| Johannes Berg | f3d9478 | 2006-06-21 15:42:43 +0200 | [diff] [blame] | 1 | /* | 
 | 2 |  * soundbus generic definitions | 
 | 3 |  * | 
 | 4 |  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> | 
 | 5 |  * | 
 | 6 |  * GPL v2, can be found in COPYING. | 
 | 7 |  */ | 
 | 8 | #ifndef __SOUNDBUS_H | 
 | 9 | #define __SOUNDBUS_H | 
 | 10 |  | 
 | 11 | #include <asm/of_device.h> | 
 | 12 | #include <sound/pcm.h> | 
 | 13 | #include <linux/list.h> | 
 | 14 |  | 
 | 15 |  | 
 | 16 | /* When switching from master to slave or the other way around, | 
 | 17 |  * you don't want to have the codec chip acting as clock source | 
 | 18 |  * while the bus still is. | 
 | 19 |  * More importantly, while switch from slave to master, you need | 
 | 20 |  * to turn off the chip's master function first, but then there's | 
 | 21 |  * no clock for a while and other chips might reset, so we notify | 
 | 22 |  * their drivers after having switched. | 
 | 23 |  * The constants here are codec-point of view, so when we switch | 
 | 24 |  * the soundbus to master we tell the codec we're going to switch | 
 | 25 |  * and give it CLOCK_SWITCH_PREPARE_SLAVE! | 
 | 26 |  */ | 
 | 27 | enum clock_switch { | 
 | 28 | 	CLOCK_SWITCH_PREPARE_SLAVE, | 
 | 29 | 	CLOCK_SWITCH_PREPARE_MASTER, | 
 | 30 | 	CLOCK_SWITCH_SLAVE, | 
 | 31 | 	CLOCK_SWITCH_MASTER, | 
 | 32 | 	CLOCK_SWITCH_NOTIFY, | 
 | 33 | }; | 
 | 34 |  | 
 | 35 | /* information on a transfer the codec can take */ | 
 | 36 | struct transfer_info { | 
 | 37 | 	u64 formats;		/* SNDRV_PCM_FMTBIT_* */ | 
 | 38 | 	unsigned int rates;	/* SNDRV_PCM_RATE_* */ | 
 | 39 | 	/* flags */ | 
 | 40 | 	u32 transfer_in:1, /* input = 1, output = 0 */ | 
 | 41 | 	    must_be_clock_source:1; | 
 | 42 | 	/* for codecs to distinguish among their TIs */ | 
 | 43 | 	int tag; | 
 | 44 | }; | 
 | 45 |  | 
 | 46 | struct codec_info_item { | 
 | 47 | 	struct codec_info *codec; | 
 | 48 | 	void *codec_data; | 
 | 49 | 	struct soundbus_dev *sdev; | 
 | 50 | 	/* internal, to be used by the soundbus provider */ | 
 | 51 | 	struct list_head list; | 
 | 52 | }; | 
 | 53 |  | 
 | 54 | /* for prepare, where the codecs need to know | 
 | 55 |  * what we're going to drive the bus with */ | 
 | 56 | struct bus_info { | 
 | 57 | 	/* see below */ | 
 | 58 | 	int sysclock_factor; | 
 | 59 | 	int bus_factor; | 
 | 60 | }; | 
 | 61 |  | 
 | 62 | /* information on the codec itself, plus function pointers */ | 
 | 63 | struct codec_info { | 
 | 64 | 	/* the module this lives in */ | 
 | 65 | 	struct module *owner; | 
 | 66 |  | 
 | 67 | 	/* supported transfer possibilities, array terminated by | 
 | 68 | 	 * formats or rates being 0. */ | 
 | 69 | 	struct transfer_info *transfers; | 
 | 70 |  | 
 | 71 | 	/* Master clock speed factor | 
 | 72 | 	 * to be used (master clock speed = sysclock_factor * sampling freq) | 
 | 73 | 	 * Unused if the soundbus provider has no such notion. | 
 | 74 | 	 */ | 
 | 75 | 	int sysclock_factor; | 
 | 76 |  | 
 | 77 | 	/* Bus factor, bus clock speed = bus_factor * sampling freq) | 
 | 78 | 	 * Unused if the soundbus provider has no such notion. | 
 | 79 | 	 */ | 
 | 80 | 	int bus_factor; | 
 | 81 |  | 
 | 82 | 	/* operations */ | 
 | 83 | 	/* clock switching, see above */ | 
 | 84 | 	int (*switch_clock)(struct codec_info_item *cii, | 
 | 85 | 			    enum clock_switch clock); | 
 | 86 |  | 
 | 87 | 	/* called for each transfer_info when the user | 
 | 88 | 	 * opens the pcm device to determine what the | 
 | 89 | 	 * hardware can support at this point in time. | 
 | 90 | 	 * That can depend on other user-switchable controls. | 
 | 91 | 	 * Return 1 if usable, 0 if not. | 
 | 92 | 	 * out points to another instance of a transfer_info | 
 | 93 | 	 * which is initialised to the values in *ti, and | 
 | 94 | 	 * it's format and rate values can be modified by | 
 | 95 | 	 * the callback if it is necessary to further restrict | 
 | 96 | 	 * the formats that can be used at the moment, for | 
 | 97 | 	 * example when one codec has multiple logical codec | 
 | 98 | 	 * info structs for multiple inputs. | 
 | 99 | 	 */ | 
 | 100 | 	int (*usable)(struct codec_info_item *cii, | 
 | 101 | 		      struct transfer_info *ti, | 
 | 102 | 		      struct transfer_info *out); | 
 | 103 |  | 
 | 104 | 	/* called when pcm stream is opened, probably not implemented | 
 | 105 | 	 * most of the time since it isn't too useful */ | 
 | 106 | 	int (*open)(struct codec_info_item *cii, | 
 | 107 | 		    struct snd_pcm_substream *substream); | 
 | 108 |  | 
 | 109 | 	/* called when the pcm stream is closed, at this point | 
 | 110 | 	 * the user choices can all be unlocked (see below) */ | 
 | 111 | 	int (*close)(struct codec_info_item *cii, | 
 | 112 | 		     struct snd_pcm_substream *substream); | 
 | 113 |  | 
 | 114 | 	/* if the codec must forbid some user choices because | 
 | 115 | 	 * they are not valid with the substream/transfer info, | 
 | 116 | 	 * it must do so here. Example: no digital output for | 
 | 117 | 	 * incompatible framerate, say 8KHz, on Onyx. | 
 | 118 | 	 * If the selected stuff in the substream is NOT | 
 | 119 | 	 * compatible, you have to reject this call! */ | 
 | 120 | 	int (*prepare)(struct codec_info_item *cii, | 
 | 121 | 		       struct bus_info *bi, | 
 | 122 | 		       struct snd_pcm_substream *substream); | 
 | 123 |  | 
 | 124 | 	/* start() is called before data is pushed to the codec. | 
 | 125 | 	 * Note that start() must be atomic! */ | 
 | 126 | 	int (*start)(struct codec_info_item *cii, | 
 | 127 | 		     struct snd_pcm_substream *substream); | 
 | 128 |  | 
 | 129 | 	/* stop() is called after data is no longer pushed to the codec. | 
 | 130 | 	 * Note that stop() must be atomic! */ | 
 | 131 | 	int (*stop)(struct codec_info_item *cii, | 
 | 132 | 		    struct snd_pcm_substream *substream); | 
 | 133 |  | 
 | 134 | 	int (*suspend)(struct codec_info_item *cii, pm_message_t state); | 
 | 135 | 	int (*resume)(struct codec_info_item *cii); | 
 | 136 | }; | 
 | 137 |  | 
 | 138 | /* information on a soundbus device */ | 
 | 139 | struct soundbus_dev { | 
 | 140 | 	/* the bus it belongs to */ | 
 | 141 | 	struct list_head onbuslist; | 
 | 142 |  | 
 | 143 | 	/* the of device it represents */ | 
 | 144 | 	struct of_device ofdev; | 
 | 145 |  | 
 | 146 | 	/* what modules go by */ | 
 | 147 | 	char modalias[32]; | 
 | 148 |  | 
 | 149 | 	/* These fields must be before attach_codec can be called. | 
 | 150 | 	 * They should be set by the owner of the alsa card object | 
 | 151 | 	 * that is needed, and whoever sets them must make sure | 
 | 152 | 	 * that they are unique within that alsa card object. */ | 
 | 153 | 	char *pcmname; | 
 | 154 | 	int pcmid; | 
 | 155 |  | 
 | 156 | 	/* this is assigned by the soundbus provider in attach_codec */ | 
 | 157 | 	struct snd_pcm *pcm; | 
 | 158 |  | 
 | 159 | 	/* operations */ | 
 | 160 | 	/* attach a codec to this soundbus, give the alsa | 
 | 161 | 	 * card object the PCMs for this soundbus should be in. | 
 | 162 | 	 * The 'data' pointer must be unique, it is used as the | 
 | 163 | 	 * key for detach_codec(). */ | 
 | 164 | 	int (*attach_codec)(struct soundbus_dev *dev, struct snd_card *card, | 
 | 165 | 			    struct codec_info *ci, void *data); | 
 | 166 | 	void (*detach_codec)(struct soundbus_dev *dev, void *data); | 
 | 167 | 	/* TODO: suspend/resume */ | 
 | 168 |  | 
 | 169 | 	/* private for the soundbus provider */ | 
 | 170 | 	struct list_head codec_list; | 
 | 171 | 	u32 have_out:1, have_in:1; | 
 | 172 | }; | 
 | 173 | #define to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev.dev) | 
 | 174 | #define of_to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev) | 
 | 175 |  | 
 | 176 | extern int soundbus_add_one(struct soundbus_dev *dev); | 
 | 177 | extern void soundbus_remove_one(struct soundbus_dev *dev); | 
 | 178 |  | 
 | 179 | extern struct soundbus_dev *soundbus_dev_get(struct soundbus_dev *dev); | 
 | 180 | extern void soundbus_dev_put(struct soundbus_dev *dev); | 
 | 181 |  | 
 | 182 | struct soundbus_driver { | 
 | 183 | 	char *name; | 
 | 184 | 	struct module *owner; | 
 | 185 |  | 
 | 186 | 	/* we don't implement any matching at all */ | 
 | 187 |  | 
 | 188 | 	int	(*probe)(struct soundbus_dev* dev); | 
 | 189 | 	int	(*remove)(struct soundbus_dev* dev); | 
 | 190 |  | 
 | 191 | 	int	(*suspend)(struct soundbus_dev* dev, pm_message_t state); | 
 | 192 | 	int	(*resume)(struct soundbus_dev* dev); | 
 | 193 | 	int	(*shutdown)(struct soundbus_dev* dev); | 
 | 194 |  | 
 | 195 | 	struct device_driver driver; | 
 | 196 | }; | 
 | 197 | #define to_soundbus_driver(drv) container_of(drv,struct soundbus_driver, driver) | 
 | 198 |  | 
 | 199 | extern int soundbus_register_driver(struct soundbus_driver *drv); | 
 | 200 | extern void soundbus_unregister_driver(struct soundbus_driver *drv); | 
 | 201 |  | 
| Johannes Berg | e378ad1 | 2007-03-07 16:23:50 +0100 | [diff] [blame] | 202 | extern struct device_attribute soundbus_dev_attrs[]; | 
 | 203 |  | 
| Johannes Berg | f3d9478 | 2006-06-21 15:42:43 +0200 | [diff] [blame] | 204 | #endif /* __SOUNDBUS_H */ |