arch/mips/pci/msi-octeon.c

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2005-2009, 2010 Cavium Networks
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/msi.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>

#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npi-defs.h>
#include <asm/octeon/cvmx-pci-defs.h>
#include <asm/octeon/cvmx-npei-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/pci-octeon.h>

/*
 * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
 * in use.
 */
static u64 msi_free_irq_bitmask[4];

/*
 * Each bit in msi_multiple_irq_bitmask tells that the device using
 * this bit in msi_free_irq_bitmask is also using the next bit. This
 * is used so we can disable all of the MSI interrupts when a device
 * uses multiple.
 */
static u64 msi_multiple_irq_bitmask[4];

/*
 * This lock controls updates to msi_free_irq_bitmask and
 * msi_multiple_irq_bitmask.
 */
static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);

/*
 * Number of MSI IRQs used. This variable is set up in
 * the module init time.
 */
static int msi_irq_size;

/**
 * Called when a driver request MSI interrupts instead of the
 * legacy INT A-D. This routine will allocate multiple interrupts
 * for MSI devices that support them. A device can override this by
 * programming the MSI control bits [6:4] before calling
 * pci_enable_msi().
 *
 * @dev:    Device requesting MSI interrupts
 * @desc:   MSI descriptor
 *
 * Returns 0 on success.
 */
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
	struct msi_msg msg;
	u16 control;
	int configured_private_bits;
	int request_private_bits;
	int irq = 0;
	int irq_step;
	u64 search_mask;
	int index;

	/*
	 * Read the MSI config to figure out how many IRQs this device
	 * wants.  Most devices only want 1, which will give
	 * configured_private_bits and request_private_bits equal 0.
	 */
	pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
			     &control);

	/*
	 * If the number of private bits has been configured then use
	 * that value instead of the requested number. This gives the
	 * driver the chance to override the number of interrupts
	 * before calling pci_enable_msi().
	 */
	configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
	if (configured_private_bits == 0) {
		/* Nothing is configured, so use the hardware requested size */
		request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
	} else {
		/*
		 * Use the number of configured bits, assuming the
		 * driver wanted to override the hardware request
		 * value.
		 */
		request_private_bits = configured_private_bits;
	}

	/*
	 * The PCI 2.3 spec mandates that there are at most 32
	 * interrupts. If this device asks for more, only give it one.
	 */
	if (request_private_bits > 5)
		request_private_bits = 0;

try_only_one:
	/*
	 * The IRQs have to be aligned on a power of two based on the
	 * number being requested.
	 */
	irq_step = 1 << request_private_bits;

	/* Mask with one bit for each IRQ */
	search_mask = (1 << irq_step) - 1;

	/*
	 * We're going to search msi_free_irq_bitmask_lock for zero
	 * bits. This represents an MSI interrupt number that isn't in
	 * use.
	 */
	spin_lock(&msi_free_irq_bitmask_lock);
	for (index = 0; index < msi_irq_size/64; index++) {
		for (irq = 0; irq < 64; irq += irq_step) {
			if ((msi_free_irq_bitmask[index] & (search_mask << irq)) == 0) {
				msi_free_irq_bitmask[index] |= search_mask << irq;
				msi_multiple_irq_bitmask[index] |= (search_mask >> 1) << irq;
				goto msi_irq_allocated;
			}
		}
	}
msi_irq_allocated:
	spin_unlock(&msi_free_irq_bitmask_lock);

	/* Make sure the search for available interrupts didn't fail */
	if (irq >= 64) {
		if (request_private_bits) {
			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
			       1 << request_private_bits);
			request_private_bits = 0;
			goto try_only_one;
		} else
			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
	}

	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
	irq += index*64;
	irq += OCTEON_IRQ_MSI_BIT0;

	switch (octeon_dma_bar_type) {
	case OCTEON_DMA_BAR_TYPE_SMALL:
		/* When not using big bar, Bar 0 is based at 128MB */
		msg.address_lo =
			((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff;
		msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32;
	case OCTEON_DMA_BAR_TYPE_BIG:
		/* When using big bar, Bar 0 is based at 0 */
		msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff;
		msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32;
		break;
	case OCTEON_DMA_BAR_TYPE_PCIE:
		/* When using PCIe, Bar 0 is based at 0 */
		/* FIXME CVMX_NPEI_MSI_RCV* other than 0? */
		msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff;
		msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32;
		break;
	default:
		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n");
	}
	msg.data = irq - OCTEON_IRQ_MSI_BIT0;

	/* Update the number of IRQs the device has available to it */
	control &= ~PCI_MSI_FLAGS_QSIZE;
	control |= request_private_bits << 4;
	pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
			      control);

	set_irq_msi(irq, desc);
	write_msi_msg(irq, &msg);
	return 0;
}


/**
 * Called when a device no longer needs its MSI interrupts. All
 * MSI interrupts for the device are freed.
 *
 * @irq:    The devices first irq number. There may be multple in sequence.
 */
void arch_teardown_msi_irq(unsigned int irq)
{
	int number_irqs;
	u64 bitmask;
	int index = 0;
	int irq0;

	if ((irq < OCTEON_IRQ_MSI_BIT0)
		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
		      "MSI interrupt (%d)", irq);

	irq -= OCTEON_IRQ_MSI_BIT0;
	index = irq / 64;
	irq0 = irq % 64;

	/*
	 * Count the number of IRQs we need to free by looking at the
	 * msi_multiple_irq_bitmask. Each bit set means that the next
	 * IRQ is also owned by this device.
	 */
	number_irqs = 0;
	while ((irq0 + number_irqs < 64) &&
	       (msi_multiple_irq_bitmask[index]
		& (1ull << (irq0 + number_irqs))))
		number_irqs++;
	number_irqs++;
	/* Mask with one bit for each IRQ */
	bitmask = (1 << number_irqs) - 1;
	/* Shift the mask to the correct bit location */
	bitmask <<= irq0;
	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
		      "interrupt (%d) not in use", irq);

	/* Checks are done, update the in use bitmask */
	spin_lock(&msi_free_irq_bitmask_lock);
	msi_free_irq_bitmask[index] &= ~bitmask;
	msi_multiple_irq_bitmask[index] &= ~bitmask;
	spin_unlock(&msi_free_irq_bitmask_lock);
}

static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);

static u64 msi_rcv_reg[4];
static u64 mis_ena_reg[4];

static void octeon_irq_msi_enable_pcie(unsigned int irq)
{
	u64 en;
	unsigned long flags;
	int msi_number = irq - OCTEON_IRQ_MSI_BIT0;
	int irq_index = msi_number >> 6;
	int irq_bit = msi_number & 0x3f;

	raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
	en = cvmx_read_csr(mis_ena_reg[irq_index]);
	en |= 1ull << irq_bit;
	cvmx_write_csr(mis_ena_reg[irq_index], en);
	cvmx_read_csr(mis_ena_reg[irq_index]);
	raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}

static void octeon_irq_msi_disable_pcie(unsigned int irq)
{
	u64 en;
	unsigned long flags;
	int msi_number = irq - OCTEON_IRQ_MSI_BIT0;
	int irq_index = msi_number >> 6;
	int irq_bit = msi_number & 0x3f;

	raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
	en = cvmx_read_csr(mis_ena_reg[irq_index]);
	en &= ~(1ull << irq_bit);
	cvmx_write_csr(mis_ena_reg[irq_index], en);
	cvmx_read_csr(mis_ena_reg[irq_index]);
	raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}

static struct irq_chip octeon_irq_chip_msi_pcie = {
	.name = "MSI",
	.enable = octeon_irq_msi_enable_pcie,
	.disable = octeon_irq_msi_disable_pcie,
};

static void octeon_irq_msi_enable_pci(unsigned int irq)
{
	/*
	 * Octeon PCI doesn't have the ability to mask/unmask MSI
	 * interrupts individually. Instead of masking/unmasking them
	 * in groups of 16, we simple assume MSI devices are well
	 * behaved. MSI interrupts are always enable and the ACK is
	 * assumed to be enough
	 */
}

static void octeon_irq_msi_disable_pci(unsigned int irq)
{
	/* See comment in enable */
}

static struct irq_chip octeon_irq_chip_msi_pci = {
	.name = "MSI",
	.enable = octeon_irq_msi_enable_pci,
	.disable = octeon_irq_msi_disable_pci,
};

/*
 * Called by the interrupt handling code when an MSI interrupt
 * occurs.
 */
static irqreturn_t __octeon_msi_do_interrupt(int index, u64 msi_bits)
{
	int irq;
	int bit;

	bit = fls64(msi_bits);
	if (bit) {
		bit--;
		/* Acknowledge it first. */
		cvmx_write_csr(msi_rcv_reg[index], 1ull << bit);

		irq = bit + OCTEON_IRQ_MSI_BIT0 + 64 * index;
		do_IRQ(irq);
		return IRQ_HANDLED;
	}
	return IRQ_NONE;
}

#define OCTEON_MSI_INT_HANDLER_X(x)					\
static irqreturn_t octeon_msi_interrupt##x(int cpl, void *dev_id)	\
{									\
	u64 msi_bits = cvmx_read_csr(msi_rcv_reg[(x)]);			\
	return __octeon_msi_do_interrupt((x), msi_bits);		\
}

/*
 * Create octeon_msi_interrupt{0-3} function body
 */
OCTEON_MSI_INT_HANDLER_X(0);
OCTEON_MSI_INT_HANDLER_X(1);
OCTEON_MSI_INT_HANDLER_X(2);
OCTEON_MSI_INT_HANDLER_X(3);

/*
 * Initializes the MSI interrupt handling code
 */
int __init octeon_msi_initialize(void)
{
	int irq;
	struct irq_chip *msi;

	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
		msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0;
		msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1;
		msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2;
		msi_rcv_reg[3] = CVMX_PEXP_NPEI_MSI_RCV3;
		mis_ena_reg[0] = CVMX_PEXP_NPEI_MSI_ENB0;
		mis_ena_reg[1] = CVMX_PEXP_NPEI_MSI_ENB1;
		mis_ena_reg[2] = CVMX_PEXP_NPEI_MSI_ENB2;
		mis_ena_reg[3] = CVMX_PEXP_NPEI_MSI_ENB3;
		msi = &octeon_irq_chip_msi_pcie;
	} else {
		msi_rcv_reg[0] = CVMX_NPI_NPI_MSI_RCV;
#define INVALID_GENERATE_ADE 0x8700000000000000ULL;
		msi_rcv_reg[1] = INVALID_GENERATE_ADE;
		msi_rcv_reg[2] = INVALID_GENERATE_ADE;
		msi_rcv_reg[3] = INVALID_GENERATE_ADE;
		mis_ena_reg[0] = INVALID_GENERATE_ADE;
		mis_ena_reg[1] = INVALID_GENERATE_ADE;
		mis_ena_reg[2] = INVALID_GENERATE_ADE;
		mis_ena_reg[3] = INVALID_GENERATE_ADE;
		msi = &octeon_irq_chip_msi_pci;
	}

	for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_LAST; irq++)
		set_irq_chip_and_handler(irq, msi, handle_simple_irq);

	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0,
				0, "MSI[0:63]", octeon_msi_interrupt0))
			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt1,
				0, "MSI[64:127]", octeon_msi_interrupt1))
			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt2,
				0, "MSI[127:191]", octeon_msi_interrupt2))
			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt3,
				0, "MSI[192:255]", octeon_msi_interrupt3))
			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");

		msi_irq_size = 256;
	} else if (octeon_is_pci_host()) {
		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0,
				0, "MSI[0:15]", octeon_msi_interrupt0))
			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt0,
				0, "MSI[16:31]", octeon_msi_interrupt0))
			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt0,
				0, "MSI[32:47]", octeon_msi_interrupt0))
			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");

		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt0,
				0, "MSI[48:63]", octeon_msi_interrupt0))
			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
		msi_irq_size = 64;
	}
	return 0;
}
subsys_initcall(octeon_msi_initialize);