| David Howells | 607ca46 | 2012-10-13 10:46:48 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * include/linux/serial.h | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 1992 by Theodore Ts'o. | 
|  | 5 | * | 
|  | 6 | * Redistribution of this file is permitted under the terms of the GNU | 
|  | 7 | * Public License (GPL) | 
|  | 8 | */ | 
|  | 9 |  | 
|  | 10 | #ifndef _UAPI_LINUX_SERIAL_H | 
|  | 11 | #define _UAPI_LINUX_SERIAL_H | 
|  | 12 |  | 
|  | 13 | #include <linux/types.h> | 
|  | 14 |  | 
|  | 15 | #include <linux/tty_flags.h> | 
|  | 16 |  | 
|  | 17 |  | 
|  | 18 | struct serial_struct { | 
|  | 19 | int	type; | 
|  | 20 | int	line; | 
|  | 21 | unsigned int	port; | 
|  | 22 | int	irq; | 
|  | 23 | int	flags; | 
|  | 24 | int	xmit_fifo_size; | 
|  | 25 | int	custom_divisor; | 
|  | 26 | int	baud_base; | 
|  | 27 | unsigned short	close_delay; | 
|  | 28 | char	io_type; | 
|  | 29 | char	reserved_char[1]; | 
|  | 30 | int	hub6; | 
|  | 31 | unsigned short	closing_wait; /* time to wait before closing */ | 
|  | 32 | unsigned short	closing_wait2; /* no longer used... */ | 
|  | 33 | unsigned char	*iomem_base; | 
|  | 34 | unsigned short	iomem_reg_shift; | 
|  | 35 | unsigned int	port_high; | 
|  | 36 | unsigned long	iomap_base;	/* cookie passed into ioremap */ | 
|  | 37 | }; | 
|  | 38 |  | 
|  | 39 | /* | 
|  | 40 | * For the close wait times, 0 means wait forever for serial port to | 
|  | 41 | * flush its output.  65535 means don't wait at all. | 
|  | 42 | */ | 
|  | 43 | #define ASYNC_CLOSING_WAIT_INF	0 | 
|  | 44 | #define ASYNC_CLOSING_WAIT_NONE	65535 | 
|  | 45 |  | 
|  | 46 | /* | 
|  | 47 | * These are the supported serial types. | 
|  | 48 | */ | 
|  | 49 | #define PORT_UNKNOWN	0 | 
|  | 50 | #define PORT_8250	1 | 
|  | 51 | #define PORT_16450	2 | 
|  | 52 | #define PORT_16550	3 | 
|  | 53 | #define PORT_16550A	4 | 
|  | 54 | #define PORT_CIRRUS     5	/* usurped by cyclades.c */ | 
|  | 55 | #define PORT_16650	6 | 
|  | 56 | #define PORT_16650V2	7 | 
|  | 57 | #define PORT_16750	8 | 
|  | 58 | #define PORT_STARTECH	9	/* usurped by cyclades.c */ | 
|  | 59 | #define PORT_16C950	10	/* Oxford Semiconductor */ | 
|  | 60 | #define PORT_16654	11 | 
|  | 61 | #define PORT_16850	12 | 
|  | 62 | #define PORT_RSA	13	/* RSA-DV II/S card */ | 
|  | 63 | #define PORT_MAX	13 | 
|  | 64 |  | 
|  | 65 | #define SERIAL_IO_PORT	0 | 
|  | 66 | #define SERIAL_IO_HUB6	1 | 
|  | 67 | #define SERIAL_IO_MEM	2 | 
|  | 68 |  | 
|  | 69 | #define UART_CLEAR_FIFO		0x01 | 
|  | 70 | #define UART_USE_FIFO		0x02 | 
|  | 71 | #define UART_STARTECH		0x04 | 
|  | 72 | #define UART_NATSEMI		0x08 | 
|  | 73 |  | 
|  | 74 |  | 
|  | 75 | /* | 
|  | 76 | * Multiport serial configuration structure --- external structure | 
|  | 77 | */ | 
|  | 78 | struct serial_multiport_struct { | 
|  | 79 | int		irq; | 
|  | 80 | int		port1; | 
|  | 81 | unsigned char	mask1, match1; | 
|  | 82 | int		port2; | 
|  | 83 | unsigned char	mask2, match2; | 
|  | 84 | int		port3; | 
|  | 85 | unsigned char	mask3, match3; | 
|  | 86 | int		port4; | 
|  | 87 | unsigned char	mask4, match4; | 
|  | 88 | int		port_monitor; | 
|  | 89 | int	reserved[32]; | 
|  | 90 | }; | 
|  | 91 |  | 
|  | 92 | /* | 
|  | 93 | * Serial input interrupt line counters -- external structure | 
|  | 94 | * Four lines can interrupt: CTS, DSR, RI, DCD | 
|  | 95 | */ | 
|  | 96 | struct serial_icounter_struct { | 
|  | 97 | int cts, dsr, rng, dcd; | 
|  | 98 | int rx, tx; | 
|  | 99 | int frame, overrun, parity, brk; | 
|  | 100 | int buf_overrun; | 
|  | 101 | int reserved[9]; | 
|  | 102 | }; | 
|  | 103 |  | 
|  | 104 | /* | 
|  | 105 | * Serial interface for controlling RS485 settings on chips with suitable | 
|  | 106 | * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your | 
|  | 107 | * platform. The set function returns the new state, with any unsupported bits | 
|  | 108 | * reverted appropriately. | 
|  | 109 | */ | 
|  | 110 |  | 
|  | 111 | struct serial_rs485 { | 
|  | 112 | __u32	flags;			/* RS485 feature flags */ | 
|  | 113 | #define SER_RS485_ENABLED		(1 << 0)	/* If enabled */ | 
|  | 114 | #define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for | 
|  | 115 | RTS pin when | 
|  | 116 | sending */ | 
|  | 117 | #define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for | 
|  | 118 | RTS pin after sent*/ | 
|  | 119 | #define SER_RS485_RX_DURING_TX		(1 << 4) | 
|  | 120 | __u32	delay_rts_before_send;	/* Delay before send (milliseconds) */ | 
|  | 121 | __u32	delay_rts_after_send;	/* Delay after send (milliseconds) */ | 
|  | 122 | __u32	padding[5];		/* Memory is cheap, new structs | 
|  | 123 | are a royal PITA .. */ | 
|  | 124 | }; | 
|  | 125 |  | 
|  | 126 | #endif /* _UAPI_LINUX_SERIAL_H */ |