| David Gibson | 1d3bb99 | 2007-08-23 13:56:01 +1000 | [diff] [blame] | 1 | /* | 
|  | 2 | * drivers/net/ibm_newemac/phy.c | 
|  | 3 | * | 
|  | 4 | * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. | 
|  | 5 | * Borrowed from sungem_phy.c, though I only kept the generic MII | 
|  | 6 | * driver for now. | 
|  | 7 | * | 
|  | 8 | * This file should be shared with other drivers or eventually | 
|  | 9 | * merged as the "low level" part of miilib | 
|  | 10 | * | 
| Benjamin Herrenschmidt | 17cf803 | 2007-12-05 11:14:33 +1100 | [diff] [blame] | 11 | * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. | 
|  | 12 | *                <benh@kernel.crashing.org> | 
|  | 13 | * | 
|  | 14 | * Based on the arch/ppc version of the driver: | 
|  | 15 | * | 
| David Gibson | 1d3bb99 | 2007-08-23 13:56:01 +1000 | [diff] [blame] | 16 | * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) | 
|  | 17 | * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net> | 
|  | 18 | * | 
|  | 19 | */ | 
|  | 20 | #include <linux/module.h> | 
|  | 21 | #include <linux/kernel.h> | 
|  | 22 | #include <linux/types.h> | 
|  | 23 | #include <linux/netdevice.h> | 
|  | 24 | #include <linux/mii.h> | 
|  | 25 | #include <linux/ethtool.h> | 
|  | 26 | #include <linux/delay.h> | 
|  | 27 |  | 
|  | 28 | #include "emac.h" | 
|  | 29 | #include "phy.h" | 
|  | 30 |  | 
|  | 31 | static inline int phy_read(struct mii_phy *phy, int reg) | 
|  | 32 | { | 
|  | 33 | return phy->mdio_read(phy->dev, phy->address, reg); | 
|  | 34 | } | 
|  | 35 |  | 
|  | 36 | static inline void phy_write(struct mii_phy *phy, int reg, int val) | 
|  | 37 | { | 
|  | 38 | phy->mdio_write(phy->dev, phy->address, reg, val); | 
|  | 39 | } | 
|  | 40 |  | 
|  | 41 | int emac_mii_reset_phy(struct mii_phy *phy) | 
|  | 42 | { | 
|  | 43 | int val; | 
|  | 44 | int limit = 10000; | 
|  | 45 |  | 
|  | 46 | val = phy_read(phy, MII_BMCR); | 
|  | 47 | val &= ~(BMCR_ISOLATE | BMCR_ANENABLE); | 
|  | 48 | val |= BMCR_RESET; | 
|  | 49 | phy_write(phy, MII_BMCR, val); | 
|  | 50 |  | 
|  | 51 | udelay(300); | 
|  | 52 |  | 
|  | 53 | while (limit--) { | 
|  | 54 | val = phy_read(phy, MII_BMCR); | 
|  | 55 | if (val >= 0 && (val & BMCR_RESET) == 0) | 
|  | 56 | break; | 
|  | 57 | udelay(10); | 
|  | 58 | } | 
|  | 59 | if ((val & BMCR_ISOLATE) && limit > 0) | 
|  | 60 | phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); | 
|  | 61 |  | 
|  | 62 | return limit <= 0; | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) | 
|  | 66 | { | 
|  | 67 | int ctl, adv; | 
|  | 68 |  | 
|  | 69 | phy->autoneg = AUTONEG_ENABLE; | 
|  | 70 | phy->speed = SPEED_10; | 
|  | 71 | phy->duplex = DUPLEX_HALF; | 
|  | 72 | phy->pause = phy->asym_pause = 0; | 
|  | 73 | phy->advertising = advertise; | 
|  | 74 |  | 
|  | 75 | ctl = phy_read(phy, MII_BMCR); | 
|  | 76 | if (ctl < 0) | 
|  | 77 | return ctl; | 
|  | 78 | ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); | 
|  | 79 |  | 
|  | 80 | /* First clear the PHY */ | 
|  | 81 | phy_write(phy, MII_BMCR, ctl); | 
|  | 82 |  | 
|  | 83 | /* Setup standard advertise */ | 
|  | 84 | adv = phy_read(phy, MII_ADVERTISE); | 
|  | 85 | if (adv < 0) | 
|  | 86 | return adv; | 
|  | 87 | adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | | 
|  | 88 | ADVERTISE_PAUSE_ASYM); | 
|  | 89 | if (advertise & ADVERTISED_10baseT_Half) | 
|  | 90 | adv |= ADVERTISE_10HALF; | 
|  | 91 | if (advertise & ADVERTISED_10baseT_Full) | 
|  | 92 | adv |= ADVERTISE_10FULL; | 
|  | 93 | if (advertise & ADVERTISED_100baseT_Half) | 
|  | 94 | adv |= ADVERTISE_100HALF; | 
|  | 95 | if (advertise & ADVERTISED_100baseT_Full) | 
|  | 96 | adv |= ADVERTISE_100FULL; | 
|  | 97 | if (advertise & ADVERTISED_Pause) | 
|  | 98 | adv |= ADVERTISE_PAUSE_CAP; | 
|  | 99 | if (advertise & ADVERTISED_Asym_Pause) | 
|  | 100 | adv |= ADVERTISE_PAUSE_ASYM; | 
|  | 101 | phy_write(phy, MII_ADVERTISE, adv); | 
|  | 102 |  | 
|  | 103 | if (phy->features & | 
|  | 104 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | 
|  | 105 | adv = phy_read(phy, MII_CTRL1000); | 
|  | 106 | if (adv < 0) | 
|  | 107 | return adv; | 
|  | 108 | adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); | 
|  | 109 | if (advertise & ADVERTISED_1000baseT_Full) | 
|  | 110 | adv |= ADVERTISE_1000FULL; | 
|  | 111 | if (advertise & ADVERTISED_1000baseT_Half) | 
|  | 112 | adv |= ADVERTISE_1000HALF; | 
|  | 113 | phy_write(phy, MII_CTRL1000, adv); | 
|  | 114 | } | 
|  | 115 |  | 
|  | 116 | /* Start/Restart aneg */ | 
|  | 117 | ctl = phy_read(phy, MII_BMCR); | 
|  | 118 | ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); | 
|  | 119 | phy_write(phy, MII_BMCR, ctl); | 
|  | 120 |  | 
|  | 121 | return 0; | 
|  | 122 | } | 
|  | 123 |  | 
|  | 124 | static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) | 
|  | 125 | { | 
|  | 126 | int ctl; | 
|  | 127 |  | 
|  | 128 | phy->autoneg = AUTONEG_DISABLE; | 
|  | 129 | phy->speed = speed; | 
|  | 130 | phy->duplex = fd; | 
|  | 131 | phy->pause = phy->asym_pause = 0; | 
|  | 132 |  | 
|  | 133 | ctl = phy_read(phy, MII_BMCR); | 
|  | 134 | if (ctl < 0) | 
|  | 135 | return ctl; | 
|  | 136 | ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); | 
|  | 137 |  | 
|  | 138 | /* First clear the PHY */ | 
|  | 139 | phy_write(phy, MII_BMCR, ctl | BMCR_RESET); | 
|  | 140 |  | 
|  | 141 | /* Select speed & duplex */ | 
|  | 142 | switch (speed) { | 
|  | 143 | case SPEED_10: | 
|  | 144 | break; | 
|  | 145 | case SPEED_100: | 
|  | 146 | ctl |= BMCR_SPEED100; | 
|  | 147 | break; | 
|  | 148 | case SPEED_1000: | 
|  | 149 | ctl |= BMCR_SPEED1000; | 
|  | 150 | break; | 
|  | 151 | default: | 
|  | 152 | return -EINVAL; | 
|  | 153 | } | 
|  | 154 | if (fd == DUPLEX_FULL) | 
|  | 155 | ctl |= BMCR_FULLDPLX; | 
|  | 156 | phy_write(phy, MII_BMCR, ctl); | 
|  | 157 |  | 
|  | 158 | return 0; | 
|  | 159 | } | 
|  | 160 |  | 
|  | 161 | static int genmii_poll_link(struct mii_phy *phy) | 
|  | 162 | { | 
|  | 163 | int status; | 
|  | 164 |  | 
|  | 165 | /* Clear latched value with dummy read */ | 
|  | 166 | phy_read(phy, MII_BMSR); | 
|  | 167 | status = phy_read(phy, MII_BMSR); | 
|  | 168 | if (status < 0 || (status & BMSR_LSTATUS) == 0) | 
|  | 169 | return 0; | 
|  | 170 | if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) | 
|  | 171 | return 0; | 
|  | 172 | return 1; | 
|  | 173 | } | 
|  | 174 |  | 
|  | 175 | static int genmii_read_link(struct mii_phy *phy) | 
|  | 176 | { | 
|  | 177 | if (phy->autoneg == AUTONEG_ENABLE) { | 
|  | 178 | int glpa = 0; | 
|  | 179 | int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); | 
|  | 180 | if (lpa < 0) | 
|  | 181 | return lpa; | 
|  | 182 |  | 
|  | 183 | if (phy->features & | 
|  | 184 | (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { | 
|  | 185 | int adv = phy_read(phy, MII_CTRL1000); | 
|  | 186 | glpa = phy_read(phy, MII_STAT1000); | 
|  | 187 |  | 
|  | 188 | if (glpa < 0 || adv < 0) | 
|  | 189 | return adv; | 
|  | 190 |  | 
|  | 191 | glpa &= adv << 2; | 
|  | 192 | } | 
|  | 193 |  | 
|  | 194 | phy->speed = SPEED_10; | 
|  | 195 | phy->duplex = DUPLEX_HALF; | 
|  | 196 | phy->pause = phy->asym_pause = 0; | 
|  | 197 |  | 
|  | 198 | if (glpa & (LPA_1000FULL | LPA_1000HALF)) { | 
|  | 199 | phy->speed = SPEED_1000; | 
|  | 200 | if (glpa & LPA_1000FULL) | 
|  | 201 | phy->duplex = DUPLEX_FULL; | 
|  | 202 | } else if (lpa & (LPA_100FULL | LPA_100HALF)) { | 
|  | 203 | phy->speed = SPEED_100; | 
|  | 204 | if (lpa & LPA_100FULL) | 
|  | 205 | phy->duplex = DUPLEX_FULL; | 
|  | 206 | } else if (lpa & LPA_10FULL) | 
|  | 207 | phy->duplex = DUPLEX_FULL; | 
|  | 208 |  | 
|  | 209 | if (phy->duplex == DUPLEX_FULL) { | 
|  | 210 | phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; | 
|  | 211 | phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; | 
|  | 212 | } | 
|  | 213 | } else { | 
|  | 214 | int bmcr = phy_read(phy, MII_BMCR); | 
|  | 215 | if (bmcr < 0) | 
|  | 216 | return bmcr; | 
|  | 217 |  | 
|  | 218 | if (bmcr & BMCR_FULLDPLX) | 
|  | 219 | phy->duplex = DUPLEX_FULL; | 
|  | 220 | else | 
|  | 221 | phy->duplex = DUPLEX_HALF; | 
|  | 222 | if (bmcr & BMCR_SPEED1000) | 
|  | 223 | phy->speed = SPEED_1000; | 
|  | 224 | else if (bmcr & BMCR_SPEED100) | 
|  | 225 | phy->speed = SPEED_100; | 
|  | 226 | else | 
|  | 227 | phy->speed = SPEED_10; | 
|  | 228 |  | 
|  | 229 | phy->pause = phy->asym_pause = 0; | 
|  | 230 | } | 
|  | 231 | return 0; | 
|  | 232 | } | 
|  | 233 |  | 
|  | 234 | /* Generic implementation for most 10/100/1000 PHYs */ | 
|  | 235 | static struct mii_phy_ops generic_phy_ops = { | 
|  | 236 | .setup_aneg	= genmii_setup_aneg, | 
|  | 237 | .setup_forced	= genmii_setup_forced, | 
|  | 238 | .poll_link	= genmii_poll_link, | 
|  | 239 | .read_link	= genmii_read_link | 
|  | 240 | }; | 
|  | 241 |  | 
|  | 242 | static struct mii_phy_def genmii_phy_def = { | 
|  | 243 | .phy_id		= 0x00000000, | 
|  | 244 | .phy_id_mask	= 0x00000000, | 
|  | 245 | .name		= "Generic MII", | 
|  | 246 | .ops		= &generic_phy_ops | 
|  | 247 | }; | 
|  | 248 |  | 
|  | 249 | /* CIS8201 */ | 
|  | 250 | #define MII_CIS8201_10BTCSR	0x16 | 
|  | 251 | #define  TENBTCSR_ECHO_DISABLE	0x2000 | 
|  | 252 | #define MII_CIS8201_EPCR	0x17 | 
|  | 253 | #define  EPCR_MODE_MASK		0x3000 | 
|  | 254 | #define  EPCR_GMII_MODE		0x0000 | 
|  | 255 | #define  EPCR_RGMII_MODE	0x1000 | 
|  | 256 | #define  EPCR_TBI_MODE		0x2000 | 
|  | 257 | #define  EPCR_RTBI_MODE		0x3000 | 
|  | 258 | #define MII_CIS8201_ACSR	0x1c | 
|  | 259 | #define  ACSR_PIN_PRIO_SELECT	0x0004 | 
|  | 260 |  | 
|  | 261 | static int cis8201_init(struct mii_phy *phy) | 
|  | 262 | { | 
|  | 263 | int epcr; | 
|  | 264 |  | 
|  | 265 | epcr = phy_read(phy, MII_CIS8201_EPCR); | 
|  | 266 | if (epcr < 0) | 
|  | 267 | return epcr; | 
|  | 268 |  | 
|  | 269 | epcr &= ~EPCR_MODE_MASK; | 
|  | 270 |  | 
|  | 271 | switch (phy->mode) { | 
|  | 272 | case PHY_MODE_TBI: | 
|  | 273 | epcr |= EPCR_TBI_MODE; | 
|  | 274 | break; | 
|  | 275 | case PHY_MODE_RTBI: | 
|  | 276 | epcr |= EPCR_RTBI_MODE; | 
|  | 277 | break; | 
|  | 278 | case PHY_MODE_GMII: | 
|  | 279 | epcr |= EPCR_GMII_MODE; | 
|  | 280 | break; | 
|  | 281 | case PHY_MODE_RGMII: | 
|  | 282 | default: | 
|  | 283 | epcr |= EPCR_RGMII_MODE; | 
|  | 284 | } | 
|  | 285 |  | 
|  | 286 | phy_write(phy, MII_CIS8201_EPCR, epcr); | 
|  | 287 |  | 
|  | 288 | /* MII regs override strap pins */ | 
|  | 289 | phy_write(phy, MII_CIS8201_ACSR, | 
|  | 290 | phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT); | 
|  | 291 |  | 
|  | 292 | /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */ | 
|  | 293 | phy_write(phy, MII_CIS8201_10BTCSR, | 
|  | 294 | phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE); | 
|  | 295 |  | 
|  | 296 | return 0; | 
|  | 297 | } | 
|  | 298 |  | 
|  | 299 | static struct mii_phy_ops cis8201_phy_ops = { | 
|  | 300 | .init		= cis8201_init, | 
|  | 301 | .setup_aneg	= genmii_setup_aneg, | 
|  | 302 | .setup_forced	= genmii_setup_forced, | 
|  | 303 | .poll_link	= genmii_poll_link, | 
|  | 304 | .read_link	= genmii_read_link | 
|  | 305 | }; | 
|  | 306 |  | 
|  | 307 | static struct mii_phy_def cis8201_phy_def = { | 
|  | 308 | .phy_id		= 0x000fc410, | 
|  | 309 | .phy_id_mask	= 0x000ffff0, | 
|  | 310 | .name		= "CIS8201 Gigabit Ethernet", | 
|  | 311 | .ops		= &cis8201_phy_ops | 
|  | 312 | }; | 
|  | 313 |  | 
| Stefan Roese | f1f304f | 2007-12-05 11:14:25 +1100 | [diff] [blame] | 314 | static struct mii_phy_def bcm5248_phy_def = { | 
|  | 315 |  | 
|  | 316 | .phy_id		= 0x0143bc00, | 
|  | 317 | .phy_id_mask	= 0x0ffffff0, | 
|  | 318 | .name		= "BCM5248 10/100 SMII Ethernet", | 
|  | 319 | .ops		= &generic_phy_ops | 
|  | 320 | }; | 
|  | 321 |  | 
|  | 322 | static int m88e1111_init(struct mii_phy *phy) | 
|  | 323 | { | 
|  | 324 | pr_debug("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__); | 
|  | 325 | phy_write(phy, 0x14, 0x0ce3); | 
|  | 326 | phy_write(phy, 0x18, 0x4101); | 
|  | 327 | phy_write(phy, 0x09, 0x0e00); | 
|  | 328 | phy_write(phy, 0x04, 0x01e1); | 
|  | 329 | phy_write(phy, 0x00, 0x9140); | 
|  | 330 | phy_write(phy, 0x00, 0x1140); | 
|  | 331 |  | 
|  | 332 | return  0; | 
|  | 333 | } | 
|  | 334 |  | 
| Stefan Roese | 8df4538 | 2007-12-05 11:14:26 +1100 | [diff] [blame] | 335 | static int et1011c_init(struct mii_phy *phy) | 
|  | 336 | { | 
|  | 337 | u16 reg_short; | 
|  | 338 |  | 
|  | 339 | reg_short = (u16)(phy_read(phy, 0x16)); | 
|  | 340 | reg_short &= ~(0x7); | 
|  | 341 | reg_short |= 0x6;	/* RGMII Trace Delay*/ | 
|  | 342 | phy_write(phy, 0x16, reg_short); | 
|  | 343 |  | 
|  | 344 | reg_short = (u16)(phy_read(phy, 0x17)); | 
|  | 345 | reg_short &= ~(0x40); | 
|  | 346 | phy_write(phy, 0x17, reg_short); | 
|  | 347 |  | 
|  | 348 | phy_write(phy, 0x1c, 0x74f0); | 
|  | 349 | return 0; | 
|  | 350 | } | 
|  | 351 |  | 
|  | 352 | static struct mii_phy_ops et1011c_phy_ops = { | 
|  | 353 | .init		= et1011c_init, | 
|  | 354 | .setup_aneg	= genmii_setup_aneg, | 
|  | 355 | .setup_forced	= genmii_setup_forced, | 
|  | 356 | .poll_link	= genmii_poll_link, | 
|  | 357 | .read_link	= genmii_read_link | 
|  | 358 | }; | 
|  | 359 |  | 
|  | 360 | static struct mii_phy_def et1011c_phy_def = { | 
|  | 361 | .phy_id		= 0x0282f000, | 
|  | 362 | .phy_id_mask	= 0x0fffff00, | 
|  | 363 | .name		= "ET1011C Gigabit Ethernet", | 
|  | 364 | .ops		= &et1011c_phy_ops | 
|  | 365 | }; | 
|  | 366 |  | 
|  | 367 |  | 
|  | 368 |  | 
|  | 369 |  | 
|  | 370 |  | 
| Stefan Roese | f1f304f | 2007-12-05 11:14:25 +1100 | [diff] [blame] | 371 | static struct mii_phy_ops m88e1111_phy_ops = { | 
|  | 372 | .init		= m88e1111_init, | 
|  | 373 | .setup_aneg	= genmii_setup_aneg, | 
|  | 374 | .setup_forced	= genmii_setup_forced, | 
|  | 375 | .poll_link	= genmii_poll_link, | 
|  | 376 | .read_link	= genmii_read_link | 
|  | 377 | }; | 
|  | 378 |  | 
|  | 379 | static struct mii_phy_def m88e1111_phy_def = { | 
|  | 380 |  | 
|  | 381 | .phy_id		= 0x01410CC0, | 
|  | 382 | .phy_id_mask	= 0x0ffffff0, | 
|  | 383 | .name		= "Marvell 88E1111 Ethernet", | 
|  | 384 | .ops		= &m88e1111_phy_ops, | 
|  | 385 | }; | 
|  | 386 |  | 
| David Gibson | 1d3bb99 | 2007-08-23 13:56:01 +1000 | [diff] [blame] | 387 | static struct mii_phy_def *mii_phy_table[] = { | 
| Stefan Roese | 8df4538 | 2007-12-05 11:14:26 +1100 | [diff] [blame] | 388 | &et1011c_phy_def, | 
| David Gibson | 1d3bb99 | 2007-08-23 13:56:01 +1000 | [diff] [blame] | 389 | &cis8201_phy_def, | 
| Stefan Roese | f1f304f | 2007-12-05 11:14:25 +1100 | [diff] [blame] | 390 | &bcm5248_phy_def, | 
|  | 391 | &m88e1111_phy_def, | 
| David Gibson | 1d3bb99 | 2007-08-23 13:56:01 +1000 | [diff] [blame] | 392 | &genmii_phy_def, | 
|  | 393 | NULL | 
|  | 394 | }; | 
|  | 395 |  | 
|  | 396 | int emac_mii_phy_probe(struct mii_phy *phy, int address) | 
|  | 397 | { | 
|  | 398 | struct mii_phy_def *def; | 
|  | 399 | int i; | 
|  | 400 | u32 id; | 
|  | 401 |  | 
|  | 402 | phy->autoneg = AUTONEG_DISABLE; | 
|  | 403 | phy->advertising = 0; | 
|  | 404 | phy->address = address; | 
|  | 405 | phy->speed = SPEED_10; | 
|  | 406 | phy->duplex = DUPLEX_HALF; | 
|  | 407 | phy->pause = phy->asym_pause = 0; | 
|  | 408 |  | 
|  | 409 | /* Take PHY out of isolate mode and reset it. */ | 
|  | 410 | if (emac_mii_reset_phy(phy)) | 
|  | 411 | return -ENODEV; | 
|  | 412 |  | 
|  | 413 | /* Read ID and find matching entry */ | 
|  | 414 | id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); | 
|  | 415 | for (i = 0; (def = mii_phy_table[i]) != NULL; i++) | 
|  | 416 | if ((id & def->phy_id_mask) == def->phy_id) | 
|  | 417 | break; | 
|  | 418 | /* Should never be NULL (we have a generic entry), but... */ | 
|  | 419 | if (!def) | 
|  | 420 | return -ENODEV; | 
|  | 421 |  | 
|  | 422 | phy->def = def; | 
|  | 423 |  | 
|  | 424 | /* Determine PHY features if needed */ | 
|  | 425 | phy->features = def->features; | 
|  | 426 | if (!phy->features) { | 
|  | 427 | u16 bmsr = phy_read(phy, MII_BMSR); | 
|  | 428 | if (bmsr & BMSR_ANEGCAPABLE) | 
|  | 429 | phy->features |= SUPPORTED_Autoneg; | 
|  | 430 | if (bmsr & BMSR_10HALF) | 
|  | 431 | phy->features |= SUPPORTED_10baseT_Half; | 
|  | 432 | if (bmsr & BMSR_10FULL) | 
|  | 433 | phy->features |= SUPPORTED_10baseT_Full; | 
|  | 434 | if (bmsr & BMSR_100HALF) | 
|  | 435 | phy->features |= SUPPORTED_100baseT_Half; | 
|  | 436 | if (bmsr & BMSR_100FULL) | 
|  | 437 | phy->features |= SUPPORTED_100baseT_Full; | 
|  | 438 | if (bmsr & BMSR_ESTATEN) { | 
|  | 439 | u16 esr = phy_read(phy, MII_ESTATUS); | 
|  | 440 | if (esr & ESTATUS_1000_TFULL) | 
|  | 441 | phy->features |= SUPPORTED_1000baseT_Full; | 
|  | 442 | if (esr & ESTATUS_1000_THALF) | 
|  | 443 | phy->features |= SUPPORTED_1000baseT_Half; | 
|  | 444 | } | 
|  | 445 | phy->features |= SUPPORTED_MII; | 
|  | 446 | } | 
|  | 447 |  | 
|  | 448 | /* Setup default advertising */ | 
|  | 449 | phy->advertising = phy->features; | 
|  | 450 |  | 
|  | 451 | return 0; | 
|  | 452 | } | 
|  | 453 |  | 
|  | 454 | MODULE_LICENSE("GPL"); |