Timur Tabi | 30be4c9 | 2010-07-02 17:25:03 -0500 | [diff] [blame] | 1 | /* |
| 2 | * P1022 DS 36Bit Physical Address Map Device Tree Source |
| 3 | * |
| 4 | * Copyright 2010 Freescale Semiconductor, Inc. |
| 5 | * |
| 6 | * This file is licensed under the terms of the GNU General Public License |
| 7 | * version 2. This program is licensed "as is" without any warranty of any |
| 8 | * kind, whether express or implied. |
| 9 | */ |
| 10 | |
| 11 | /dts-v1/; |
| 12 | / { |
| 13 | model = "fsl,P1022"; |
| 14 | compatible = "fsl,P1022DS"; |
| 15 | #address-cells = <2>; |
| 16 | #size-cells = <2>; |
| 17 | interrupt-parent = <&mpic>; |
| 18 | |
| 19 | aliases { |
| 20 | ethernet0 = &enet0; |
| 21 | ethernet1 = &enet1; |
| 22 | serial0 = &serial0; |
| 23 | serial1 = &serial1; |
| 24 | pci0 = &pci0; |
| 25 | pci1 = &pci1; |
| 26 | pci2 = &pci2; |
| 27 | }; |
| 28 | |
| 29 | cpus { |
| 30 | #address-cells = <1>; |
| 31 | #size-cells = <0>; |
| 32 | |
| 33 | PowerPC,P1022@0 { |
| 34 | device_type = "cpu"; |
| 35 | reg = <0x0>; |
| 36 | next-level-cache = <&L2>; |
| 37 | }; |
| 38 | |
| 39 | PowerPC,P1022@1 { |
| 40 | device_type = "cpu"; |
| 41 | reg = <0x1>; |
| 42 | next-level-cache = <&L2>; |
| 43 | }; |
| 44 | }; |
| 45 | |
| 46 | memory { |
| 47 | device_type = "memory"; |
| 48 | }; |
| 49 | |
| 50 | localbus@fffe05000 { |
| 51 | #address-cells = <2>; |
| 52 | #size-cells = <1>; |
| 53 | compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; |
| 54 | reg = <0 0xffe05000 0 0x1000>; |
| 55 | interrupts = <19 2>; |
| 56 | |
| 57 | ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 |
| 58 | 0x1 0x0 0xf 0xe0000000 0x08000000 |
| 59 | 0x2 0x0 0x0 0xffa00000 0x00040000 |
| 60 | 0x3 0x0 0xf 0xffdf0000 0x00008000>; |
| 61 | |
| 62 | nor@0,0 { |
| 63 | #address-cells = <1>; |
| 64 | #size-cells = <1>; |
| 65 | compatible = "cfi-flash"; |
| 66 | reg = <0x0 0x0 0x8000000>; |
| 67 | bank-width = <2>; |
| 68 | device-width = <1>; |
| 69 | |
| 70 | partition@0 { |
| 71 | reg = <0x0 0x03000000>; |
| 72 | label = "ramdisk-nor"; |
| 73 | read-only; |
| 74 | }; |
| 75 | |
| 76 | partition@3000000 { |
| 77 | reg = <0x03000000 0x00e00000>; |
| 78 | label = "diagnostic-nor"; |
| 79 | read-only; |
| 80 | }; |
| 81 | |
| 82 | partition@3e00000 { |
| 83 | reg = <0x03e00000 0x00200000>; |
| 84 | label = "dink-nor"; |
| 85 | read-only; |
| 86 | }; |
| 87 | |
| 88 | partition@4000000 { |
| 89 | reg = <0x04000000 0x00400000>; |
| 90 | label = "kernel-nor"; |
| 91 | read-only; |
| 92 | }; |
| 93 | |
| 94 | partition@4400000 { |
| 95 | reg = <0x04400000 0x03b00000>; |
| 96 | label = "jffs2-nor"; |
| 97 | }; |
| 98 | |
| 99 | partition@7f00000 { |
| 100 | reg = <0x07f00000 0x00080000>; |
| 101 | label = "dtb-nor"; |
| 102 | read-only; |
| 103 | }; |
| 104 | |
| 105 | partition@7f80000 { |
| 106 | reg = <0x07f80000 0x00080000>; |
| 107 | label = "u-boot-nor"; |
| 108 | read-only; |
| 109 | }; |
| 110 | }; |
| 111 | |
| 112 | nand@2,0 { |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <1>; |
| 115 | compatible = "fsl,elbc-fcm-nand"; |
| 116 | reg = <0x2 0x0 0x40000>; |
| 117 | |
| 118 | partition@0 { |
| 119 | reg = <0x0 0x02000000>; |
| 120 | label = "u-boot-nand"; |
| 121 | read-only; |
| 122 | }; |
| 123 | |
| 124 | partition@2000000 { |
| 125 | reg = <0x02000000 0x10000000>; |
| 126 | label = "jffs2-nand"; |
| 127 | }; |
| 128 | |
| 129 | partition@12000000 { |
| 130 | reg = <0x12000000 0x10000000>; |
| 131 | label = "ramdisk-nand"; |
| 132 | read-only; |
| 133 | }; |
| 134 | |
| 135 | partition@22000000 { |
| 136 | reg = <0x22000000 0x04000000>; |
| 137 | label = "kernel-nand"; |
| 138 | }; |
| 139 | |
| 140 | partition@26000000 { |
| 141 | reg = <0x26000000 0x01000000>; |
| 142 | label = "dtb-nand"; |
| 143 | read-only; |
| 144 | }; |
| 145 | |
| 146 | partition@27000000 { |
| 147 | reg = <0x27000000 0x19000000>; |
| 148 | label = "reserved-nand"; |
| 149 | }; |
| 150 | }; |
| 151 | }; |
| 152 | |
| 153 | soc@fffe00000 { |
| 154 | #address-cells = <1>; |
| 155 | #size-cells = <1>; |
| 156 | device_type = "soc"; |
| 157 | compatible = "fsl,p1022-immr", "simple-bus"; |
| 158 | ranges = <0x0 0xf 0xffe00000 0x100000>; |
| 159 | bus-frequency = <0>; // Filled out by uboot. |
| 160 | |
| 161 | ecm-law@0 { |
| 162 | compatible = "fsl,ecm-law"; |
| 163 | reg = <0x0 0x1000>; |
| 164 | fsl,num-laws = <12>; |
| 165 | }; |
| 166 | |
| 167 | ecm@1000 { |
| 168 | compatible = "fsl,p1022-ecm", "fsl,ecm"; |
| 169 | reg = <0x1000 0x1000>; |
| 170 | interrupts = <16 2>; |
| 171 | }; |
| 172 | |
| 173 | memory-controller@2000 { |
| 174 | compatible = "fsl,p1022-memory-controller"; |
| 175 | reg = <0x2000 0x1000>; |
| 176 | interrupts = <16 2>; |
| 177 | }; |
| 178 | |
| 179 | i2c@3000 { |
| 180 | #address-cells = <1>; |
| 181 | #size-cells = <0>; |
| 182 | cell-index = <0>; |
| 183 | compatible = "fsl-i2c"; |
| 184 | reg = <0x3000 0x100>; |
| 185 | interrupts = <43 2>; |
| 186 | dfsrr; |
| 187 | }; |
| 188 | |
| 189 | i2c@3100 { |
| 190 | #address-cells = <1>; |
| 191 | #size-cells = <0>; |
| 192 | cell-index = <1>; |
| 193 | compatible = "fsl-i2c"; |
| 194 | reg = <0x3100 0x100>; |
| 195 | interrupts = <43 2>; |
| 196 | dfsrr; |
| 197 | |
| 198 | wm8776:codec@1a { |
| 199 | compatible = "wlf,wm8776"; |
| 200 | reg = <0x1a>; |
| 201 | /* MCLK source is a stand-alone oscillator */ |
| 202 | clock-frequency = <12288000>; |
| 203 | }; |
| 204 | }; |
| 205 | |
| 206 | serial0: serial@4500 { |
| 207 | cell-index = <0>; |
| 208 | device_type = "serial"; |
| 209 | compatible = "ns16550"; |
| 210 | reg = <0x4500 0x100>; |
| 211 | clock-frequency = <0>; |
| 212 | interrupts = <42 2>; |
| 213 | }; |
| 214 | |
| 215 | serial1: serial@4600 { |
| 216 | cell-index = <1>; |
| 217 | device_type = "serial"; |
| 218 | compatible = "ns16550"; |
| 219 | reg = <0x4600 0x100>; |
| 220 | clock-frequency = <0>; |
| 221 | interrupts = <42 2>; |
| 222 | }; |
| 223 | |
| 224 | spi@7000 { |
| 225 | cell-index = <0>; |
| 226 | #address-cells = <1>; |
| 227 | #size-cells = <0>; |
| 228 | compatible = "fsl,espi"; |
| 229 | reg = <0x7000 0x1000>; |
| 230 | interrupts = <59 0x2>; |
| 231 | espi,num-ss-bits = <4>; |
| 232 | mode = "cpu"; |
| 233 | |
| 234 | fsl_m25p80@0 { |
| 235 | #address-cells = <1>; |
| 236 | #size-cells = <1>; |
| 237 | compatible = "fsl,espi-flash"; |
| 238 | reg = <0>; |
| 239 | linux,modalias = "fsl_m25p80"; |
| 240 | spi-max-frequency = <40000000>; /* input clock */ |
| 241 | partition@0 { |
| 242 | label = "u-boot-spi"; |
| 243 | reg = <0x00000000 0x00100000>; |
| 244 | read-only; |
| 245 | }; |
| 246 | partition@100000 { |
| 247 | label = "kernel-spi"; |
| 248 | reg = <0x00100000 0x00500000>; |
| 249 | read-only; |
| 250 | }; |
| 251 | partition@600000 { |
| 252 | label = "dtb-spi"; |
| 253 | reg = <0x00600000 0x00100000>; |
| 254 | read-only; |
| 255 | }; |
| 256 | partition@700000 { |
| 257 | label = "file system-spi"; |
| 258 | reg = <0x00700000 0x00900000>; |
| 259 | }; |
| 260 | }; |
| 261 | }; |
| 262 | |
| 263 | ssi@15000 { |
| 264 | compatible = "fsl,mpc8610-ssi"; |
| 265 | cell-index = <0>; |
| 266 | reg = <0x15000 0x100>; |
| 267 | interrupts = <75 2>; |
| 268 | fsl,mode = "i2s-slave"; |
| 269 | codec-handle = <&wm8776>; |
| 270 | fsl,playback-dma = <&dma00>; |
| 271 | fsl,capture-dma = <&dma01>; |
| 272 | fsl,fifo-depth = <16>; |
| 273 | }; |
| 274 | |
| 275 | dma@c300 { |
| 276 | #address-cells = <1>; |
| 277 | #size-cells = <1>; |
| 278 | compatible = "fsl,eloplus-dma"; |
| 279 | reg = <0xc300 0x4>; |
| 280 | ranges = <0x0 0xc100 0x200>; |
| 281 | cell-index = <1>; |
| 282 | dma00: dma-channel@0 { |
| 283 | compatible = "fsl,eloplus-dma-channel"; |
| 284 | reg = <0x0 0x80>; |
| 285 | cell-index = <0>; |
| 286 | interrupts = <76 2>; |
| 287 | }; |
| 288 | dma01: dma-channel@80 { |
| 289 | compatible = "fsl,eloplus-dma-channel"; |
| 290 | reg = <0x80 0x80>; |
| 291 | cell-index = <1>; |
| 292 | interrupts = <77 2>; |
| 293 | }; |
| 294 | dma-channel@100 { |
| 295 | compatible = "fsl,eloplus-dma-channel"; |
| 296 | reg = <0x100 0x80>; |
| 297 | cell-index = <2>; |
| 298 | interrupts = <78 2>; |
| 299 | }; |
| 300 | dma-channel@180 { |
| 301 | compatible = "fsl,eloplus-dma-channel"; |
| 302 | reg = <0x180 0x80>; |
| 303 | cell-index = <3>; |
| 304 | interrupts = <79 2>; |
| 305 | }; |
| 306 | }; |
| 307 | |
| 308 | gpio: gpio-controller@f000 { |
| 309 | #gpio-cells = <2>; |
| 310 | compatible = "fsl,mpc8572-gpio"; |
| 311 | reg = <0xf000 0x100>; |
| 312 | interrupts = <47 0x2>; |
| 313 | gpio-controller; |
| 314 | }; |
| 315 | |
| 316 | L2: l2-cache-controller@20000 { |
| 317 | compatible = "fsl,p1022-l2-cache-controller"; |
| 318 | reg = <0x20000 0x1000>; |
| 319 | cache-line-size = <32>; // 32 bytes |
| 320 | cache-size = <0x40000>; // L2, 256K |
| 321 | interrupts = <16 2>; |
| 322 | }; |
| 323 | |
| 324 | dma@21300 { |
| 325 | #address-cells = <1>; |
| 326 | #size-cells = <1>; |
| 327 | compatible = "fsl,eloplus-dma"; |
| 328 | reg = <0x21300 0x4>; |
| 329 | ranges = <0x0 0x21100 0x200>; |
| 330 | cell-index = <0>; |
| 331 | dma-channel@0 { |
| 332 | compatible = "fsl,eloplus-dma-channel"; |
| 333 | reg = <0x0 0x80>; |
| 334 | cell-index = <0>; |
| 335 | interrupts = <20 2>; |
| 336 | }; |
| 337 | dma-channel@80 { |
| 338 | compatible = "fsl,eloplus-dma-channel"; |
| 339 | reg = <0x80 0x80>; |
| 340 | cell-index = <1>; |
| 341 | interrupts = <21 2>; |
| 342 | }; |
| 343 | dma-channel@100 { |
| 344 | compatible = "fsl,eloplus-dma-channel"; |
| 345 | reg = <0x100 0x80>; |
| 346 | cell-index = <2>; |
| 347 | interrupts = <22 2>; |
| 348 | }; |
| 349 | dma-channel@180 { |
| 350 | compatible = "fsl,eloplus-dma-channel"; |
| 351 | reg = <0x180 0x80>; |
| 352 | cell-index = <3>; |
| 353 | interrupts = <23 2>; |
| 354 | }; |
| 355 | }; |
| 356 | |
| 357 | usb@22000 { |
| 358 | #address-cells = <1>; |
| 359 | #size-cells = <0>; |
| 360 | compatible = "fsl-usb2-dr"; |
| 361 | reg = <0x22000 0x1000>; |
| 362 | interrupts = <28 0x2>; |
| 363 | phy_type = "ulpi"; |
| 364 | }; |
| 365 | |
| 366 | mdio@24000 { |
| 367 | #address-cells = <1>; |
| 368 | #size-cells = <0>; |
| 369 | compatible = "fsl,etsec2-mdio"; |
| 370 | reg = <0x24000 0x1000 0xb0030 0x4>; |
| 371 | |
| 372 | phy0: ethernet-phy@0 { |
| 373 | interrupts = <3 1>; |
| 374 | reg = <0x1>; |
| 375 | }; |
| 376 | phy1: ethernet-phy@1 { |
| 377 | interrupts = <9 1>; |
| 378 | reg = <0x2>; |
| 379 | }; |
| 380 | }; |
| 381 | |
| 382 | mdio@25000 { |
| 383 | #address-cells = <1>; |
| 384 | #size-cells = <0>; |
| 385 | compatible = "fsl,etsec2-mdio"; |
| 386 | reg = <0x25000 0x1000 0xb1030 0x4>; |
| 387 | }; |
| 388 | |
| 389 | enet0: ethernet@B0000 { |
| 390 | #address-cells = <1>; |
| 391 | #size-cells = <1>; |
| 392 | cell-index = <0>; |
| 393 | device_type = "network"; |
| 394 | model = "eTSEC"; |
| 395 | compatible = "fsl,etsec2"; |
| 396 | fsl,num_rx_queues = <0x8>; |
| 397 | fsl,num_tx_queues = <0x8>; |
| 398 | fsl,magic-packet; |
| 399 | fsl,wake-on-filer; |
| 400 | local-mac-address = [ 00 00 00 00 00 00 ]; |
| 401 | fixed-link = <1 1 1000 0 0>; |
| 402 | phy-handle = <&phy0>; |
| 403 | phy-connection-type = "rgmii-id"; |
| 404 | queue-group@0{ |
| 405 | #address-cells = <1>; |
| 406 | #size-cells = <1>; |
| 407 | reg = <0xB0000 0x1000>; |
| 408 | interrupts = <29 2 30 2 34 2>; |
| 409 | }; |
| 410 | queue-group@1{ |
| 411 | #address-cells = <1>; |
| 412 | #size-cells = <1>; |
| 413 | reg = <0xB4000 0x1000>; |
| 414 | interrupts = <17 2 18 2 24 2>; |
| 415 | }; |
| 416 | }; |
| 417 | |
| 418 | enet1: ethernet@B1000 { |
| 419 | #address-cells = <1>; |
| 420 | #size-cells = <1>; |
| 421 | cell-index = <0>; |
| 422 | device_type = "network"; |
| 423 | model = "eTSEC"; |
| 424 | compatible = "fsl,etsec2"; |
| 425 | fsl,num_rx_queues = <0x8>; |
| 426 | fsl,num_tx_queues = <0x8>; |
| 427 | local-mac-address = [ 00 00 00 00 00 00 ]; |
| 428 | fixed-link = <1 1 1000 0 0>; |
| 429 | phy-handle = <&phy1>; |
| 430 | phy-connection-type = "rgmii-id"; |
| 431 | queue-group@0{ |
| 432 | #address-cells = <1>; |
| 433 | #size-cells = <1>; |
| 434 | reg = <0xB1000 0x1000>; |
| 435 | interrupts = <35 2 36 2 40 2>; |
| 436 | }; |
| 437 | queue-group@1{ |
| 438 | #address-cells = <1>; |
| 439 | #size-cells = <1>; |
| 440 | reg = <0xB5000 0x1000>; |
| 441 | interrupts = <51 2 52 2 67 2>; |
| 442 | }; |
| 443 | }; |
| 444 | |
| 445 | sdhci@2e000 { |
| 446 | compatible = "fsl,p1022-esdhc", "fsl,esdhc"; |
| 447 | reg = <0x2e000 0x1000>; |
| 448 | interrupts = <72 0x2>; |
| 449 | fsl,sdhci-auto-cmd12; |
| 450 | /* Filled in by U-Boot */ |
| 451 | clock-frequency = <0>; |
| 452 | }; |
| 453 | |
| 454 | crypto@30000 { |
| 455 | compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", |
| 456 | "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", |
| 457 | "fsl,sec2.0"; |
| 458 | reg = <0x30000 0x10000>; |
| 459 | interrupts = <45 2 58 2>; |
| 460 | fsl,num-channels = <4>; |
| 461 | fsl,channel-fifo-len = <24>; |
| 462 | fsl,exec-units-mask = <0x97c>; |
| 463 | fsl,descriptor-types-mask = <0x3a30abf>; |
| 464 | }; |
| 465 | |
| 466 | sata@18000 { |
| 467 | compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; |
| 468 | reg = <0x18000 0x1000>; |
| 469 | cell-index = <1>; |
| 470 | interrupts = <74 0x2>; |
| 471 | }; |
| 472 | |
| 473 | sata@19000 { |
| 474 | compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; |
| 475 | reg = <0x19000 0x1000>; |
| 476 | cell-index = <2>; |
| 477 | interrupts = <41 0x2>; |
| 478 | }; |
| 479 | |
| 480 | power@e0070{ |
| 481 | compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; |
| 482 | reg = <0xe0070 0x20>; |
| 483 | }; |
| 484 | |
| 485 | display@10000 { |
| 486 | compatible = "fsl,diu", "fsl,p1022-diu"; |
| 487 | reg = <0x10000 1000>; |
| 488 | interrupts = <64 2>; |
| 489 | }; |
| 490 | |
| 491 | timer@41100 { |
| 492 | compatible = "fsl,mpic-global-timer"; |
| 493 | reg = <0x41100 0x204>; |
| 494 | interrupts = <0xf7 0x2>; |
| 495 | }; |
| 496 | |
| 497 | mpic: pic@40000 { |
| 498 | interrupt-controller; |
| 499 | #address-cells = <0>; |
| 500 | #interrupt-cells = <2>; |
| 501 | reg = <0x40000 0x40000>; |
| 502 | compatible = "chrp,open-pic"; |
| 503 | device_type = "open-pic"; |
| 504 | }; |
| 505 | |
| 506 | msi@41600 { |
| 507 | compatible = "fsl,p1022-msi", "fsl,mpic-msi"; |
| 508 | reg = <0x41600 0x80>; |
| 509 | msi-available-ranges = <0 0x100>; |
| 510 | interrupts = < |
| 511 | 0xe0 0 |
| 512 | 0xe1 0 |
| 513 | 0xe2 0 |
| 514 | 0xe3 0 |
| 515 | 0xe4 0 |
| 516 | 0xe5 0 |
| 517 | 0xe6 0 |
| 518 | 0xe7 0>; |
| 519 | }; |
| 520 | |
| 521 | global-utilities@e0000 { //global utilities block |
| 522 | compatible = "fsl,p1022-guts"; |
| 523 | reg = <0xe0000 0x1000>; |
| 524 | fsl,has-rstcr; |
| 525 | }; |
| 526 | }; |
| 527 | |
| 528 | pci0: pcie@fffe09000 { |
| 529 | compatible = "fsl,p1022-pcie"; |
| 530 | device_type = "pci"; |
| 531 | #interrupt-cells = <1>; |
| 532 | #size-cells = <2>; |
| 533 | #address-cells = <3>; |
| 534 | reg = <0xf 0xffe09000 0 0x1000>; |
| 535 | bus-range = <0 255>; |
| 536 | ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000 |
| 537 | 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; |
| 538 | clock-frequency = <33333333>; |
| 539 | interrupts = <16 2>; |
| 540 | interrupt-map-mask = <0xf800 0 0 7>; |
| 541 | interrupt-map = < |
| 542 | /* IDSEL 0x0 */ |
| 543 | 0000 0 0 1 &mpic 4 1 |
| 544 | 0000 0 0 2 &mpic 5 1 |
| 545 | 0000 0 0 3 &mpic 6 1 |
| 546 | 0000 0 0 4 &mpic 7 1 |
| 547 | >; |
| 548 | pcie@0 { |
| 549 | reg = <0x0 0x0 0x0 0x0 0x0>; |
| 550 | #size-cells = <2>; |
| 551 | #address-cells = <3>; |
| 552 | device_type = "pci"; |
| 553 | ranges = <0x2000000 0x0 0xe0000000 |
| 554 | 0x2000000 0x0 0xe0000000 |
| 555 | 0x0 0x20000000 |
| 556 | |
| 557 | 0x1000000 0x0 0x0 |
| 558 | 0x1000000 0x0 0x0 |
| 559 | 0x0 0x100000>; |
| 560 | }; |
| 561 | }; |
| 562 | |
| 563 | pci1: pcie@fffe0a000 { |
| 564 | compatible = "fsl,p1022-pcie"; |
| 565 | device_type = "pci"; |
| 566 | #interrupt-cells = <1>; |
| 567 | #size-cells = <2>; |
| 568 | #address-cells = <3>; |
| 569 | reg = <0xf 0xffe0a000 0 0x1000>; |
| 570 | bus-range = <0 255>; |
| 571 | ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000 |
| 572 | 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; |
| 573 | clock-frequency = <33333333>; |
| 574 | interrupts = <16 2>; |
| 575 | interrupt-map-mask = <0xf800 0 0 7>; |
| 576 | interrupt-map = < |
| 577 | /* IDSEL 0x0 */ |
| 578 | 0000 0 0 1 &mpic 0 1 |
| 579 | 0000 0 0 2 &mpic 1 1 |
| 580 | 0000 0 0 3 &mpic 2 1 |
| 581 | 0000 0 0 4 &mpic 3 1 |
| 582 | >; |
| 583 | pcie@0 { |
| 584 | reg = <0x0 0x0 0x0 0x0 0x0>; |
| 585 | #size-cells = <2>; |
| 586 | #address-cells = <3>; |
| 587 | device_type = "pci"; |
| 588 | ranges = <0x2000000 0x0 0xe0000000 |
| 589 | 0x2000000 0x0 0xe0000000 |
| 590 | 0x0 0x20000000 |
| 591 | |
| 592 | 0x1000000 0x0 0x0 |
| 593 | 0x1000000 0x0 0x0 |
| 594 | 0x0 0x100000>; |
| 595 | }; |
| 596 | }; |
| 597 | |
| 598 | |
| 599 | pci2: pcie@fffe0b000 { |
| 600 | compatible = "fsl,p1022-pcie"; |
| 601 | device_type = "pci"; |
| 602 | #interrupt-cells = <1>; |
| 603 | #size-cells = <2>; |
| 604 | #address-cells = <3>; |
| 605 | reg = <0xf 0xffe0b000 0 0x1000>; |
| 606 | bus-range = <0 255>; |
| 607 | ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 |
| 608 | 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; |
| 609 | clock-frequency = <33333333>; |
| 610 | interrupts = <16 2>; |
| 611 | interrupt-map-mask = <0xf800 0 0 7>; |
| 612 | interrupt-map = < |
| 613 | /* IDSEL 0x0 */ |
| 614 | 0000 0 0 1 &mpic 8 1 |
| 615 | 0000 0 0 2 &mpic 9 1 |
| 616 | 0000 0 0 3 &mpic 10 1 |
| 617 | 0000 0 0 4 &mpic 11 1 |
| 618 | >; |
| 619 | pcie@0 { |
| 620 | reg = <0x0 0x0 0x0 0x0 0x0>; |
| 621 | #size-cells = <2>; |
| 622 | #address-cells = <3>; |
| 623 | device_type = "pci"; |
| 624 | ranges = <0x2000000 0x0 0xe0000000 |
| 625 | 0x2000000 0x0 0xe0000000 |
| 626 | 0x0 0x20000000 |
| 627 | |
| 628 | 0x1000000 0x0 0x0 |
| 629 | 0x1000000 0x0 0x0 |
| 630 | 0x0 0x100000>; |
| 631 | }; |
| 632 | }; |
| 633 | }; |