| Thomas Abraham | 5a5f508 | 2011-09-13 09:46:05 +0530 | [diff] [blame^] | 1 | * Samsung's I2C controller |
| 2 | |
| 3 | The Samsung's I2C controller is used to interface with I2C devices. |
| 4 | |
| 5 | Required properties: |
| 6 | - compatible: value should be either of the following. |
| 7 | (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c. |
| 8 | (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c. |
| 9 | - reg: physical base address of the controller and length of memory mapped |
| 10 | region. |
| 11 | - interrupts: interrupt number to the cpu. |
| 12 | - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges. |
| 13 | - gpios: The order of the gpios should be the following: <SDA, SCL>. |
| 14 | The gpio specifier depends on the gpio controller. |
| 15 | |
| 16 | Optional properties: |
| 17 | - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not |
| 18 | specified, default value is 0. |
| 19 | - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not |
| 20 | specified, the default value in Hz is 100000. |
| 21 | |
| 22 | Example: |
| 23 | |
| 24 | i2c@13870000 { |
| 25 | compatible = "samsung,s3c2440-i2c"; |
| 26 | reg = <0x13870000 0x100>; |
| 27 | interrupts = <345>; |
| 28 | samsung,i2c-sda-delay = <100>; |
| 29 | samsung,i2c-max-bus-freq = <100000>; |
| 30 | gpios = <&gpd1 2 0 /* SDA */ |
| 31 | &gpd1 3 0 /* SCL */>; |
| 32 | #address-cells = <1>; |
| 33 | #size-cells = <0>; |
| 34 | |
| 35 | wm8994@1a { |
| 36 | compatible = "wlf,wm8994"; |
| 37 | reg = <0x1a>; |
| 38 | }; |
| 39 | }; |