| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * mace.h - definitions for the registers in the "Big Mac" |
| 3 | * Ethernet controller found in PowerMac G3 models. |
| 4 | * |
| 5 | * Copyright (C) 1998 Randy Gobbel. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or |
| 8 | * modify it under the terms of the GNU General Public License |
| 9 | * as published by the Free Software Foundation; either version |
| 10 | * 2 of the License, or (at your option) any later version. |
| 11 | */ |
| 12 | |
| 13 | /* The "Big MAC" appears to have some parts in common with the Sun "Happy Meal" |
| 14 | * (HME) controller. See sunhme.h |
| 15 | */ |
| 16 | |
| 17 | |
| 18 | /* register offsets */ |
| 19 | |
| 20 | /* global status and control */ |
| 21 | #define XIFC 0x000 /* low-level interface control */ |
| 22 | # define TxOutputEnable 0x0001 /* output driver enable */ |
| 23 | # define XIFLoopback 0x0002 /* Loopback-mode XIF enable */ |
| 24 | # define MIILoopback 0x0004 /* Loopback-mode MII enable */ |
| 25 | # define MIILoopbackBits 0x0006 |
| 26 | # define MIIBuffDisable 0x0008 /* MII receive buffer disable */ |
| 27 | # define SQETestEnable 0x0010 /* SQE test enable */ |
| 28 | # define SQETimeWindow 0x03e0 /* SQE time window */ |
| 29 | # define XIFLanceMode 0x0010 /* Lance mode enable */ |
| 30 | # define XIFLanceIPG0 0x03e0 /* Lance mode IPG0 */ |
| 31 | #define TXFIFOCSR 0x100 /* transmit FIFO control */ |
| 32 | # define TxFIFOEnable 0x0001 |
| 33 | #define TXTH 0x110 /* transmit threshold */ |
| 34 | # define TxThreshold 0x0004 |
| 35 | #define RXFIFOCSR 0x120 /* receive FIFO control */ |
| 36 | # define RxFIFOEnable 0x0001 |
| 37 | #define MEMADD 0x130 /* memory address, unknown function */ |
| 38 | #define MEMDATAHI 0x140 /* memory data high, presently unused in driver */ |
| 39 | #define MEMDATALO 0x150 /* memory data low, presently unused in driver */ |
| 40 | #define XCVRIF 0x160 /* transceiver interface control */ |
| 41 | # define COLActiveLow 0x0002 |
| 42 | # define SerialMode 0x0004 |
| 43 | # define ClkBit 0x0008 |
| 44 | # define LinkStatus 0x0100 |
| 45 | #define CHIPID 0x170 /* chip ID */ |
| 46 | #define MIFCSR 0x180 /* ??? */ |
| 47 | #define SROMCSR 0x190 /* SROM control */ |
| 48 | # define ChipSelect 0x0001 |
| 49 | # define Clk 0x0002 |
| 50 | #define TXPNTR 0x1a0 /* transmit pointer */ |
| 51 | #define RXPNTR 0x1b0 /* receive pointer */ |
| 52 | #define STATUS 0x200 /* status--reading this clears it */ |
| 53 | #define INTDISABLE 0x210 /* interrupt enable/disable control */ |
| 54 | /* bits below are the same in both STATUS and INTDISABLE registers */ |
| 55 | # define FrameReceived 0x00000001 /* Received a frame */ |
| 56 | # define RxFrameCntExp 0x00000002 /* Receive frame counter expired */ |
| 57 | # define RxAlignCntExp 0x00000004 /* Align-error counter expired */ |
| 58 | # define RxCRCCntExp 0x00000008 /* CRC-error counter expired */ |
| 59 | # define RxLenCntExp 0x00000010 /* Length-error counter expired */ |
| 60 | # define RxOverFlow 0x00000020 /* Receive FIFO overflow */ |
| 61 | # define RxCodeViolation 0x00000040 /* Code-violation counter expired */ |
| 62 | # define SQETestError 0x00000080 /* Test error in XIF for SQE */ |
| 63 | # define FrameSent 0x00000100 /* Transmitted a frame */ |
| 64 | # define TxUnderrun 0x00000200 /* Transmit FIFO underrun */ |
| 65 | # define TxMaxSizeError 0x00000400 /* Max-packet size error */ |
| 66 | # define TxNormalCollExp 0x00000800 /* Normal-collision counter expired */ |
| 67 | # define TxExcessCollExp 0x00001000 /* Excess-collision counter expired */ |
| 68 | # define TxLateCollExp 0x00002000 /* Late-collision counter expired */ |
| 69 | # define TxNetworkCollExp 0x00004000 /* First-collision counter expired */ |
| 70 | # define TxDeferTimerExp 0x00008000 /* Defer-timer expired */ |
| 71 | # define RxFIFOToHost 0x00010000 /* Data moved from FIFO to host */ |
| 72 | # define RxNoDescriptors 0x00020000 /* No more receive descriptors */ |
| 73 | # define RxDMAError 0x00040000 /* Error during receive DMA */ |
| 74 | # define RxDMALateErr 0x00080000 /* Receive DMA, data late */ |
| 75 | # define RxParityErr 0x00100000 /* Parity error during receive DMA */ |
| 76 | # define RxTagError 0x00200000 /* Tag error during receive DMA */ |
| 77 | # define TxEOPError 0x00400000 /* Tx descriptor did not have EOP set */ |
| 78 | # define MIFIntrEvent 0x00800000 /* MIF is signaling an interrupt */ |
| 79 | # define TxHostToFIFO 0x01000000 /* Data moved from host to FIFO */ |
| 80 | # define TxFIFOAllSent 0x02000000 /* Transmitted all packets in FIFO */ |
| 81 | # define TxDMAError 0x04000000 /* Error during transmit DMA */ |
| 82 | # define TxDMALateError 0x08000000 /* Late error during transmit DMA */ |
| 83 | # define TxParityError 0x10000000 /* Parity error during transmit DMA */ |
| 84 | # define TxTagError 0x20000000 /* Tag error during transmit DMA */ |
| 85 | # define PIOError 0x40000000 /* PIO access got an error */ |
| 86 | # define PIOParityError 0x80000000 /* PIO access got a parity error */ |
| 87 | # define DisableAll 0xffffffff |
| 88 | # define EnableAll 0x00000000 |
| 89 | /* # define NormalIntEvents ~(FrameReceived | FrameSent | TxUnderrun) */ |
| 90 | # define EnableNormal ~(FrameReceived | FrameSent) |
| 91 | # define EnableErrors (FrameReceived | FrameSent) |
| 92 | # define RxErrorMask (RxFrameCntExp | RxAlignCntExp | RxCRCCntExp | \ |
| 93 | RxLenCntExp | RxOverFlow | RxCodeViolation) |
| 94 | # define TxErrorMask (TxUnderrun | TxMaxSizeError | TxExcessCollExp | \ |
| 95 | TxLateCollExp | TxNetworkCollExp | TxDeferTimerExp) |
| 96 | |
| 97 | /* transmit control */ |
| 98 | #define TXRST 0x420 /* transmit reset */ |
| 99 | # define TxResetBit 0x0001 |
| 100 | #define TXCFG 0x430 /* transmit configuration control*/ |
| 101 | # define TxMACEnable 0x0001 /* output driver enable */ |
| 102 | # define TxSlowMode 0x0020 /* enable slow mode */ |
| 103 | # define TxIgnoreColl 0x0040 /* ignore transmit collisions */ |
| 104 | # define TxNoFCS 0x0080 /* do not emit FCS */ |
| 105 | # define TxNoBackoff 0x0100 /* no backoff in case of collisions */ |
| 106 | # define TxFullDuplex 0x0200 /* enable full-duplex */ |
| 107 | # define TxNeverGiveUp 0x0400 /* don't give up on transmits */ |
| 108 | #define IPG1 0x440 /* Inter-packet gap 1 */ |
| 109 | #define IPG2 0x450 /* Inter-packet gap 2 */ |
| 110 | #define ALIMIT 0x460 /* Transmit attempt limit */ |
| 111 | #define SLOT 0x470 /* Transmit slot time */ |
| 112 | #define PALEN 0x480 /* Size of transmit preamble */ |
| 113 | #define PAPAT 0x490 /* Pattern for transmit preamble */ |
| 114 | #define TXSFD 0x4a0 /* Transmit frame delimiter */ |
| 115 | #define JAM 0x4b0 /* Jam size */ |
| 116 | #define TXMAX 0x4c0 /* Transmit max pkt size */ |
| 117 | #define TXMIN 0x4d0 /* Transmit min pkt size */ |
| 118 | #define PAREG 0x4e0 /* Count of transmit peak attempts */ |
| 119 | #define DCNT 0x4f0 /* Transmit defer timer */ |
| 120 | #define NCCNT 0x500 /* Transmit normal-collision counter */ |
| 121 | #define NTCNT 0x510 /* Transmit first-collision counter */ |
| 122 | #define EXCNT 0x520 /* Transmit excess-collision counter */ |
| 123 | #define LTCNT 0x530 /* Transmit late-collision counter */ |
| 124 | #define RSEED 0x540 /* Transmit random number seed */ |
| 125 | #define TXSM 0x550 /* Transmit state machine */ |
| 126 | |
| 127 | /* receive control */ |
| 128 | #define RXRST 0x620 /* receive reset */ |
| 129 | # define RxResetValue 0x0000 |
| 130 | #define RXCFG 0x630 /* receive configuration control */ |
| 131 | # define RxMACEnable 0x0001 /* receiver overall enable */ |
| 132 | # define RxCFGReserved 0x0004 |
| 133 | # define RxPadStripEnab 0x0020 /* enable pad byte stripping */ |
| 134 | # define RxPromiscEnable 0x0040 /* turn on promiscuous mode */ |
| 135 | # define RxNoErrCheck 0x0080 /* disable receive error checking */ |
| 136 | # define RxCRCNoStrip 0x0100 /* disable auto-CRC-stripping */ |
| 137 | # define RxRejectOwnPackets 0x0200 /* don't receive our own packets */ |
| 138 | # define RxGrpPromisck 0x0400 /* enable group promiscuous mode */ |
| 139 | # define RxHashFilterEnable 0x0800 /* enable hash filter */ |
| 140 | # define RxAddrFilterEnable 0x1000 /* enable address filter */ |
| 141 | #define RXMAX 0x640 /* Max receive packet size */ |
| 142 | #define RXMIN 0x650 /* Min receive packet size */ |
| 143 | #define MADD2 0x660 /* our enet address, high part */ |
| 144 | #define MADD1 0x670 /* our enet address, middle part */ |
| 145 | #define MADD0 0x680 /* our enet address, low part */ |
| 146 | #define FRCNT 0x690 /* receive frame counter */ |
| 147 | #define LECNT 0x6a0 /* Receive excess length error counter */ |
| 148 | #define AECNT 0x6b0 /* Receive misaligned error counter */ |
| 149 | #define FECNT 0x6c0 /* Receive CRC error counter */ |
| 150 | #define RXSM 0x6d0 /* Receive state machine */ |
| 151 | #define RXCV 0x6e0 /* Receive code violation */ |
| 152 | |
| 153 | #define BHASH3 0x700 /* multicast hash register */ |
| 154 | #define BHASH2 0x710 /* multicast hash register */ |
| 155 | #define BHASH1 0x720 /* multicast hash register */ |
| 156 | #define BHASH0 0x730 /* multicast hash register */ |
| 157 | |
| 158 | #define AFR2 0x740 /* address filtering setup? */ |
| 159 | #define AFR1 0x750 /* address filtering setup? */ |
| 160 | #define AFR0 0x760 /* address filtering setup? */ |
| 161 | #define AFCR 0x770 /* address filter compare register? */ |
| 162 | # define EnableAllCompares 0x0fff |
| 163 | |
| 164 | /* bits in XIFC */ |