| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | # |
| 2 | # Makefile for the SysKonnect SK-98xx device driver. |
| 3 | # |
| 4 | |
| 5 | |
| 6 | # |
| 7 | # Standalone driver params |
| 8 | # SKPARAM += -DSK_KERNEL_24 |
| 9 | # SKPARAM += -DSK_KERNEL_24_26 |
| 10 | # SKPARAM += -DSK_KERNEL_26 |
| 11 | # SKPARAM += -DSK_KERNEL_22_24 |
| 12 | |
| 13 | obj-$(CONFIG_SK98LIN) += sk98lin.o |
| 14 | sk98lin-objs := \ |
| 15 | skge.o \ |
| 16 | skethtool.o \ |
| 17 | skdim.o \ |
| 18 | skaddr.o \ |
| 19 | skgehwt.o \ |
| 20 | skgeinit.o \ |
| 21 | skgepnmi.o \ |
| 22 | skgesirq.o \ |
| 23 | ski2c.o \ |
| 24 | sklm80.o \ |
| 25 | skqueue.o \ |
| 26 | skrlmt.o \ |
| 27 | sktimer.o \ |
| 28 | skvpd.o \ |
| 29 | skxmac2.o \ |
| 30 | skproc.o \ |
| 31 | skcsum.o |
| 32 | |
| 33 | # DBGDEF = \ |
| 34 | # -DDEBUG |
| 35 | |
| 36 | ifdef DEBUG |
| 37 | DBGDEF += \ |
| 38 | -DSK_DEBUG_CHKMOD=0x00000000L \ |
| 39 | -DSK_DEBUG_CHKCAT=0x00000000L |
| 40 | endif |
| 41 | |
| 42 | |
| 43 | # **** possible debug modules for SK_DEBUG_CHKMOD ***************** |
| 44 | # SK_DBGMOD_MERR 0x00000001L /* general module error indication */ |
| 45 | # SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ |
| 46 | # SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ |
| 47 | # SK_DBGMOD_VPD 0x00000008L /* VPD module */ |
| 48 | # SK_DBGMOD_I2C 0x00000010L /* I2C module */ |
| 49 | # SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ |
| 50 | # SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ |
| 51 | # SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ |
| 52 | # SK_DBGMOD_DRV 0x00010000L /* DRV module */ |
| 53 | |
| 54 | # **** possible debug categories for SK_DEBUG_CHKCAT ************** |
| 55 | # *** common modules *** |
| 56 | # SK_DBGCAT_INIT 0x00000001L module/driver initialization |
| 57 | # SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) |
| 58 | # SK_DBGCAT_ERR 0x00000004L error handling paths |
| 59 | # SK_DBGCAT_TX 0x00000008L transmit path |
| 60 | # SK_DBGCAT_RX 0x00000010L receive path |
| 61 | # SK_DBGCAT_IRQ 0x00000020L general IRQ handling |
| 62 | # SK_DBGCAT_QUEUE 0x00000040L any queue management |
| 63 | # SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump |
| 64 | # SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump |
| 65 | |
| 66 | # *** driver (file skge.c) *** |
| 67 | # SK_DBGCAT_DRV_ENTRY 0x00010000 entry points |
| 68 | # SK_DBGCAT_DRV_??? 0x00020000 not used |
| 69 | # SK_DBGCAT_DRV_MCA 0x00040000 multicast |
| 70 | # SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path |
| 71 | # SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path |
| 72 | # SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime |
| 73 | # SK_DBGCAT_DRV_??? 0x00400000 not used |
| 74 | # SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode |
| 75 | # SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames |
| 76 | # SK_DBGCAT_DRV_ERROR 0x02000000 error conditions |
| 77 | # SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources |
| 78 | # SK_DBGCAT_DRV_EVENT 0x08000000 driver events |
| 79 | |
| 80 | EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) |
| 81 | |
| 82 | clean: |
| 83 | rm -f core *.o *.a *.s |
| 84 | |
| 85 | |
| 86 | |
| 87 | |
| 88 | |
| 89 | |