| Daniel Mack | 38ab18c | 2012-09-05 11:04:36 +0200 | [diff] [blame^] | 1 | SPI-GPIO devicetree bindings |
| 2 | |
| 3 | Required properties: |
| 4 | |
| 5 | - compatible: should be set to "spi-gpio" |
| 6 | - #address-cells: should be set to <0x1> |
| 7 | - ranges |
| 8 | - gpio-sck: GPIO spec for the SCK line to use |
| 9 | - gpio-miso: GPIO spec for the MISO line to use |
| 10 | - gpio-mosi: GPIO spec for the MOSI line to use |
| 11 | - cs-gpios: GPIOs to use for chipselect lines |
| 12 | - num-chipselects: number of chipselect lines |
| 13 | |
| 14 | Example: |
| 15 | |
| 16 | spi { |
| 17 | compatible = "spi-gpio"; |
| 18 | #address-cells = <0x1>; |
| 19 | ranges; |
| 20 | |
| 21 | gpio-sck = <&gpio 95 0>; |
| 22 | gpio-miso = <&gpio 98 0>; |
| 23 | gpio-mosi = <&gpio 97 0>; |
| 24 | cs-gpios = <&gpio 125 0>; |
| 25 | num-chipselects = <1>; |
| 26 | |
| 27 | /* clients */ |
| 28 | }; |
| 29 | |