| Komal Shah | ad4e09b | 2006-09-29 01:59:19 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * linux/drivers/input/keyboard/omap-keypad.c | 
|  | 3 | * | 
|  | 4 | * OMAP Keypad Driver | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 2003 Nokia Corporation | 
|  | 7 | * Written by Timo Teräs <ext-timo.teras@nokia.com> | 
|  | 8 | * | 
|  | 9 | * Added support for H2 & H3 Keypad | 
|  | 10 | * Copyright (C) 2004 Texas Instruments | 
|  | 11 | * | 
|  | 12 | * This program is free software; you can redistribute it and/or modify | 
|  | 13 | * it under the terms of the GNU General Public License as published by | 
|  | 14 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 15 | * (at your option) any later version. | 
|  | 16 | * | 
|  | 17 | * This program is distributed in the hope that it will be useful, | 
|  | 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | 20 | * GNU General Public License for more details. | 
|  | 21 | * | 
|  | 22 | * You should have received a copy of the GNU General Public License | 
|  | 23 | * along with this program; if not, write to the Free Software | 
|  | 24 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | 25 | */ | 
|  | 26 |  | 
|  | 27 | #include <linux/module.h> | 
|  | 28 | #include <linux/init.h> | 
|  | 29 | #include <linux/interrupt.h> | 
|  | 30 | #include <linux/types.h> | 
|  | 31 | #include <linux/input.h> | 
|  | 32 | #include <linux/kernel.h> | 
|  | 33 | #include <linux/delay.h> | 
|  | 34 | #include <linux/platform_device.h> | 
|  | 35 | #include <linux/mutex.h> | 
|  | 36 | #include <linux/errno.h> | 
|  | 37 | #include <asm/arch/gpio.h> | 
|  | 38 | #include <asm/arch/keypad.h> | 
|  | 39 | #include <asm/arch/menelaus.h> | 
|  | 40 | #include <asm/irq.h> | 
|  | 41 | #include <asm/hardware.h> | 
|  | 42 | #include <asm/io.h> | 
|  | 43 | #include <asm/mach-types.h> | 
|  | 44 | #include <asm/arch/mux.h> | 
|  | 45 |  | 
|  | 46 | #undef NEW_BOARD_LEARNING_MODE | 
|  | 47 |  | 
|  | 48 | static void omap_kp_tasklet(unsigned long); | 
|  | 49 | static void omap_kp_timer(unsigned long); | 
|  | 50 |  | 
|  | 51 | static unsigned char keypad_state[8]; | 
|  | 52 | static DEFINE_MUTEX(kp_enable_mutex); | 
|  | 53 | static int kp_enable = 1; | 
|  | 54 | static int kp_cur_group = -1; | 
|  | 55 |  | 
|  | 56 | struct omap_kp { | 
|  | 57 | struct input_dev *input; | 
|  | 58 | struct timer_list timer; | 
|  | 59 | int irq; | 
|  | 60 | unsigned int rows; | 
|  | 61 | unsigned int cols; | 
|  | 62 | unsigned long delay; | 
|  | 63 | unsigned int debounce; | 
|  | 64 | }; | 
|  | 65 |  | 
|  | 66 | DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0); | 
|  | 67 |  | 
|  | 68 | static int *keymap; | 
|  | 69 | static unsigned int *row_gpios; | 
|  | 70 | static unsigned int *col_gpios; | 
|  | 71 |  | 
|  | 72 | #ifdef CONFIG_ARCH_OMAP2 | 
|  | 73 | static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value) | 
|  | 74 | { | 
|  | 75 | int col; | 
|  | 76 | for (col = 0; col < omap_kp->cols; col++) { | 
|  | 77 | if (value & (1 << col)) | 
|  | 78 | omap_set_gpio_dataout(col_gpios[col], 1); | 
|  | 79 | else | 
|  | 80 | omap_set_gpio_dataout(col_gpios[col], 0); | 
|  | 81 | } | 
|  | 82 | } | 
|  | 83 |  | 
|  | 84 | static u8 get_row_gpio_val(struct omap_kp *omap_kp) | 
|  | 85 | { | 
|  | 86 | int row; | 
|  | 87 | u8 value = 0; | 
|  | 88 |  | 
|  | 89 | for (row = 0; row < omap_kp->rows; row++) { | 
|  | 90 | if (omap_get_gpio_datain(row_gpios[row])) | 
|  | 91 | value |= (1 << row); | 
|  | 92 | } | 
|  | 93 | return value; | 
|  | 94 | } | 
|  | 95 | #else | 
|  | 96 | #define		set_col_gpio_val(x, y)	do {} while (0) | 
|  | 97 | #define		get_row_gpio_val(x)	0 | 
|  | 98 | #endif | 
|  | 99 |  | 
| David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 100 | static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) | 
| Komal Shah | ad4e09b | 2006-09-29 01:59:19 -0700 | [diff] [blame] | 101 | { | 
|  | 102 | struct omap_kp *omap_kp = dev_id; | 
|  | 103 |  | 
|  | 104 | /* disable keyboard interrupt and schedule for handling */ | 
|  | 105 | if (cpu_is_omap24xx()) { | 
|  | 106 | int i; | 
|  | 107 | for (i = 0; i < omap_kp->rows; i++) | 
|  | 108 | disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
|  | 109 | } else | 
|  | 110 | /* disable keyboard interrupt and schedule for handling */ | 
|  | 111 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 112 |  | 
|  | 113 | tasklet_schedule(&kp_tasklet); | 
|  | 114 |  | 
|  | 115 | return IRQ_HANDLED; | 
|  | 116 | } | 
|  | 117 |  | 
|  | 118 | static void omap_kp_timer(unsigned long data) | 
|  | 119 | { | 
|  | 120 | tasklet_schedule(&kp_tasklet); | 
|  | 121 | } | 
|  | 122 |  | 
|  | 123 | static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) | 
|  | 124 | { | 
|  | 125 | int col = 0; | 
|  | 126 |  | 
|  | 127 | /* read the keypad status */ | 
|  | 128 | if (cpu_is_omap24xx()) { | 
|  | 129 | int i; | 
|  | 130 | for (i = 0; i < omap_kp->rows; i++) | 
|  | 131 | disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
|  | 132 |  | 
|  | 133 | /* read the keypad status */ | 
|  | 134 | for (col = 0; col < omap_kp->cols; col++) { | 
|  | 135 | set_col_gpio_val(omap_kp, ~(1 << col)); | 
|  | 136 | state[col] = ~(get_row_gpio_val(omap_kp)) & 0x3f; | 
|  | 137 | } | 
|  | 138 | set_col_gpio_val(omap_kp, 0); | 
|  | 139 |  | 
|  | 140 | } else { | 
|  | 141 | /* disable keyboard interrupt and schedule for handling */ | 
|  | 142 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 143 |  | 
|  | 144 | /* read the keypad status */ | 
|  | 145 | omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
|  | 146 | for (col = 0; col < omap_kp->cols; col++) { | 
|  | 147 | omap_writew(~(1 << col) & 0xff, | 
|  | 148 | OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
|  | 149 |  | 
|  | 150 | udelay(omap_kp->delay); | 
|  | 151 |  | 
|  | 152 | state[col] = ~omap_readw(OMAP_MPUIO_BASE + | 
|  | 153 | OMAP_MPUIO_KBR_LATCH) & 0xff; | 
|  | 154 | } | 
|  | 155 | omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
|  | 156 | udelay(2); | 
|  | 157 | } | 
|  | 158 | } | 
|  | 159 |  | 
|  | 160 | static inline int omap_kp_find_key(int col, int row) | 
|  | 161 | { | 
|  | 162 | int i, key; | 
|  | 163 |  | 
|  | 164 | key = KEY(col, row, 0); | 
|  | 165 | for (i = 0; keymap[i] != 0; i++) | 
|  | 166 | if ((keymap[i] & 0xff000000) == key) | 
|  | 167 | return keymap[i] & 0x00ffffff; | 
|  | 168 | return -1; | 
|  | 169 | } | 
|  | 170 |  | 
|  | 171 | static void omap_kp_tasklet(unsigned long data) | 
|  | 172 | { | 
|  | 173 | struct omap_kp *omap_kp_data = (struct omap_kp *) data; | 
|  | 174 | unsigned char new_state[8], changed, key_down = 0; | 
|  | 175 | int col, row; | 
|  | 176 | int spurious = 0; | 
|  | 177 |  | 
|  | 178 | /* check for any changes */ | 
|  | 179 | omap_kp_scan_keypad(omap_kp_data, new_state); | 
|  | 180 |  | 
|  | 181 | /* check for changes and print those */ | 
|  | 182 | for (col = 0; col < omap_kp_data->cols; col++) { | 
|  | 183 | changed = new_state[col] ^ keypad_state[col]; | 
|  | 184 | key_down |= new_state[col]; | 
|  | 185 | if (changed == 0) | 
|  | 186 | continue; | 
|  | 187 |  | 
|  | 188 | for (row = 0; row < omap_kp_data->rows; row++) { | 
|  | 189 | int key; | 
|  | 190 | if (!(changed & (1 << row))) | 
|  | 191 | continue; | 
|  | 192 | #ifdef NEW_BOARD_LEARNING_MODE | 
|  | 193 | printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col, | 
|  | 194 | row, (new_state[col] & (1 << row)) ? | 
|  | 195 | "pressed" : "released"); | 
|  | 196 | #else | 
|  | 197 | key = omap_kp_find_key(col, row); | 
|  | 198 | if (key < 0) { | 
|  | 199 | printk(KERN_WARNING | 
|  | 200 | "omap-keypad: Spurious key event %d-%d\n", | 
|  | 201 | col, row); | 
|  | 202 | /* We scan again after a couple of seconds */ | 
|  | 203 | spurious = 1; | 
|  | 204 | continue; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | if (!(kp_cur_group == (key & GROUP_MASK) || | 
|  | 208 | kp_cur_group == -1)) | 
|  | 209 | continue; | 
|  | 210 |  | 
|  | 211 | kp_cur_group = key & GROUP_MASK; | 
|  | 212 | input_report_key(omap_kp_data->input, key & ~GROUP_MASK, | 
|  | 213 | new_state[col] & (1 << row)); | 
|  | 214 | #endif | 
|  | 215 | } | 
|  | 216 | } | 
|  | 217 | memcpy(keypad_state, new_state, sizeof(keypad_state)); | 
|  | 218 |  | 
|  | 219 | if (key_down) { | 
|  | 220 | int delay = HZ / 20; | 
|  | 221 | /* some key is pressed - keep irq disabled and use timer | 
|  | 222 | * to poll the keypad */ | 
|  | 223 | if (spurious) | 
|  | 224 | delay = 2 * HZ; | 
|  | 225 | mod_timer(&omap_kp_data->timer, jiffies + delay); | 
|  | 226 | } else { | 
|  | 227 | /* enable interrupts */ | 
|  | 228 | if (cpu_is_omap24xx()) { | 
|  | 229 | int i; | 
|  | 230 | for (i = 0; i < omap_kp_data->rows; i++) | 
|  | 231 | enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
|  | 232 | } else { | 
|  | 233 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 234 | kp_cur_group = -1; | 
|  | 235 | } | 
|  | 236 | } | 
|  | 237 | } | 
|  | 238 |  | 
|  | 239 | static ssize_t omap_kp_enable_show(struct device *dev, | 
|  | 240 | struct device_attribute *attr, char *buf) | 
|  | 241 | { | 
|  | 242 | return sprintf(buf, "%u\n", kp_enable); | 
|  | 243 | } | 
|  | 244 |  | 
|  | 245 | static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr, | 
|  | 246 | const char *buf, size_t count) | 
|  | 247 | { | 
|  | 248 | int state; | 
|  | 249 |  | 
|  | 250 | if (sscanf(buf, "%u", &state) != 1) | 
|  | 251 | return -EINVAL; | 
|  | 252 |  | 
|  | 253 | if ((state != 1) && (state != 0)) | 
|  | 254 | return -EINVAL; | 
|  | 255 |  | 
|  | 256 | mutex_lock(&kp_enable_mutex); | 
|  | 257 | if (state != kp_enable) { | 
|  | 258 | if (state) | 
|  | 259 | enable_irq(INT_KEYBOARD); | 
|  | 260 | else | 
|  | 261 | disable_irq(INT_KEYBOARD); | 
|  | 262 | kp_enable = state; | 
|  | 263 | } | 
|  | 264 | mutex_unlock(&kp_enable_mutex); | 
|  | 265 |  | 
|  | 266 | return strnlen(buf, count); | 
|  | 267 | } | 
|  | 268 |  | 
|  | 269 | static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store); | 
|  | 270 |  | 
|  | 271 | #ifdef CONFIG_PM | 
|  | 272 | static int omap_kp_suspend(struct platform_device *dev, pm_message_t state) | 
|  | 273 | { | 
|  | 274 | /* Nothing yet */ | 
|  | 275 |  | 
|  | 276 | return 0; | 
|  | 277 | } | 
|  | 278 |  | 
|  | 279 | static int omap_kp_resume(struct platform_device *dev) | 
|  | 280 | { | 
|  | 281 | /* Nothing yet */ | 
|  | 282 |  | 
|  | 283 | return 0; | 
|  | 284 | } | 
|  | 285 | #else | 
|  | 286 | #define omap_kp_suspend	NULL | 
|  | 287 | #define omap_kp_resume	NULL | 
|  | 288 | #endif | 
|  | 289 |  | 
|  | 290 | static int __init omap_kp_probe(struct platform_device *pdev) | 
|  | 291 | { | 
|  | 292 | struct omap_kp *omap_kp; | 
|  | 293 | struct input_dev *input_dev; | 
|  | 294 | struct omap_kp_platform_data *pdata =  pdev->dev.platform_data; | 
|  | 295 | int i, col_idx, row_idx, irq_idx, ret; | 
|  | 296 |  | 
|  | 297 | if (!pdata->rows || !pdata->cols || !pdata->keymap) { | 
|  | 298 | printk(KERN_ERR "No rows, cols or keymap from pdata\n"); | 
|  | 299 | return -EINVAL; | 
|  | 300 | } | 
|  | 301 |  | 
|  | 302 | omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL); | 
|  | 303 | input_dev = input_allocate_device(); | 
|  | 304 | if (!omap_kp || !input_dev) { | 
|  | 305 | kfree(omap_kp); | 
|  | 306 | input_free_device(input_dev); | 
|  | 307 | return -ENOMEM; | 
|  | 308 | } | 
|  | 309 |  | 
|  | 310 | platform_set_drvdata(pdev, omap_kp); | 
|  | 311 |  | 
|  | 312 | omap_kp->input = input_dev; | 
|  | 313 |  | 
|  | 314 | /* Disable the interrupt for the MPUIO keyboard */ | 
|  | 315 | if (!cpu_is_omap24xx()) | 
|  | 316 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 317 |  | 
|  | 318 | keymap = pdata->keymap; | 
|  | 319 |  | 
|  | 320 | if (pdata->rep) | 
|  | 321 | set_bit(EV_REP, input_dev->evbit); | 
|  | 322 |  | 
|  | 323 | if (pdata->delay) | 
|  | 324 | omap_kp->delay = pdata->delay; | 
|  | 325 |  | 
|  | 326 | if (pdata->row_gpios && pdata->col_gpios) { | 
|  | 327 | row_gpios = pdata->row_gpios; | 
|  | 328 | col_gpios = pdata->col_gpios; | 
|  | 329 | } | 
|  | 330 |  | 
|  | 331 | omap_kp->rows = pdata->rows; | 
|  | 332 | omap_kp->cols = pdata->cols; | 
|  | 333 |  | 
|  | 334 | if (cpu_is_omap24xx()) { | 
|  | 335 | /* Cols: outputs */ | 
|  | 336 | for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) { | 
|  | 337 | if (omap_request_gpio(col_gpios[col_idx]) < 0) { | 
|  | 338 | printk(KERN_ERR "Failed to request" | 
|  | 339 | "GPIO%d for keypad\n", | 
|  | 340 | col_gpios[col_idx]); | 
|  | 341 | goto err1; | 
|  | 342 | } | 
|  | 343 | omap_set_gpio_direction(col_gpios[col_idx], 0); | 
|  | 344 | } | 
|  | 345 | /* Rows: inputs */ | 
|  | 346 | for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) { | 
|  | 347 | if (omap_request_gpio(row_gpios[row_idx]) < 0) { | 
|  | 348 | printk(KERN_ERR "Failed to request" | 
|  | 349 | "GPIO%d for keypad\n", | 
|  | 350 | row_gpios[row_idx]); | 
|  | 351 | goto err2; | 
|  | 352 | } | 
|  | 353 | omap_set_gpio_direction(row_gpios[row_idx], 1); | 
|  | 354 | } | 
|  | 355 | } | 
|  | 356 |  | 
|  | 357 | setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp); | 
|  | 358 |  | 
|  | 359 | /* get the irq and init timer*/ | 
|  | 360 | tasklet_enable(&kp_tasklet); | 
|  | 361 | kp_tasklet.data = (unsigned long) omap_kp; | 
|  | 362 |  | 
|  | 363 | ret = device_create_file(&pdev->dev, &dev_attr_enable); | 
|  | 364 | if (ret < 0) | 
|  | 365 | goto err2; | 
|  | 366 |  | 
|  | 367 | /* setup input device */ | 
|  | 368 | set_bit(EV_KEY, input_dev->evbit); | 
|  | 369 | for (i = 0; keymap[i] != 0; i++) | 
|  | 370 | set_bit(keymap[i] & KEY_MAX, input_dev->keybit); | 
|  | 371 | input_dev->name = "omap-keypad"; | 
|  | 372 | input_dev->phys = "omap-keypad/input0"; | 
|  | 373 | input_dev->cdev.dev = &pdev->dev; | 
|  | 374 | input_dev->private = omap_kp; | 
|  | 375 |  | 
|  | 376 | input_dev->id.bustype = BUS_HOST; | 
|  | 377 | input_dev->id.vendor = 0x0001; | 
|  | 378 | input_dev->id.product = 0x0001; | 
|  | 379 | input_dev->id.version = 0x0100; | 
|  | 380 |  | 
|  | 381 | input_dev->keycode = keymap; | 
|  | 382 | input_dev->keycodesize = sizeof(unsigned int); | 
|  | 383 | input_dev->keycodemax = pdata->keymapsize; | 
|  | 384 |  | 
|  | 385 | ret = input_register_device(omap_kp->input); | 
|  | 386 | if (ret < 0) { | 
|  | 387 | printk(KERN_ERR "Unable to register omap-keypad input device\n"); | 
|  | 388 | goto err3; | 
|  | 389 | } | 
|  | 390 |  | 
|  | 391 | if (pdata->dbounce) | 
|  | 392 | omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING); | 
|  | 393 |  | 
|  | 394 | /* scan current status and enable interrupt */ | 
|  | 395 | omap_kp_scan_keypad(omap_kp, keypad_state); | 
|  | 396 | if (!cpu_is_omap24xx()) { | 
|  | 397 | omap_kp->irq = platform_get_irq(pdev, 0); | 
|  | 398 | if (omap_kp->irq >= 0) { | 
|  | 399 | if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, | 
|  | 400 | "omap-keypad", omap_kp) < 0) | 
|  | 401 | goto err4; | 
|  | 402 | } | 
|  | 403 | omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 404 | } else { | 
|  | 405 | for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { | 
|  | 406 | if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), | 
|  | 407 | omap_kp_interrupt, | 
|  | 408 | IRQF_TRIGGER_FALLING, | 
|  | 409 | "omap-keypad", omap_kp) < 0) | 
|  | 410 | goto err5; | 
|  | 411 | } | 
|  | 412 | } | 
|  | 413 | return 0; | 
|  | 414 | err5: | 
|  | 415 | for (i = irq_idx-1; i >=0; i--) | 
|  | 416 | free_irq(row_gpios[i], 0); | 
|  | 417 | err4: | 
|  | 418 | input_unregister_device(omap_kp->input); | 
|  | 419 | input_dev = NULL; | 
|  | 420 | err3: | 
|  | 421 | device_remove_file(&pdev->dev, &dev_attr_enable); | 
|  | 422 | err2: | 
|  | 423 | for (i = row_idx-1; i >=0; i--) | 
|  | 424 | omap_free_gpio(row_gpios[i]); | 
|  | 425 | err1: | 
|  | 426 | for (i = col_idx-1; i >=0; i--) | 
|  | 427 | omap_free_gpio(col_gpios[i]); | 
|  | 428 |  | 
|  | 429 | kfree(omap_kp); | 
|  | 430 | input_free_device(input_dev); | 
|  | 431 |  | 
|  | 432 | return -EINVAL; | 
|  | 433 | } | 
|  | 434 |  | 
|  | 435 | static int omap_kp_remove(struct platform_device *pdev) | 
|  | 436 | { | 
|  | 437 | struct omap_kp *omap_kp = platform_get_drvdata(pdev); | 
|  | 438 |  | 
|  | 439 | /* disable keypad interrupt handling */ | 
|  | 440 | tasklet_disable(&kp_tasklet); | 
|  | 441 | if (cpu_is_omap24xx()) { | 
|  | 442 | int i; | 
|  | 443 | for (i = 0; i < omap_kp->cols; i++) | 
|  | 444 | omap_free_gpio(col_gpios[i]); | 
|  | 445 | for (i = 0; i < omap_kp->rows; i++) { | 
|  | 446 | omap_free_gpio(row_gpios[i]); | 
|  | 447 | free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); | 
|  | 448 | } | 
|  | 449 | } else { | 
|  | 450 | omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
|  | 451 | free_irq(omap_kp->irq, 0); | 
|  | 452 | } | 
|  | 453 |  | 
|  | 454 | del_timer_sync(&omap_kp->timer); | 
|  | 455 | tasklet_kill(&kp_tasklet); | 
|  | 456 |  | 
|  | 457 | /* unregister everything */ | 
|  | 458 | input_unregister_device(omap_kp->input); | 
|  | 459 |  | 
|  | 460 | kfree(omap_kp); | 
|  | 461 |  | 
|  | 462 | return 0; | 
|  | 463 | } | 
|  | 464 |  | 
|  | 465 | static struct platform_driver omap_kp_driver = { | 
|  | 466 | .probe		= omap_kp_probe, | 
|  | 467 | .remove		= omap_kp_remove, | 
|  | 468 | .suspend	= omap_kp_suspend, | 
|  | 469 | .resume		= omap_kp_resume, | 
|  | 470 | .driver		= { | 
|  | 471 | .name	= "omap-keypad", | 
|  | 472 | }, | 
|  | 473 | }; | 
|  | 474 |  | 
|  | 475 | static int __devinit omap_kp_init(void) | 
|  | 476 | { | 
|  | 477 | printk(KERN_INFO "OMAP Keypad Driver\n"); | 
|  | 478 | return platform_driver_register(&omap_kp_driver); | 
|  | 479 | } | 
|  | 480 |  | 
|  | 481 | static void __exit omap_kp_exit(void) | 
|  | 482 | { | 
|  | 483 | platform_driver_unregister(&omap_kp_driver); | 
|  | 484 | } | 
|  | 485 |  | 
|  | 486 | module_init(omap_kp_init); | 
|  | 487 | module_exit(omap_kp_exit); | 
|  | 488 |  | 
|  | 489 | MODULE_AUTHOR("Timo Teräs"); | 
|  | 490 | MODULE_DESCRIPTION("OMAP Keypad Driver"); | 
|  | 491 | MODULE_LICENSE("GPL"); |