arch/sh/kernel/head_32.S

/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $
 *
 *  arch/sh/kernel/head.S
 *
 *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
 *  Copyright (C) 2010  Matt Fleming
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Head.S contains the SH exception handlers and startup code.
 */
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/mmu.h>
#include <cpu/mmu_context.h>

#ifdef CONFIG_CPU_SH4A
#define SYNCO()		synco

#define PREFI(label, reg)	\
	mov.l	label, reg;	\
	prefi	@reg
#else
#define SYNCO()
#define PREFI(label, reg)
#endif

	.section	.empty_zero_page, "aw"
ENTRY(empty_zero_page)
	.long	1		/* MOUNT_ROOT_RDONLY */
	.long	0		/* RAMDISK_FLAGS */
	.long	0x0200		/* ORIG_ROOT_DEV */
	.long	1		/* LOADER_TYPE */
	.long	0x00000000	/* INITRD_START */
	.long	0x00000000	/* INITRD_SIZE */
#ifdef CONFIG_32BIT
	.long	0x53453f00 + 32	/* "SE?" = 32 bit */
#else
	.long	0x53453f00 + 29	/* "SE?" = 29 bit */
#endif
1:
	.skip	PAGE_SIZE - empty_zero_page - 1b

	__HEAD

/*
 * Condition at the entry of _stext:
 *
 *   BSC has already been initialized.
 *   INTC may or may not be initialized.
 *   VBR may or may not be initialized.
 *   MMU may or may not be initialized.
 *   Cache may or may not be initialized.
 *   Hardware (including on-chip modules) may or may not be initialized. 
 *
 */
ENTRY(_stext)
	!			Initialize Status Register
	mov.l	1f, r0		! MD=1, RB=0, BL=0, IMASK=0xF
	ldc	r0, sr
	!			Initialize global interrupt mask
#ifdef CONFIG_CPU_HAS_SR_RB
	mov	#0, r0
	ldc	r0, r6_bank
#endif
	
	/*
	 * Prefetch if possible to reduce cache miss penalty.
	 *
	 * We do this early on for SH-4A as a micro-optimization,
	 * as later on we will have speculative execution enabled
	 * and this will become less of an issue.
	 */
	PREFI(5f, r0)
	PREFI(6f, r0)

	!
	mov.l	2f, r0
	mov	r0, r15		! Set initial r15 (stack pointer)
#ifdef CONFIG_CPU_HAS_SR_RB
	mov.l	7f, r0
	ldc	r0, r7_bank	! ... and initial thread_info
#endif

#if defined(CONFIG_PMB) && !defined(CONFIG_PMB_LEGACY)
	/*
	 * Reconfigure the initial PMB mappings setup by the hardware.
	 *
	 * When we boot in 32-bit MMU mode there are 2 PMB entries already
	 * setup for us.
	 *
	 * Entry       VPN	   PPN	    V	SZ	C	UB	WT
	 * ---------------------------------------------------------------
	 *   0	    0x80000000 0x00000000   1  512MB	1	0	1
	 *   1	    0xA0000000 0x00000000   1  512MB	0	0	0
	 *
	 * But we reprogram them here because we want complete control over
	 * our address space and the initial mappings may not map PAGE_OFFSET
	 * to __MEMORY_START (or even map all of our RAM).
	 *
	 * Once we've setup cached and uncached mappings for all of RAM we
	 * clear the rest of the PMB entries.
	 *
	 * This clearing also deals with the fact that PMB entries can persist
	 * across reboots. The PMB could have been left in any state when the
	 * reboot occurred, so to be safe we clear all entries and start with
	 * with a clean slate.
	 */

	mov.l	.LMMUCR, r1	/* Flush the TLB */
	mov.l	@r1, r0
	or	#MMUCR_TI, r0
	mov.l	r0, @r1

	mov.l	.LMEMORY_SIZE, r5
	mov	r5, r7

	mov	#PMB_E_SHIFT, r0
	mov	#0x1, r4
	shld	r0, r4

	mov.l	.LFIRST_DATA_ENTRY, r0
	mov.l	.LPMB_DATA, r1
	mov.l	.LFIRST_ADDR_ENTRY, r2
	mov.l	.LPMB_ADDR, r3

	mov	#0, r10

	/*
	 * r0 = PMB_DATA data field
	 * r1 = PMB_DATA address field
	 * r2 = PMB_ADDR data field
	 * r3 = PMB_ADDR address field
	 * r4 = PMB_E_SHIFT
	 * r5 = remaining amount of RAM to map
	 * r6 = PMB mapping size we're trying to use
	 * r7 = cached_to_uncached
	 * r8 = scratch register
	 * r9 = scratch register
	 * r10 = number of PMB entries we've setup
	 */
.L512:
	mov	#(512 >> 4), r6
	shll16	r6
	shll8	r6

	cmp/hi	r5, r6
	bt	.L128

	mov	#(PMB_SZ_512M >> 2), r9
	shll2	r9

	/*
	 * Cached mapping
	 */
	mov	#PMB_C, r8
	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov.l	r2, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	/*
	 * Uncached mapping
	 */
	mov	#(PMB_UB >> 8), r8
	shll8	r8

	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov	r2, r8
	add	r7, r8
	mov.l	r8, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	sub	r6, r5
	add	r6, r0
	add	r6, r2

	bra	.L512

.L128:
	mov	#(128 >> 4), r6
	shll16	r6
	shll8	r6

	cmp/hi	r5, r6
	bt	.L64

	mov	#(PMB_SZ_128M >> 2), r9
	shll2	r9

	/*
	 * Cached mapping
	 */
	mov	#PMB_C, r8
	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov.l	r2, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	/*
	 * Uncached mapping
	 */
	mov	#(PMB_UB >> 8), r8
	shll8	r8

	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov	r2, r8
	add	r7, r8
	mov.l	r8, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	sub	r6, r5
	add	r6, r0
	add	r6, r2

	bra	.L128

.L64:
	mov	#(64 >> 4), r6
	shll16	r6
	shll8	r6

	cmp/hi	r5, r6
	bt	.Ldone

	mov	#(PMB_SZ_64M >> 2), r9
	shll2	r9

	/*
	 * Cached mapping
	 */
	mov	#PMB_C, r8
	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov.l	r2, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	/*
	 * Uncached mapping
	 */
	mov	#(PMB_UB >> 8), r8
	shll8	r8

	or	r0, r8
	or	r9, r8
	mov.l	r8, @r1
	mov	r2, r8
	add	r7, r8
	mov.l	r8, @r3

	add	r4, r1		/* Increment to the next PMB_DATA entry */
	add	r4, r3		/* Increment to the next PMB_ADDR entry */

	add	#1, r10		/* Increment number of PMB entries */

	sub	r6, r5
	add	r6, r0
	add	r6, r2

	bra	.L64

.Ldone:
	/* Update cached_to_uncached */
	mov.l	.Lcached_to_uncached, r0
	mov.l	r7, @r0

	/*
	 * Clear the remaining PMB entries.
	 *
	 * r3 = entry to begin clearing from
	 * r10 = number of entries we've setup so far
	 */
	mov	#0, r1
	mov	#PMB_ENTRY_MAX, r0

.Lagain:
	mov.l	r1, @r3		/* Clear PMB_ADDR entry */
	add	#1, r10		/* Increment the loop counter */
	cmp/eq	r0, r10
	bf/s	.Lagain
	 add	r4, r3		/* Increment to the next PMB_ADDR entry */

	mov.l	6f, r0
	icbi	@r0

#endif /* !CONFIG_PMB_LEGACY */

#ifndef CONFIG_SH_NO_BSS_INIT
	/*
	 * Don't clear BSS if running on slow platforms such as an RTL simulation,
	 * remote memory via SHdebug link, etc.  For these the memory can be guaranteed
	 * to be all zero on boot anyway.
	 */
				! Clear BSS area
#ifdef CONFIG_SMP	
	mov.l	3f, r0
	cmp/eq	#0, r0		! skip clear if set to zero
	bt	10f
#endif
	
	mov.l	3f, r1
	add	#4, r1
	mov.l	4f, r2
	mov	#0, r0
9:	cmp/hs	r2, r1
	bf/s	9b		! while (r1 < r2)
	 mov.l	r0,@-r2

10:		
#endif

	!			Additional CPU initialization
	mov.l	6f, r0
	jsr	@r0
	 nop

	SYNCO()			! Wait for pending instructions..
	
	!			Start kernel
	mov.l	5f, r0
	jmp	@r0
	 nop

	.balign 4
#if defined(CONFIG_CPU_SH2)
1:	.long	0x000000F0		! IMASK=0xF
#else
1:	.long	0x400080F0		! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
#endif
ENTRY(stack_start)
2:	.long	init_thread_union+THREAD_SIZE
3:	.long	__bss_start
4:	.long	_end
5:	.long	start_kernel
6:	.long	sh_cpu_init
7:	.long	init_thread_union

#if defined(CONFIG_PMB) && !defined(CONFIG_PMB_LEGACY)
.LPMB_ADDR:		.long	PMB_ADDR
.LPMB_DATA:		.long	PMB_DATA
.LFIRST_ADDR_ENTRY:	.long	PAGE_OFFSET | PMB_V
.LFIRST_DATA_ENTRY:	.long	__MEMORY_START | PMB_V
.LMMUCR:		.long	MMUCR
.Lcached_to_uncached:	.long	cached_to_uncached
.LMEMORY_SIZE:		.long	__MEMORY_SIZE
#endif