| Fabio Estevam | 5c70cb01 | 2012-10-07 14:12:49 -0300 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright 2012 Freescale Semiconductor, Inc. |
| 3 | * Copyright 2011 Linaro Ltd. |
| 4 | * |
| 5 | * The code contained herein is licensed under the GNU General Public |
| 6 | * License. You may obtain a copy of the GNU General Public License |
| 7 | * Version 2 or later at the following locations: |
| 8 | * |
| 9 | * http://www.opensource.org/licenses/gpl-license.html |
| 10 | * http://www.gnu.org/copyleft/gpl.html |
| 11 | */ |
| 12 | |
| 13 | /dts-v1/; |
| 14 | /include/ "imx6q.dtsi" |
| 15 | |
| 16 | / { |
| 17 | model = "Freescale i.MX6 Quad SABRE Automotive Board"; |
| 18 | compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; |
| 19 | |
| 20 | memory { |
| 21 | reg = <0x10000000 0x80000000>; |
| 22 | }; |
| 23 | |
| 24 | soc { |
| 25 | aips-bus@02000000 { /* AIPS1 */ |
| 26 | iomuxc@020e0000 { |
| 27 | pinctrl-names = "default"; |
| 28 | pinctrl-0 = <&pinctrl_hog>; |
| 29 | |
| 30 | hog { |
| 31 | pinctrl_hog: hoggrp { |
| 32 | fsl,pins = < |
| 33 | 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ |
| 34 | 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ |
| 35 | >; |
| 36 | }; |
| 37 | }; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | aips-bus@02100000 { /* AIPS2 */ |
| 42 | uart4: serial@021f0000 { |
| 43 | pinctrl-names = "default"; |
| 44 | pinctrl-0 = <&pinctrl_uart4_1>; |
| 45 | status = "okay"; |
| 46 | }; |
| 47 | |
| 48 | ethernet@02188000 { |
| 49 | pinctrl-names = "default"; |
| 50 | pinctrl-0 = <&pinctrl_enet_2>; |
| 51 | phy-mode = "rgmii"; |
| 52 | status = "okay"; |
| 53 | }; |
| 54 | |
| 55 | usdhc@02198000 { /* uSDHC3 */ |
| 56 | pinctrl-names = "default"; |
| 57 | pinctrl-0 = <&pinctrl_usdhc3_1>; |
| 58 | cd-gpios = <&gpio6 15 0>; |
| 59 | wp-gpios = <&gpio1 13 0>; |
| 60 | status = "okay"; |
| 61 | }; |
| 62 | }; |
| 63 | }; |
| 64 | }; |