  | 32 |  | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 33 | #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) | 
|  | 34 |  | 
|  | 35 | static struct resource ehci_resources[] = { | 
|  | 36 | { | 
|  | 37 | .start	= OMAP34XX_EHCI_BASE, | 
|  | 38 | .end	= OMAP34XX_EHCI_BASE + SZ_1K - 1, | 
|  | 39 | .flags	= IORESOURCE_MEM, | 
|  | 40 | }, | 
|  | 41 | { | 
|  | 42 | .start	= OMAP34XX_UHH_CONFIG_BASE, | 
|  | 43 | .end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, | 
|  | 44 | .flags	= IORESOURCE_MEM, | 
|  | 45 | }, | 
|  | 46 | { | 
|  | 47 | .start	= OMAP34XX_USBTLL_BASE, | 
|  | 48 | .end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1, | 
|  | 49 | .flags	= IORESOURCE_MEM, | 
|  | 50 | }, | 
|  | 51 | {         /* general IRQ */ | 
|  | 52 | .start   = INT_34XX_EHCI_IRQ, | 
|  | 53 | .flags   = IORESOURCE_IRQ, | 
|  | 54 | } | 
|  | 55 | }; | 
|  | 56 |  | 
|  | 57 | static u64 ehci_dmamask = ~(u32)0; | 
|  | 58 | static struct platform_device ehci_device = { | 
|  | 59 | .name           = "ehci-omap", | 
|  | 60 | .id             = 0, | 
|  | 61 | .dev = { | 
|  | 62 | .dma_mask               = &ehci_dmamask, | 
|  | 63 | .coherent_dma_mask      = 0xffffffff, | 
|  | 64 | .platform_data          = NULL, | 
|  | 65 | }, | 
|  | 66 | .num_resources  = ARRAY_SIZE(ehci_resources), | 
|  | 67 | .resource       = ehci_resources, | 
|  | 68 | }; | 
|  | 69 |  | 
|  | 70 | /* MUX settings for EHCI pins */ | 
|  | 71 | /* | 
|  | 72 | * setup_ehci_io_mux - initialize IO pad mux for USBHOST | 
|  | 73 | */ | 
| Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 74 | static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 75 | { | 
|  | 76 | switch (port_mode[0]) { | 
|  | 77 | case EHCI_HCD_OMAP_MODE_PHY: | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 78 | omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); | 
|  | 79 | omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); | 
|  | 80 | omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 81 | omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 82 | omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 83 | omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 84 | omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 85 | omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 86 | omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 87 | omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 88 | omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 89 | omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 90 | break; | 
|  | 91 | case EHCI_HCD_OMAP_MODE_TLL: | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 92 | omap_mux_init_signal("hsusb1_tll_stp", | 
|  | 93 | OMAP_PIN_INPUT_PULLUP); | 
|  | 94 | omap_mux_init_signal("hsusb1_tll_clk", | 
|  | 95 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 96 | omap_mux_init_signal("hsusb1_tll_dir", | 
|  | 97 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 98 | omap_mux_init_signal("hsusb1_tll_nxt", | 
|  | 99 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 100 | omap_mux_init_signal("hsusb1_tll_data0", | 
|  | 101 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 102 | omap_mux_init_signal("hsusb1_tll_data1", | 
|  | 103 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 104 | omap_mux_init_signal("hsusb1_tll_data2", | 
|  | 105 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 106 | omap_mux_init_signal("hsusb1_tll_data3", | 
|  | 107 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 108 | omap_mux_init_signal("hsusb1_tll_data4", | 
|  | 109 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 110 | omap_mux_init_signal("hsusb1_tll_data5", | 
|  | 111 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 112 | omap_mux_init_signal("hsusb1_tll_data6", | 
|  | 113 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 114 | omap_mux_init_signal("hsusb1_tll_data7", | 
|  | 115 | OMAP_PIN_INPUT_PULLDOWN); | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 116 | break; | 
|  | 117 | case EHCI_HCD_OMAP_MODE_UNKNOWN: | 
|  | 118 | /* FALLTHROUGH */ | 
|  | 119 | default: | 
|  | 120 | break; | 
|  | 121 | } | 
|  | 122 |  | 
|  | 123 | switch (port_mode[1]) { | 
|  | 124 | case EHCI_HCD_OMAP_MODE_PHY: | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 125 | omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); | 
|  | 126 | omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); | 
|  | 127 | omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 128 | omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); | 
|  | 129 | omap_mux_init_signal("hsusb2_data0", | 
|  | 130 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 131 | omap_mux_init_signal("hsusb2_data1", | 
|  | 132 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 133 | omap_mux_init_signal("hsusb2_data2", | 
|  | 134 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 135 | omap_mux_init_signal("hsusb2_data3", | 
|  | 136 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 137 | omap_mux_init_signal("hsusb2_data4", | 
|  | 138 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 139 | omap_mux_init_signal("hsusb2_data5", | 
|  | 140 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 141 | omap_mux_init_signal("hsusb2_data6", | 
|  | 142 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 143 | omap_mux_init_signal("hsusb2_data7", | 
|  | 144 | OMAP_PIN_INPUT_PULLDOWN); | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 145 | break; | 
|  | 146 | case EHCI_HCD_OMAP_MODE_TLL: | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 147 | omap_mux_init_signal("hsusb2_tll_stp", | 
|  | 148 | OMAP_PIN_INPUT_PULLUP); | 
|  | 149 | omap_mux_init_signal("hsusb2_tll_clk", | 
|  | 150 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 151 | omap_mux_init_signal("hsusb2_tll_dir", | 
|  | 152 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 153 | omap_mux_init_signal("hsusb2_tll_nxt", | 
|  | 154 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 155 | omap_mux_init_signal("hsusb2_tll_data0", | 
|  | 156 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 157 | omap_mux_init_signal("hsusb2_tll_data1", | 
|  | 158 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 159 | omap_mux_init_signal("hsusb2_tll_data2", | 
|  | 160 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 161 | omap_mux_init_signal("hsusb2_tll_data3", | 
|  | 162 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 163 | omap_mux_init_signal("hsusb2_tll_data4", | 
|  | 164 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 165 | omap_mux_init_signal("hsusb2_tll_data5", | 
|  | 166 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 167 | omap_mux_init_signal("hsusb2_tll_data6", | 
|  | 168 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 169 | omap_mux_init_signal("hsusb2_tll_data7", | 
|  | 170 | OMAP_PIN_INPUT_PULLDOWN); | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 171 | break; | 
|  | 172 | case EHCI_HCD_OMAP_MODE_UNKNOWN: | 
|  | 173 | /* FALLTHROUGH */ | 
|  | 174 | default: | 
|  | 175 | break; | 
|  | 176 | } | 
|  | 177 |  | 
|  | 178 | switch (port_mode[2]) { | 
|  | 179 | case EHCI_HCD_OMAP_MODE_PHY: | 
|  | 180 | printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); | 
|  | 181 | break; | 
|  | 182 | case EHCI_HCD_OMAP_MODE_TLL: | 
| Tony Lindgren | 4896e39 | 2009-12-11 16:16:32 -0800 | [diff] [blame] | 183 | omap_mux_init_signal("hsusb3_tll_stp", | 
|  | 184 | OMAP_PIN_INPUT_PULLUP); | 
|  | 185 | omap_mux_init_signal("hsusb3_tll_clk", | 
|  | 186 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 187 | omap_mux_init_signal("hsusb3_tll_dir", | 
|  | 188 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 189 | omap_mux_init_signal("hsusb3_tll_nxt", | 
|  | 190 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 191 | omap_mux_init_signal("hsusb3_tll_data0", | 
|  | 192 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 193 | omap_mux_init_signal("hsusb3_tll_data1", | 
|  | 194 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 195 | omap_mux_init_signal("hsusb3_tll_data2", | 
|  | 196 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 197 | omap_mux_init_signal("hsusb3_tll_data3", | 
|  | 198 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 199 | omap_mux_init_signal("hsusb3_tll_data4", | 
|  | 200 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 201 | omap_mux_init_signal("hsusb3_tll_data5", | 
|  | 202 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 203 | omap_mux_init_signal("hsusb3_tll_data6", | 
|  | 204 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 205 | omap_mux_init_signal("hsusb3_tll_data7", | 
|  | 206 | OMAP_PIN_INPUT_PULLDOWN); | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 207 | break; | 
|  | 208 | case EHCI_HCD_OMAP_MODE_UNKNOWN: | 
|  | 209 | /* FALLTHROUGH */ | 
|  | 210 | default: | 
|  | 211 | break; | 
|  | 212 | } | 
|  | 213 |  | 
|  | 214 | return; | 
|  | 215 | } | 
|  | 216 |  | 
| Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 217 | void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 218 | { | 
|  | 219 | platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); | 
|  | 220 |  | 
|  | 221 | /* Setup Pin IO MUX for EHCI */ | 
|  | 222 | if (cpu_is_omap34xx()) | 
|  | 223 | setup_ehci_io_mux(pdata->port_mode); | 
|  | 224 |  | 
|  | 225 | if (platform_device_register(&ehci_device) < 0) { | 
|  | 226 | printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); | 
|  | 227 | return; | 
|  | 228 | } | 
|  | 229 | } | 
|  | 230 |  | 
|  | 231 | #else | 
|  | 232 |  | 
| Felipe Balbi | 6f69a18 | 2010-03-04 09:45:53 +0200 | [diff] [blame] | 233 | void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) | 
| Felipe Balbi | 58a5491 | 2009-11-22 10:11:01 -0800 | [diff] [blame] | 234 |  | 
|  | 235 | { | 
|  | 236 | } | 
|  | 237 |  | 
|  | 238 | #endif /* CONFIG_USB_EHCI_HCD */ | 
|  | 239 |  | 
| Anand Gadiyar | 95344fc | 2010-05-10 21:56:10 +0530 | [diff] [blame] | 240 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) | 
|  | 241 |  | 
|  | 242 | static struct resource ohci_resources[] = { | 
|  | 243 | { | 
|  | 244 | .start	= OMAP34XX_OHCI_BASE, | 
|  | 245 | .end	= OMAP34XX_OHCI_BASE + SZ_1K - 1, | 
|  | 246 | .flags	= IORESOURCE_MEM, | 
|  | 247 | }, | 
|  | 248 | { | 
|  | 249 | .start	= OMAP34XX_UHH_CONFIG_BASE, | 
|  | 250 | .end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, | 
|  | 251 | .flags	= IORESOURCE_MEM, | 
|  | 252 | }, | 
|  | 253 | { | 
|  | 254 | .start	= OMAP34XX_USBTLL_BASE, | 
|  | 255 | .end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1, | 
|  | 256 | .flags	= IORESOURCE_MEM, | 
|  | 257 | }, | 
|  | 258 | {	/* general IRQ */ | 
|  | 259 | .start	= INT_34XX_OHCI_IRQ, | 
|  | 260 | .flags	= IORESOURCE_IRQ, | 
|  | 261 | } | 
|  | 262 | }; | 
|  | 263 |  | 
|  | 264 | static u64 ohci_dmamask = DMA_BIT_MASK(32); | 
|  | 265 |  | 
|  | 266 | static struct platform_device ohci_device = { | 
|  | 267 | .name		= "ohci-omap3", | 
|  | 268 | .id		= 0, | 
|  | 269 | .dev = { | 
|  | 270 | .dma_mask		= &ohci_dmamask, | 
|  | 271 | .coherent_dma_mask	= 0xffffffff, | 
|  | 272 | }, | 
|  | 273 | .num_resources	= ARRAY_SIZE(ohci_resources), | 
|  | 274 | .resource	= ohci_resources, | 
|  | 275 | }; | 
|  | 276 |  | 
|  | 277 | static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) | 
|  | 278 | { | 
|  | 279 | switch (port_mode[0]) { | 
|  | 280 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | 281 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | 282 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | 283 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | 284 | omap_mux_init_signal("mm1_rxdp", | 
|  | 285 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 286 | omap_mux_init_signal("mm1_rxdm", | 
|  | 287 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 288 | /* FALLTHROUGH */ | 
|  | 289 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | 290 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | 291 | omap_mux_init_signal("mm1_rxrcv", | 
|  | 292 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 293 | /* FALLTHROUGH */ | 
|  | 294 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | 295 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | 296 | omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); | 
|  | 297 | /* FALLTHROUGH */ | 
|  | 298 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | 299 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | 300 | omap_mux_init_signal("mm1_txse0", | 
|  | 301 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 302 | omap_mux_init_signal("mm1_txdat", | 
|  | 303 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 304 | break; | 
|  | 305 | case OMAP_OHCI_PORT_MODE_UNUSED: | 
|  | 306 | /* FALLTHROUGH */ | 
|  | 307 | default: | 
|  | 308 | break; | 
|  | 309 | } | 
|  | 310 | switch (port_mode[1]) { | 
|  | 311 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | 312 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | 313 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | 314 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | 315 | omap_mux_init_signal("mm2_rxdp", | 
|  | 316 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 317 | omap_mux_init_signal("mm2_rxdm", | 
|  | 318 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 319 | /* FALLTHROUGH */ | 
|  | 320 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | 321 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | 322 | omap_mux_init_signal("mm2_rxrcv", | 
|  | 323 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 324 | /* FALLTHROUGH */ | 
|  | 325 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | 326 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | 327 | omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); | 
|  | 328 | /* FALLTHROUGH */ | 
|  | 329 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | 330 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | 331 | omap_mux_init_signal("mm2_txse0", | 
|  | 332 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 333 | omap_mux_init_signal("mm2_txdat", | 
|  | 334 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 335 | break; | 
|  | 336 | case OMAP_OHCI_PORT_MODE_UNUSED: | 
|  | 337 | /* FALLTHROUGH */ | 
|  | 338 | default: | 
|  | 339 | break; | 
|  | 340 | } | 
|  | 341 | switch (port_mode[2]) { | 
|  | 342 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | 
|  | 343 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | 
|  | 344 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | 
|  | 345 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | 
|  | 346 | omap_mux_init_signal("mm3_rxdp", | 
|  | 347 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 348 | omap_mux_init_signal("mm3_rxdm", | 
|  | 349 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 350 | /* FALLTHROUGH */ | 
|  | 351 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | 
|  | 352 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | 
|  | 353 | omap_mux_init_signal("mm3_rxrcv", | 
|  | 354 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 355 | /* FALLTHROUGH */ | 
|  | 356 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | 
|  | 357 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | 
|  | 358 | omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); | 
|  | 359 | /* FALLTHROUGH */ | 
|  | 360 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | 
|  | 361 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | 
|  | 362 | omap_mux_init_signal("mm3_txse0", | 
|  | 363 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 364 | omap_mux_init_signal("mm3_txdat", | 
|  | 365 | OMAP_PIN_INPUT_PULLDOWN); | 
|  | 366 | break; | 
|  | 367 | case OMAP_OHCI_PORT_MODE_UNUSED: | 
|  | 368 | /* FALLTHROUGH */ | 
|  | 369 | default: | 
|  | 370 | break; | 
|  | 371 | } | 
|  | 372 | } | 
|  | 373 |  | 
|  | 374 | void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) | 
|  | 375 | { | 
|  | 376 | platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); | 
|  | 377 |  | 
|  | 378 | /* Setup Pin IO MUX for OHCI */ | 
|  | 379 | if (cpu_is_omap34xx()) | 
|  | 380 | setup_ohci_io_mux(pdata->port_mode); | 
|  | 381 |  | 
|  | 382 | if (platform_device_register(&ohci_device) < 0) { | 
|  | 383 | pr_err("Unable to register FS-USB (OHCI) device\n"); | 
|  | 384 | return; | 
|  | 385 | } | 
|  | 386 | } | 
|  | 387 |  | 
|  | 388 | #else | 
|  | 389 |  | 
|  | 390 | void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) | 
|  | 391 | { | 
|  | 392 | } | 
|  | 393 |  | 
|  | 394 | #endif /* CONFIG_USB_OHCI_HCD */ |