| Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 1 | /* atlx.c -- common functions for Attansic network drivers | 
 | 2 |  * | 
 | 3 |  * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. | 
 | 4 |  * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> | 
| Jay Cliburn | e8f720f | 2008-05-09 22:12:09 -0500 | [diff] [blame] | 5 |  * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> | 
| Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 6 |  * Copyright(c) 2007 Atheros Corporation. All rights reserved. | 
 | 7 |  * | 
 | 8 |  * Derived from Intel e1000 driver | 
 | 9 |  * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. | 
 | 10 |  * | 
 | 11 |  * This program is free software; you can redistribute it and/or modify it | 
 | 12 |  * under the terms of the GNU General Public License as published by the Free | 
 | 13 |  * Software Foundation; either version 2 of the License, or (at your option) | 
 | 14 |  * any later version. | 
 | 15 |  * | 
 | 16 |  * This program is distributed in the hope that it will be useful, but WITHOUT | 
 | 17 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 | 18 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 | 19 |  * more details. | 
 | 20 |  * | 
 | 21 |  * You should have received a copy of the GNU General Public License along with | 
 | 22 |  * this program; if not, write to the Free Software Foundation, Inc., 59 | 
 | 23 |  * Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 | 24 |  */ | 
 | 25 |  | 
 | 26 | /* Including this file like a header is a temporary hack, I promise. -- CHS */ | 
 | 27 | #ifndef ATLX_C | 
 | 28 | #define ATLX_C | 
 | 29 |  | 
 | 30 | #include <linux/device.h> | 
 | 31 | #include <linux/errno.h> | 
 | 32 | #include <linux/etherdevice.h> | 
 | 33 | #include <linux/if.h> | 
 | 34 | #include <linux/netdevice.h> | 
 | 35 | #include <linux/socket.h> | 
 | 36 | #include <linux/sockios.h> | 
 | 37 | #include <linux/spinlock.h> | 
 | 38 | #include <linux/string.h> | 
 | 39 | #include <linux/types.h> | 
 | 40 | #include <linux/workqueue.h> | 
 | 41 |  | 
 | 42 | #include "atlx.h" | 
 | 43 |  | 
 | 44 | static struct atlx_spi_flash_dev flash_table[] = { | 
 | 45 | /*	MFR_NAME  WRSR  READ  PRGM  WREN  WRDI  RDSR  RDID  SEC_ERS CHIP_ERS */ | 
 | 46 | 	{"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52,   0x62}, | 
 | 47 | 	{"SST",   0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20,   0x60}, | 
 | 48 | 	{"ST",    0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8,   0xC7}, | 
 | 49 | }; | 
 | 50 |  | 
 | 51 | static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) | 
 | 52 | { | 
 | 53 | 	switch (cmd) { | 
 | 54 | 	case SIOCGMIIPHY: | 
 | 55 | 	case SIOCGMIIREG: | 
 | 56 | 	case SIOCSMIIREG: | 
 | 57 | 		return atlx_mii_ioctl(netdev, ifr, cmd); | 
 | 58 | 	default: | 
 | 59 | 		return -EOPNOTSUPP; | 
 | 60 | 	} | 
 | 61 | } | 
 | 62 |  | 
 | 63 | /* | 
 | 64 |  * atlx_set_mac - Change the Ethernet Address of the NIC | 
 | 65 |  * @netdev: network interface device structure | 
 | 66 |  * @p: pointer to an address structure | 
 | 67 |  * | 
 | 68 |  * Returns 0 on success, negative on failure | 
 | 69 |  */ | 
 | 70 | static int atlx_set_mac(struct net_device *netdev, void *p) | 
 | 71 | { | 
 | 72 | 	struct atlx_adapter *adapter = netdev_priv(netdev); | 
 | 73 | 	struct sockaddr *addr = p; | 
 | 74 |  | 
 | 75 | 	if (netif_running(netdev)) | 
 | 76 | 		return -EBUSY; | 
 | 77 |  | 
 | 78 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 79 | 		return -EADDRNOTAVAIL; | 
 | 80 |  | 
 | 81 | 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
 | 82 | 	memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); | 
 | 83 |  | 
 | 84 | 	atlx_set_mac_addr(&adapter->hw); | 
 | 85 | 	return 0; | 
 | 86 | } | 
 | 87 |  | 
 | 88 | static void atlx_check_for_link(struct atlx_adapter *adapter) | 
 | 89 | { | 
 | 90 | 	struct net_device *netdev = adapter->netdev; | 
 | 91 | 	u16 phy_data = 0; | 
 | 92 |  | 
 | 93 | 	spin_lock(&adapter->lock); | 
 | 94 | 	adapter->phy_timer_pending = false; | 
 | 95 | 	atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
 | 96 | 	atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); | 
 | 97 | 	spin_unlock(&adapter->lock); | 
 | 98 |  | 
 | 99 | 	/* notify upper layer link down ASAP */ | 
 | 100 | 	if (!(phy_data & BMSR_LSTATUS)) { | 
 | 101 | 		/* Link Down */ | 
 | 102 | 		if (netif_carrier_ok(netdev)) { | 
 | 103 | 			/* old link state: Up */ | 
 | 104 | 			dev_info(&adapter->pdev->dev, "%s link is down\n", | 
 | 105 | 				netdev->name); | 
 | 106 | 			adapter->link_speed = SPEED_0; | 
 | 107 | 			netif_carrier_off(netdev); | 
| Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 108 | 		} | 
 | 109 | 	} | 
 | 110 | 	schedule_work(&adapter->link_chg_task); | 
 | 111 | } | 
 | 112 |  | 
 | 113 | /* | 
 | 114 |  * atlx_set_multi - Multicast and Promiscuous mode set | 
 | 115 |  * @netdev: network interface device structure | 
 | 116 |  * | 
 | 117 |  * The set_multi entry point is called whenever the multicast address | 
 | 118 |  * list or the network interface flags are updated.  This routine is | 
 | 119 |  * responsible for configuring the hardware for proper multicast, | 
 | 120 |  * promiscuous mode, and all-multi behavior. | 
 | 121 |  */ | 
 | 122 | static void atlx_set_multi(struct net_device *netdev) | 
 | 123 | { | 
 | 124 | 	struct atlx_adapter *adapter = netdev_priv(netdev); | 
 | 125 | 	struct atlx_hw *hw = &adapter->hw; | 
 | 126 | 	struct dev_mc_list *mc_ptr; | 
 | 127 | 	u32 rctl; | 
 | 128 | 	u32 hash_value; | 
 | 129 |  | 
 | 130 | 	/* Check for Promiscuous and All Multicast modes */ | 
 | 131 | 	rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); | 
 | 132 | 	if (netdev->flags & IFF_PROMISC) | 
 | 133 | 		rctl |= MAC_CTRL_PROMIS_EN; | 
 | 134 | 	else if (netdev->flags & IFF_ALLMULTI) { | 
 | 135 | 		rctl |= MAC_CTRL_MC_ALL_EN; | 
 | 136 | 		rctl &= ~MAC_CTRL_PROMIS_EN; | 
 | 137 | 	} else | 
 | 138 | 		rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); | 
 | 139 |  | 
 | 140 | 	iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); | 
 | 141 |  | 
 | 142 | 	/* clear the old settings from the multicast hash table */ | 
 | 143 | 	iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); | 
 | 144 | 	iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); | 
 | 145 |  | 
 | 146 | 	/* compute mc addresses' hash value ,and put it into hash table */ | 
 | 147 | 	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { | 
 | 148 | 		hash_value = atlx_hash_mc_addr(hw, mc_ptr->dmi_addr); | 
 | 149 | 		atlx_hash_set(hw, hash_value); | 
 | 150 | 	} | 
 | 151 | } | 
 | 152 |  | 
 | 153 | /* | 
 | 154 |  * atlx_irq_enable - Enable default interrupt generation settings | 
 | 155 |  * @adapter: board private structure | 
 | 156 |  */ | 
 | 157 | static void atlx_irq_enable(struct atlx_adapter *adapter) | 
 | 158 | { | 
 | 159 | 	iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); | 
 | 160 | 	ioread32(adapter->hw.hw_addr + REG_IMR); | 
 | 161 | } | 
 | 162 |  | 
 | 163 | /* | 
 | 164 |  * atlx_irq_disable - Mask off interrupt generation on the NIC | 
 | 165 |  * @adapter: board private structure | 
 | 166 |  */ | 
 | 167 | static void atlx_irq_disable(struct atlx_adapter *adapter) | 
 | 168 | { | 
 | 169 | 	iowrite32(0, adapter->hw.hw_addr + REG_IMR); | 
 | 170 | 	ioread32(adapter->hw.hw_addr + REG_IMR); | 
 | 171 | 	synchronize_irq(adapter->pdev->irq); | 
 | 172 | } | 
 | 173 |  | 
 | 174 | static void atlx_clear_phy_int(struct atlx_adapter *adapter) | 
 | 175 | { | 
 | 176 | 	u16 phy_data; | 
 | 177 | 	unsigned long flags; | 
 | 178 |  | 
 | 179 | 	spin_lock_irqsave(&adapter->lock, flags); | 
 | 180 | 	atlx_read_phy_reg(&adapter->hw, 19, &phy_data); | 
 | 181 | 	spin_unlock_irqrestore(&adapter->lock, flags); | 
 | 182 | } | 
 | 183 |  | 
 | 184 | /* | 
| Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 185 |  * atlx_tx_timeout - Respond to a Tx Hang | 
 | 186 |  * @netdev: network interface device structure | 
 | 187 |  */ | 
 | 188 | static void atlx_tx_timeout(struct net_device *netdev) | 
 | 189 | { | 
 | 190 | 	struct atlx_adapter *adapter = netdev_priv(netdev); | 
 | 191 | 	/* Do the reset outside of interrupt context */ | 
 | 192 | 	schedule_work(&adapter->tx_timeout_task); | 
 | 193 | } | 
 | 194 |  | 
 | 195 | /* | 
 | 196 |  * atlx_link_chg_task - deal with link change event Out of interrupt context | 
 | 197 |  */ | 
 | 198 | static void atlx_link_chg_task(struct work_struct *work) | 
 | 199 | { | 
 | 200 | 	struct atlx_adapter *adapter; | 
 | 201 | 	unsigned long flags; | 
 | 202 |  | 
 | 203 | 	adapter = container_of(work, struct atlx_adapter, link_chg_task); | 
 | 204 |  | 
 | 205 | 	spin_lock_irqsave(&adapter->lock, flags); | 
 | 206 | 	atlx_check_link(adapter); | 
 | 207 | 	spin_unlock_irqrestore(&adapter->lock, flags); | 
 | 208 | } | 
 | 209 |  | 
 | 210 | static void atlx_vlan_rx_register(struct net_device *netdev, | 
 | 211 | 	struct vlan_group *grp) | 
 | 212 | { | 
 | 213 | 	struct atlx_adapter *adapter = netdev_priv(netdev); | 
 | 214 | 	unsigned long flags; | 
 | 215 | 	u32 ctrl; | 
 | 216 |  | 
 | 217 | 	spin_lock_irqsave(&adapter->lock, flags); | 
 | 218 | 	/* atlx_irq_disable(adapter); FIXME: confirm/remove */ | 
 | 219 | 	adapter->vlgrp = grp; | 
 | 220 |  | 
 | 221 | 	if (grp) { | 
 | 222 | 		/* enable VLAN tag insert/strip */ | 
 | 223 | 		ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); | 
 | 224 | 		ctrl |= MAC_CTRL_RMV_VLAN; | 
 | 225 | 		iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); | 
 | 226 | 	} else { | 
 | 227 | 		/* disable VLAN tag insert/strip */ | 
 | 228 | 		ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); | 
 | 229 | 		ctrl &= ~MAC_CTRL_RMV_VLAN; | 
 | 230 | 		iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); | 
 | 231 | 	} | 
 | 232 |  | 
 | 233 | 	/* atlx_irq_enable(adapter); FIXME */ | 
 | 234 | 	spin_unlock_irqrestore(&adapter->lock, flags); | 
 | 235 | } | 
 | 236 |  | 
 | 237 | static void atlx_restore_vlan(struct atlx_adapter *adapter) | 
 | 238 | { | 
 | 239 | 	atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp); | 
 | 240 | } | 
 | 241 |  | 
| Jay Cliburn | 305282b | 2008-02-02 19:50:04 -0600 | [diff] [blame] | 242 | #endif /* ATLX_C */ |