Blame - drivers/char/cd1865.h - android_kernel_oneplus_msm8996

Linus Torvalds

1da177e

2005-04-16 15:20:36 -0700

[diff] [blame]

1

/*

2

* linux/drivers/char/cd1865.h -- Definitions relating to the CD1865

3

* for the Specialix IO8+ multiport serial driver.

*

*

* Specialix pays for the development and support of this driver.

9

* Please DO contact io8-linux@specialix.co.uk if you require

10

* support.

11

*

12

* This driver was developped in the BitWizard linux device

13

* driver service. If you require a linux device driver for your

14

* product, please contact devices@BitWizard.nl for a quote.

*

*/

/*

* Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.

*/

/* Values of choice for Interrupt ACKs */

24

/* These values are "obligatory" if you use the register based

25

* interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865

26

* databook */

27

#define SX_ACK_MINT 0x75 /* goes to PILR1 */

28

#define SX_ACK_TINT 0x76 /* goes to PILR2 */

29

#define SX_ACK_RINT 0x77 /* goes to PILR3 */

30

31

/* Chip ID (is used when chips ar daisy chained.) */

32

#define SX_ID 0x10

33

34

/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */

35

36

#define CD186x_NCH 8 /* Total number of channels */

37

#define CD186x_TPC 16 /* Ticks per character */

38

#define CD186x_NFIFO 8 /* TX FIFO size */

39

40

41

/* Global registers */

42

43

#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */

44

#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */

45

#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */

46

#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */

47

#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */

48

#define CD186x_CAR 0x64 /* Channel Access Register */

49

#define CD186x_SRSR 0x65 /* Channel Access Register */

50

#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */

51

#define CD186x_PPRH 0x70 /* Prescaler Period Register High */

52

#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */

53

#define CD186x_RDR 0x78 /* Receiver Data Register */

54

#define CD186x_RCSR 0x7a /* Receiver Character Status Register */

55

#define CD186x_TDR 0x7b /* Transmit Data Register */

56

#define CD186x_EOIR 0x7f /* End of Interrupt Register */

57

#define CD186x_MRAR 0x75 /* Modem Request Acknowledge register */

58

#define CD186x_TRAR 0x76 /* Transmit Request Acknowledge register */

59

#define CD186x_RRAR 0x77 /* Receive Request Acknowledge register */

60

#define CD186x_SRCR 0x66 /* Service Request Configuration register */

61

62

/* Channel Registers */

63

64

#define CD186x_CCR 0x01 /* Channel Command Register */

65

#define CD186x_IER 0x02 /* Interrupt Enable Register */

66

#define CD186x_COR1 0x03 /* Channel Option Register 1 */

67

#define CD186x_COR2 0x04 /* Channel Option Register 2 */

68

#define CD186x_COR3 0x05 /* Channel Option Register 3 */

69

#define CD186x_CCSR 0x06 /* Channel Control Status Register */

70

#define CD186x_RDCR 0x07 /* Receive Data Count Register */

71

#define CD186x_SCHR1 0x09 /* Special Character Register 1 */

72

#define CD186x_SCHR2 0x0a /* Special Character Register 2 */

73

#define CD186x_SCHR3 0x0b /* Special Character Register 3 */

74

#define CD186x_SCHR4 0x0c /* Special Character Register 4 */

75

#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */

76

#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */

77

#define CD186x_MCR 0x12 /* Modem Change Register */

78

#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */

79

#define CD186x_MSVR 0x28 /* Modem Signal Value Register */

80

#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */

81

#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */

82

#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */

83

#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */

84

#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */

85

#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */

86

87

88

/* Global Interrupt Vector Register (R/W) */

89

90

#define GIVR_ITMASK 0x07 /* Interrupt type mask */

91

#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */

92

#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */

93

#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */

94

#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */

95

96

97

/* Global Interrupt Channel Register (R/W) */

98

99

#define GICR_CHAN 0x1c /* Channel Number Mask */

100

#define GICR_CHAN_OFF 2 /* Channel Number shift */

101

102

103

/* Channel Address Register (R/W) */

104

105

#define CAR_CHAN 0x07 /* Channel Number Mask */

106

#define CAR_A7 0x08 /* A7 Address Extension (unused) */

107

108

109

/* Receive Character Status Register (R/O) */

110

111

#define RCSR_TOUT 0x80 /* Rx Timeout */

112

#define RCSR_SCDET 0x70 /* Special Character Detected Mask */

113

#define RCSR_NO_SC 0x00 /* No Special Characters Detected */

114

#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */

115

#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */

116

#define RCSR_SC_3 0x30 /* Special Char 3 Detected */

117

#define RCSR_SC_4 0x40 /* Special Char 4 Detected */

118

#define RCSR_BREAK 0x08 /* Break has been detected */

119

#define RCSR_PE 0x04 /* Parity Error */

120

#define RCSR_FE 0x02 /* Frame Error */

121

#define RCSR_OE 0x01 /* Overrun Error */

122

123

124

/* Channel Command Register (R/W) (commands in groups can be OR-ed) */

125

126

#define CCR_HARDRESET 0x81 /* Reset the chip */

127

128

#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */

129

130

#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */

131

#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */

132

#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */

133

134

#define CCR_SSCH1 0x21 /* Send Special Character 1 */

135

136

#define CCR_SSCH2 0x22 /* Send Special Character 2 */

137

138

#define CCR_SSCH3 0x23 /* Send Special Character 3 */

139

140

#define CCR_SSCH4 0x24 /* Send Special Character 4 */

141

142

#define CCR_TXEN 0x18 /* Enable Transmitter */

143

#define CCR_RXEN 0x12 /* Enable Receiver */

144

145

#define CCR_TXDIS 0x14 /* Disable Transmitter */

146

#define CCR_RXDIS 0x11 /* Disable Receiver */

147

148

149

/* Interrupt Enable Register (R/W) */

150

151

#define IER_DSR 0x80 /* Enable interrupt on DSR change */

152

#define IER_CD 0x40 /* Enable interrupt on CD change */

153

#define IER_CTS 0x20 /* Enable interrupt on CTS change */

154

#define IER_RXD 0x10 /* Enable interrupt on Receive Data */

155

#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */

156

#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */

157

#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */

158

#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */

159

160

161

/* Channel Option Register 1 (R/W) */

162

163

#define COR1_ODDP 0x80 /* Odd Parity */

164

#define COR1_PARMODE 0x60 /* Parity Mode mask */

165

#define COR1_NOPAR 0x00 /* No Parity */

166

#define COR1_FORCEPAR 0x20 /* Force Parity */

167

#define COR1_NORMPAR 0x40 /* Normal Parity */

168

#define COR1_IGNORE 0x10 /* Ignore Parity on RX */

169

#define COR1_STOPBITS 0x0c /* Number of Stop Bits */

170

#define COR1_1SB 0x00 /* 1 Stop Bit */

171

#define COR1_15SB 0x04 /* 1.5 Stop Bits */

172

#define COR1_2SB 0x08 /* 2 Stop Bits */

173

#define COR1_CHARLEN 0x03 /* Character Length */

174

#define COR1_5BITS 0x00 /* 5 bits */

175

#define COR1_6BITS 0x01 /* 6 bits */

176

#define COR1_7BITS 0x02 /* 7 bits */

177

#define COR1_8BITS 0x03 /* 8 bits */

178

179

180

/* Channel Option Register 2 (R/W) */

181

182

#define COR2_IXM 0x80 /* Implied XON mode */

183

#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */

184

#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */

185

#define COR2_LLM 0x10 /* Local Loopback Mode */

186

#define COR2_RLM 0x08 /* Remote Loopback Mode */

187

#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */

188

#define COR2_CTSAE 0x02 /* CTS Automatic Enable */

189

#define COR2_DSRAE 0x01 /* DSR Automatic Enable */

190

191

192

/* Channel Option Register 3 (R/W) */

193

194

#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */

195

#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */

196

#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */

197

#define COR3_SCDE 0x10 /* Special Character Detection Enable */

198

#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */

199

200

201

/* Channel Control Status Register (R/O) */

202

203

#define CCSR_RXEN 0x80 /* Receiver Enabled */

204

#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */

205

#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */

206

#define CCSR_TXEN 0x08 /* Transmitter Enabled */

207

#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */

208

#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */

209

210

211

/* Modem Change Option Register 1 (R/W) */

212

213

#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */

214

#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */

215

#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */

216

#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */

217

#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */

218

219

220

/* Modem Change Option Register 2 (R/W) */

221

222

#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */

223

#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */

224

#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */

225

226

/* Modem Change Register (R/W) */

227

228

#define MCR_DSRCHG 0x80 /* DSR Changed */

229

#define MCR_CDCHG 0x40 /* CD Changed */

230

#define MCR_CTSCHG 0x20 /* CTS Changed */

231

232

233

/* Modem Signal Value Register (R/W) */

234

235

#define MSVR_DSR 0x80 /* Current state of DSR input */

236

#define MSVR_CD 0x40 /* Current state of CD input */

237

#define MSVR_CTS 0x20 /* Current state of CTS input */

238

#define MSVR_DTR 0x02 /* Current state of DTR output */

239

#define MSVR_RTS 0x01 /* Current state of RTS output */

240

241

242

/* Escape characters */

243

244

#define CD186x_C_ESC 0x00 /* Escape character */

245

#define CD186x_C_SBRK 0x81 /* Start sending BREAK */

246

#define CD186x_C_DELAY 0x82 /* Delay output */

247

#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */

248

249

#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */

250

#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */

251

#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */

#define SRCR_PKGTYPE 0x80

256

#define SRCR_REGACKEN 0x40

257

#define SRCR_DAISYEN 0x20

258

#define SRCR_GLOBPRI 0x10

259

#define SRCR_UNFAIR 0x08

260

#define SRCR_AUTOPRI 0x02

261

#define SRCR_PRISEL 0x01

262

263